Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Gap”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

The Building Business Network (B-Biz): Addressing Gaps in the High-Performance Building Technology Market, Especially for Underserved Customers

Increased market intelligence and business model innovation is needed to build contractor confidence in high-performance building technologies in order to increase the speed and scale of adoption to meet the U.S. Department of Energy's building stock decarbonization goals. Although there have been important innovations in energy efficiency, affordability, and decarbonization of building technologies, consumers are not purchasing these technologies at the necessary speed and scale partially due to a gap in institutional understanding around barriers contractors face in providing and servicing these technologies. Small businesses in this market must mitigate risk around high-performance building technologies, limiting their opportunities in the market and impacting the rate of adoption. The Building Business Network (B-Biz) aims to provide high-performance building technology solutions to underserved customers by collaborating with local small businesses that provide and service high-performance building technologies in communities with the lowest rates of adoption. This research explores the current market, the importance of business models, and the opportunity to utilize small businesses to address market gaps in underserved communities.

B-Biz↗

Small gap magnets and vacuum chambers for eRHIC

eRHIC[1][2][3], a future high luminosity electron-ion collider at Brookhaven National Laboratory (BNL), will add polarized electrons to the list of colliding species in RHIC. A 10-30 GeV electron energy recovery linac (ERL) will require up to six passes around the RHIC 3.8 km circumference. We are developing and testing small (5 mm) gap dipole and quadrupole magnets and vacuum chambers for cost-effective eRHIC passes [4]. We are also studying the sensitivity of eRHIC pass optics to magnet and alignment errors in such a small magnet structure. We present the magnetic and mechanical designs of the small gap eRHIC components and prototyping test progress.

43 PARTICLE ACCELERATORS↗

Extraction of a Clean Charge-Density-Wave Gap for 2H-Na(X)TaS(2)

We develop a novel decomposition method to extract a clean charge-density-wave (CDW) gap of sodium doped 2H-TaS{sub 2} from its partially suppressed photoemission spectra in the CDW state. We find that about 1/3 of the spectrum is fully gapped, while the other 2/3 is ungapped. Our results are contrary to a recent theoretical proposal based on the band picture that divides the system into three decoupled sublattices, with two being distorted due to the CDW formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-Ray Standing Wave Analysis of Overlayer-Induced Substrate Relaxation: the Clean And Bi-Covered (110) GaP Surface

The relaxation of the surface P atoms, for both the clean and Bi-covered GaP(110) surface, was studied with x-ray standing wave (XSW) spectroscopy using surface-sensitive x-ray photoelectron as the XSW modulated signal. The photoemission signal of the outermost surface layer is mixed with the signal from the remaining near surface of the underlying substrate, so further analysis is required to calculate the geometry of the relaxation of the surface atoms. We present a general analysis method for extracting the geometry of the surface reconstruction that minimizes the propagation of the uncertainties associated with fitting XSW data. It takes advantage of the fact that the coherent distance may be more accurately determined than the coherent fraction in XSW data analysis. This method makes use of the electron attenuation length, and shows that the relaxation is only weakly dependent on the uncertainties of this parameter. Results indicate that, for the clean GaP surface, P relaxes with a small outward rotational displacement, with the axis of the rotation located at the second-layer Ga site, whereas, for the Bi-covered case, relaxation consists of a rotation in the opposite direction. The magnitude of the contraction is not negligible, and might be important in the interpretation of low-energy electron diffraction data and in ab initio calculations.

36 MATERIALS SCIENCE↗

Technology gap analysis on sodium-cooled reactor fuel handling system supporting advanced burner reactor development.

