Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRONICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Interface Conductance Under a Real Electronics Box

Electronics Boxes with high heat dissipations use a thermal interface material to increase heat transfer to the radiator in a vacuum/space environment. There are lots of materials to choose from, but for Spacecraft applications, there are more than high heat transfer metrics which must be met. Contamination (both particle generation and outgassing), ease of cutting, and removal are just as important metrics in material selection. However, vendor data of material thermal conductance is usually based on a 1" X 1" piece of material under high uniform pressures. Large Electronics boxes almost never have optimal pressures, as they are bolted along the perimeter and leave gaps in the center regions. In order to characterize the relative thermal conductance for large Electronics boxes, an 8" X 8" plate was fabricated to simulate an electronics box bottom and bolted around the perimeter to a cold plate. Various thermal interface materials were inserted between the box and cold plate, and overall thermal conductance's were calculated. A table was generated which compares the full gamut of thermal interface materials for large boxes, from a dry joint to a wet joint. Materials were placed in order of high to low conductance's, so an engineer can compare the benefit of each material in a real-world scenario.

Thermal Interface Conductance↗

MMS Measurements of the Vlasov Equation: Probing the Electron Pressure Divergence Within Thin Current Sheets

We investigate the kinetic structure of electron-scale current sheets found in the vicinity of the magnetopause and embedded in the magnetosheath within the reconnection exhaust. A new technique for computing terms of the Vlasov equation using Magnetospheric Multiscale (MMS) measurements is presented and applied to study phase space density gradients and the kinetic origins of the electron pressure divergence found within these current sheets. Crescent-shaped structures in ∇(⟂2)f(e) give rise to bipolar and quadrupolar signatures in v · ∇f(e) measured near the maximum ∇ · P(e) inside the current layers. The current density perpendicular to the magnetic field is strong (J⟂ ∼2 μA/sq.m), and the thickness of the current layers ranges from 3 to 5 electron inertial lengths. The electron flows supporting the current layers mainly result from the combination of E × B and diamagnetic drifts. We find nonzero J · E′ within the current sheets even though they are observed apart from typical diffusion region signatures.

Shuster, J. R.↗

Advanced Modular Power System Fully Populated Electronics Enclosure Thermal Testing

A thermal test of an enclosure housing the AMPS electronics cards was performed. The enclosure was fully populated with 17 nonfunctioning AMPS electronics cards. Heaters were applied to the cards to simulate their operation. A cold plate was installed on the top of the case. The case was then insulated to simulate its installation within an electronics rack with the face and rear of the enclosure left open. The cold plate was connected to a chiller which provided cooling water at a fixed input temperature to the cold plate. Flow rates from the chiller of 0.0 L/min, 1.4 L/min and 1.8 L/min were tested. The test was operated at each flow rate over a range of heater power levels until the steady state temperature of the electronics cards was reached. Heater power levels from 2.5 W/card to 45 W/card were tested. The data collected was used to determine the steady state operating temperature of the cards, the temperature distribution between the cards, the time to reach steady-state temperature, the change in steady state temperature with change in heater power, the temperature distribution between the cards at the steady state condition and the heat lost to the surrounds by the enclosure. One of the main goals of the testing was to determine how much waste heat the cards could generate and still maintain a touch temperature at or below 40°C. Based on this requirement, for the 3 cooling rates tested, the maximum card waste heat that could be generated by each individual card was 3.9 W, 16.3 W and 17.6 W respectively. An analysis was also set up to provide an analytical model to estimate the card temperature under different cold plate flow rates and card heater power levels. The results off the analysis was compared to that of the experiment of the range of flow rates and power levels tested.

Anthony Colozza↗

Surface Temperature and the Compositional Effects of Electron Bombardment on Dione

Saturn’s icy moons are composed of mostly water ice with minor “contaminants,” such as CO2 ice, and a dark component thought to be organics, hematite and/or metallic Fe [1]. The space weathering process of electron bombardment is expected to be particularly important on the surfaces of Saturn’s inner moons (Mimas, Tethys, Dione, and Rhea), as they orbit within the extended plasma sheet of Saturn’s magnetosphere. Terrains exhibiting thermal anomalies (i.e., colder temperatures in the day and warmer temperatures at night than surrounding areas) correspond to regions of high energy electron bombardment [2; 3]. Energetic electrons impact the surfaces, fracturing ice particles into sub-micron sized grains, and this process becomes more effective for increasing particle energies [4]. In addition to alteration of ices, the dark material may also be modified or generated within icy surfaces by interaction with solar UV radiation, cosmic rays, or by particles trapped in Saturn’s magnetic field [5]. CO2 could be sourced from irradiation of dark organic material [7]. Many of these alterations should be observable in Visible and Infrared Mapping Spectrometer (VIMS) spectra [8]. We used surface temperatures derived from Cassini’s Composite Infrared Spectrometer (CIRS) to help isolate areas where space weathering due to electron bombardment is more predominant and investigated the subtle changes in VIMS spectra using machine learning techniques. We present our results here for Dione. On ocean worlds, space weathering products would be present along with any potential indications of life. We will need to understand the manifestation of space weathering in the data to separate the two processes.

