Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Atomistic Mechanisms of Stress-Dependent Molten Salt Corrosion in NiCr Alloys

Ni-based structural alloys in molten salt environments often experience simultaneous mechanical loading and corrosive attack, yet the mechanisms governing stress-corrosion interactions remain unclear. Prior studies largely emphasize tensile stress, while the role of compressive stress has received limited attention. Here, reactive molecular dynamics simulations are used to investigate the coupled effects of applied strain and corrosion in Ni 0.75 Cr 0.25 exposed to molten FLiNaK at 800 °C. A Σ5(210) grain boundary model is subjected to tensile (+4%) to compressive (−4%) uniaxial strains, and corrosion behavior is evaluated through fluorine adsorption, charge redistribution, and grain boundary evolution. Tensile strain accelerates intergranular corrosion susceptibility by reducing local atomic packing through elastic dilation and increasing excess free volume at the grain boundary, which enhances atomic mobility and salt infiltration. In contrast, compressive strain can suppress corrosion by promoting the formation of a ridge-like surface layer along the grain boundary, limiting salt access to the underlying alloy. These results provide atomistic insight into how stress states influence grain boundary corrosion in molten salts.

36 - MATERIALS SCIENCE↗
DOE OSTI2025

Shear Response of Ionizable Polymer Melts at the Crossover from Ionomers to Polyelectrolytes

Nonlinear shear response of polymers is affected by inherent barriers for diffusive motion, including entanglements and topology. In ionizable polymers, ionic clusters further constrain the intrinsic dynamics of the polymers, significantly enhancing their viscosity. Here, using fully atomistic molecular dynamics simulations, the nonlinear shear response of ionizable polymers is presented, across the transition from the ionomer regime where distinctive clusters dominate the structure to the polyelectrolyte regime where clusters percolate, in polystyrene randomly sulfonated with fractions of SO 3 − groups of f = 0.20 and 0.35, in pristine and tetrahydrofuran (THF) swollen polyelectrolyte melts. For f = 0.20, the ionic clusters first fracture into smaller clusters followed by splitting into individual ionic groups and eventually reform. At higher f, the clusters morph in shape but do not break under high shear. At very high shear rates, all of the chains stretch and recoil rapidly. As the shear rate is reduced, some chains stretch and recoil, while others remain largely unaffected by the shear. Macroscopically, for all systems, the shear viscosity displays initially an elastic response, followed by nonlinear shear stress overshoot and, eventually, a steady state. The evolution of viscosity with time and shear reflects that of the ionizable domains.

cluster chemistry↗
DOE OSTI2023

Model for Humidity-Mediated Diffusion on Aluminum Surfaces and Its Role in Accelerating Atmospheric Aluminum Corrosion

Bare aluminum metal surfaces are highly reactive, which leads to the spontaneous formation of a protective oxide surface layer. Because many subsequent corrosive processes are mediated by water, the structure and dynamics of water at the oxide interface are anticipated to influence corrosion kinetics. Here, using molecular dynamics simulations with a reactive force field, we model the behavior of aqueous aluminum metal ions in water adsorbed onto aluminum oxide surfaces across a range of ion concentrations and water film thicknesses corresponding to increasing relative humidity. We find that the structure and diffusivity of both the water and the metal ions depend strongly on the humidity of the environment and the relative height within the adsorbed water film. Aqueous aluminum ion diffusion rates in water films corresponding to a typical indoor relative humidity of 30% are found to be more than 2 orders of magnitude slower than self-diffusion of water in the bulk limit. Connections between metal ion diffusivity and corrosion reaction kinetics are assessed parametrically with a reductionist model based on a 1D continuum reaction–diffusion equation. Our results highlight the importance of incorporating the properties specific to interfacial water in predictive models of aluminum corrosion.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Control of Permanent Porosity in Type 3 Porous Liquids via Solvent Clustering