The goals of the Global Nuclear Energy Partnership (GNEP) are to expand the use of nuclear energy to meet increasing global energy demand in an environmentally sustainable manner, to address nuclear waste management issues without making separated plutonium, and to address nonproliferation concerns. The advanced burner reactor (ABR) is a fast reactor concept which supports the GNEP fuel cycle system. Since the integral fast reactor (IFR) and advanced liquid-metal reactor (ALMR) projects were terminated in 1994, there has been no major development on sodium-cooled fast reactors in the United States. Therefore, in support of the GNEP fast reactor program, the history of sodium-cooled reactor development was reviewed to support the initiation of this technology within the United States and to gain an understanding of the technology gaps that may still remain for sodium fast reactor technology. The fuel-handling system is a key element of any fast reactor design. The major functions of this system are to receive, test, store, and then load fresh fuel into the core; unload from the core; then clean, test, store, and ship spent fuel. Major requirements are that the system must be reliable and relatively easy to maintain. In addition, the system should be designed so that it does not adversely impact plant economics from the viewpoints of capital investment or plant operations. In this gap analysis, information on fuel-handling operating experiences in the following reactor plants was carefully reviewed: EBR-I, SRE, HNPF, Fermi, SEFOR, FFTF, CRBR, EBR-II, DFR, PFR, Rapsodie, Phenix, Superphenix, KNK, SNR-300, Joyo, and Monju. The results of this evaluation indicate that a standardized fuel-handling system for a commercial fast reactor is yet to be established. However, in the past sodium-cooled reactor plants, most major fuel-handling components-such as the rotatable plug, in-vessel fuel-handling machine, ex-vessel fuel transportation cask, ex-vessel sodium-cooled storage, and cleaning stations-have accumulated satisfactory construction and operation experiences. In addition, two special issues for future development are described in this report: large capacity interim storage and transuranic-bearing fuel handling.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Axial gap permanent-magnet machine with reluctance poles and PM element covers

An electric machine (10) has a disk-shaped rotor (24) disposed in an operating space between two opposing stator assemblies (11, 12) to provide two axial air gaps (15, 16). The rotor (24) has a hub (28) and an outer ring (26) of non-magnetic material and is further provided with a plurality of permanent magnetic elements (25) for coupling flux that is induced by the magnetic field of the stator assemblies (11, 12). The permanent magnetic elements (25) are spaced apart and reluctance poles (27) are positioned in spaces between the magnetic elements (25) to couple additional flux induced by the magnetic field of the stator assemblies (11, 12). Various constructions and shapes (40-45) for the PM magnetic elements (25) are disclosed, and including PM covers (60) of ferromagnetic material for enhancing q-axis flux in the air gaps (15, 16) and for reducing harmonics where toothed stators are used. Methods of providing increased torque using the the various rotor constructions are also disclosed.

42 ENGINEERING↗

Small gap magnet prototype measurements for eRHIC

In this paper we present the design and prototype measurement of small gap (5mm to 10 mm aperture) dipole and quadrupole for the future high energy ERL (Energy Recovery Linac). The small gap magnets have the potential of largely reducing the cost of the future electron-ion collider project, eRHIC, which requires a 10GeV to 30 GeV ERL with up to 6 energy recovery passes (3.8 km each pass). We also studied the sensitivity of the energy recovery pass and the alignment error in this small magnets structure and countermeasure methods.

43 PARTICLE ACCELERATORS↗

A simple generalization of the energy gap law for nonradiative processes

For more than 50 years, an elegant energy gap (EG) law developed by Englman and Jortner [Mol. Phys. 18, 145 (1970)] has served as a key theory to understand and model the nearly exponential dependence of nonradiative transition rates on the difference of energy between the initial and final states. This work revisits the theory, clarifies the key assumptions involved in the rate expression, and provides a generalization for the cases where the effects of temperature dependence and low-frequency modes cannot be ignored. For a specific example where the low-frequency vibrational and/or solvation responses can be modeled as an Ohmic spectral density, a simple generalization of the EG law is provided. Test calculations demonstrate that this generalized EG law brings significant improvement over the original EG law. Both the original and generalized EG laws are also compared with the stationary phase approximations developed for electron transfer theory, which suggests the possibility of a simple interpolation formula valid for any value of EG.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of the electronic charge gap on LO bond-stretching phonons in undoped La 2 CuO 4 calculated using LDA + U

Typical density-functional theory calculations that wrongly predict undoped cuprates to be metallic also predict Cu-O half- and full-breathing phonon energies that are significantly softer than observed, presumably because of weak on-site Coulomb repulsion on the Cu 3d orbitals. We used DFT+U calculations with antiferromagnetic supercells of La 2 CuO 4 to establish correlation between the on-site repulsion strength, tuned via adjusting the value of U, and phonon dispersions. Here, we find that breathing and half-breathing phonons reach experimental values when U is tuned to obtain the correct optical gap and magnetic moments. We demonstrate that using distorted supercells within DFT+U is a promising framework to model phonons in undoped cuprates and other perovskite oxides with complex, interrelated structural and electronic degrees of freedom.

