Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELASTIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Characterization of the mechanical and physical properties of TD-NiCr (Ni-20Cr-2ThO2) alloy sheet

Sheets of TD-NiCr processed using techniques developed to produce uniform material were tested to supply mechanical and physical property data. Two heats each of 0.025 and 0.051 cm thick sheet were tested. Mechanical properties evaluated included tensile, modulus of elasticity, Poisson's Ratio, compression, creep-rupture, creep strength, bearing strength, shear strength, sharp notch and fatigue strength. Test temperatures covered the range from ambient to 1589K. Physical properties were also studied as a function of temperature. The physical properties measured were thermal conductivity, linear thermal expansion, specific heat, total hemispherical emittance, thermal diffusivity, and electrical conductivity.

Fritz, L. J.↗

Synthesis of Recycled Poly(ethylene terephthalate)/Polyacrylonitrile/Styrene Composite Nanofibers by Electrospinning and Their Mechanical Properties Evaluation

Consumption of polyethylene terephthalate (PET) products has increased dramatically in recent decades, resulting in the generation of a large amount of PET waste. For that reason, is necessary to find a new application of recycled material. In this article, we report the synthesis and characterization of recycled poly (ethylene terephthalate) (RPET) obtained from the chemical recycling of post-consumer PET bottles by glycolysis method and the formation of composites nanofibers RPET/polyacrylonitrile (PAN)/styrene (ST). The RPET synthesis was studied through infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA). The viscosity and frequency sweep of the polymeric solutions was evaluated. The composites nanofibers were elaborated by the electrospinning technique and characterized by scanning electron microscopy (SEM), FT-IR, TGA/DSC and nanoindentation. The RPET/PAN/ST composite nanofibers present an average diameter of 456 nm and higher thermal stability compared PAN fibers. The mechanical properties such as hardness and elastic modulus were 4.5 and 7.5 times PAN fibers values, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A First Principle Study of Half-Heusler Compounds CrTiZ (Z = P, As)

Half-Heusler compounds CrTiZ (Z = P, As) are studied in the framework of Density Functional Theory (DFT). Structural, mechanical, elastic, electronic, magnetic, and optical properties are derived using first principles. The full-potential linearized augmented plane wave (FP-LAPW) method is used for these investigations as implemented in the WIEN2k simulation package. We have found that the equilibrium lattice parameters are in the range 5.5–5.9 Å. Small band gaps of 0.5–0.6 eV in the minority spin-down states are observed. On the other hand, in the majority spin-up states, there is no band gap. Hence, the compounds are of half-metallic nature, having 100 % polarization at Fermi level. Comparatively, a higher total magnetic moment of ∼ 3μ{sub B} is found for both the compounds. Furthermore, optical properties are derived using dielectric function. Reflectivity, refractive index, conductivity and absorption coefficient are calculated. It is revealed from the imaginary part of the dielectric function that the compounds are optically metallic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Future of Spatially-Resolved Polychromatic Neutron and X-Ray Microdiffraction

Polychromatic microdiffraction is an emerging materials-characterization tool made practical by powerful X-ray and neutron sources, and by advanced optics and software. With polychromatic techniques, local crystalline properties including phase, texture (orientation), elastic strain, and defect density can be mapped with submicron spatial resolution in three dimensions. Here, we describe the evolving ability to nondestructively map local crystal structure in three dimensions and discuss how future advances will help address long-standing issues of inhomogeneous grain growth, deformation, fracture, and elastic strain. Current and future applications impact virtually all materials including electronic, solar, and light-emitting-diode (LED) materials, nanomaterials, structural materials, and joining materials. In addition, the ability to focus small beams on small samples dramatically increases signal-to-noise and greatly reduces the cost for extreme environmental chambers required for high-pressure, high-temperature, high-magnetic field or corrosive environments. Polychromatic techniques efficiently use source brilliance and minimize the required sample volume, which is essential for hard-to-make materials, irreplaceable materials, and for radioactive, toxic, or otherwise dangerous materials. New polychromatic neutron capabilities will significantly extend the range of samples that can be studied with neutrons and presents important new scientific opportunities for studies of magnetic materials, low Z elements, fragile crystal structures, and small samples in extreme environments.

