Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Function Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

β decay of Ba 141

The β-decay strength function of nuclides produced in fission is important as it dictates the distribution of decay energy between electrons, neutrinos, and γ rays and so is critical for calculating decay heat in reactors and for estimating the reactor antineutrino spectrum. Several experimental techniques are available to determine this strength function, including electron spectroscopy, γ-ray calorimetry (TAGS spectroscopy), and detailed, high-resolution spectroscopy with modern large high-purity germanium arrays. This work investigates the decay of the well-known and strongly produced fission fragment 141 Ba. A beam of 141 Cs was implanted at the target position of the Gammasphere and the subsequent decay of the daughter 141 Ba was studied. Extensive decay spectroscopy was possible up to the decay Q value of 3.197(7) MeV, including a significant extension of the level scheme and detailed angular correlation measurements for all levels with greater than 0.25% β feeding. The distribution of the β-decay strength was then inferred and compared to previous calorimetric studies. In conclusion, the agreement was excellent and provides a benchmark for comparing strength function methods and data for a more detailed understanding of the structure of 141 La.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Dynamic Modeling, Parameter Estimation, and Data Reconciliation of a Supercritical Pulverized Coal-Fired Boiler

A high-fidelity, spatially distributed dynamic model of a supercritical pulverized coal-fired boiler was developed for calculating transient thermal profiles of the boiler tubes, which are often not measured or unmeasurable in industrial settings due to the harsh operating conditions. In this work, rigorous models of the subcritical and supercritical steam properties, which can be highly nonlinear, were used to capture the transition between two-phase and one-phase flow, respectively, as supercritical boilers frequently transition through the critical point during load-following operation. The transient boiler model was also used for data reconciliation and parameter estimation for the purpose of model validation against industrial data. An approach was developed to reduce the size of large-scale reconciliation problem by focusing on the implementation of bias terms for the reconciled variables, which can be estimated in place of the reconciled variables themselves. In addition, a functional approximation of the reconciliation problem was defined so that it can be more simply optimized. Combining this functional approximation optimization with reformulation of the reconciliation problem considering measurement biases can significantly improve the tractability of many such large-scale problems. The validated boiler model was then used to study transient responses under load-following operation with specific attention on the calculation of unmeasurable variables.

42 ENGINEERING↗

THE LARGE-SCALE THREE-POINT CORRELATION FUNCTION OF SLOAN DIGITAL SKY SURVEY LUMINOUS RED GALAXIES

We present new measurements of the redshift-space three-point correlation function (3PCF) of Luminous Red Galaxies (LRGs) from the Sloan Digital Sky Survey (SDSS). Using the largest data set to date, the Data Release 7 LRGs, and an improved binning scheme compared to previous measurements, we measure the LRG 3PCF on large scales up to {approx}90 h{sup -1} Mpc, from the mildly nonlinear to quasi-linear regimes. Comparing the LRG correlations to the dark matter two- and three-point correlation functions, obtained from N-body simulations we infer linear and nonlinear bias parameters. As expected, LRGs are highly biased tracers of large-scale structure, with a linear bias b{sub 1} {approx} 2; the LRGs also have a large positive nonlinear bias parameter, in agreement with predictions of galaxy population models. The use of the 3PCF to estimate biasing helps to also make estimates of the cosmological parameter {sigma}{sub 8}, as well as to infer best-fit parameters of the halo occupation distribution parameters for LRGs. We also use a large suite of public mock catalogs to characterize the error covariance matrix for the 3PCF and compare the variance among simulation results with jackknife error estimates.