36 MATERIALS SCIENCE↗

Multi Band Gap High Efficiency Converter (RAINBOW)

The RAINBOW multi band gap system represents a unique combination of solar cells, concentrators and beam splitters. RAINBOW is a flexible system which can readily expand as new high efficiency components are developed.

RAINBOW multi band gap system solar cells concentr↗

Photovoltaics Based on Direct and Indirect Gap Semiconductors

Direct and thin, or indirect and thick absorbers can yield cells close to 30% but there are practical limits due to defects, cost, reliability. Tandems and new ideas are needed to minimize thermalization and entropy losses and to enable high absorptance in thin Si layers. Direct-gap absorbers have ~1000x higher recombination losses than Si, but being 100x thinner, the limiting 1-sun efficiencies are similar due to 100x higher G.

direct-gap↗

B—N–Bond–Embedded Triplet Terpolymers with Small Singlet–Triplet Energy Gaps for Suppressing Non–Radiative Recombination and Improving Blend Morphology in Organic Solar Cells

Suppressing the photon energy loss (E loss ), especially the non-radiative loss, is of importance to further improve the device performance of organic solar cells (OSCs). However, typical π-conjugated semiconductors possess a large singlet–triplet energy gap (ΔE ST ), leading to a lower triplet state than charge transfer state and contributing to a non-radiative loss channel of the photocurrent by the triplet state. Herein, a series of triplet polymer donors are developed by introducing a BNIDT block into the PM6 polymer backbone. Further, the high electron affinity of BNIDT and the opposite resonance effect of the B—N bond in BNIDT results in a lowered highest occupied molecular orbital (HOMO) and a largely reduced ΔE ST . Moreover, the morphology of the active blends is also optimized by fine-tuning the BNIDT content. Therefore, non-radiative recombination via the terminal triplet loss channels and morphology traps is effectively suppressed. The PNB-3 (with 3% BNIDT):L8-BO device exhibits both small ΔE ST and optimized morphology, favoring more efficient charge transfer and transport. Finally, the simultaneously enhanced V oc of 0.907 V, J sc of 26.59 mA cm –2 , and FF of 78.86% contribute to a champion PCE of 19.02%. Therefore, introducing B—N bonds into benchmark polymers is a possible avenue toward higher-performance of OSCs.

36 MATERIALS SCIENCE↗

(CH 3 NH 3 ) AuX 4 ·H 2 O (X=Cl, Br) and (CH 3 NH 3 ) AuCl 4 : Low-Band Gap Lead-Free Layered Gold Halide Perovskite Materials

Perovskite solar cells have recently enabled power conversion efficiency comparable to established technologies such as silicon and cadmium telluride. Ongoing efforts to improve the stability of halide perovskites in ambient air has yielded promising results. However, the presence of toxic heavy element lead (Pb) remains a major concern requiring further attention. Herein, we report three new Pb-free hybrid organic–inorganic perovskite-type halides based on gold (Au), (CH 3 NH 3 )AuBr 4 ·H 2 O ( 1 ), (CH 3 NH 3 )AuCl 4 ·H 2 O ( 2 ), and (CH 3 NH 3 )AuCl 4 ( 3 ). Hydrated compounds 1 and 2 crystallize in a brand-new structure type featuring perovskite-derived 2D layers and 1D chains based on pseudo-octahedral AuX 6 building blocks. In contrast, the novel crystal structure of the solvent-free compound 3 shows an exotic non-perovskite quasi-2D layered structure containing edge- and corner-shared AuCl 6 octahedra. The use of Au metal instead of Pb results in unprecedented low band gaps below 2.5 eV for single-layered metal chlorides and bromides. Moreover, at room temperature the three compounds show a weak blue emission due to the electronic transition between Au-6s and Au-5d, in agreement with the density function theory (DFT) calculation results. These findings are discussed in the context of viability of Au-based halides as alternatives for Pb-based halides for optoelectronic applications.