Cindy Lee Young↗

Electron Bombardment on Dione: Surface Compositional Effects and Temperature Anomalies

Saturn’s icy moons are composed primarily of water ice with minor other “contaminants,” such as CO2 ice, and a dark component thought to be organics, hematite and/or metallic Fe [1]. The space weathering process of electron bombardment is expected to be particularly important on the surfaces of Saturn’s inner moons (Mimas, Tethys, Dione, and Rhea), as they orbit within Saturn’s inner magnetosphere. Terrains exhibiting thermal anomalies (i.e., colder temperatures in the day and warmer temperatures at night than surrounding areas) correspond to regions of high energy electron bombardment [2; 3; 4; 5]. Energetic electrons impact the surfaces, sintering ice grains together, and this process becomes more effective for increasing particle energies [6]. Solar UV radiation, cosmic rays, dust in-fall, and cold plasma particles trapped in Saturn’s magnetic field also play an important role in altering the nature and the structure of the native surface ices by the implantation of contaminants, ionization, sputtering, and dissociation of water ice molecules [7]. Additionally, CO2 could be sourced from irradiation of dark organic material [8]. Many of these surface alterations are observable in Cassini’s Visible and Infrared Mapping Spectrometer (VIMS) spectra [9]. We used similar methodologies as have been employed in previous works [e.g., 10] to derive surface temperatures from Cassini’s Composite Infrared Spectrometer (CIRS), which helped to isolate areas where space weathering due to electron bombardment is more predominant. The subtle changes in VIMS spectra were investigated using machine learning techniques. We present here our results for Dione.

Cindy Lee Young↗

Electron Bombardment on Dione: Surface Compositional Effects and Temperature Anomalies

Saturn’s icy moons are composed primarily of water ice with minor other “contaminants,” such as CO2 ice, and a dark component thought to be organics, hematite and/or metallic Fe. The space weathering process of electron bombardment is expected to be particularly important on the surfaces of Saturn’s inner moons (Mimas, Tethys, Dione, and Rhea), as they orbit within Saturn’s inner magnetosphere. Terrains exhibiting thermal anomalies (i.e., colder temperatures in the day and warmer temperatures at night than surrounding areas) correspond to regions of high energy electron bombardment. Energetic electrons impact the surfaces, sintering ice grains together, and this process becomes more effective for increasing particle energies. Solar UV radiation, cosmic rays, dust in-fall, and cold plasma particles trapped in Saturn’s magnetic field also play an important role in altering the nature and the structure of the native surface ices by the implantation of contaminants, ionization, sputtering, and dissociation of water ice molecules. Additionally, CO2 could be sourced from irradiation of dark organic material. Many of these surface alterations are observable in Cassini’s Visible and Infrared Mapping Spectrometer (VIMS) spectra. We used similar methodologies as have been employed in previous works to derive surface temperatures from Cassini’s Composite Infrared Spectrometer (CIRS), which helped to isolate areas where space weathering due to electron bombardment is more predominant. The subtle changes in VIMS spectra were investigated using machine learning techniques. We present here our results for Dione.

C L Young↗

Electron Bombardment on Dione: Surface Compositional Effects and Temperature Abnormalities

