Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIVERSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

The diversity of aluminum-based drinking water treatment residuals for use in environmental remediation

Drinking water treatment residuals (DWTRs) are complex mixtures of organic and inorganic phases generally disposed of as waste materials. However, their strong sorptive properties could be further exploited to immobilize contaminants. To characterize these materials, we applied a range of analytical techniques to a set of aluminum-based DWTRs. Here we determined surface areas, elemental compositions using CHNS analysis and X-ray fluorescence (XRF), performed thermogravimetric analyses paired with mass spectrometry (TGA-MS), and used synchrotron-based methods: X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS). Elemental analyses and specific surface area measurements – that vary between 7.23 ± 0.03 and 197.6 ± 0.9 m 2 g –1 – indicate that non-coagulant additives must play an important role in controlling sorption. High resolution powder XRD reveals the presence of only a few crystalline minerals mostly derived from source waters or additives. Fe was detected by XRF in all samples, whereas Mn was present in significant levels in samples with potassium permanganate as additive. The chemical speciation of these elements was characterized by performing spectral decompositions of XAS spectra. The spectral features of Fe are consistent with iron(III) oxides/hydroxides and structural iron in clays. On the other hand, Mn is predominantly present under its reduced form, Mn(II).

54 ENVIRONMENTAL SCIENCES↗

Demonstrating a butylamine-based deconstruction method for poplar biomass and conversion by diverse microbial strains

Low-boiling alkylamines such as butylamine offer promise as effective biomass pretreatment solvents that can be readily recovered and recycled; however, their capability to support microbial conversion of nutrients present in hydrolysates represents an important area for investigation. Here we employed butylamine to pretreat poplar biomass and characterize its effects on the release of fermentable sugars after solvent removal and enzymatic hydrolysis, as well as the biocompatibility of the produced hydrolysates with three organisms commonly used as bioconversion hosts. We observed that residual butylamine and the derivative butylacetamide were present in high enough concentrations to exert toxicity to strains of Aspergillus niger, Pseudomonas putida, and Rhodosporidium toruloides that produce malic acid, isoprenol and bisabolene, respectively. Removal of the toxic compounds by charcoal filtration and nutrient supplementation resulted in a hydrolysate containing >100 g L −1 of sugars that enabled strong growth, substrate consumption and bioproduct accumulation, outperforming defined cultivation media. This is the first demonstration of a butylamine-based deconstruction process for poplar biomass at a pilot-scale to achieve conversion of high sugar concentrations to valuable bioproducts with engineered microbes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Organo-catalyzed deamination of polystyrene sulfonamide for diverse post-polymerization modification of styrenic polymers

Post-polymerization modification allows for the incorporation of functional groups that would otherwise be incompatible with polymerization conditions, enhancing synthetic efficiency and facilitating the creation of complex polymer architectures for specialized applications, such as biomedical devices, electronics, and advanced coatings. Herein, we report a method inspired by late-stage functionalization of small molecules for the post-polymerization modification of aromatic polymers, specifically polystyrene (PS), under mild reaction conditions. First, PS was converted to polystyrene sulfonamide (PSSNH 2 ) with an 85% yield using established procedures. PSSNH 2 was subsequently transformed into a reactive sulfinate by deamination using an N-heterocyclic carbene (NHC) catalyst and benzaldehyde. The catalytic process was optimized by varying catalysts, solvents, bases, temperatures, and reaction times. The highest degree of deamination was 88% with a bicyclic NHC and K 2 CO 3 base in DMSO for 18 hours at 120 °C. The reactive sulfinate was then treated with various functional reagents, resulting in a library of aromatic polymers with different substituents with high degrees of functionalization ranging from 74% to 98%. Similarly, we modified expanded PS waste with trifluorobutyl iodide with a degree of functionalization of 72%, highlighting a new avenue for plastic upgrading. This approach could be used to rapidly generate functionalized polymers from PS with potential applications, including antibacterial properties and flame retardancy.

Shrestha, Tulaja [Univ. of Delaware, Newark, DE (U↗

How can a diverse set of integral and semi-integral measurements inform identification of discrepant nuclear data?