36 MATERIALS SCIENCE↗

Effects of Nb on Superelasticity and Low Modulus Properties of Metastable β-Type Ti-Nb-Ta-Zr Biomedical Alloys

In this work, a series of Ti-xNb-2Ta-3Zr (x = 25, 30, 35, 40 wt.%) alloys are designed, and the transformation of β-phase to α″ martensitic, β-phase stability, microstructure, mechanical properties and corrosion performance of these alloys are investigated. The phase analysis shows as the Nb content increases, the α″ phase in these alloys decreases, while the intensity of the two main peaks β(110) and β(211) of Ti-40Nb-2Ta-3Zr alloy is reduced. These results can be attributed to the variation of β-phase stability caused by Nb element of alloy and cold rolling process. The mechanical properties test shows that the elastic modulus (52 GPa) of the Ti-35Nb-2Ta-3Zr alloy is the lowest and the elongation (18.8%) is the maximum. In addition, the alloy is susceptible to β-phase elastic deformation and stress-induced martensitic transformation resulting in the highest recovery strain of the alloy (66.87%). The polarization curves show that the Ti-35Nb-2Ta-3Zr alloy has the highest corrosion potential (− 0.34 V) and the lowest corrosion current density (0.21 μA cm{sup −2}) exhibiting the best corrosion resistance.

36 MATERIALS SCIENCE↗

DFT+U study of the oxide-ion conductor pentalanthanum hexamolybdenum henicosaoxide

By means of first-principles calculations, the structural, elastic, electronic, magnetic and optical properties of pentalanthanum hexamolybdenum henicosaoxide (La{sub 5}Mo{sub 6}O{sub 21}) were studied in detail. No experimental or theoretical investigations of its physical properties have previously been reported in the literature. Our results reveal that La{sub 5}Mo{sub 6}O{sub 21} is metallic with high ionic character due to the oxygen composition. The bonding characterization was achieved by analysis of valence charge density and the electronic localized functions. Flexibility and ease of deformation of the tetrahedral units appears to be important for the ion conduction mechanisms. The magnetic moment was evaluated to be 8.03 {mu}{sub B}, principally induced by Mo d-orbitals and La f-orbitals and the polarization of the oxygen by molybdenum. The optical spectra were analyzed by means of the electronic structure. The future advances will depend on achieving a fundamental understanding of the structural, defect and mechanistic features of ion conducting materials. - Graphical abstract: Crystal structure and polyhedron view of pentalanthanum hexamolybdenum henicosaoxide La{sub 5}Mo{sub 6}O{sub 21}. Highlights: Black-Right-Pointing-Pointer Pentalanthanum hexamolybdenum henicosaoxide is an oxide-ion conductor. Black-Right-Pointing-Pointer La{sub 5}Mo{sub 6}O{sub 21} is metallic with high ionic character due to the presence of oxygen. Black-Right-Pointing-Pointer Mo d-orbitals are taking the major contribution in the magnetic moment followed by La f and then the O p-orbitals.

36 MATERIALS SCIENCE↗

Mechanical properties and negative thermal expansion of a dense rare earth formate framework

The fundamental mechanical properties of a dense metal–organic framework material, [NH{sub 2}CHNH{sub 2}][Er(HCOO){sub 4}] (1), have been studied using nanoindentation technique. The results demonstrate that the elastic moduli, hardnesses, and yield stresses on the (021)/(02−1) facets are 29.8/30.2, 1.80/1.83 and 0.93/1.01 GPa, respectively. Moreover, variable-temperature powder and single-crystal X-ray diffraction experiments reveal that framework 1 shows significant negative thermal expansion along its b axis, which can be explained by using a hinge–strut structural motif. - Graphical abstract: The structure of framework, [NH{sub 2}CHNH{sub 2}][Er(HCOO){sub 4}], and its indicatrix of thermal expansion. - Highlights: • The elastic modulus, hardness, and yield stress properties of a rare earth metal–organic framework material were studied via nanoindentation technique. • Variable-temperature powder X-ray diffraction experiments reveal that this framework shows significant negative thermal expansion along its b axis. • Based on variable-temperature single-crystal X-ray diffraction experiments, the mechanism of negative thermal expansion can be explained by a hinge–strut structural motif.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Composition on Mechanical Properties and Conductivity of the Dual-Ion Conductor Na 1+ x Mn x /2 Zr 2– x /2 (PO 4 ) 3 for Solid-State Batteries