Saturn’s icy moons are composed primarily of water ice with minor other “contaminants,” such as CO2 ice, and a dark component thought to be organics, hematite and/or metallic Fe [1]. The space weathering process of electron bombardment is expected to be particularly important on the surfaces of Saturn’s inner moons (Mimas, Tethys, Dione, and Rhea), as they orbit within Saturn’s inner magnetosphere. Terrains exhibiting thermal anomalies (i.e., colder temperatures in the day and warmer temperatures at night than surrounding areas) correspond to regions of high energy electron bombardment [2; 3; 4; 5]. Energetic electrons impact the surfaces, sintering ice grains together, and this process becomes more effective for increasing particle energies [6]. Solar UV radiation, cosmic rays, dust in-fall, and cold plasma particles trapped in Saturn’s magnetic field also play an important role in altering the nature and the structure of the native surface ices by the implantation of contaminants, ionization, sputtering, and dissociation of water ice molecules [7]. Additionally, CO2 could be sourced from irradiation of dark organic material [8]. Many of these surface alterations are observable in Cassini’s Visible and Infrared Mapping Spectrometer (VIMS) spectra [9]. We used similar methodologies as have been employed in previous works [e.g., 10] to derive surface temperatures from Cassini’s Composite Infrared Spectrometer (CIRS), which helped to isolate areas where space weathering due to electron bombardment is more predominant. The subtle changes in VIMS spectra were investigated using machine learning techniques. We present here our results for Dione. [1] Clark, R. N., et al. (2012) Icarus, 218, 831–860 [2] Howett, C. J. A., et al. (2020) Icarus, 113745 [3] Nordheim, T. A., et al. (2017) Icarus, 286, 56-68 [4] Paranicas, C., et al. (2012) Planetary and Space Science, 61, 60–65 [5] Paranicas, C., et al. (2014) Icarus, 234, 155–161 [6] Schaible, M. J., et al. (2016) Icarus, 0, 1–13 [7] Baragiola, R. A., et al., (2013) Astrophysics and Space Science Library, vol. 356. Springer [8] Mennella, V., et al. (2006) The Astrophysical Journal, 643(2), 923 [9] Scipioni, F., et al. (2017) Icarus, 290, 183-200 [10] Howett, C. J. A., et al. (2014) Icarus, 241, 239-247

C L Young↗

Application of a First-Principles Anomalous Transport Model for Electrons to Multiple Hall Thrusters and Operating Conditions

We have developed a physics-based model based on a pseudo-particle description of the electron cyclotron drift instability. A key improvement of the model with respect to previous work is that linear theory is not applied in the event of wave saturation and deviations of electrons or ions from a Maxwellian distribution function. In the acceleration region, the anomalous collision frequency is computed as the minimum value necessary to prevent the electron drift velocity from exceeding the thermal velocity. A functional based on the electron equilibration time is defined to control the transition from high to low resistivity regions. The model was previously applied to a single Hall thruster at its nominal operating condition, showing promising results that captured accurately the location of the thruster’s acceleration region. In this paper, we extend the use of this firstprinciples models to two additional thrusters, also considering multiple operating conditions for each of them. Numerical results are compared to experimental measurements obtained with non-invasive laser induced fluorescence. In general, the agreement between experiments and simulations is good. The model is able to predict the location of the acceleration region for all cases. We observe however that fine details, such as changes in the plasma potential gradient within the acceleration regions, are not captured. The model is also insensitive to changes in the magnetic field strength while experiments show that small shifts in location (of less than 5% of the acceleration channel length) occur. We plan to address the weaknesses of our method with the help of physical insight gained from kinetic simulations of the acceleration region.

Chaplin, Vernon H.↗

The CALorimetric Electron Telescope (CALET) on the International Space Station: Results from the First Two Years On Orbit

The CALorimetric Electron Telescope (CALET) is a high-energy astroparticle physics space experiment installed on the International Space Station (ISS), developed and operated by Japan in collaboration with Italy and the United States. The CALET mission goals include the investigation of possible nearby sources of high-energy electrons, of the details of galactic particle acceleration and propagation, and of potential signatures of dark matter. CALET measures the cosmic-ray electron+positron flux up to 20 TeV, gamma-rays up to 10 TeV, and nuclei with Z=1 to 40 up to 1,000 TeV for the more abundant elements during a long-term observation aboard the ISS. Starting science operation in mid-October 2015, CALET performed continuous observation without major interruption with close to 20 million triggered events over 10 GeV per month. Based on the data taken during the rst two-years, we present an overview of CALET observations: 1) Electron+positron energy spectrum, 2) Nuclei analysis, 3) Gamma-ray observation including a characterization of on-orbit performance. Results of the electromagnetic counterpart search for LIGO/Virgo gravitational wave events are discussed as well.

