Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Criticality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Neutronics for critical fission reactors and subcritical fission in hybrids

The requirements of future innovative nuclear fuel cycles will focus on safety, sustainability and radioactive waste minimization. Critical fast neutron reactors and sub-critical, external source driven systems (accelerator driven and fusion-fission hybrids) have a potential role to meet these requirements in view of their physics characteristics. This paper provides a short introduction to these features.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Electromagnetic waves destabilized by runaway electrons in near-critical electric fields

Runaway electron distributions are strongly anisotropic in velocity space. This anisotropy is a source of free energy that may destabilize electromagnetic waves through a resonant interaction between the waves and the energetic electrons. In this work, we investigate the high-frequency electromagnetic waves that are destabilized by runaway electron beams when the electric field is close to the critical field for runaway acceleration. Using a runaway electron distribution appropriate for the near-critical case, we calculate the linear instability growth rate of these waves and conclude that the obliquely propagating whistler waves are most unstable. We show that the frequencies, wave numbers, and propagation angles of the most unstable waves depend strongly on the magnetic field. Taking into account collisional and convective damping of the waves, we determine the number density of runaways that is required to destabilize the waves and show its parametric dependences.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Critical field of two-dimensional superconducting Sn{sub 1-x}/Si{sub x} bimetallic composite cluster assembled films with energetic cluster impact deposition

Sn{sub 1-x}/Si{sub x} cluster assembled films have been prepared by an energetic cluster impact deposition using a plasma-gas-condensation cluster beam deposition apparatus. Transmission electron microscope images indicated that individual clusters have composite morphologies, where Sn and Si were separated from each other. The superconducting critical magnetic fields, H{sub c}, of Sn{sub 1-x}/Si{sub x} cluster assembled films were measured and found to be much higher than the critical magnetic field of the bulk Sn. We estimated the H{sub c} values by using a theory of the superconducting thin film. The estimated values are in good agreement with the experiments, indicating that the Sn{sub 1-x}/Si{sub x} cluster assembled films can be regarded as a two-dimensional system although thickness, t, of Sn{sub 1-x}/Si{sub x} cluster assembled films (t Almost-Equal-To 1000 nm) is thicker than conventional superconducting thin film (t < 100 nm).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dipolar field effects on the critical current for spin transfer switch of iron and permalloy nanoelements

We report a theoretical study of dipolar effects on the switching current density of soft ferromagnetic elliptical nanoelements. Relevant changes on the critical current value are found according to the orientation of the magnetization and the spin polarization with the major axis. We show that the critical current density may be reduced by as much as 92% for thin nanoelements magnetized along the minor axis direction, using in-plane spin polarization parallel to the magnetization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electromigration kinetics and critical current of Pb-free interconnects

Electromigration kinetics of Pb-free solder bump interconnects have been studied using a single bump parameter sweep technique. By removing bump to bump variations in structure, texture, and composition, the single bump sweep technique has provided both activation energy and power exponents that reflect atomic migration and interface reactions with fewer samples, shorter stress time, and better statistics than standard failure testing procedures. Contact metallurgies based on Cu and Ni have been studied. Critical current, which corresponds to the Blech limit, was found to exist in the Ni metallurgy, but not in the Cu metallurgy. A temperature dependence of critical current was also observed.

36 MATERIALS SCIENCE↗

Critical magnetic fields of superconducting aluminum-substituted Ba{sub 8}Si{sub 42}Al{sub 4} clathrate

In recent years, efforts have been made to explore the superconductivity of clathrates containing crystalline frameworks of group-IV elements. The superconducting silicon clathrate is unusual in that the structure is dominated by strong sp{sup 3} covalent bonds between silicon atoms, rather than the metallic bonding that is more typical of traditional superconductors. This paper reports on critical magnetic fields of superconducting Al-substituted silicon clathrates, which were investigated by transport, ac susceptibility, and dc magnetization measurements in magnetic fields up to 90 kOe. For the sample Ba{sub 8}Si{sub 42}Al{sub 4}, the critical magnetic fields were measured to be H{sub C1} = 40.2 Oe and H{sub C2} = 66.4 kOe. The London penetration depth of 4360 Å and the coherence length 70 Å were obtained, whereas the estimated Ginzburg–Landau parameter of κ = 62 revealed that Ba{sub 8}Si{sub 42}Al{sub 4} is a strong type-II superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High pressure driven superconducting critical temperature tuning in Sb{sub 2}Se{sub 3} topological insulator