Here we report the dependence of mechanical properties and ionic conductivity of the Na 1+ x Mn x /2 Zr 2– x /2 (PO 4 ) 3 (designated as NMZP) ionic conductor on its composition (with x = 0.5, 1.0, 1.5, and 2.0). Local mechanics was studied by instrumented nanoindentation, and the properties of interest included the elastic modulus, hardness, and fracture toughness. Overall, the material becomes more compliant and soft with the increase in the Na content. The elastic modulus reduces from 120 to 80 GPa, and nanoindentation hardness reduces from 7.8 to 4.2 GPa when x changes from 0.5 to 2.0. The relationship with fracture toughness ( K C ) is highly nonlinear: fracture toughness first decreases and then increases with the increase in the sodium content, reaching a maximum value of 0.89 MPa × m 1/2 at x = 2.0. Such a relationship was found to correlate with the formation of a glassy phase in NMZP at intermediate Na concentration. The maximum ionic conductivity coincides with the maximum fracture toughness in this material.

25 ENERGY STORAGE↗

An electrostatic spectral neighbor analysis potential for lithium nitride

Machine-learned interatomic potentials based on local environment descriptors represent a transformative leap over traditional potentials based on rigid functional forms in terms of prediction accuracy. However, a challenge in their application to ionic systems is the treatment of long-ranged electrostatics. Here, we present a highly accurate electrostatic Spectral Neighbor Analysis Potential (eSNAP) for ionic α-Li 3 N, a prototypical lithium superionic conductor of interest as a solid electrolyte or coating for rechargeable lithium-ion batteries. We show that the optimized eSNAP model substantially outperforms traditional Coulomb–Buckingham potential in the prediction of energies and forces, as well as various properties, such as lattice constants, elastic constants, and phonon dispersion curves. We also demonstrate the application of eSNAP in long-time, large-scale Li diffusion studies in Li 3 N, providing atomistic insights into measures of concerted ionic motion (e.g., the Haven ratio) and grain boundary diffusion. This work aims at providing an approach to developing quantum-accurate force fields for multi-component ionic systems under the SNAP formalism, enabling large-scale atomistic simulations for such systems.

36 MATERIALS SCIENCE↗

Quantum coherence and electric field control of the photodetached electron on elastic surface

The quantum dynamics of the photodetached electron of H{sup -} in electric field near a surface are studied in the time domain. The evolution of wave packet for different manifold eigenstates with limited lifetimes is obtain analytically. It is found that the quantum coherence and temporal evolution of surface electronic wave packet can be controlled by the laser central energy and electric field. The correspondence between classical and quantum mechanics is shown explicitly in the system. Numerical simulation shows that the temporal evolution of photodetached electronic wave packet on elastic surface exhibits some similar properties of time-resolved two-photon photoemission signal of surface electron.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methods for the In-Situ Characterization of Cast Austenitic Stainless Steel Microstructures

Cast austenitic stainless steel (CASS) that was commonly used in U.S. nuclear power plants is a coarse-grained, elastically anisotropic material. Its engineering properties made it a material of choice for selected designs of nuclear power reactor systems. However, the fabrication processes result in a variety of coarse-grain microstructures that make current ultrasonic in-service inspection of components quite challenging. To address inspection needs, new ultrasonic inspection approaches are being sought. However, overcoming the deleterious and variable effects of the microstructure on the interrogating ultrasonic beam may require knowledge of the microstructure, for potential optimization of inspection parameters to enhance the probability of detection (POD). The ability to classify microstructure type (e.g. polycrystalline or columnar) has the potential to guide selection of optimal NDE approaches. This paper discusses the application of ultrasonic and electromagnetic methods for classifying CASS microstructures, when making measurements from the outside surface of the component. Results to date demonstrate the potential of these measurements to discriminate between two consistent microstructures - equiaxed-grain material versus columnar-grain material. The potential for fusion of ultrasonic and electromagnetic measurements for in-situ microstructure characterization in CASS materials will be explored.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Ni-Mn-Ga shape memory nanoactuation