Porous liquids (PLs) are an exciting new class of materials for carbon capture due to their high gas adsorption capacity and ease of industrial implementation. They are composed of sorbent particles suspended in a nonadsorbed solvent, forming a liquid with permanent porosity. While PLs have a vast number of potential compositions based on the number of solvents and sorbent materials available, most of the research has been focused on the selection of the sorbent rather than the solvent. Therefore, PL design criteria on the supramolecular structures of the solvent are explored to create a fundamental understanding of how the solvent enables PL formation for rapid discovery of new PL compositions. Atomistic molecular dynamics simulation of eight solvents with a range of molecular sizes, shapes, and intramolecular bonding was performed, identifying that the shape and size of molecular clusters formed in the solvent are the driving predictor of PL formation rather than the size of the individual solvent molecule. The results demonstrate a significant departure from common approaches to PL formation based on the steric exclusion of solvent molecules from the sorbent via the size of the pore aperture. A modeling and experimental validation study further supports these findings. In conclusion, through this computational material design study, a previously unexplored mechanism in PL formation, solvent–solvent clustering, is identified as a critical factor for the accelerated discovery of liquid phase carbon capture materials.

Carbon capture↗
DOE OSTI2022

Tracking structural solvent reorganization and recombination dynamics following e – photoabstraction from aqueous I – with femtosecond x-ray spectroscopy and scattering

Here we present a sub-picosecond resolved investigation of the structural solvent reorganization and geminate recombination dynamics following 400 nm two-photon excitation and photodetachment of a valence p electron from the aqueous atomic solute, I–(aq). The measurements utilized time-resolved X-ray Absorption Near Edge Structure (TR-XANES) spectroscopy and X-ray Solution Scattering (TR-XSS) at the Linac Coherent Light Source x-ray free electron laser in a laser pump/x-ray probe experiment. The XANES measurements around the L 1 -edge of the generated nascent iodine atoms (I 0 ) yield an average electron ejection distance from the iodine parent of 7.4 ± 1.5 Å with an excitation yield of about 1/3 of the 0.1M NaI aqueous solution. The kinetic traces of the XANES measurement are in agreement with a purely diffusion-driven geminate iodine–electron recombination model without the need for a long-lived (I 0 :e–) contact pair. Nonequilibrium classical molecular dynamics simulations indicate a delayed response of the caging H 2 O solvent shell and this is supported by the structural analysis of the XSS data: We identify a two-step process exhibiting a 0.1 ps delayed solvent shell reorganization time within the tight H-bond network and a 0.3 ps time constant for the mean iodine–oxygen distance changes. The results indicate that most of the reorganization can be explained classically by a transition from a hydrophilic cavity with a well-ordered first solvation shell (hydrogens pointing toward I–) to an expanded cavity around I 0 with a more random orientation of the H 2 O molecules in a broadened first solvation shell.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Controlling Deformation in Al/Ti: How Interface Roughness and Orientation Drive Bimetal Mechanics

The microstructural characteristics and morphology of interfaces in metals can be crucial in governing the initiation of plasticity and early deformation mechanisms under extreme conditions. During high-strain-rate deformation, these interfaces significantly affect dislocation nucleation, twinning, and other mechanisms that directly impact material strength and failure. Despite their importance, a substantial knowledge gap remains between the observed macroscopic material behavior and the underlying role of bimetal interfaces in plasticity initiation. Here, to address this gap, large-scale molecular dynamics simulations are performed on Al/Ti bimetal structures to examine the effect of interface characteristics on the onset of plasticity under uniaxial compression. Specifically, this study investigates how interface roughness (flat vs waveform interfaces) modifies the initiation of plastic events in the microstructure. Atomistic simulations indicate that interface roughness (a microscopic behavior) reduces the stress required for dislocation nucleation, thereby reducing the peak stress relative to a flat interface. For the square interface, the step height strongly influences plasticity initiation by setting the separation of locally flat regions. Varying the interface rotation relative to the loading direction (macroscopic behavior) reveals that the peak stress for both flat and waveform interfaces initially decreases and then increases with rotation, accompanied by a shift in dominant mechanisms—from Al twinning (flat) to interface sliding and Ti-dominated phase transformation and twinning at lower angles. The change in the stress-strain slope during initial compression reflects how rotation alters the resolved shear stress and activates different slip systems. Overall, the study provides valuable insights into the role of bimetal interfaces in controlling plasticity initiation and early deformation pathways for Al/Ti under extreme loading conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Experimental and Computational Insights into the Structural Dynamics of the Fc Fragment of IgG1 Subtype from Biosimilar VEGF‐Trap

