Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Determinants”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Maternal nutritional status during pregnancy and surma use determine cord lead levels in Karachi, Pakistan

Objectives: To estimate the umbilical cord blood lead levels (BLLs) of Pakistani neonates and to identify determinants for umbilical BLLs. Methods: We conducted a cross-sectional study of mothers and infants at one of the two obstetric units of two tertiary care hospitals in Karachi during January-August 2005. Information from 540 mothers selected randomly from those registered for delivery was obtained about their pregnancy, diet, and current and past lead exposures. We collected umbilical cord blood for lead levels analyzed using graphite furnace atomic absorption spectrophotometry. We computed geometric and arithmetic means. We performed multiple linear regression analysis to identify factors associated with log-transformed umbilical cord BLLs. We also performed logistic regression analysis to identify determinants of high lead cord BLLs ({>=}10 {mu}g/dl). Results: The geometric mean cord BLL of the neonates was 9.6 {mu}g/dl; arithmetic mean (S.D.) was 10.8 {mu}g/dl (5.7) with a median of 9.7 {mu}g/dl and a range of 1.8-48.9 {mu}g/dl. Women who reported intake of less than 58.5 mg of elemental iron supplement per day during pregnancy had cord BLL of 10.0 {mu}g/dl; in comparison those women who had higher iron intake had lower cord BLL (8.4 {mu}g/dl). Those who used surma (an eye cosmetic) daily had higher cord BLL (11.5 {mu}g/dl) as compared to those who used it less frequently (9.4 {mu}g/dl). In multivariable linear regression model, higher iron intake, owning a car, and being in 2nd quartile of mid-arm circumference were associated with low lead levels while father's occupation in lead-based industry was associated with significantly higher umbilical cord BLLs. There was interaction of daily surma use and ethnicity. Geometric mean BLLs were varied among surma users by ethnicity. Conclusions: Umbilical cord BLLs are high in Karachi, Pakistan, in comparison to those in developed countries such as United States. Measures are needed to reduce fetal lead exposure to prevent adverse affect on neurocognitive development. Association of low iron (below RDA of 60 mg per day) with high umbilical cord has implications for strengthening iron supplement intake during pregnancy. Umbilical cord BLLs differed among surma users by ethnicity.

60 APPLIED LIFE SCIENCES↗

Polychlorinated biphenyls in Spanish adults: Determinants of serum concentrations

Background: Polychlorinated biphenyls (PCBs) are persistent compounds that may pose an environmental hazard to humans, food being the main source of exposure for the general population. Objective: To measure the serum concentrations of the main PCBs in subjects from the general population in Spain, and to assess potential determinants of such concentrations. Methods: Serum was obtained from blood samples of 953 subjects aged 35-64 years, residents in five Spanish regions (three from the North and two from the South), randomly selected from the EPIC-Spain cohort. Blood collection took place during 1992-1996 and four PCB congeners (118, 138, 153 and 180) were determined by means of gas chromatography with electron-capture detection (GC-ECD). Results: The concentration of total PCBs was 459 ng/g lipids (or 3.1 {mu}g/l); the corresponding figures for PCB 153 were 186 ng/g lipids and 1.25 {mu}g/l. Men had higher values than women, PCB levels increased with age, and serum concentration of PCBs was higher in northern regions. Body mass index (BMI) was inversely related to PCB concentrations, and fish intake was the dietary factor showing the greatest association with serum PCBs. The pattern described was similar for each congener separately. Conclusions: We found concentrations similar to those reported in European countries where blood collection was carried during the same period. Regional differences within Spain are not fully explained by anthropometric or dietary factors. The inverse association with BMI suggests that in the mid-1990s there was still ongoing or recent exposure to PCBs in Spain.

60 APPLIED LIFE SCIENCES↗

Determinants of serum cadmium levels in a Northern Italy community: A cross-sectional study