To probe finite size effects in ferromagnetic shape memory nanoactuators, double-beam structures with minimum dimensions down to 100 nm are designed, fabricated, and characterized in-situ in a scanning electron microscope with respect to their coupled thermo-elastic and electro-thermal properties. Electrical resistance and mechanical beam bending tests demonstrate a reversible thermal shape memory effect down to 100 nm. Electro-thermal actuation involves large temperature gradients along the nanobeam in the order of 100 K/μm. We discuss the influence of surface and twin boundary energies and explain why free-standing nanoactuators behave differently compared to constrained geometries like films and nanocrystalline shape memory alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

3D mapping of residual stresses in growing grains of partially recrystallized Gum Metal

The crystallographic orientations and residual stresses within recrystallizing grains in partially recrystallized beta titanium-Gum Metal-were examined non-destructively in 3D using synchrotron Differential Aperture X-ray Microscopy. Contrary to common assumptions, significant local stresses and stress variations are observed within the recrystallizing grains. The results reveal that the development of these local residual stresses depends on the plastic deformation mode and material's elastic constants, rather than grain properties such as size and orientation, or even the material's yield stress. This work provides insights valuable for the design of advanced materials with heterogeneous microstructures.

36 MATERIALS SCIENCE↗

An adjoint-based optimization method for jointly inverting heterogeneous material properties and fault slip from earthquake surface deformation data

SUMMARY Analysis of tectonic and earthquake-cycle associated deformation of the crust can provide valuable insights into the underlying deformation processes including fault slip. How those processes are expressed at the surface depends on the lateral and depth variations of rock properties. The effect of such variations is often tested by forward models based on a priori geological or geophysical information. Here, we first develop a novel technique based on an open-source finite-element computational framework to invert geodetic constraints directly for heterogeneous media properties. We focus on the elastic, coseismic problem and seek to constrain variations in shear modulus and Poisson’s ratio, proxies for the effects of lithology and/or temperature and porous flow, respectively. The corresponding nonlinear inversion is implemented using adjoint-based optimization that efficiently reduces the cost function that includes the misfit between the calculated and observed displacements and a penalty term. We then extend our theoretical and numerical framework to simultaneously infer both heterogeneous Earth’s structure and fault slip from surface deformation. Based on a range of 2-D synthetic cases, we find that both model parameters can be satisfactorily estimated for the megathrust setting-inspired test problems considered. Within limits, this is the case even in the presence of noise and if the fault geometry is not perfectly known. Our method lays the foundation for a future reassessment of the information contained in increasingly data-rich settings, for example, geodetic GNSS constraints for large earthquakes such as the 2011 Tohoku-oki M9 event, or distributed deformation along plate boundaries as constrained from InSAR.

Geochemistry & Geophysics↗

Spectroscopic evidence for the Fe3+ spin transition in iron-bearing δ-AlOOH at high pressure