The constant fragment (Fc) of the immunoglobulin G1 (IgG1) subtype is increasingly recognized as a crucial scaffold in the development of advanced therapeutics due to its enhanced specificity, efficacy, and extended half‐life. A prime example is VEGF‐Trap (Aflibercept), a recombinant fusion protein that merges the Fc region of the IgG1 subtype with the binding domains of vascular endothelial growth factor receptors (VEGFR)‐1 and VEGFR‐2. The Fc region's role in N‐glycosylation is particularly important, as it significantly influences protein stability. Herein, the first near‐physiological temperature structures of the N‐glycan‐bound Fc fragment of IgG1 subtype from a biosimilar VEGF‐Trap are presented, determined using the SPring‐8 Angstrom Compact free electron LAser (SACLA) and the Turkish Light Source (Turkish DeLight). Comparative analysis with cryogenic structures, including existing data, reveals alternate conformations within the glycan‐binding pocket. Furthermore, molecular dynamics simulations indicate the presence of a high degree of structural plasticity, explaining how the protein adapts its structure through conformational changes. The observed structural fluctuations/conformational changes demonstrate the effect of N‐glycans on protein stability. These findings offer new insights into the molecular basis of Fc‐mediated functions and provide valuable information for the design of next‐generation therapeutics.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2026

Physics-informed machine learning exploration of Na storage mechanisms in disordered carbon

Sodium-ion batteries are a cost-effective, sustainable alternative to lithium-ion systems for large-scale energy storage. However, optimizing sodium storage in carbon-based anodes with microstructural complexity and atomic disorder remains a major challenge. The intrinsic inhomogeneity of these materials produces diverse local environments, making it difficult for conventional methods to predict and control ion dynamics. Hard carbon (HC) anodes, composed of ranges of ordered-to-disordered graphitic and amorphous nanodomains, offer tunable ion storage and rate capacity, yet rationale design remains a challenge due to poorly understood correlation between local atomic feature and ion transport mechanism. Here, to address this challenge, we introduce a data-driven framework that integrates validated machine-learned interatomic potentials, large-scale molecular dynamics simulations, and machine learning to elucidate sodium transport mechanisms as a function of carbon and sodium loading densities. By computing per-ion structural descriptors and applying unsupervised learning, we identify distinct diffusion modes governed by microscopic features. Supervised analysis and correlation mapping then establish quantitative links between these transport regimes and processing variables such as bulk carbon density and sodium content. This physics-informed approach establishes quantitative structure–transport relationships and offers actionable design principles for engineering high-performance HC anodes.

Data-driven framework↗
DOE OSTI2022

Multilevel Computational Studies Reveal the Importance of Axial Ligand for Oxygen Reduction Reaction on Fe–N–C Materials

The systematic improvement of Fe–N–C materials for fuel cell applications has proven challenging, due in part to an incomplete atomistic understanding of the oxygen reduction reaction (ORR) under electrochemical conditions. Herein, a multilevel computational approach, which combines ab initio molecular dynamics simulations and constant potential density functional theory calculations, is used to assess proton-coupled electron transfer (PCET) processes and adsorption thermodynamics of key ORR intermediates. These calculations indicate that the potential-limiting step for ORR on Fe–N–C materials is the formation of the Fe III –OOH intermediate. They also show that an active site model with a water molecule axially ligated to the iron center throughout the catalytic cycle produces results that are consistent with the experimental measurements. In particular, reliable prediction of the ORR onset potential and the Fe(III/II) redox potential associated with the conversion of Fe III –OH to Fe II and desorbed H 2 O requires an axial H 2 O co-adsorbed to the iron center. The observation of a five-coordinate rather than four-coordinate active site has significant implications for the thermodynamics and mechanism of ORR. Importantly, these findings highlight the importance of solvent–substrate interactions and surface charge effects for understanding the PCET reaction mechanisms and transition-metal redox couples under realistic electrochemical conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Atomistic insights into the heat conductance across the interfaces between erythritol and different metals: A non-equilibrium molecular dynamics study