Nuclear data are used for a variety of applications, including criticality safety, reactor performance, and material safeguards. Despite the breadth of use-cases, the effective neutron multiplication factor, keff, of ICSBEP critical assemblies are primarily used for nuclear data validation; these are sensitive to specific energy regions and nuclides and are unable to uniquely constrain nuclear data. As a consequence, general-purpose nuclear data libraries, such as ENDF/B-VIII.0, may have deficiencies that, while not apparent in criticality applications, negatively impact other applications, such as non-destructive analysis of special nuclear material and neutron diagnosed subcritical experiments. Recent work by the Experiments Underpinned by Computational Learning for Improvements in Nuclear Data (EUCLID) project developed a machine learning tool, RAFIEKI, which uses random forests and the SHAP metric to determine which nuclear data contribute most to predicted bias between measured and simulated responses (e.g. keff). This paper contrasts RAFIEKI analysis applied to keff only against RAFIEKI analysis with keff paired with either LLNL pulsed sphere measurements or subcritical benchmarks. Two examples show that a) including pulsed sphere measurements substantially increases 9Be nuclear data importance to bias between 2 and 15 MeV, and b) including subcritical benchmarks has the potential for disentangling compensating errors between 240Pu (n,el) and (n,il) cross-sections between 0.1 and 10 MeV. These results show that RAFIEKI analysis applied to response sets that include, but go beyond, keff can aid nuclear data evaluators in identifying issues in nuclear data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Role of Assay Type in Determining Free 25-Hydroxyvitamin D Levels in Diverse Populations

Serum 25-hydroxyvitamin D (25OHD) is the most frequently used marker of vitamin D status. Low 25OHD is associated with bone loss, fractures {Cauley, 2010 #1516;Ensrud, 2009 #1517}, and other adverse health outcomes {Theodoratou, 2014 #1518}. Most extra renal tissues only have access to free 25OHD, and free 25OHD concentration is thus a plausible biomarker of 25OHD availability and function {Johnsen, 2014 #1443;Chun, 2014 #1343}. Stronger associations with free or bioavailable 25OHD than with total 25OHD were reported for serum calcium, parathyroid hormone (PTH) {Bhan, 2012 #1124} and bone mineral density (BMD) {Powe, 2011 #1129}. These findings have led to the suggestion that free or bioavailable 25OHD may provide a more clinically relevant measure of tissue 25OHD availability and vitamin D status {Powe, 2013 #1369; Holick NEJM 2013 editorial}. The US Preventive Services Task Force (LeFevre 2015) recently pointed to the gap in research regarding bioavailable and free 25OHD and noted the possibility that these may be better markers of tissue 25OHD availability. Free 25OHD is conventionally calculated from the concentrations of total 25OHD, vitamin D binding protein (DBP) and albumin, with or without a factor accounting for DBP genotype-specific binding affinities {Bouillon, 1981 #1207;Chun, 2012 #1143; Powe, 2011 #1129;Johnsen, 2014 #1443}. DBP—or Group specific component (GC) {Hirschfeld, 1959 #1468}—polymorphisms (rs4588 and rs7041) give rise to three major polymorphic isoforms of DBP, GC-1F, GC-1S and GC-2, the frequencies of which differ globally, with GC-1F alleles more common in populations of African descent {Kambou, 1986 #1122}. Although DBP is a primary component of free and bioavailable 25OHD calculations, substantial variation in DBP between assays has been noted (Powe suggest to cite here previous publications as in previous version of this Ms). Using DBP measured by a monoclonal antibody Powe et al. {Powe, 2013 #1369} concluded that calculated free 25OHD in African-Americans was equal or higher than in US whites, questioning the implications of low total 25OHD concentrations in African Americans (Holick 2013). This idea gained widespread attention in medical and lay press {LeFevre, 2015 #1598; Bhan, 2014 #1485; Durazo-Arvizu, 2014 #1519}, and many others) and may have important implications for nutrional supplementation policy. To better understand the importance of free 25OHD estimates, and its racial differences, we conducted studies in cohorts based in the US, UK and The Gambia that included participants of African and European ancestry known to differ in GC genotype distribution. We characterized the molecular forms of circulating DBP through comparison of several DBP assays and DBP peptide proteomic analysis, to obtain both calculated and directly measured free 25OHD by geographical region, race and GC genotype.

Environmental Molecular Sciences Laboratory↗

Diversity of hydrogen configuration and its roles in SrTiO{sub 3−δ}

As a source of carrier electron, various configurations of hydrogen in SrTiO{sub 3} are searched by using first-principles calculations. The most stable form of hydrogen is found to be H{sup −}, where doubly charged oxygen vacancy V{sub O}{sup 2+} changes into singly charged H{sub O}{sup +}. Most importantly, an additional H{sup −} is found to be weakly trapped by H{sub O}{sup +}, which completely neutralizes carrier electrons by forming (2H){sub O}{sup 0}. These unexpected behaviors of hydrogen, which can explain reported experimental results, expand the role of the hydrogen in carrier-control technology in transition-metal oxides.

