Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

The conductance of auroral magnetic field lines

DE-1 high-resolution double-probe electric-field data and simultaneous magnetic-field measurements are reported for two 1981 events with large electric fields which reversed over short distances. The data are presented graphically and analyzed in detail. A field-line conductance of about 1 nmho/sq m is determined for both upward and downward currents, and the ionospheric conductivity is shown, in the short-wavelength limit, to have little effect on the relationship between the (N-S) electric and (E-W) magnetic fields above the potential drop parallel to the magnetic-field lines. The results are found to be consistent with a linear relationship between the field-aligned current density and the parallel potential drop.

Weimer, D. R.↗
NASA NTRS1987

High-resolution thermal-conductivity measurements near the lambda point of helium

Measurements of the thermal conductivity of helium in the region from 6 x 10 to the -8th to 6 x 10 to the -4th K above the lambda point at the vapor pressure are reported. Within 5 x 10 to the -6th K of the transition conductivity values are found significantly lower than expected on the basis of theoretical extrapolations from previous experiments. When the parameter Rk is calculated, a maximum about 2 x 10 to the -6th K above the transition is found, in disagreement with the predictions of the two-loop dynamic renormalization-group theory. The uncertainties in the results in this region are discussed in detail.

Lipa, J. A.↗
NASA NTRS1986

Electrically conductive, black thermal control coatings for space craft application. II - Silicone matrix formulation

Five black electrically conductive thermal-control coatings have been formulated and tested for application on the Galileo spacecraft. The coatings consisted of organic and inorganic systems applied on titanium and aluminum surfaces. The coatings were tested under simulated space environment conditions. Coated specimens were subjected to thermal radiation and convective and conductive heating from -196 to 538 C. Mechanical, physical, thermal, electrical, and optical characteristics, formulation, mixing, application, surface preparation of substrates, and a method of determining electrical resistance are presented for the silicone matrix formulation designated as GF-580.

Hribar, V. F.↗
NASA NTRS1988

Electrically Conducting Polymer-Copper Sulphide Composite Films, Preparation by Treatment of Polymer-Copper (2) Acetate Composites with Hydrogen Sulfide

Polymer copper sulfide composite films were prepared by treatment of polymer poly(vinyl chloride), poly(acrylonitrile), copolymer of vinyl chloride and vinyl acetate (90:10), and ABS resin copper (2) acetate composites with hydrogen sulfide. The films showed electrical conductivity higher than 0.015 S/cm when they contained more than 20 wt percent of copper sulfide. A poly(acrylonitrile)-copper sulfide composite film containing 40 to 50 wt percent of copper sulfide showed electrical conductivity of 10 to 150.0 S/cm and had relatively high mechanical strength to be used in practical purposes.

Yamamoto, Takakazu↗
NASA NTRS1988

Hybrid transfinite element modeling/analysis of nonlinear heat conduction problems involving phase change

The present paper describes the applicability of hybrid transfinite element modeling/analysis formulations for nonlinear heat conduction problems involving phase change. The methodology is based on application of transform approaches and classical Galerkin schemes with finite element formulations to maintain the modeling versatility and numerical features for computational analysis. In addition, in conjunction with the above, the effects due to latent heat are modeled using enthalpy formulations to enable a physically realistic approximation to be dealt computationally for materials exhibiting phase change within a narrow band of temperatures. Pertinent details of the approach and computational scheme adapted are described in technical detail. Numerical test cases of comparative nature are presented to demonstrate the applicability of the proposed formulations for numerical modeling/analysis of nonlinear heat conduction problems involving phase change.

Tamma, Kumar K.↗
NASA NTRS1988

Thermal contact conductance of pressurized surfaces

Thermal vacuum testing has demonstrated the feasibility of the concept of pressurizing contact surfaces for the transfer of waste heat on the Space Station. Data show a thin inflatable bladder design to provide a greater contact conductance than an expandable bellows approach, with substantially less interface volume to transfer the same amount of heat. Extended vacuum testing of the Radiator-to-Thermal Bus assembly indicated a continual increase of conductance as the interface was maintained at 150 psi for a 100-hour period.