The heat conductance across the interface between a phase change material (PCM) and the metal shell is important for thermal design of latent heat storage systems. Non-equilibrium molecular dynamics simulations were carried out in this work to unravel, at the atomistic level, the interfacial heat conductance mechanisms between erythritol (the most promising medium-temperature polyol PCM) and two different metals (i.e., copper and aluminum). The interfacial contact ratio was introduced as a parameter to represent different contact conditions at the interfaces, for example, different surface roughness levels of the metals. It was found that with the increase of interfacial contact ratio, the temperature difference between the erythritol/metal interfaces decreases, whereas the interfacial heat transfer coefficient increases gradually. At the perfect contact condition, i.e., the interfacial contact ratio reaches 100%, the interfacial heat transfer coefficients across the erythritol/Cu and erythritol/Al interfaces were predicted to be 398 ± 26 MW/m 2 K and 544 ± 11 MW/m 2 K, respectively. The interfacial heat conductance of erythritol/Al is better than that of erythritol/Cu. The mismatch of atomic spectral density across the interfaces between erythritol and the two metals was analyzed and distinguished. These results could guide the selection of packaging materials and the thermal design of erythritol-based latent heat storage systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Ordering in liquid and its heredity impact on phase transformation of Mg-Al-Ca alloys

It is a long-sought goal to achieve desired mechanical properties through tailoring phase formation in alloys, especially for complicated multi-phase alloys. In fact, unveiling nucleation of competitive crystalline phases during solidification hinges on the nature of liquid. Here we employ ab initio molecular dynamics simulations (AIMD) to reveal liquid configuration of the Mg-Al-Ca alloys and explore its effect on the transformation of Ca-containing Laves phase from Al 2 Ca to Mg 2 Ca with increasing Ca/Al ratio (r Ca/Al ). There is structural similarity between liquid and crystalline phase in terms of the local arrangement environment, and the connection schemes of polyhedras. The forming signature of Mg 2 Ca, as hinted by the topological and chemical short-range order originating from liquid, ascends monotonically with increasing r Ca/Al . However, Al 2 Ca crystal-like order increase at first and then decrease at the crossover of r Ca/Al = 0.74, corresponding to experimental composition of phase transition from Al 2 Ca to Mg 2 Ca. The origin of phase transformation across different compositions lies in the dense packing of atomic configurations and preferential bonding of chemical species in both liquid and solid. The present finding provides a feasible scenario for manipulating phase formation to achieve high performance alloys by tailoring the crystal-like order in liquid.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structure-Based Design of Small-Molecule Inhibitors of Human Interleukin-6

Human Interleukin-6 (hIL-6) is a pro inflammatory cytokine that binds to its receptor, IL-6Rα followed by binding to gp130 and subsequent dimerization to form a hexamer signaling complex. As a critical inflammation mediator, hIL-6 is associated with a diverse range of diseases and monoclonal antibodies in clinical use that either target IL-6Rα or hIL-6 to inhibit signaling. Here, we perform high-throughput structure-based computational screening using ensemble docking for small-molecule antagonists for which the target conformations were taken from 600 ns long molecular dynamics simulations of the apo protein. Prior knowledge of the contact sites from binary complex studies and experimental work was incorporated into the docking studies. The top 20 scoring ligands from the in silico studies after post analysis were subjected to in vitro functional assays. Among these compounds, the ligand with the second-highest calculated binding affinity experimentally showed an ~84% inhibitory effect on IL6-induced STAT3 reporter activity at 10 μM concentration. This finding may pave the way for designing small-molecule inhibitors of hIL-6 of therapeutic significance.

Human Interleukin-6↗
DOE OSTI2020

Thermal conductance enhanced via inelastic phonon transport by atomic vacancies at Cu/Si interfaces