Introduction: Cadmium (Cd) is a heavy metal and a serious environmental hazard to humans. Some uncertainties still exist about major sources of Cd exposure in non-occupationally exposed subjects in addition to cigarette smoking, such as diet and outdoor air pollution. We sought to determine the influence of these sources on a biomarker of exposure, serum Cd concentration. Methods: We recruited 51 randomly selected residents from an Italian urban community, from whom we obtained detailed information about dietary habits and smoking habits, and a blood sample for serum Cd determination. We also assessed outdoor air Cd exposure, by modeling outdoor air levels of particulate matter ≤10 µm (PM{sub 10}) from motorized traffic at geocoded subjects’ residence. Results: In crude analysis, regression beta coefficients for dietary Cd, smoking and PM10 on serum Cd levels were 0.03 (95% CI -0.83 to 0.88), 6.96 (95% CI -0.02 to 13.95) and 0.62 (95% CI -0.19 to 1.43), respectively. In the adjusted analysis, regression beta coefficients were -0.34 (95% CI -1-40 to 0.71), 5.81 (95% CI -1.43 to 13.04) and 0.47 (95% CI -0.35 to 1.29), respectively. Conclusion: Cigarette smoking was the most important factor influencing serum Cd in our non-occupationally exposed population, as expected, while dietary Cd was not associated with this biomarker. Outdoor air pollution, as assessed through exposure to particulate matter generated by motorized traffic, was an additional source of Cd exposure. - Highlights: • Smoking markedly increases serum Cd levels in non-occupationally exposed individuals. • Overall dietary Cd intake shows little association with serum Cd levels. • Air pollution from motorized traffic increases serum Cd levels.

54 ENVIRONMENTAL SCIENCES↗

Factors determining the exposure of dairy farmers to thoracic organic dust

Highlights: • Dairy farming exposes to thoracic dusts containing bacteria and moulds. • Specific tasks and farm characteristics control exposures to thoracic organic dusts. • Temperature and hygrometry also control the levels of organic dust exposure. Bronchial respiratory diseases are more common in dairy farmers than in the general population, perhaps because the repeated inhalation of organic dust contributes to the development of these disorders. However, the factors determining the exposure of farmers to particles that can enter the lower bronchial tract and interact with it, i.e. the thoracic fraction of the inhalable dust, remain to be identified. We therefore measured the exposure of dairy farmers to thoracic organic dust and identified the farm features and tasks that increased exposure. We measured thoracic particles (n = 110) and farm characteristics and occupational tasks in 29 Brittany dairy farms. The mean (GM) (geometric standard deviation, GSD) concentration of thoracic dust in air inhaled by farmers was 0.24 mg/m{sup 3} (2.8) and the concentrations of endotoxins, Gram-positive bacteria and fungi in the thoracic fraction were 128 EU/m{sup 3} (4.0), 960 CFU/m{sup 3} (6.3) and 690 CFU/m{sup 3} (5.4), respectively. Model-based estimates of the association between exposure, farm features and tasks indicated that manual grain and feed handling and mechanical bedding spreading significantly increased exposure to thoracic dust, endotoxins, bacteria and fungi. Exposure to bacteria and fungi was reduced by cowsheds divided into cubicles, whereas using automatic muck scrappers in alleyway and automatic milking tended to increase exposure to bacteria and endotoxins. Finally, exposure to endotoxin and fungi were reduced by warmer farm buildings and well-ventilated buildings having walls with large openings. In conclusions, major occupational tasks and specific farm features determine the exposure of Breton dairy farmers to thoracic organic dust.

54 ENVIRONMENTAL SCIENCES↗

Menstrual cycle characteristics as determinants of plasma concentrations of perfluoroalkyl substances (PFASs) in the Norwegian Mother and Child Cohort (MoBa study)

Highlights: • Menstrual cycles were examined as determinants of perfluoroalkyl substances (PFASs). • Irregular cycles were not associated with PFASs. • Overall, menstrual cycle length was not associated with PFAS concentrations. • In parous women, shorter cycles were associated with decreased PFHpS and PFOS. Perfluoroalkyl substances (PFASs) are fluorinated organic compounds that have been used in a variety of industrial and consumer applications. Menstruation is implicated as a possible route of elimination for PFASs in women. The overall purpose of this study was to examine menstrual cycle characteristics as determinants of plasma PFAS concentrations in women.