Y Asaoka↗

Day-to-Day Variability of Ionosphere Electron Density During Solar Minimum Derived From FORMOSAT-7/COSMIC-2 Measurements

This study examines the day-to-day variability of low-latitude ionosphere using global ionospheric specification (GIS) electron density profiles derived from FORMOSAT-7/COSMIC-2 radio occultation measurements during a deep solar minimum period of August 2019 to July 2020. The measurements reveal significant daily variations over dayside low latitudes, yielding about 10-20% standard deviation in equinoxes, 20-30% in solstices, reaching 40-50% in winter. The nighttime deviations could be 30-60%, being largest in solstices. Day-to-day variations are also observed in the longitudinal wave-4 structures. The period mostly remained geomagnetically quiet except for some moderate disturbances on a few days. Tidal decomposition of the GIS electron density shows that in-situ forced migrating diurnal (DW1) terdiurnal (TW3) oscillations and the background zonal mean yield only ~25% of the daily variations despite accounting for almost 75-90% of the observed electron density. Thus, forcing from lower atmosphere dominates the contribution (~75%) to the observed daily variations. Only about one third of this lower atmospheric forcing comes from the migrating semidiurnal SW2 and the usually investigated non-migrating diurnal eastward DE2, DE3, stationary planetary wave SPW3, SPW4, and semidiurnal eastward SE1, and SE2 components. The residual tides other than those mentioned above, including secondary waves through non-linear interactions and other planetary waves, thus significantly influence the day-to-day variations in electron density and modify the longitudinal wave structures.

day-to-day variability↗

Charge-Sign Dependent Cosmic-Ray Modulation Observed with the Calorimetric Electron Telescope on the International Space Station

We present the observation of a charge-sign dependent solar modulation of galactic cosmic rays (GCRs) with the Calorimetric Electron Telescope onboard the International Space Station over 6 yr, corresponding to the positive polarity of the solar magnetic field. The observed variation of proton count rate is consistent with the neutron monitor count rate, validating our methods for determining the proton count rate. It is observed by the Calorimetric Electron Telescope that both GCR electron and proton count rates at the same average rigidity vary in anticorrelation with the tilt angle of the heliospheric current sheet, while the amplitude of the variation is significantly larger in the electron count rate than in the proton count rate. We show that this observed charge-sign dependence is reproduced by a numerical “drift model” of the GCR transport in the heliosphere. This is a clear signature of the drift effect on the long-term solar modulation observed with a single detector.

O. Adriani↗

On the Onset Delays of Solar Energetic Electrons and Protons: Evidence for a Common Accelerator

The processes responsible for the acceleration of solar energetic particles (SEPs) are still not well understood, including whether SEP electrons and protons are accelerated by common or separate processes. Using a numerical particle transport model that includes both pitch-angle and perpendicular spatial diffusion, we simulate, among other quantities, the onset delay for MeV electrons and protons and compare the results to observations of SEPs from widely separated spacecraft. Such observations have previously been interpreted, in a simple scenario assuming no perpendicular diffusion, as evidence for different electron and proton sources. We show that, by assuming a common particle source together with perpendicular diffusion, we are able to simultaneously reproduce the onset delays for both electrons and protons. We argue that this points toward a common accelerator for these particles. Moreover, a relatively broad particle source is required in the model to correctly describe the observations. This is suggestive of diffusive shock acceleration occurring at large shock structures playing a significant role in the acceleration of these SEPs.

R D Strauss↗

Diffuse Auroral Intensities Produced By Whistler Mode and Electron Cyclotron Harmonic Waves

Whistler mode waves and ECH waves as observed by the THEMIS-D and THEMIS-E satellites have been analyzed. It is observed that ECH waves are very weak for pitch-angle diffusion whereas whistler mode waves are more efficient. Bounce-averaged pitch-angle diffusion rates at the edge of atmospheric loss-cone have been calculated for both waves. Further, these are used to obtain electron precipitation flux inside the loss-cone. The electron flux at the edge of the loss-cone is represented by the kappa distribution. Numerical calculation of precipitation flux is performed by varying the fitting parameters (which determine the shape of electron precipitation flux) appearing in the kappa distribution. Precipitation flux is used to obtain volume excitation rates and height-integrated volume excitation rates for the seven excitation states. Calculations have been performed using two standard atmosphere models corresponding to mean and high solar and geomagnetic activities. It has been observed from studies that the excitation rates produced by the ECH wave are several orders of magnitude smaller than the rates produced by whistler mode waves. We show that the scattering efficiency of whistler Mode is higher than that of ECH waves. The oblique whistler mode waves allow efficient scattering of electrons in diffuse aurora. Outcomes are discussed.

Arvind K. Tripathi↗

Simulating Electron Distribution Function in the Pulsating Aurora Using Particle and Wave Data of ARASE Satellite

Decades lasting research on the pulsating aurora suggested that this phenomenon forms as result of interactions between the magnetospheric keVs electrons and whistler-mode chorus waves. Arase satellite observation reported the direct evidence for this process confirming in situ measurement of highly correlated precipitated electrons and chorus wave activity. This paper presents the theoretical analysis of this observational event based on the SuperThermal Electron Transport (STET) code that simulates the highly dynamic environment of measured waves and particle data. Specifically, the STET code simulated results confirms the delicate loss-cone observation results of this mission and further reveals the broader energy range of precipitated electron fluxes that was not measurable by Arase satellite.