Understanding and controlling heat transfer across interfaces has become an important issue for the performance of micro- and nanoscale electronics, as well as achieving a high figure of merit for thermoelectrics. Intrinsic and extrinsic defects can have a significant impact on thermal transport in bulk materials and across interfaces, but the mechanism is not well understood. Here, nonequilibrium molecular dynamics simulations are used to determine the impact of interfacial atomic vacancies on thermal transport across a Cu/Si junction. In contrast to the reduction in thermal transport typically seen with bulk defects, we find that by introducing atomic vacancies at a concentration of 6.3% near the interface in either or both materials, the interfacial thermal conductance can be increased by up to 76%. By controlling the initial positions of the vacancies and keeping track of their movements and population, we find that interfacial thermal transport is dependent on temperature, vacancy concentration, and distribution, and a positive correlation between the conductance and point defect activities (extent of vacancy migration, rate of Frenkel defect creation and annihilation) is observed. Further calculations based on the phonon density of states and normal mode decomposition reveal that the increase in interfacial thermal conductance originates primarily from high-frequency phonons, supported by enhanced inelastic phonon transport which contributes to more than 60% of the increase. Our findings suggest a practical way to manipulate inelastic phonon conversion through the presence of defects, which provides an alternative perspective on improving thermal transport between materials with a large lattice mismatch.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Impact of functional groups on the electrocatalytic hydrogenation of aromatic carbonyls to alcohols

We report that electrocatalytic hydrogenation (ECH) of biomass-derived feedstocks has a critical dependence on the molecular structure of the organic and its adsorption on the electrode surface. In this study, we investigated the role of functional groups in the adsorption of the organic molecule on the charged Pd (111) surface and its subsequent effect on organic reduction in electrochemical hydrogenation of organic molecules. With three aromatic carbonyls of benzaldehyde (BZD), acetophenone (ACE), and vanillin (VAN), we rationalize molecular-scale adsorption and interfacial charge transfer processes by employing density-functional-theory based ab initio molecular dynamics simulations. We observe that the functional group and electrode charge strongly affect the proximity of organic molecule to the Pd (111) surface, where distances of aromatic ring and carbonyl group of the organic on the electrode change distinctively with functional groups and charge state of electrode, which strongly impact reduction of organics on the surface. Calculations of differential electron density show the strongest reduction with benzaldehyde via interfacial electron transfer from the charged Pd surface. We also observe that the interaction between the functional groups and solvent (VAN > BZD > ACE) significantly influence the organic interaction with the charged electrode (BZD > VAN > ACE), resulting in the net interaction energy between the organic and the electrode in the order of BZD > ACE > VAN. Experimental measurement of ECH rate also show the same trend of the net interaction energy. These results demonstrate the significance of solvent effect on the reducibility of organic molecules on electrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Infrared spectral signatures of interfacial water at TiO 2 –electrolyte interfaces from deep potential molecular dynamics

Vibrational spectroscopy is a powerful tool for probing water at oxide–electrolyte interfaces, but its molecular interpretation can be challenging. Here, we employ deep potential long-range molecular dynamics simulations with layer-resolved spectral analysis to investigate the microscopic origins of the infrared (IR) response of water at the interface with anatase TiO 2 (101), a prototypical oxide surface. The calculated interfacial spectra exhibit characteristic modifications compared to bulk water IR spectra, including enhanced intensities, a red shifted and broadened stretching band, and a higher-frequency shoulder, in qualitative agreement with experiments. Spectral decomposition shows that these signatures originate mainly from the first interfacial water layer, dominated by surface-bound H 2 O at Ti 5C sites, with secondary contributions from the second layer. A moderate salt concentration (0.4 M NaCl) leaves both the interfacial structure and the spectra essentially unchanged, while tuning the pH strongly modulates the spectral intensity. We establish a scaling relation linking the spectral intensity to the surface water dissociation fraction and the dipole moment, both governed by interfacial electric fields. These findings provide a microscopic framework for interpreting IR spectra of oxide–electrolyte interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Elucidating the Onset of Plasticity in Sliding Contacts Using Differential Computational Orientation Tomography