79 ASTRONOMY AND ASTROPHYSICS↗

MODELING ATMOSPHERIC EMISSION FOR CMB GROUND-BASED OBSERVATIONS

Atmosphere is one of the most important noise sources for ground-based cosmic microwave background (CMB) experiments. By increasing optical loading on the detectors, it amplifies their effective noise, while its fluctuations introduce spatial and temporal correlations between detected signals. We present a physically motivated 3D-model of the atmosphere total intensity emission in the millimeter and sub-millimeter wavelengths. We derive a new analytical estimate for the correlation between detectors time-ordered data as a function of the instrument and survey design, as well as several atmospheric parameters such as wind, relative humidity, temperature and turbulence characteristics. Using an original numerical computation, we examine the effect of each physical parameter on the correlations in the time series of a given experiment. We then use a parametric-likelihood approach to validate the modeling and estimate atmosphere parameters from the polarbear-i project first season data set. We derive a new 1.0% upper limit on the linear polarization fraction of atmospheric emission. We also compare our results to previous studies and weather station measurements. The proposed model can be used for realistic simulations of future ground-based CMB observations.

79 ASTRONOMY AND ASTROPHYSICS↗

CGC for ultra-peripheral Pb+Pb collisions at the Large Hadron Collider: a more realistic calculation

We provide the first calculation of two-gluon production at mid-rapidity in ultra-peripheral collisions in the Color Glass Condensate framework. To estimate systematic uncertainty associated with poor understanding of the wave function of the nearly real photon, we consider two diametrically different models: the dilute quark-antiquark dipole approximation and a vector meson, in which color charge density is approximated by McLerran-Venugopalan model. In the experimentally relevant range, the target nucleus can be faithfully approximated by a highly saturated state. This simplification enables us to perform efficient numerical simulations and extract the two-gluon correlation functions and the associated azimuthal harmonics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fast Decomposition of Three-Component Spectra of Fluorescence Quenching by White and Grey Methods of Data Modeling

‘White’ and ‘grey’ methods of data modeling have been employed to resolve the heterogeneous fluorescence from a fluorophore mixture of 9-cyanoanthracene (CNA), 10-chloro-9-cyanoanthracene (ClCNA) and 9,10-dicyanoanthracene (DCNA) into component individual fluorescence spectra. The three-component spectra of fluorescence quenching in methanol were recorded for increasing amounts of lithium bromide used as a quencher. The associated intensity decay profiles of differentially quenched fluorescence of single components were modeled on the basis of a linear Stern-Volmer plot. These profiles are necessary to initiate the fitting procedure in both ‘white’ and ‘grey’ modeling of the original data matrices. ‘White’ methods of data modeling, called also ‘hard’ methods, are based on chemical/physical laws expressed in terms of some well-known or generally accepted mathematical equations. The parameters of these models are not known and they are estimated by least squares curve fitting. ‘Grey’ approaches to data modeling, also known as hard-soft modeling techniques, make use of both hard-model and soft-model parts. In practice, the difference between ‘white’ and ‘grey’ methods lies in the way in which the ‘crude’ fluorescence intensity decays of the mixture components are estimated. In the former case they are given in a functional form while in the latter as digitized curves which, in general, can only be obtained by using dedicated techniques of factor analysis. In the paper, the initial values of the Stern-Volmer constants of pure components were evaluated by both ‘point-by-point’ and ‘matrix’ versions of the method making use of the concept of wavelength dependent intensity fractions as well as by the rank annihilation factor analysis applied to the data matrices of the difference fluorescence spectra constructed in two ways: from the spectra recorded for a few excitation lines at the same concentration of a fluorescence quencher or classically from a series of the spectra measured for one selected excitation line but for increasing concentration of the quencher. The results of multiple curve resolution obtained by all types of the applied methods have been scrutinized and compared. In addition, the effect of inadequacy of sample preparation and increasing instrumental noise on the shape of the resolved spectral profiles has been studied on several datasets mimicking the measured data matrices. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Reducing the small-heart effect in pediatric gated myocardial perfusion single-photon emission computed tomography