54 ENVIRONMENTAL SCIENCES↗

Melting and phase relations of Fe-Ni-Si determined by a multi-technique approach

Many studies have suggested silicon as a candidate light element for the cores of Earth and Mercury. However, the effect of silicon on the melting temperatures of core materials and thermal profiles of cores is poorly understood, due to disagreements among melt detection techniques, uncertainties in sample pressure evolution during heating, and sparsity of studies investigating the combined effects of nickel and silicon on the phase diagram of iron. Here, in this study we develop a multi-technique approach for measuring the high-pressure melting and solid phase relations of iron alloys and apply it to Fe 0.8 Ni 0.1 Si 0.1 (Fe-11wt%Ni-5.3wt%Si), a composition compatible with recent estimates for the cores of Earth and Mercury. This approach combines results (20-83 GPa) from two atomic-level techniques: synchrotron Mossbauer spectroscopy (SMS) and synchrotron x-ray diffraction (XRD). Melting is independently detected by the loss of the Mossbauer signal, produced exclusively by solid-bound iron nuclei, and the onset of a liquid diffuse x-ray scattering signal. The use of a burst heating and background updating method for quantifying changes in the reference background during heating facilitates the determination of liquid diffuse signal onsets and leads to strong reproducibility and excellent agreement in melting temperatures determined separately by the two techniques. XRD measurements additionally constrain the hcp-fcc phase boundary and in-situ pressure evolution of the samples during heating. We apply our updated thermal pressure model to published SMS melting data on fcc-Fe and fcc-Fe 0.9 Ni 0.1 to precisely evaluate the effect of silicon on melting temperatures. We find that the addition of 10 mol% Si to Fe 0.9 Ni 0.1 reduces melting temperatures by ~250 K at low pressures (<60 GPa) and flattens the hcp-fcc phase boundary. Extrapolating our results, we constrain the location of the hcp-fcc-liquid quasi-triple point at 147±14 GPa and 3140±90 K, which implies a melting temperature reduction of 500 K compared with Fe 0.9 Ni 0.1 . The results demonstrate the advantages of combining complementary experimental techniques in investigations of melting under extreme conditions.

36 MATERIALS SCIENCE↗

Experimental determination of pressure drop and statistical properties of oil-water intermittent flow through horizontal pipe

In this paper, oil-water slug flow is studied experimentally. After presenting the experimental set-up and the post-processing tools, flow maps and pressure drops are shown. The main focus of this piece of work is, however, the determination of the statistical behaviour of the elongated oil drops. The characteristic frequency of the process is determined by three estimators: the mean frequency, the most probable frequency, and the so-called diffusional frequency. All the tools give very similar results indicating a regular behaviour of the flow. The regularity was then further proved by means of both diffusional analysis and by the rescaled range analysis. The fractal dimension of the process was also estimated reinforcing again the conclusion that the flow is made up by highly coherent structures. (author)

02 PETROLEUM↗

Adaptive Interface-PINNs (AdaI-PINNs) for inverse problems: Determining material properties for heterogeneous systems

Here, we determine spatially varying discontinuous material properties using a domain-decomposition based physics-informed neural networks (PINNs) framework named the Adaptive Interface-PINNs or AdaI-PINNs (Roy et al., 2024). We propose the use of distinct neural networks for the field variables and material properties within each material, utilizing adaptive activation functions. While the neural networks across different materials share the same weights and biases, their activation functions are uniquely tailored using a hyperparameter that influences the slope of the activation function. The proposed framework is tested on several one-dimensional and two-dimensional benchmark examples, and its performance is compared with conventional PINNs and existing domain-decomposition PINNs frameworks, namely, the Multi-domain physics-informed neural network (M-PINN), and the eXtended physics-informed neural networks (XPINNs). The results demonstrate that the proposed approach can determine randomly distributed discontinuous material properties with an L 2 error of $\mathscr{O}$ (10 -3 ) for the material property and the root-mean-square error of $\mathscr{O}$ (10 -3 ) for the primary variable while the other approaches yield errors that are approximately two orders of magnitude larger (that is, $\mathscr{O}$ (10 -1 )). Moreover, the spatial distribution of material properties obtained using the proposed framework is in close agreement with the true distribution, whereas the other approaches fare much worse. Additionally, the proposed approach is approximately 40% faster than its competitors, indicating its potential as a robust alternative for solving inverse problems in heterogeneous materials.