Abstract Depending on the mechanical and thermal energy introduced to a dry sliding interface, the near-surface regions of the mated bodies may undergo plastic deformation. In this work, we use large-scale molecular dynamics simulations to generate “differential computational orientation tomographs” (dCOT) and thus highlight changes to the microstructure near tribological FCC alloy surfaces, allowing us to detect subtle differences in lattice orientation and small distances in grain boundary migration. The analysis approach compares computationally generated orientation tomographs with their undeformed counterparts via a simple image analysis filter. We use our visualization method to discuss the acting microstructural mechanisms in a load- and time-resolved fashion, focusing on sliding conditions that lead to twinning, partial lattice rotation, and grain boundary-dominated processes. Extracting and laterally averaging the color saturation value of the generated tomographs allows us to produce quantitative time- and depth-resolved maps that give a good overview of the progress and severity of near-surface deformation. Corresponding maps of the lateral standard deviation in the color saturation show evidence of homogenization processes occurring in the tribologically loaded microstructure, frequently leading to the formation of a well-defined separation between deformed and undeformed regions. When integrated into a computational materials engineering framework, our approach could help optimize material design for tribological and other deformation problems. Graphic Abstract .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Impact of solvation on the electronic resonances in uracil

Interactions of low-energy electrons with the DNA and RNA nucleobases are known to form metastable states, known as electronic resonances. In this work, we study electron attachment to solvated uracil, an RNA nucleobase, using the orbital stabilization method at the Equation of Motion-Coupled Cluster for Electron Affinities with Singles and Doubles (EOM-EA-CCSD) level of theory with the Effective Fragment Potential (EFP) solvation method. We benchmarked the approach using multireference methods, as well as by comparing EFP and full quantum calculations. The impact of solvation on the first one particle (1p) shape resonance, formed by electron attachment to the π* LUMO orbital, as well as the first two particle one hole (2p1h) resonance, formed by electron attachment to neutral uracil's π–π* excited state, was investigated. We used molecular dynamics simulations for solvent configurations and applied charge stabilization technique-based biased sampling to procure configurations adequate to cover the entire range of the electron attachment energy distribution. The electron attachment energy in solution is found to be distributed over a wide range of energies, between 4.6 eV to 6.8 eV for the 2p1h resonance, and between −0.1 eV to 2 eV for the 1p resonance. The solvent effects were similar for the two resonances, indicating that the exact electron density of the state is not as important as the solvent configurations. Multireference calculations extended the findings showing that solvation effects are similar for the lowest four resonances, further indicating that the specific solute electron density is not as important, but rather the water configurations play the most important role in solvation effects. Lastly, by comparing bulk solvation to clusters of uracil with a few water molecules around it, we find that the impact of microsolvation is very different from that of bulk solvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Computational determination of a primary diffusion mode in γ U-10Mo under irradiation

Low enriched uranium (< 20 % 235 U)-molybdenum (U-Mo) monolithic fuel is the primary candidate for high performance research and test reactors, and is in the process of being qualified to replace highly enriched uranium (≥ 20 % 23 5U) fuel. As part of the qualification process, it is critical to understand and predict the behavior of fission gas bubbles under irradiation, which affects fuel swelling and fuel failure. Mechanistic fuel models are being developed that can both reproduce the existing experimental data for fuel swelling, and be further applied to irradiation conditions beyond the experimental scope. Diffusion of species under irradiation conditions is an important parameter in the mechanistic fuel models; however, no temperature-relevant experimental diffusion data exists. In the present work, radiation-enhanced diffusion coefficients of U, Mo, and Xe in λU-10wt.%Mo were calculated in the temperature range between 300 K and 1400 K via rate-theory models and molecular dynamics simulations with an embedded-atom method interatomic potential for the U-Mo-Xe system. Accordingly, total diffusion coefficients under relevant irradiation conditions are determined using previously obtained intrinsic thermal diffusion and radiation-driven diffusion coefficients, as well as the newly calculated radiation-enhanced diffusion coefficients presented herein. Radiation-enhanced diffusion of U and Mo was dominant in the intermediate temperature range, whereas radiation-enhanced diffusion of Xe did not significantly contribute to total diffusion of Xe at the relevant fission rate densities. Radiation-enhanced diffusion of Xe became faster than both intrinsic thermal diffusion and radiation-driven diffusion at a fission rate density of 5 x 10 22 fissions/m 3 /s, which is higher than the typical fission rate density range in research reactors. The temperature regime that radiation-enhanced diffusion of each element dominated was dependent on the fission rate density. Finally, the total diffusion coefficients of U, Mo, and Xe, updated in this work, will be utilized as parameters in the mechanistic fuel models to help predict the behavior of fission gas bubbles under irradiation more accurately.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