George V Khazanov↗

Quantifying the Agyrotropy of Proton and Electron Heating in Turbulent Plasmas

An important aspect of energy dissipation in weakly collisional plasmas is that of energy partitioning between different species (e.g., protons and electrons) and between different energy channels. Here we analyse pressure–strain interaction to quantify the fractions of isotropic compressive, gyrotropic, and nongyrotropic heating for each species. An analysis of kinetic turbulence simulations is compared and contrasted with corresponding observational results from Magnetospheric Multiscale Mission data in the magnetosheath. In assessing how protons and electrons respond to different ingredients of the pressure–strain interaction, we find that compressive heating is stronger than incompressive heating in the magnetosheath for both electrons and protons, while incompressive heating is stronger in kinetic plasma turbulence simulations. Concerning incompressive heating, the gyrotropic contribution for electrons is dominant over the nongyrotropic contribution, while for protons nongyrotropic heating is enhanced in both simulations and observations. Variations with plasma β are also discussed, and protons tend to gain more heating with increasing β.

Yan Yang↗

On the Spatial and Temporal Evolution of EMIC Wave-Driven Relativistic Electron Precipitation: Magnetically Conjugate Observations From the Van Allen Probes and CALET

Electromagnetic ion cyclotron (EMIC) waves have been shown to be able to drive strong electron precipitation, particularly at MeV energies. However, the spatio-temporal evolution of both the waves and the resulting precipitation is still not well understood. Here we investigate the evolution of relativistic electron precipitation driven by EMIC waves through combined observations from the Van Allen Probes and the CALorimetric Electron Telescope experiment onboard the International Space Station. Two case studies are examined where EMIC waves near the magnetic equator and precipitation at low altitude were detected in close magnetic conjunction, both of which were confined to narrow radial regions but persisted multiple hours. These observations, combined with quasilinear calculations, confirm that long-lived EMIC waves can drive hours-long MeV electron precipitation loss. However, the magnitude of the precipitation varied significantly during one of the events, as resonance conditions, particularly plasma density, evolved.

L. W. Blum↗

The Ionospheric Three-Dimensional Electron Density Variations Induced by the 21 August 2017 Total Solar Eclipse by Using Global Ionospheric Specification

Global Ionospheric Specification (GIS) is based on the Gauss–Markov Kalman filter to assimilate the slant total electron content (TEC) observed from ground-based GPS receivers and space-based radio occultation instrumentations in order to reconstruct three-dimensional (3D) ionospheric electron density structure, and it can remotely sense and monitor the weather condition in space. In this study, five minutes of high temporal resolution GIS is implemented in order to reconstruct the 3D electron density structure on the 21 August 2017 total solar eclipse and analyze the variations induced by the moon’s shadow. To obtain more information of the ionosphere, from the extend 2200 GPS stations on the continental United States, are added for assimilation. The results show the ionosphere peak height (hmF2) uplift was 30–50 km altitude in latitude 25–40°N, and that the electron density depletion at higher altitudes (400 km) has a more noticeable time delay than at low altitudes (200 km), especially in low-latitude regions.

Ionosphere↗

On-Demand Manufacturing of Electronics

The On-Demand Manufacturing of Electronics (ODME) project develops materials, processes, and device designs to enable electronics, sensors, and semiconductors to be produced in microgravity environments. The demonstration of these technologies provides a pathway for space-based manufacturing of circuits, wearables, energy storage devices, and other electronics. This has facilitated the terrestrial production of devices including a wide range of sensors, printed batteries, and circuits that are additively manufactured using techniques available on the Advanced Toolplate System (ATS). Recent parabolic flight campaigns conducted with the ATS suggest that direct ink write (DIW) technology is suitable for depositing functional material inks in reduced gravity environments. The development of the Advanced Toolplate system also includes several other new tools, including miniaturized versions of the direct write head, fused filament fabrication head, micro-mill, component pick & place head, and two newly developed deposition technologies, the Electrohydrodynamic (EHD) inkjet head (for semiconductors), and the Electrodeposition head (for high performance circuits). These experiments are designed to compare processing and material behavior in zero gravity versus ground-based data for validation of microgravity advantages and de-risking of future orbital demonstrations of these technologies. The ability to conduct experiments in microgravity is a pivotal step in enabling electronic manufacturing technology in space for both terrestrial and deep space applications.

Cadre Francis↗