Voss, Fred E.↗
NASA NTRS1987

Predictions of the electrical conductivity and charging of the aerosols in Titan's atmosphere

Computational results are given for Titan atmosphere aerosol electrical conductivity and charge at altitudes up to 400 km, together with a consideration of ionization from such sources as galactic cosmic rays and electron precipitation from the Saturnian magnetosphere. Predicted conductivity shows the existence of substantial electron concentrations up to the Titan surface. At altitudes of more than 100 km, and aerosol concentrations greater than 10/cu cm, electron/positive ion-recombination is found to be controlled by the recombination of the aerosols' surfaces rather than by the gas-kinetic recombination rate.

Borucki, W. J.↗
NASA NTRS1988

A variable conductance gas switch for intermediate temperature operation of liquid He/liquid N2 cryostats

A technique for establishing a stable intermediate temperature stage in liquid He/liquid N2 double vessel cryostats is described. The tertiary cold stage, which can be tuned to any temperature between 10 and 60 K, is ideal for cooling IR sensors for use in astronomy and physics applications. The device is called a variable-conductance gas switch. It is essentially a small chamber, located between the cold stage and liquid helium cold-face, whose thermal conductance may be controlled by varying the pressure of helium gas within the chamber. A key feature of this device is the large range of temperature control achieved with a very small (less than 10 mW) heat input from the cryogenic temperature control switch.

Rayner, J. T.↗
NASA NTRS1988

Effects of eddy viscosity and thermal conduction and Coriolis force in the dynamics of gravity wave driven fluctuations in the OH nightglow

The chemical-dynamical model of Walterscheid et al. (1987), which describes wave-driven fluctuations in OH nightglow, was modified to include the effects of both eddy thermal conduction and viscosity, as well as the Coriolis force (with the shallow atmosphere approximation). Using the new model, calculations were performed for the same nominal case as used by Walterscheid et al. but with only wave periods considered. For this case, the Coriolis force was found to be unimportant at any wave period. For wave periods greater than 2 or 3 hours, the inclusion of thermal conduction alone greatly modified the results (in terms of a complex ratio 'eta' which expresses the relationship between the intensity oscillation about the time-averaged intensity and the temperature oscillation about the time-averaged temperature); this effect was reduced with the further inclusion of the eddy viscosity.

Hickey, M. P.↗
NASA NTRS1988

Conduction-driven chromospheric evaporation in a solar flare

Observations of gentle chromospheric evaporation during the cooling phase of a solar flare are presented. Line profiles of the low-temperature (T of about 6 x 10 to the 6th K) coronal Mg XI line, observed with the X-Ray Polychromator on the Solar Maximum Mission, show a blueshift that persisted for several minutes after the impulsive heating phase. This result represents the first detection of an evaporation signature in a soft X-ray line formed at this low temperature. By combining the Mg XI blueshift velocity data with simultaneous measurements of the flare temperature derived from Ca XIX observations, it is demonstrated that the upward flux of enthalpy transported by this gently evaporating plasma varies linearly with the downward flux of thermal energy conducted from the corona. This relationship is consistent with models of solar flares in which thermal conduction drives chromospheric evaporation during the early part of the cooling phase.

Zarro, Dominic M.↗
NASA NTRS1988

NBC boil-off calorimeter for measuring thermal conductivity of insulating materials

Modern temperature, pressure and flow sensors along with a high speed digital control system have been incorporated into an existing thermal conductivity apparatus (ASTM C745). The system has also been modified to include the use of liquid helium as the refrigerant, if desired. The apparatus can be used to study thermal conductivity in the temperature range from 4 K to room temperature. Preliminary results on insulating materials indicate that the system update has significantly improved the precision and operational characteristics of the apparatus. Basic principles of operation, sources of system error and the reduction of system error by application of digital control and modern sensors are discussed. Preliminary data are presented.

Dube, W. P.↗
NASA NTRS1989

Measuring Thermal Conductivities Of Rough Specimens

Thermal conductivity of irregularly surfaced specimen measured more accurately and reliably by use of heat-transfer adhesive establishing contact between specimen and reference standards. Method useful when specimen made up of fragments of material. Adhesive ensures good thermal contact to pieces not matching others in height. In rough-surfaced or unequally sized specimens, heat-flow pattern becomes distorted, and temperatures at measurement points do not accurately represent those throughout reference standards and specimen. Filling voids with conductive adhesive restores nearly uniform distribution heat flow.