Background: We compared two reconstruction algorisms and two cardiac functional evaluation software programs in terms of their accuracy for estimating ejection fraction (EF) of small hearts (SH). Methods: The study group consisted of 66 pediatric patients. Data were reconstructed using a filtered back projection (FBP) method without the resolution correction (RC) and an iterative method based on an ordered subset expectation maximization (OSEM) algorithm with the RC. EF was evaluated using two software programs of quantitative gated single-photon emission computed tomography (SPECT) (QGS) and cardioREPO. We compared the EF of gated myocardial perfusion SPECT to echocardiographic measurement (Echo). Results: Forty-eight of 66 patients had an end-systolic volume < 20 mL which was used as the criterion for being included in the SH group, and the SH effect led to an overestimation of EF. While significant differences were observed between Echo (66.9 ± 5.0%) and QGS-FBP without RC (76.9 ± 8.4%, P < .0001), QGS-OSEM with RC (76.6 ± 8.6%, P < .0001), and cardioREPO-FBP without RC (72.1 ± 10.0%, P = .0011), no significant difference was observed between Echo and cardioREPO-OSEM with RC (67.4 ± 6.1%) in SH group. Conclusions: In pediatric gated myocardial perfusion SPECT, the SH effect can be significantly reduced when an OSEM algorithm is used with RC in combination with the specific cardioREPO algorithm.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Toward the understanding of hydration phenomena in aqueous electrolytes from the interplay of theory, molecular simulation, and experiment

We confront the microstructural analysis of aqueous electrolytes and present a detailed account of the fundamentals underlying the neutron scattering with isotopic substitution (NDIS) approach for the experimental determination of ion coordination numbers in systems involving both halides anions and oxyanions. We place particular emphasis on the frequently overlooked ion-pairing phenomenon, identify its microstructural signature in the neutron-weighted distribution functions, and suggest novel techniques to deal with either the estimation of the ion-pairing magnitude or the correction of its effects on the experimentally measured coordination numbers. We illustrate the underlying ideas by applying these new developments to the interpretation of four NDIS test-cases via molecular simulation, as convenient dry runs for the actual scattering experiments, for representative aqueous electrolyte solutions at ambient conditions involving metal halides and nitrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Risk Factors for Regional Nodal Relapse in Breast Cancer Patients With One to Three Positive Axillary Nodes

Purpose: In many centers, supraclavicular fossa radiotherapy (SCF RT) is not routinely offered to breast cancer patients with one to three positive lymph nodes. We aimed to identify a subgroup of these patients who are at high risk of supra or infraclavicular fossa relapse (SCFR) such that they can be offered SCFRT at the time of diagnosis to improve long term locoregional control. Methods and Materials: We performed a retrospective analysis of the pathological features of 1,065 cases of invasive breast cancer with one to three positive axillary lymph nodes. Patients underwent radical breast conserving surgery or mastectomy. A total of 45% of patients received adjuvant chest wall/breast RT. No patients received adjuvant SCFRT. The primary outcome was SCFR. Secondary outcomes were chest wall/breast recurrence, distant metastasis, all death, and breast-cancer specific death. Kaplan-Meier estimates were used to calculate actuarial event rates and survival functions compared using log-rank tests. Multivariate analyses (MVA) of factors associated with outcome were conducted using Cox proportional hazards models. Results: Median follow-up was 9.7 years. SCFR rate was 9.2%. Median time from primary diagnosis to SCFR was 3.4 years (range, 0.7-14.4 years). SCFR was associated with significantly lower 10-year survival (18% vs. 65%; p < 0.001). Higher grade and number of positive lymph nodes were the most significant predictors of SCFR on MVA (p < 0.001). 10 year SCFR rates were less than 1% in all patients with Grade 1 cancers compared with 30% in those having Grade 3 cancers with three positive lymph nodes. Additional factors associated with SCFR on univariate analysis but not on MVA included larger nodal deposits (p = 0.002) and proportion of positive nodes (p = 0.003). Conclusions: Breast cancer patients with one to three positive lymph nodes have a heterogenous risk of SCFR. Patients with two to three positive axillary nodes and/or high-grade disease may warrant consideration of SCFRT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Incorporating Single-nucleotide Polymorphisms Into the Lyman Model to Improve Prediction of Radiation Pneumonitis