36 MATERIALS SCIENCE↗

Diverse and tunable electronic structures of single-layer metal phosphorus trichalcogenides for photocatalytic water splitting

The family of bulk metal phosphorus trichalcogenides (APX{sub 3}, A = M{sup II}, M{sub 0.5}{sup I}M{sub 0.5}{sup III}; X = S, Se; M{sup I}, M{sup II}, and M{sup III} represent Group-I, Group-II, and Group-III metals, respectively) has attracted great attentions because such materials not only own magnetic and ferroelectric properties, but also exhibit excellent properties in hydrogen storage and lithium battery because of the layered structures. Many layered materials have been exfoliated into two-dimensional (2D) materials, and they show distinct electronic properties compared with their bulks. Here we present a systematical study of single-layer metal phosphorus trichalcogenides by density functional theory calculations. The results show that the single layer metal phosphorus trichalcogenides have very low formation energies, which indicates that the exfoliation of single layer APX{sub 3} should not be difficult. The family of single layer metal phosphorus trichalcogenides exhibits a large range of band gaps from 1.77 to 3.94 eV, and the electronic structures are greatly affected by the metal or the chalcogenide atoms. The calculated band edges of metal phosphorus trichalcogenides further reveal that single-layer ZnPSe{sub 3}, CdPSe{sub 3}, Ag{sub 0.5}Sc{sub 0.5}PSe{sub 3}, and Ag{sub 0.5}In{sub 0.5}PX{sub 3} (X = S and Se) have both suitable band gaps for visible-light driving and sufficient over-potentials for water splitting. More fascinatingly, single-layer Ag{sub 0.5}Sc{sub 0.5}PSe{sub 3} is a direct band gap semiconductor, and the calculated optical absorption further convinces that such materials own outstanding properties for light absorption. Such results demonstrate that the single layer metal phosphorus trichalcogenides own high stability, versatile electronic properties, and high optical absorption, thus such materials have great chances to be high efficient photocatalysts for water-splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The structural diversity of ABS{sub 3} compounds with d{sup 0} electronic configuration for the B-cation

We use first-principles density functional theory within the local density approximation to ascertain the ground state structure of real and theoretical compounds with the formula ABS{sub 3} (A = K, Rb, Cs, Ca, Sr, Ba, Tl, Sn, Pb, and Bi; and B = Sc, Y, Ti, Zr, V, and Nb) under the constraint that B must have a d{sup 0} electronic configuration. Our findings indicate that none of these AB combinations prefer a perovskite ground state with corner-sharing BS{sub 6} octahedra, but that they prefer phases with either edge- or face-sharing motifs. Further, a simple two-dimensional structure field map created from A and B ionic radii provides a neat demarcation between combinations preferring face-sharing versus edge-sharing phases for most of these combinations. We then show that by modifying the common Goldschmidt tolerance factor with a multiplicative term based on the electronegativity difference between A and S, the demarcation between predicted edge-sharing and face-sharing ground state phases is enhanced. We also demonstrate that, by calculating the free energy contribution of phonons, some of these compounds may assume multiple phases as synthesis temperatures are altered, or as ambient temperatures rise or fall.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superconductivity and superfluidity as universal emergent phenomena in diverse physical systems

Superconductivity and superfluidity are observed across a strikingly broad range of physical systems. This universality seems unlikely to be coincidental but a unified understanding of superconductivity and superfluidity across these highly disparate fields seems impossible in traditional microscopic terms. I give an overview of superconductivity and superfluidity found in various fermionic condensed matter, nuclear physics, and neutron star systems, and propose that all result from generic algebraic structures for the emergent effective Hamiltonian, with the role of underlying microscopic physics largely relegated to influence on parameter values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Repetitive formation and decay of current sheets in magnetic loops: An origin of diverse magnetic structures