Striepens, Aloys H.↗
NASA NTRS1988

Thermal conductance of pressed aluminum and stainless steel contacts at liquid helium temperatures

The thermal conductance of aluminum and stainless steel 304 sample pairs with surface finishes ranging from 0.1 to 1.6 microns rms roughness was investigated over a temperature range from 1.6 to 6.0 K. The thermal conductance follows a simple power law function of temperature, with the exponent ranging from 0.5 to 2.25, increases asymptotically with increasing applied force, and exhibits an anomaly for surface finishes in the 0.4 micron region.

Salerno, L. J.↗
NASA NTRS1989

Plasma conductivity for Comet Halley ionosphere

Observational as well as semitheoretical magnetic field profiles have been used to derive self-consistently the plasma conductivity profiles for the ionosphere of Comet Halley. The characteristic diffusion length for the field, according to the present model, is about 28 km; this is in very good agreement with the Giotto spacecraft observations. It is shown that ideal MHD as well as constant conductivity models are not appropriate for the study of dynamical structure of the Halley's ionosphere.

Buti, B.↗
NASA NTRS1989

Variable thermal properties and thermal relaxation time in hyperbolic heat conduction

Numerical solutions were obtained for a finite slab with an applied surface heat flux at one boundary using both the hyperbolic (MacCormack's method) and parabolic (Crank-Nicolson method) heat conduction equations. The effects on the temperature distributions of varying density, specific heat, and thermal relaxation time were calculated. Each of these properties had an effect on the thermal front velocity (in the hyperbolic solution) as well as the temperatures in the medium. In the hyperbolic solutions, as the density or specific heat decreased with temperature, both the temperatures within the medium and the thermal front velocity increased. The value taken for the thermal relaxation time was found to determine the 'hyperbolicity' of the heat conduction model. The use of a time dependent relaxation time allowed for solutions where the thermal energy propagated as a high temperature wave initially, but approached a diffusion process more rapidly than was possible with a constant large relaxation time.

Glass, David E.↗
NASA NTRS1987

Thermal conductivity and Kapitza boundary resistance of He-4 near T(gamma)

The preliminary results of high resolution measurements of the thermal conductivity of He-4 in a cell with a nominal 1 mm gap are reported and compared with previous results obtained with a 2 mm gap. The temperature dependence of the conductivity was found to be similar for both cells, indicating that size and boundary effects are well controlled. The detailed behavior of the Kapitza resistance just below T(gamma) is also reported.

Chui, T. C. P.↗
NASA NTRS1989

A model for including thermal conduction in molecular dynamics simulations

A technique is introduced for including thermal conduction in molecular dynamics simulations for solids. A model is developed to allow energy flow between the computational cell and the bulk of the solid when periodic boundary conditions cannot be used. Thermal conduction is achieved by scaling the velocities of atoms in a transitional boundary layer. The scaling factor is obtained from the thermal diffusivity, and the results show good agreement with the solution for a continuous medium at long times. The effects of different temperature and size of the system, and of variations in strength parameter, atomic mass, and thermal diffusivity were investigated. In all cases, no significant change in simulation results has been found.

Wu, Yue↗
NASA NTRS1989

Numerical simulation of hyperbolic heat conduction with convection boundary conditions and pulse heating effects

The paper describes the numerical simulation of hyperbolic heat conduction with convection boundary conditions. The effects of a step heat loading, a sudden pulse heat loading, and an internal heat source are considered in conjunction with convection boundary conditions. Two methods of solution are presened for predicting the transient behavior of the propagating thermal disturbances. In the first method, MacCormack's predictor-corrector method is employed for integrating the hyperbolic system of equations. Next, the transfinite element method, which employs specially tailored elements, is used for accurately representing the transient response of the propagating thermal wave fronts. The agreement between the results of various numerical test cases validate the representative behavior of the thermal wave fronts. Both methods represent hyperbolic heat conduction behavior by effectively modeling the sharp discontinuities of the propagating thermal disturbances.

Glass, David E.↗