Purpose: To determine whether single-nucleotide polymorphisms (SNPs) in genes associated with DNA repair, cell cycle, transforming growth factor-{beta}, tumor necrosis factor and receptor, folic acid metabolism, and angiogenesis can significantly improve the fit of the Lyman-Kutcher-Burman (LKB) normal-tissue complication probability (NTCP) model of radiation pneumonitis (RP) risk among patients with non-small cell lung cancer (NSCLC). Methods and Materials: Sixteen SNPs from 10 different genes (XRCC1, XRCC3, APEX1, MDM2, TGF{beta}, TNF{alpha}, TNFR, MTHFR, MTRR, and VEGF) were genotyped in 141 NSCLC patients treated with definitive radiation therapy, with or without chemotherapy. The LKB model was used to estimate the risk of severe (grade {>=}3) RP as a function of mean lung dose (MLD), with SNPs and patient smoking status incorporated into the model as dose-modifying factors. Multivariate analyses were performed by adding significant factors to the MLD model in a forward stepwise procedure, with significance assessed using the likelihood-ratio test. Bootstrap analyses were used to assess the reproducibility of results under variations in the data. Results: Five SNPs were selected for inclusion in the multivariate NTCP model based on MLD alone. SNPs associated with an increased risk of severe RP were in genes for TGF{beta}, VEGF, TNF{alpha}, XRCC1 and APEX1. With smoking status included in the multivariate model, the SNPs significantly associated with increased risk of RP were in genes for TGF{beta}, VEGF, and XRCC3. Bootstrap analyses selected a median of 4 SNPs per model fit, with the 6 genes listed above selected most often. Conclusions: This study provides evidence that SNPs can significantly improve the predictive ability of the Lyman MLD model. With a small number of SNPs, it was possible to distinguish cohorts with >50% risk vs <10% risk of RP when they were exposed to high MLDs.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Concomitant Imaging Dose and Cancer Risk in Image Guided Thoracic Radiation Therapy

Purpose: Kilovoltage cone beam computed tomography (CT) (kVCBCT) imaging guidance improves the accuracy of radiation therapy but imposes an extra radiation dose to cancer patients. This study aimed to investigate concomitant imaging dose and associated cancer risk in image guided thoracic radiation therapy. Methods and Materials: The planning CT images and structure sets of 72 patients were converted to CT phantoms whose chest circumferences (C{sub chest}) were calculated retrospectively. A low-dose thorax protocol on a Varian kVCBCT scanner was simulated by a validated Monte Carlo code. Computed doses to organs and cardiac substructures (for 5 selected patients of various dimensions) were regressed as empirical functions of C{sub chest}, and associated cancer risk was calculated using the published models. The exposures to nonthoracic organs in children were also investigated. Results: The structural mean doses decreased monotonically with increasing C{sub chest}. For all 72 patients, the median doses to the heart, spinal cord, breasts, lungs, and involved chest were 1.68, 1.33, 1.64, 1.62, and 1.58 cGy/scan, respectively. Nonthoracic organs in children received 0.6 to 2.8 cGy/scan if they were directly irradiated. The mean doses to the descending aorta (1.43 ± 0.68 cGy), left atrium (1.55 ± 0.75 cGy), left ventricle (1.68 ± 0.81 cGy), and right ventricle (1.85 ± 0.84 cGy) were significantly different (P<.05) from the heart mean dose (1.73 ± 0.82 cGy). The blade shielding alleviated the exposure to nonthoracic organs in children by an order of magnitude. Conclusions: As functions of patient size, a series of models for personalized estimation of kVCBCT doses to thoracic organs and cardiac substructures have been proposed. Pediatric patients received much higher doses than did the adults, and some nonthoracic organs could be irradiated unexpectedly by the default scanning protocol. Increased cancer risks and disease adverse events in the thorax were strongly related to higher imaging doses and smaller chest dimensions.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Study on impact of Cr and Mo on diffusion of H in 2.25Cr1Mo steel using first-principle calculations