36 MATERIALS SCIENCE↗

Effects of a Novel Acoustic Transmitter on Swimming Performance and Predator Avoidance of Juvenile Chinook Salmon: Determination of a Size Threshold

Abstract Telemetry studies are used worldwide to investigate the behavior and migration of fishes. The miniaturization of acoustic transmitters enables researchers to tag smaller fish, such as the juvenile life stages of salmon, thus representing a greater proportion of the population of interest. The development of an injectable acoustic transmitter has led to research determining the least invasive and quickest method of tag implantation. Swimming performance and predator avoidance were examined. To quantify critical swimming speed (Ucrit; an index of prolonged swimming performance) and predator avoidance for juvenile Chinook salmon (Oncorhynchus tshawytscha), fish were split into three groups: (1) fish implanted with a dummy injectable acoustic transmitter (IAT treatment), (2) fish implanted with a dummy injectable acoustic transmitter and passive integrated transponder (PIT) tag (IAT+PIT treatment), and (3) an untagged control group. The Ucrits and predator avoidance capability of tagged fish were compared with untagged fish to determine if carrying an IAT adversely affected swimming performance or predator avoidance. Fish implanted with only an IAT had lower Ucrit values than untagged fish and a size threshold at 79 mm fork length was found. Conversely, Ucrit values for fish implanted with an IAT+PIT were not significantly different from untagged controls and no size threshold was found. Predator avoidance testing showed no significant difference for fish implanted with an IAT compared to untagged individuals, nor was there a significant difference for IAT+PIT fish compared to untagged fish.

juvenile Chinook salmon, swimming performance, pre↗

Experimentally determined dissolution kinetics of Na-rich borosilicate glass at far from equilibrium conditions: Implications for Transition State Theory

Abstract—The dissolution kinetics of five chemically complex and two chemically simple borosilicate glass compositions (Na-B-Si±Al) were determined over a range of solution saturation values by varying the flow-through rates (1 to 100 mL d -1 ) in a dynamic single-pass flow-through (SPFT) apparatus. The chemically complex borosilicate glasses are representative of prospective hosts for radioactive waste disposal and are characterized by relatively high molar Si/(Si+Al) and Na/(Al+B) ratios (>0.7 and >1.0, respectively). Analysis by x-ray absorption spectroscopy (XAS) indicates that the fraction of ivB to iiiB (N 4 ) varies from 0.66 to 0.70. Despite large differences in bulk chemistry, values of δ 29 Si peak shift determined by MAS-NMR varies only by about 7 ppm (δ 29 Si = -94 to -87 ppm), indicating small differences in polymerization state for the glasses. Forward rates of reaction measured in dynamic experiments converge (average log10 rate [40°C, pH 9] = -1.87±0.79 [g/(m 2 •d)]) at high values of flow-rate (q) to sample surface area (S). Dissolution rates are independent of total Free Energy of Hydration (FEH) and this model appears to overestimate the impact of excess Na on chemical durability. For borosilicate glass compositions in which molar Na > Al + B, further addition of Na appears to stabilize the glass structure with respect to hydrolysis and dissolution. Compared to other borosilicate and aluminosilicate glasses, the glass specimens from this study dissolve at nearly the same rate (0 to ~55×) as the more polymerized glasses, such as vitreous reedmergnerite (NaBSi3O8), albite, and silica. Dissolution of glass follows the order: boroaluminosilicate glass > vitreous reedmergnerite > vitreous albite > silica glass, which is the same order of increasingly negative 29 Si chemical shifts. The chemical shift of 29 Si is a measure of the extent of bond overlap between Si and O and correlates with the forward rate of reaction. Thus, dissolution appears to be rate-limited by rupture of the Si—O bond, which is consistent with the tenants of Transition State Theory (TST). Therefore, dissolution at far from equilibrium conditions is dependent upon the speed of the rate-controlling elementary reaction and not on the sum of the free energies of hydration of the constituents of boroaluminosilicate glass.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Experimental and theoretical determinations of hydrogen isotopic equilibrium in the system CH 4 —H 2 —H 2 O from 3 to 200°C