In this letter, we are reporting the change of superconducting critical temperature in Sb{sub 2}Se{sub 3} topological insulator under the influence of an external hydrostatic pressure based on first principles electronic structure calculations coupled with Migdal–Eliashberg model. Experimentally, it was shown previously that Sb{sub 2}Se{sub 3} was undergoing through a transition to a superconducting phase when subjected to a compressive pressure. Our results show that the critical temperature increases up to 6.15 K under the pressure unto 40 GPa and, subsequently, drops down until 70 GPa. Throughout this pressure range, the system is preserving the initial Pnma symmetry without any structural transformation. Our results suggest that the possible relevant mechanism behind the superconductivity in Sb{sub 2}Se{sub 3} is primarily the electron–phonon coupling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magneto-acoustic study near the quantum critical point of the frustrated quantum antiferromagnet Cs{sub 2}CuCl{sub 4}

Magneto-acoustic investigations of the frustrated triangular-lattice antiferromagnet Cs{sub 2}CuCl{sub 4} were performed for the longitudinal modes c{sub 11} and c{sub 33} in magnetic fields along the a-axis. The temperature dependence of the sound velocity at zero field shows a mild softening at low temperature and displays a small kink-like anomaly at T{sub N}. Isothermal measurements at T < T{sub N} of the sound attenuation α reveal two closely spaced features of different characters on approaching the material's quantum-critical point (QCP) at B{sub s} ≈ 8.5 T for B || a. The peak at slightly lower fields remains sharp down to the lowest temperature and can be attributed to the ordering temperature T{sub N}(B). The second anomaly, which is rounded and which becomes reduced in size upon cooling, is assigned to the material's spin-liquid properties preceding the long-range antiferromagnetic ordering with decreasing temperature. These two features merge upon cooling suggesting a coincidence at the QCP. The elastic constant at lowest temperatures of our experiment at 32 mK can be well described by a Landau free energy model with a very small magnetoelastic coupling constant G/k{sub B} ≈ 2.8 K. The applicability of this classical model indicates the existence of a small gap in the magnetic excitation spectrum which drives the system away from quantum criticality.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Signatures of Cooper pair dynamics and quantum-critical superconductivity in tunable carrier bands

Different superconducting pairing mechanisms are markedly distinct in the underlying Cooper pair kinematics. Quantum-critical soft modes drive pairing interactions in which the pair scattering processes are highly collinear and can be classified into two categories: forward scattering and backscattering. Conversely, in conventional phonon mechanisms, Cooper pair scattering is of a generic noncollinear character. In this study, we present a method to discern the kinematic type by observing the evolution of superconductivity while adjusting the Fermi surface geometry. To demonstrate our approach, we utilize the recently reported phase diagrams of untwisted graphene multilayers. Our analysis connects the emergence of superconductivity at “ghost crossings” of Fermi surfaces in distinct valleys to the pair kinematics of a backscattering type. Together with the observed nonmonotonic behavior of superconductivity near its onset (sharp rise followed by a drop), it lends strong support to a particular quantum-critical superconductivity scenario in which pairing is driven by intervalley coherence fluctuations. These findings offer direct insights into the genesis of pairing in these systems, providing compelling evidence for the electron–electron interactions driving superconductivity. More broadly, our work highlights the potential of tuning bands via ghost crossings as a promising means of boosting superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of the Pool Critical Assembly Benchmark with Explicitly-Modeled Geometry using MCNP6

Despite being one of the most widely used benchmarks for qualifying light water reactor (LWR) radiation transport methods and data, no benchmark calculation of the Oak Ridge National Laboratory (ORNL) Pool Critical Assembly (PCA) pressure vessel wall benchmark facility (PVWBF) using MCNP6 with explicitly modeled core geometry exists. As such, this paper provides results for such an analysis. First, a criticality calculation is used to construct the fixed source term. Next, ADVANTG-generated variance reduction parameters are used within the final MCNP6 fixed source calculations. These calculations provide unadjusted dosimetry results using three sets of dosimetry reaction cross sections of varying ages (those packaged with MCNP6, from the IRDF-2002 multi-group library, and from the ACE-formatted IRDFF v1.05 library). These results are then compared to two different sets of measured reaction rates. The comparison agrees in an overall sense within 2% and on a specific reaction- and dosimetry location-basis within 5%. Except for the neptunium dosimetry, the individual foil raw calculation-to-experiment comparisons usually agree within 10% but is typically greater than unity. Finally, in the course of developing these calculations, geometry that has previously not been completely specified is provided herein for the convenience of future analysts.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Kilopower Reactor Using Stirling TechnologY (KRUSTY) Component Critical Experiments