In this work, evolution of an incompressible, thermally homogeneous, infinitely conducting, viscous magnetofluid is numerically explored as the fluid undergoes repeated events of magnetic reconnection. The initial magnetic field is constructed by a superposition of two linear force-free fields and has similar morphology as the magnetic loops observed in the solar corona. The results are presented for computations with three distinct sets of footpoint geometries. To onset reconnection, we rely on numerical model magnetic diffusivity, in the spirit of implicit large eddy simulation. It is generally expected that in a high Lundquist number fluid, repeated magnetic reconnections are ubiquitous and hence can lead to a host of magnetic structures with considerable observational importance. In particular, the simulations presented here illustrate formations of magnetic islands, rotating magnetic helices and rising flux ropes—depending on the initial footpoint geometry but through the common process of repeated magnetic reconnections. Further, we observe the development of extended current sheets in two case studies, where the footpoint reconnections generate favorable dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diversity of electronic transitions and photoluminescence properties of p-type cuprous oxide films: A temperature-dependent spectral transmittance study

Cuprous oxide films have been deposited on quartz substrates by a sol-gel method under various annealing temperatures. The X-ray diffraction analysis and Raman scattering show that all the films are of pure Cu{sub 2}O phase. From comparison of photoluminescence with 488 and 325 nm laser excitations, the electronic transition energies and intensities present the annealing-temperature dependent behavior. The electronic band structures of the Cu{sub 2}O film annealed at 800 °C, especially for the contribution of exciton series and high energy transitions, have been investigated by temperature dependent transmittance. The extracted refraction index and the high frequency dielectric constant both abruptly decrease until the temperature rises up to 100 K. Six transitions can be clearly identified and the red shift trend of E{sub o3}-E{sub o5} transition energies with increasing the temperature can be found. Moreover, the anomalous behavior takes place at about 200 K from the E{sub o6} transition. The singularities indicate that the change in the crystalline and electronic band structure occurs as the temperature near 100 K and 200 K for the film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strictly monolayer large continuous MoS{sub 2} films on diverse substrates and their luminescence properties

Despite a tremendous interest on molybdenum disulfide as a thinnest direct band gap semiconductor, single step synthesis of a large area purely monolayer MoS{sub 2} film has not yet been reported. Here, we report a CVD route to synthesize a continuous film of strictly monolayer MoS{sub 2} covering an area as large as a few cm{sup 2} on a variety of different substrates without using any seeding material or any elaborate pretreatment of the substrate. This is achieved by allowing the growth to take place in the naturally formed gap between a piece of SiO{sub 2} coated Si wafer and the substrate, when the latter is placed on top of the former inside a CVD reactor. We propose a qualitative model to explain why the MoS{sub 2} films are always strictly monolayer in this method. The photoluminescence study of these monolayers shows the characteristic excitonic and trionic features associated with monolayer MoS{sub 2}. In addition, a broad defect related luminescence band appears at ∼1.7 eV. As temperature decreases, the intensity of this broad feature increases, while the band edge luminescence reduces.

36 MATERIALS SCIENCE↗

Diverse wave-particle interactions for energetic ions that traverse Alfvén eigenmodes on their first full orbit

Neutral-beam ions that are deflected onto loss orbits by Alfvén eigenmodes (AE) on their first bounce orbit and are detected by a fast-ion loss detector (FILD) satisfy the “local resonance” condition proposed by Zhang et al. [Nucl. Fusion 55, 22002 (2015)]. This theory qualitatively explains FILD observations for a wide variety of AE-particle interactions. When coherent losses are measured for multiple AE, oscillations at the sum and difference frequencies of the independent modes are often observed in the loss signal. The amplitudes of the sum and difference peaks correlate weakly with the amplitudes of the fundamental loss-signal amplitudes but do not correlate with the measured mode amplitudes. In contrast to a simple uniform-plasma theory of the interaction [Chen et al., Nucl. Fusion 54, 083005 (2014)], the loss-signal amplitude at the sum frequency is often larger than the loss-signal amplitude at the difference frequency, indicating a more detailed computation of the orbital trajectories through the mode eigenfunctions is needed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Can a deep-learning model make fast predictions of vacancy formation in diverse materials?

The presence of point defects, such as vacancies, plays an important role in materials design. Here, we explore the extrapolative power of a graph neural network (GNN) to predict vacancy formation energies. We show that a model trained only on perfect materials can also be used to predict vacancy formation energies (E vac ) of defect structures without the need for additional training data. Such GNN-based predictions are considerably faster than density functional theory (DFT) calculations and show potential as a quick pre-screening tool for defect systems. To test this strategy, we developed a DFT dataset of 530 E vac consisting of 3D elemental solids, alloys, oxides, semiconductors, and 2D monolayer materials. We analyzed and discussed the applicability of such direct and fast predictions. We applied the model to predict 192 494 E vac for 55 723 materials in the JARVIS-DFT database. Our work demonstrates how a GNN-model performs on unseen data.

2D materials↗