Chrome-molybdenum steel (2.25Cr1Mo steel) is one of the main materials of a steam generator (SG) in high-temperature reactor-pebblebed modules (HTR-PM). It is essential to analyze the source term of tritium in this material, because the behavior of tritium in a SG is important for performing source term analysis in normal and accident conditions. In this article, the diffusion behavior of H atom in 2.25Cr1Mo steel was calculated to estimate the diffusivity of tritium using first-principles density functional theory. To develop and simplify the model of hydrogen diffusion in 2.25Cr1Mo steel, the impact of Cr and Mo on the diffusion of hydrogen in bcc-Fe were first calculated, all the possible diffusion paths were considered, and the minimum energy path was obtained. The diffusion activation energy and pre-exponential factor of the diffusion coefficient were obtained from Vienna Ab initio Simulation Package combined with the climbing image-nudged elastic band method. Here the results indicate that the minimum energy path for the impurity H atom is from one tetrahedral interstitial site to an adjacent tetrahedral interstitial site. The function of the diffusion coefficient of H in 2.25Cr1Mo steel with temperature T can be expressed as D = 1.486 X 10 -7 x ($\frac{-16.350kJ/mol}{RT}$) (M2/s). The diffusion coefficient of our calculation and some of the previous experiments have an excellent quantitative agreement, which indicates the reliability of our crystalline model and the practicability of the present theoretical approach. More importantly, the computational results in this work can be treated as a good screening method to collect reasonable experimental data, which will provide a good reference for tritium source term evaluation in the SG of the HTR-PM.

36 MATERIALS SCIENCE↗

Fundamental flow characterization for LiCl–KCl molten salt natural circulation closed loop

Molten salt flow characterization presents numerous challenges due to the hostile environments that cause corrosion and erosion of instrumentation and structural components. To support future molten salt flow characterization under natural convection conditions, a LiCl–KCl eutectic molten salt loop was designed and constructed. The primary objective of this loop is to facilitate natural convection as the principal cooling mechanism, enabling insights into the physics behind natural convection in closed loops and serving as a baseline for loop dimensional and non-dimensional analyses. Here, this study summarizes the fundamental functions employed for flow characterization and introduces a model to estimate flow rate when intrusive instrumentation is unavailable. The approach relies solely on structural surface measurements to avoid flow disturbances. Furthermore, a comprehensive thermal–hydraulic analysis is included to deepen understanding of the system’s behavior.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Comparing the performance of density functionals in describing the adsorption of atoms and small molecules on Ni(111)

Reaction networks calculated using density functional theory (DFT) play a crucial role in understanding and predicting heterogeneous catalyst performance. However, results obtained using different density functionals can vary significantly. Accordingly, it is important to assess the accuracy of available functionals in capturing adsorption energetics derived from single-crystal adsorption microcalorimetry experiments. Here, we evaluate how different density functionals describe the molecular and dissociative adsorption of CH 3 I, the adsorption of CH 3 , I, and H, and the dissociative adsorption of CH 4 on Ni(111). First, we identify energetically-preferred adsorbed states for each adsorbate at three surface coverages and calculate the corresponding enthalpies of adsorption at 160 K. Then, we compare the results to experimental measurements published in the literature. For each adsorption process we find at least one functional that is quantitatively accurate within experimental error, but no functional is accurate (within experimental error) for all adsorption processes studied. Even when assuming an additional DFT error of ±20 kJ/mol on top of the experimental error, only the PBE-D3 and RPBE-D3 functionals are accurate for all considered adsorption systems. Overall, these results indicate that quantitative agreement between density functional theory calculations and experimental measurements is both system- and functional-dependent. Importantly, single-crystal adsorption microcalorimetry experiments will continue to play an important role for benchmarking density functionals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Attractive Way to Correct for Missing Singles Excitations in Unitary Coupled Cluster Doubles Theory