The stable isotopic composition of methane (CH 4 ) is commonly used to fingerprint natural gas origins. Over the past 50 years, there have been numerous proposals that both microbial and thermogenic CH 4 can form in or later attain hydrogen isotopic equilibrium with water (H 2 O) and carbon isotopic equilibrium with carbon dioxide (CO 2 ). Evaluation of such proposals requires knowledge of the equilibrium fractionation factors between CH 4 and H 2 O or CO 2 at the temperatures where microbial and thermogenic CH 4 form in or are found in the environment, which is generally less than 200°C. Experimental determinations of these fractionation factors are only available above 200°C, requiring extrapolation of these results beyond the calibrated range or the use of theoretical calculations at lower temperatures. Here, we provide a calibration of the equilibrium hydrogen isotopic fractionation factor for CH 4 and hydrogen gas (H 2 ) ( D α CH4(g)–H2(g) ) based on experiments using γ-Al 2 O 3 and Ni catalysts from 3 to 200°C. Results were regressed as a 2 nd order polynomial of 1000 × ln D α CH4(g)–H2(g) vs. 1/T (K -1 ) yielding: 1000 × l n D α C H 4 ( g ) - H 2 ( g ) = 3.5317 × 10 7 T 2 + 2.7749 × 10 5 T - 179.48 We combine this calibration with previous experimental determinations of hydrogen isotope equilibrium between H 2 , H 2 O(g), and H 2 O(l) and we provide an interpolatable experimental calibration of 1000 × ln D α CH4(g)–H2O(l) from 3 to 200°C. Our resulting 4th order polynomial is the following equation: 1000 × l n D α C H 4 ( g ) - H 2 O l = - 7.9443 × 10 12 T 4 + 8.7772 × 10 10 T 3 - 3.4973 × 10 8 T 2 + 5.4398 × 10 5 T - 382.05 At 3°C, the value from our calibration differs by 93‰ relative to what would be calculated based on the extrapolation of the only experimental calibration currently available to temperatures below its calibrated range (lowest temperature of 200°C; Horibe and Craig, 1995). We additionally provide new theoretical estimates of hydrogen isotopic equilibrium between CH 4 (g), H 2 (g), and H 2 O(g) and carbon isotopic equilibrium between CH 4 (g) and CO 2 (g) using Path Integral Monte Carlo (PIMC) calculations. Our PIMC calculations for hydrogen isotopic equilibrium between CH 4 and H 2 agree 1:1 with our experiments. Finally, we compile carbon and hydrogen isotopic measurements of CH 4 , CO 2 , and H 2 O from various environmental systems and compare observed differences between carbon and hydrogen isotopes to those expected based on isotopic equilibrium. We find that isotopic compositions of some microbial gases from marine sedimentary, coalbed, and shale environments are consistent with those expected for CH 4 H 2 O(l) hydrogen and CH 4 CO 2 carbon isotopic equilibrium. In contrast, microbial terrestrial and pure culture gases are not consistent with both CH 4 H 2 O(l) hydrogen and CH 4 CO 2 carbon isotopic equilibrium. Overall, these results are explained qualitatively using previously developed conceptual models that link free energy gradients available to microorganisms to the degree that their enzymes can promote isotope-exchange reactions between CH 4 , CO 2 , and H 2 O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of the enthalpy of adsorption of hydrogen in activated carbon at room temperature

The development of high-performance materials for hydrogen storage by adsorption requires detailed understanding of the adsorbate-adsorbent interactions, e.g., the enthalpy of adsorption ΔH, which measures the interaction strength. The determination of ΔH for a weakly adsorbing gas such as hydrogen in a carbonaceous porous material is difficult experimentally, normally requiring measuring two cryogenic adsorption isotherms. Here we demonstrate a calculation of ΔH based on ca. room temperature adsorption isotherms at 273 K and 296 K using the Clausius-Clapeyron equation. This requires an estimation of the volume of the adsorbed film (~40%, ~12% of the total pore volume at 77 K, 296 K, respectively) obtained from fits of the excess adsorption isotherms to an Ono-Kondo model with the auxiliary use of a fixed point corresponding to the saturation film density (estimated as 100 ± 20 g/L) which appears to be remarkably sample and temperature independent, i.e., a property of the adsorbate. The calculated room temperature enthalpy of adsorption ΔH = 8.3 ± 0.4 kJ/mol is in excellent agreement with the low-coverage cryogenic determination of ΔH. The methodology hereby proposed facilitates reliable calculations of the enthalpy of adsorption at room temperatures for weakly-adsorbing gases.

08 HYDROGEN↗

Parametric optimization of the liquid sampling-atmospheric pressure glow discharge ionization source coupled to an Orbitrap mass spectrometer for neodymium isotope ratio determinations