A series of critical experiments were conducted at the National Criticality Experiments Research Center (NCERC) in Nevada to evaluate the operational performance of a compact reactor that eventually will resemble the flight unit the National Aeronautics and Space Administration will use for deep space exploration. The results from the experiments are compared to preliminary results from computational models using MCNP and ENDF/B-7.1 neutron cross-section data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Critical Assemblies: Dragon Burst Assembly and Solution Assemblies

This work reviews the historical literature associated with the Dragon experiment and water boiler reactors operated at Los Alamos during the Manhattan Project. Frisch’s invited talk given at the American Nuclear Society’s Fast Burst Reactor Conference held at the University of New Mexico in Albuquerque, New Mexico, in 1969 is quoted. From the literature review, basic models for the Dragon experiment and for a water boiler–type assembly (aqueous homogeneous reactor) were created that can be used for conducting multiphysics simulations for criticality excursion studies. This methodology utilizes the coupled neutronic-hydrodynamic method to perform a time-dependent dynamic simulation of a criticality excursion. MCNP® was utilized to calculate important nuclear kinetic parameters that were incorporated into the models. Simulation results compare reasonably well with historic data.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Deimos: HALEU TRISO Heated Critical Experiment Data

Deimos was the first critical experiment using high-assay low-enriched uranium (HALEU) TRistructural ISOtropic (TRISO) fuel in over 40 years. HALEU TRISO is the desired fuel form for many of the advanced reactor designs in development; however, very little experimental data are available for this fuel type. Deimos was designed to utilize existing HALEU TRISO fuel in a large graphite moderator to obtain nuclear and reactor physics data to fill the gaps surrounding this fuel type and enrichment. In addition to cold critical data, three separate heated experiments were conducted to measure the temperature reactivity coefficient for this type of system. These measured coefficients were then compared to simulated coefficients to a first level order of fidelity. This comparison showed very good agreement for the experiment where only the inner core was heated and good agreement for the other two configurations, which included heating portions of the outer core. Less agreement when the outer core was heated is attributed to potential heating in the beryllium reflector, which has a positive temperature reactivity coefficient and was unaccounted for in the first-order models. Future heated experiments with Deimos will include temperature monitoring of the beryllium reflector to account for beryllium heating in the simulations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Magnetic field-induced Fermi surface reconstruction and quantum criticality in CeRhIn 5

Here, we present detailed results of the field evolution of the de Haas–van Alphen (dHvA) effect in CeRhIn 5 . A magnetic field-induced reconstruction of the Fermi surface is clearly shown to occur inside the antiferromagnetic state, in an applied field of around B* ≃ 30 T, which is evidenced by the appearance of several new dHvA branches. The angular dependence of the dHvA frequencies reveals that the Fermi surfaces of CeRhIn 5 at B > B* and CeCoIn 5 are similar. The results suggest that the Ce-4f electrons in become itinerant at B > B* due to the Kondo effect, prior to the field-induced quantum critical point (QCP) at B c0 ≃ 50 T. The electronic states at the field-induced QCP are therefore different from that of the pressure-induced QCP where a dramatic Fermi surface reconstruction occurs exactly at the critical pressure, indicating that multiple types of QCP may exist in CeRhIn 5 .

36 MATERIALS SCIENCE↗

Spontaneous initiation of detonations in while dwarf environments: Determination of critical sizes.

Some explosion models for Type Ia supernovae (SNe Ia), such as the gravitationally confined detonation (GCD) or the double detonation sub-Chandrasekhar (DDSC) models, rely on the spontaneous initiation of a detonation in the degenerate {sup 12}C/{sup 16}O material of a white dwarf (WD). The length scales pertinent to the initiation of the detonation are notoriously unresolved in multidimensional stellar simulations, prompting the use of results of one-dimensional simulations at higher resolution, such as those performed for this work, as guidelines for deciding whether or not conditions reached in the higher dimensional full star simulations successfully would lead to the onset of a detonation. Spontaneous initiation relies on the existence of a suitable gradient in self-ignition (induction) times of the fuel, which we set up with a spatially localized nonuniformity of temperature - a hot spot. We determine the critical (smallest) sizes of such hot spots that still marginally result in a detonation in WD matter by integrating the reactive Euler equations with the hydrodynamics code FLASH. We quantify the dependences of the critical sizes of such hot spots on composition, background temperature, peak temperature, geometry, and functional form of the temperature disturbance, many of which were hitherto largely unexplored in the literature. We discuss the implications of our results in the context of modeling of SNe Ia.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SPONTANEOUS INITIATION OF DETONATIONS IN WHITE DWARF ENVIRONMENTS: DETERMINATION OF CRITICAL SIZES