δ-AlOOH has emerged as a promising candidate for water storage in the lower mantle and could have delivered water into the bottom of the mantle. To date, it still remains unclear how the presence of iron affects its elastic, rheological, vibrational, and transport properties, especially across the spin crossover. In this study, we conducted high-pressure X-ray emission spectroscopy experiments on a δ-(Al 0.85 Fe 0.15 ) OOH sample up to 53 GPa using silicone oil as the pressure transmitting medium in a diamond-anvil cell. We also carried out laser Raman measurements on δ-(Al 0.85 Fe 0.15 )OOH and δ-(Al 0.52 Fe 0.48 )OOH up to 57 and 62 GPa, respectively, using neon as the pressure-transmitting medium. Evolution of Raman spectra of δ-(Al 0.85 Fe 0.15 )OOH with pressure shows two new bands at 226 and 632 cm –1 at 6.0 GPa, in agreement with the transition from an ordered ( P 2 1 nm ) to a disordered hydrogen bonding structure ( Pnnm ) for δ-AlOOH. Similarly, the two new Raman bands at 155 and 539 cm –1 appear in δ-(Al 0.52 Fe 0.48 )OOH between 8.5 and 15.8 GPa, indicating that the incorporation of 48 mol% FeOOH could postpone the order-disorder transition upon compression. On the other hand, the satellite peak ( K β') intensity of δ-(Al 0.85 Fe 0.15 )OOH starts to decrease at ~30 GPa and it disappears completely at 42 GPa. That is, δ-(Al 0.85 Fe 0.15 )OOH undergoes a gradual electronic spin-pairing transition at 30–42 GPa. Furthermore, the pressure dependence of Raman shifts of δ-(Al 0.85 Fe 0.15 )OOH discontinuously decreases at 32–37 GPa, suggesting that the improved hydrostaticity by the use of neon pressure medium could lead to a relatively narrow spin crossover. Notably, the pressure dependence of Raman shifts and optical color of δ-(Al 0.52 Fe 0.48 )OOH dramatically change at 41–45 GPa, suggesting that it probably undergoes a relatively sharp spin transition in the neon pressure medium. Together with literature data on the solid solutions between δ-AlOOH and ε-FeOOH, we found that the onset pressure of the spin transition in δ-(Al,Fe)OOH increases with increasing FeOOH content. These results shed new insights into the effects of iron on the structural evolution and vibrational properties of δ-AlOOH. The presence of FeOOH in δ-AlOOH can substantially influence its high-pressure behavior and stability at the deep mantle conditions and play an important role in the deep-water cycle

58 GEOSCIENCES↗

ZFSP Proposal: Understanding the Physics and Chemistry of Iron Alloys relevant to the Conditions of Planetary Cores

Recent research results by the deep-Earth geoscience and astronomy communities have revealed a wealth of interesting and outstanding fundamental science questions about the interiors of terrestrial planets and exoplanets including the origin of the magnetic field in the iron core and its impact on the evolution of life, the alloying of light elements on physics and chemistry of the planet’s dynamic processes, and the discovery of super-rotation and heterogeneous behavior of the inner core. Resolving these questions requires a first-hand experimental database at relevant pressure-temperature (P-T) conditions, but is technically challenging using static diamond anvil cell (DAC) and dynamic shock wave efforts alone, due to their limited P-T conditions and analytical capabilities. However, the recent advent of new capabilities of Sandia’s Z-Machine, coupled with our recent developments in in-situ ellipsometry at the UT Austin and Sandia National Laboratory and first-principles calculations and geodynamic modelling capabilities at UC Berkeley, motivates the joint collaborative effort presented here. In this collaborative research, we will use the capabilities of Sandia’s Z-Machine to investigate the elastic, thermal transport and melting properties of material relevant to both Earth and exoplanets at their relative P-T conditions. Our long-term research goal is to better understand the physics and dynamics of planetary interiors through interdisciplinary collaborations between physicists, mineral physicists, theorists, geodynamicists, and astrophysicists. The conditions in the Earth and super-Earth can range up to ~300-500 GPa and ~5000-8000 K. We will couple these experiments with a unique set of diagnostics, to include a new ellipsometry capability, in order to sensitively measure conductivity of these materials, and phase changes, including melting. Specifically, the newly demonstrated capability of Z to shock materials to a given P-T along the Hugoniot, and then to apply a pressure ramp taking the material along an isentrope, provides a unique opportunity to obtain P-T conditions not accessible by traditional DAC technology, or through shocks simply along the Hugoniot. Our physics team will perform experiments and analyze results to determine the physics underlying iron alloys as high-energy planetary impactors, classic transition metal alloys, and iron-bearing periclase relevant to the interiors of rocky planets, including exoplanets. The experimental results so analyzed will provide data that our collaborative team of mineral physicists, geodynamics, seismologists, and astrophysicists will apply toward obtaining a fundamental understanding of the physical and chemical states of the terrestrial planets and exoplanets, including their chemical compositions, thermal transport behavior, origin of magnetic fields, and dynamic evolution of the planet.

58 GEOSCIENCES↗