13 HYDRO ENERGY↗

Decreased Energy Gap and Enhanced Conductivity in Zn-Doped Sr{sub 2}IrO{sub 4}

The 5d transition metal oxide Sr{sub 2}IrO{sub 4} has attracted much interest in the high-temperature superconductivity community since it highly resembles the cuprate superconductor in crystal and electronic structures. Here, we report on the transport and magnetic properties of Zn-doped Sr{sub 2}IrO{sub 4}. It is found that the energy gap of Sr{sub 2}IrO{sub 4} is rapidly decreased with a small amount of Zn doping. Consequently, the electrical conductivity is significantly enhanced. The present work could serve as the prerequisite stage in exploring the possible superconductivity of the Sr{sub 2}IrO{sub 4} compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bridging the Gap: Linking Simulation and Testing

The Materials Genome Initiative (MGI) which is a key enabler for the Advanced Manufacturing Partnership, announced in 2011 by U.S. President Barack Obama, was established to accelerate the development and deployment of advanced materials. The MGI is driven by the need to "bridge the gap" between (I) experimental results and computational analysis to enable the rapid development and validation of new mateirals, and (II) the processes required to convert these materials into useable goods.

bridge the gap↗

Phenomena, gaps, and issues for neutronics modeling and simulation of FHRs

On the path to deployment of any reactor, modeling tool verification and validation is a key step. Fluoride-Salt-Cooled High Temperature Reactors (FHR) pose challenges to neutronics modeling and simulation tools due to several design features of the reactor type. This paper presents a categorized list of phenomena that pose challenges to FHR modeling using current neutronics tools. These phenomena are presented in four categories: Fundamental Cross Section Data, Material Composition, Computational Methodology, and General Depletion. Here, a short path forward for these phenomena is also presented. In addition, a discussion of the resulting gaps in current codes is presented.

42 ENGINEERING↗

Flow field design for zero-gap microbial electrolysis cells using synthetic and real wastewater

Increasing performance in microbial electrolysis cells (MECs) requires the development of optimized reactor configurations with minimal internal resistance and capable to operate with real wastewater. Here, the impact of two different flow fields (serpentine and circular) was examined in zero-gap MECs with synthetic and real wastewaters. The serpentine flow field enabled a uniform distribution of the electrolyte in the anode chamber, resulting in larger current densities at lower flow rates compared to the circular flow field. Electrochemical tests using synthetic media with high buffer capacity revealed more stable and higher performance with the serpentine flow field compared to the circular flow path, producing larger current density (23.7 ± 0.8 A/m 2 vs 21.9 ± 5.6 A/m 2 ), hydrogen production rate (75.8 ± 4.1 L/L-d vs 54.3 ± 2.4 L/L-d), cathodic coulombic efficiency (>91 % vs >50 %), and an overall lower internal resistance (12.5 ± 0.5 mΩm 2 vs 14.8 ± 3.7 mΩm 2 ). Continuous operation for over 30 days with real wastewater indicated higher tolerance of the MECs with serpentine flow field toward media with large concentration of suspended solids, producing a current density of 5.4 ± 1.1 A/m 2 and a hydrogen production rate of 22.2 ± 6.2 L/L-d. Furthermore, the results presented here underscore the importance of reactor design and architecture in optimizing MEC performance for hydrogen production from liquid wastes.

flow path↗

Advanced nuclear reactor integration opportunities for the pulp and paper industry in the U.S. context: Technical perspectives, gap analysis, and preliminary technoeconomic assessment

Pulp and paper (P&P) manufacturing requires a large amount of low-pressure (LP) steam to digest, wash wood fibers and dry pulp into paper. Most of the LP steam is extracted from backpressure turbines that produce power from high-pressure (HP) steam. This HP steam is generated from burning wood waste material; bark is burned in hog boilers, and lignin is boiled in a black liquor recovery boiler. In a typical integrated P&P mill, 50–100% of the steam is produced from these sources, while additional steam is produced in natural gas (NG), fuel oil, or coal boilers. The other energy-intensive process in the plant is the chemical-recovery section (e.g., lime kiln), which requires high-temperature processing from NG combustion to retrieve and recirculate spent chemicals. This paper assesses the energy and heat demand and material balances of a typical generic kraft pulp mill, along with the nuclear heat, steam, and power integration opportunities to replace conventional combustion systems. The paper also addresses steam and electricity generation through a comprehensive technical and engineering gap analysis of five different nuclear-integration opportunities and their process economics, thus enabling the lignin and bark to be further processed into biobased chemicals or fuels, as well as the potential to reduce overall emissions from kraft pulping. Preliminary findings have shown that the P&P industry could achieve technological benefits by integrating their current manufacturing process with small modular nuclear reactors (SMNRs) on a national level. This research aims to set the path forward for a cleaner and more resilient P&P industry.

Advanced nuclear reactor↗