Some explosion models for Type Ia supernovae (SNe Ia), such as the gravitationally confined detonation (GCD) or the double detonation sub-Chandrasekhar (DDSC) models, rely on the spontaneous initiation of a detonation in the degenerate {sup 12}C/{sup 16}O material of a white dwarf (WD). The length scales pertinent to the initiation of the detonation are notoriously unresolved in multidimensional stellar simulations, prompting the use of results of one-dimensional simulations at higher resolution, such as those performed for this work, as guidelines for deciding whether or not conditions reached in the higher dimensional full star simulations successfully would lead to the onset of a detonation. Spontaneous initiation relies on the existence of a suitable gradient in self-ignition (induction) times of the fuel, which we set up with a spatially localized nonuniformity of temperature-a hot spot. We determine the critical (smallest) sizes of such hot spots that still marginally result in a detonation in WD matter by integrating the reactive Euler equations with the hydrodynamics code FLASH. We quantify the dependences of the critical sizes of such hot spots on composition, background temperature, peak temperature, geometry, and functional form of the temperature disturbance, many of which were hitherto largely unexplored in the literature. We discuss the implications of our results in the context of modeling of SNe Ia.

79 ASTRONOMY AND ASTROPHYSICS↗

Anisotropic upper critical magnetic fields in Rb 2 Cr 3 As 3 superconductor

Rb 2 Cr 3 As 3 is a structurally one-dimensional superconductor containing Cr 3 As 3 chains with a superconducting transition temperature of $T_{\rm c}= 4.8$ K. Here we report the electrical resistance measurements for Rb 2 Cr 3 As 3 single crystals, under magnetic fields up to 29.5 T and at temperatures down to 0.36 K, from which the upper critical fields, $H_{{\rm c2}}(T)$ , can be obtained in a broad temperature range. For field parallel to the Cr 3 As 3 chains, $H_{{\rm c2}}^{\Vert }(T)$ is paramagnetically limited with an initial slope of $\mu_{0}$ d$H_{{\rm c2}}^{\Vert }$ /d$T\vert _{T_{{\rm c}}}=-16$ T ${\rm K}^{-1}$ and a zero-temperature upper critical field of $\mu_{0}H_{{\rm c2}}^{\Vert }(0)= 17.5$ T. For field perpendicular to the Cr 3 As 3 chains, however, $H_{{\rm c2}}^{\bot}(T)$ is only limited by orbital pair-breaking effect with $\mu_{0}$ d$H_{{\rm c2}}^{\perp}$ /d$T\vert _{T_{{\rm c}}}=-3$ T ${\rm K}^{-1}$ . As a consequence, the anisotropy $\gamma_{H}=H_{{\rm c2}}^{\Vert }/H_{{\rm c2}}^{\bot}$ decreases sharply near T c and reverses below 2 K. Furthermore, the low-temperature $H_{{\rm c2}}^{\bot}(T)$ down to 0.075 $T_{{\rm c}}$ remains to increase linearly up to over three times the Pauli paramagnetic limit, which strongly suggests dominant spin-triplet superconductivity in Rb 2 Cr 3 As 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ternary Nb 3 Sn superconductors with artificial pinning centers and high upper critical fields

In this letter we demonstrate the development of ternary Nb3Sn multifilamentary conductors with artificial pinning centers (APC) which achieve high critical fields. These recently-developed conductors were tested in a 31 T magnet, and the results showed that their upper critical field ( B c2 ) values at 4.2 K are 27-28 T, and irreversible field ( B irr ) values are above 26 T, values similar to or higher than those of best RRP conductors. The non-Cu J c has been brought to nearly 1200 A/mm –2 at 16 T and 4.2 K, comparable to RRP, in spite of the fact that the fine-grain Nb 3 Sn fractions in filaments are still low (20-30%) and the grain sizes are still not fully refined (70-80 nm) due to conductor designs and heat treatments that are not yet optimized. The Nb 3 Sn layer J c at 4.2 K, 16 T is 4710 A/mm –2 for the APC wire with 1% Zr, about 2.5 times higher than RRP conductors, in spite of the fact that its grain size is not yet fully refined due to insufficient oxygen and unoptimized heat treatment. An analysis is presented about the non-Cu J c that can be achieved by further optimizing the APC conductors and their heat treatments.

43 PARTICLE ACCELERATORS↗