Isotope ratio determinations are a valuable tool in several application areas. In nuclear forensics, the isotope ratios of uranium and plutonium are commonly used as a signature for the nuclear material's provenance and processing history. However, signatures from other coexisting elements, such as neodymium and samarium, can offer additional insights. Here, the liquid sampling-atmospheric pressure glow discharge (LS-APGD) ionization source coupled to an Orbitrap mass spectrometer (MS) has demonstrated its utility for actinide measurements. This instrumental platform can leverage the high resolution offered by the Orbitrap MS to overcome potential isobaric interferences, such as 144 Nd- 144 Sm, 148 Nd- 148 Sm, and 150 Nd- 150 Sm pairs. The work presented herein demonstrates the rapid, accurate, and precise determination of the isotope ratios for neodymium using the LS-APGD/Orbitrap MS. Both the LS-APGD and Orbitrap MS parameters were optimized systematically, with NdO + found to be the most abundant, most reduced species after applying the optimal collision-induced dissociation modalities. A limit of detection of 3 pg of 142 Nd was achieved when data was acquired and processed using the FTMS Booster, an external data acquisition and processing system offered by Spectroswiss. Excellent accuracy of better than 99 % and precision of <1 % RSD were achieved when a solution of the well-characterized neodymium standard (JNdi-1 standard) was analyzed under the optimized condition, indicating the LS-APGD/Orbitrap's great potential for isotope ratio analysis of Nd and other REEs for diverse applications.

47 OTHER INSTRUMENTATION↗

Determination of permeability for hydrocarbon release due to excavation-induced stress redistribution in rock salt

Due to a stress redistribution after the excavation of an underground tunnel for radioactive waste disposal, an Ed/DZ (excavation disturbed/damaged zone) will be generated in the near field of the opening, resulting in significant changes in the hydraulic and mechanical properties of the rock mass in the zone. Initially more or less randomly distributed hydrocarbons at grain boundaries in rock salt, which sometimes can only be observed with ultraviolet light, can then be mobilised and migrate at a potentially significant rate towards the excavation. Within the international cooperative project DECOVALEX 2019, the migration mechanism of such fluid inclusions in rock salt is being studied intensively. Specifically, a multi-scale modelling strategy has been developed. A macroscale coupled hydro-mechanical modelling of an underground excavation was performed to determine hydraulic and time-dependent deviatoric stress conditions, by taking into account the rock salt creep behaviour. Under the obtained macro-scale constraints, micro-scale modelling of a pathway dilation along halite grain boundaries was performed using different model strategies: a) coupled hydromechanical modelling with a consideration of hydraulic pressure-induced dilatant deformation, b) nonlinear dynamic model taking account of fluid migration, stress-dependent grain boundary wetting and shear-induced dilatancy of salt, and c) phase-field modelling of flow pathway propagation. The permeability increase resulting from the pathway dilation is estimated to be as high as two orders of magnitude. Based on the permeability determined, a series of pressure buildups measured from a borehole with a high hydrocarbon release rate, a total of 430 build-ups within a monitoring time of 938 days, can be simulated with a macro-scale compressible flow model accounting for different zones around the opening.

58 GEOSCIENCES↗

In Vivo Dosimetry Using a Linear Mosfet-Array Dosimeter to Determine the Urethra Dose In {sup 125}I Permanent Prostate Implants

Purpose: In vivo dosimetry during brachytherapy of the prostate with {sup 125}I seeds is challenging because of the high dose gradients and low photon energies involved. We present the results of a study using metal-oxide-semiconductor field-effect transistor (MOSFET) dosimeters to evaluate the dose in the urethra after a permanent prostate implantation procedure. Methods and Materials: Phantom measurements were made to validate the measurement technique, determine the measurement accuracy, and define action levels for clinical measurements. Patient measurements were performed with a MOSFET array in the urinary catheter immediately after the implantation procedure. A CT scan was performed, and dose values, calculated by the treatment planning system, were compared to in vivo dose values measured with MOSFET dosimeters. Results: Corrections for temperature dependence of the MOSFET array response and photon attenuation in the catheter on the in vivo dose values are necessary. The overall uncertainty in the measurement procedure, determined in a simulation experiment, is 8.0% (1 SD). In vivo dose values were obtained for 17 patients. In the high-dose region (> 100 Gy), calculated and measured dose values agreed within 1.7% {+-} 10.7% (1 SD). In the low-dose region outside the prostate (< 100 Gy), larger deviations occurred. Conclusions: MOSFET detectors are suitable for in vivo dosimetry during {sup 125}I brachytherapy of prostate cancer. An action level of {+-} 16% (2 SD) for detection of errors in the implantation procedure is achievable after validation of the detector system and measurement conditions.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Hepatocytes Determine the Hypoxic Microenvironment and Radiosensitivity of Colorectal Cancer Cells Through Production of Nitric Oxide That Targets Mitochondrial Respiration