Coupled cluster methods based exclusively on double excitations are comparatively “cheap” and interesting model chemistries, as they are typically able to capture the bulk of the dynamic electron correlation effects. The trade-off in such approximations is that the effect of neglected excitations, particularly single excitations, can be considerable. Using standard and electron-pair-restricted T 2 operators to define two flavors of unitary coupled cluster doubles (UCCD) methods, we investigate the extent to which missing single excitations can be recovered from low-order corrections in many-body perturbation theory (MBPT) within the unitary coupled cluster (UCC) formalism. Here, our analysis includes the derivations of finite-order UCC energy functionals, which are used as a basis to define perturbative estimates of missed single excitations. This leads to the novel UCCD[4S] and UCCD[6S] methods, which consider energy corrections for missing single excitations through fourth- and sixth-order in MBPT, respectively. We also apply the same methodology to the electron-pair-restricted ansatz, but the improvements are only marginal. Our findings show that augmenting UCCD with these post hoc perturbative corrections can lead to UCCSD-quality results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Femtosecond X-ray Spectroscopy Directly Quantifies Transient Excited-State Mixed Valency

Quantifying charge delocalization associated with short-lived photoexcited states of molecular complexes in solution remains experimentally challenging, requiring local element specific femtosecond experimental probes of time-evolving electron transfer. In this study, we quantify the evolving valence hole charge distribution in the photoexcited charge transfer state of a prototypical mixed valence bimetallic iron–ruthenium complex, [(CN) 5 Fe II CNRu III (NH 3 ) 5 ]-, in water by combining femtosecond X-ray spectroscopy measurements with time-dependent density functional theory calculations of the excited-state dynamics. We estimate the valence hole charge that accumulated at the Fe atom to be 0.6 ± 0.2, resulting from excited-state metal-to-metal charge transfer, on an ~ 60 fs time scale. Our combined experimental and computational approach provides a spectroscopic ruler for quantifying excited-state valency in solvated complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron localization of anions probed by nitrile vibrations

Localization and delocalization of electrons is a key concept in chemistry, and is one of the important factors determining the efficiency of electron transport through organic conjugated molecules, which have potential to act as “molecular wires”. This, in turn, substantially influences the efficiencies of organic solar cells and other molecular electronic devices. It is also necessary to understand the electronic energy landscape and the dynamics of electrons through molecular chain that govern their transport capabilities in one-dimensional conjugated chains so that we can better define the design principles of conjugated molecules for their applications. We show that nitrile ν(C≡N) vibrations respond to the degree of electron localization in nitrile-substituted organic anions by utilizing time-resolved infrared (TRIR) detection combined with pulse radiolysis. Measurements of a series of aryl nitrile anions allow us to construct a semi-empirical calibration curve between the changes in the ν(C≡N) IR shifts and the changes in the electronic charges from the neutral to the anion states in the nitriles; more electron localization in the nitrile anion results in larger IR shifts. Furthermore, the IR linewidth in anions can report a structural change accompanying changes in the electronic density distribution. Probing the shift of the nitrile ν(C≡N) IR vibrational bands enables us to determine how the electron is localized in anions of nitrile-functionalized oligofluorenes, considered as organic mixed-valence compounds. We estimate the diabatic electron transfer distance, electronic coupling strengths, and energy barriers in these organic mixed-valence compounds. The analysis reveals a dynamic picture, showing that the electron is moving back and forth within the oligomers with a small activation energy of ≤ k B T, likely controlled by the movement of dihedral angles between monomer units. Thus, implications for the electron transport capability in "molecular wires" are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