Purpose: To determine whether host hepatocytes may reverse hypoxic radioresistance through nitric oxide (NO)-induced oxygen sparing, in a model relevant to colorectal cancer (CRC) liver metastases. Methods and Materials: Hepatocytes and a panel of CRC cells were incubated in a tissue-mimetic coculture system with diffusion-limited oxygenation, and oxygen levels were monitored by an oxygen-sensing fluorescence probe. To activate endogenous NO production, cocultures were exposed to a cytokine mixture, and the expression of inducible nitric oxide synthase was analyzed by reverse transcription–polymerase chain reaction, Western blotting, and NO/nitrite production. The mitochondrial targets of NO were examined by enzymatic activity. To assess hypoxic radioresponse, cocultures were irradiated and reseeded for colonies. Results: Resting hepatocytes consumed 10-40 times more oxygen than mouse CT26 and human DLD-1, HT29, HCT116, and SW480 CRC cells, and thus seemed to be the major effectors of hypoxic conditioning. As a result, hepatocytes caused uniform radioprotection of tumor cells at a 1:1 ratio. Conversely, NO-producing hepatocytes radiosensitized all CRC cell lines more than 1.5-fold, similar to the effect of selective mitochondrial inhibitors. The radiosensitizing effect was associated with a respiratory self-arrest of hepatocytes at the level of aconitase and complex II, which resulted in profound reoxygenation of tumor cells through oxygen sparing. Nitric oxide–producing hepatocytes were at least 10 times more active than NO-producing macrophages to reverse hypoxia-induced radioresistance. Conclusions: Hepatocytes were the major determinants of the hypoxic microenvironment and radioresponse of CRC cells in our model of metabolic hypoxia. We provide evidence that reoxygenation and radiosensitization of hypoxic CRC cells can be achieved through oxygen sparing induced by endogenous NO production in host hepatocytes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Thermodynamic properties of Gd-Bi alloys determined by emf measurements in LiCl-KCl-GdCl 3 electrolyte

Thermodynamic properties of binary Gd-Bi alloys (mole fraction, x Gd = 0.02–0.35) were determined using electromotive force (emf) measurements in molten LiCl-KCl-GdCl 3 electrolyte in complement with structural, microstructural, and thermal characterization. X-ray diffractometry (XRD) and scanning electron microscopy (SEM) identified the phase constituents of Gd-Bi alloys (x Gd = 0.02–0.35) as Bi matrix and GdBi compound. According to differential scanning calorimetry (DSC) measurements up to 1250 K, a eutectic transition [L = Bi + GdBi] was observed at 543 K but the reported peritectic transition [L + GdBi = GdBi 2 ] was not detected, suggesting the absence of the GdBi 2 compound. Based on structural, microstructural, and thermal characterization of Gd-Bi alloys (x Gd = 0.02–0.35), the GdBi 2 compound was not detected, and its thermodynamic stability is questionable. The emf of Gd-Bi alloy (x Gd = 0.16) at 700–1048 K relative to Gd(s) was measured by electrodepositing pure Gd metal at 25 K increments. Further, the emf values of Gd-Bi alloys were determined via coulometric titration of Gd into liquid Bi using a two-phase [L + GdBi] alloy as a reference electrode at 773–973 K. The solubility of Gd in liquid Bi was also estimated to be 0.50 mol% (773 K), 0.99 mol% (873 K), and 2.21 mol% (973 K) and the excess partial molar Gibbs energy (Δ$\mathrm{\bar{G}^{ex}_{Gd}}$) of liquid Gd-Bi alloys was as low as 65 kJ mol –1 , indicating strong chemical interactions between Gd and Bi.

36 MATERIALS SCIENCE↗

Mass Spectrometry Guided In Situ Proteolysis to Obtain Crystals for X-ray Structure Determination

A strategy for increasing the efficiency of protein crystallization/structure determination with mass spectrometry has been developed. This approach combines insights from limited proteolysis/mass spectrometry and crystallization via in situ proteolysis. The procedure seeks to identify protease-resistant polypeptide chain segments from purified proteins on the time-scale of crystal formation, and subsequently crystallizing the target protein in the presence of the optimal protease at the right relative concentration. We report our experience with 10 proteins of unknown structure, two of which yielded high-resolution X-ray structures. The advantage of this approach comes from its ability to select only those structure determination candidates that are likely to benefit from application of in situ proteolysis, using conditions most likely to result in formation of a stable proteolytic digestion product suitable for crystallization.

59 BASIC BIOLOGICAL SCIENCES↗