Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Composite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Sorption and desorption properties of a CaH{sub 2}/MgB{sub 2}/CaF{sub 2} reactive hydride composite as potential hydrogen storage material

The hydrogenation behavior of 3CaH{sub 2}+4MgB{sub 2}+CaF{sub 2} composite was studied by manometric measurements, powder X-ray diffraction, differential scanning calorimetry and attenuated total reflection infrared spectroscopy. The maximum observed quantity of hydrogen loaded in the composite was 7.0 wt%. X-ray diffraction showed the formation of Ca(BH{sub 4}){sub 2} and MgH{sub 2} after hydrogenation. The activation energy for the dehydrogenation reaction was evaluated by DSC measurements and turns out to be 162{+-}15 kJ mol{sup -1} H{sub 2}. This value decreases due to cycling to 116{+-}5 kJ mol{sup -1} H{sub 2} for the third dehydrogenation step. A decrease of ca. 25-50 deg. C in dehydrogenation temperature was observed with cycling. Due to its high capacity and reversibility, this composite is a promising candidate as a potential hydrogen storage material. - Graphical abstract: PCI of 3CaH{sub 2}+4MgB{sub 2}+CaF{sub 2} reactive hydride composite at 325 deg. C and 350 deg. C. Open marks: dehydrogenation, closed marks: hydrogenation. Highlights: > The hydrogenation and dehydrogenation behavior of CaF{sub 2} doped CaH{sub 2}/MgB{sub 2} RHC is presented. > The new composite presents a superior hydrogen uptake compared with the non-doped composite.. > A reduction in the E{sub a} and the dehydrogenation temperature was observed by CaF{sub 2} doping and cycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of self-assembled layered double hydroxides/carbon composites by in situ solvothermal method and their application in capacitors

Nickel-aluminum layered double hydroxides/carbon (Ni-Al LDHs/C) composites have been successfully fabricated via a facile in situ water-ethanol system. LDHs nanosheets could highly disperse on the surface of colloidal carbonaceous spheres through the interfacial electrostatic force. Ni-Al LDHs/C composite electrode prepared at 50% ethanol system exhibits the highest capacitance of 1064 F g{sup -1} at a current of 2.5 A g{sup -1}, leading to a significant improvement in relation to each individual counterpart (3.5 and 463 F g{sup -1} for carbon and Ni-Al LDHs at 2.5 A g{sup -1}, respectively). And a possible mechanism was proposed for the formation of the composites. Highlights: Black-Right-Pointing-Pointer Ni-Al LDHs/C composites have been self-assembled by an in situ solvothermal method. Black-Right-Pointing-Pointer A possible growth mechanism to explain the composite is proposed. Black-Right-Pointing-Pointer Ni-Al LDHs/C composites display better electrochemical performance.

36 MATERIALS SCIENCE↗

SnO{sub 2}/ZnO composite structure for the lithium-ion battery electrode

In this article, SnO{sub 2}/ZnO composite structures have been synthesized by two steps hydrothermal method and investigated their lithium storage capacity as compared with pure ZnO. It has been found that these composite structures combining the large specific surface area, stability and catalytic activity of SnO{sub 2} micro-crystals, demonstrate the higher initial discharge capacity of 1540 mA h g{sup -1} with a Coulombic efficiency of 68% at a rate of 120 mA h g{sup -1} between 0.02 and 2 V and found much better than that of any previously reported ZnO based composite anodes. In addition, a significantly enhanced cycling performance, i.e., a reversible capacity of 497 mA h g{sup -1} is retained after 40 cycles. The improved lithium storage capacity and cycle life is attributed to the addition of SnO{sub 2} structure, which act as good electronic conductors and better accommodation of the large volume change during lithiation/delithiation process. - Graphical abstract: SnO{sub 2}/ZnO composite structures demonstrate the improved lithium storage capacity and cycle life as compared with pure ZnO nanostructure. Highlights: Black-Right-Pointing-Pointer Synthesis of SnO{sub 2}/ZnO composite structures by two steps hydrothermal approach. Black-Right-Pointing-Pointer Investigation of lithium storage capacity. Black-Right-Pointing-Pointer Excellent lithium storage capacity and cycle life of SnO{sub 2}/ZnO composite structures.

36 MATERIALS SCIENCE↗

Composition and microstructure of zirconium and hafnium germanates obtained by different chemical routes

The phase composition and morphology of zirconium and hafnium germanates synthesized by ceramic and co-precipitation routes were studied. The products were characterized using high-temperature X-ray diffraction analysis (XRD), Raman spectroscopy, scanning electron microscopy (SEM) and thermal (TG/DTA) analysis. To investigate the phase composition and stoichiometry of compounds the unit cell parameters were refined by full-profile Rietveld XRD analysis. The morphology of products and its evolution during high-temperature treatment was examined by SEM analysis. It was stated that there is the strong dependence of the phase composition and morphology of products on the preparation route. The ceramic route requires a multi-stage high-temperature treatment to obtain zirconium and hafnium germanates of 95% purity or more. Also, there are strong diffusion limitations to obtain hafnium germanate Hf{sub 3}GeO{sub 8} by ceramic route. On the contrary, the co-precipitation route leads to the formation of nanocrystalline single phase germanates of stoichiometric composition at a relatively low temperatures (less than 1000 °C). The results of quantitative XRD analysis showed the hafnium germanates are stoichiometric compounds in contrast to zirconium germanates that form a set of solid solutions. This distinction may be related to the difference in the ion radii of Zr and Hf. - Graphical abstract: The phase composition and morphology of zirconium and hafnium germanates synthesized by ceramic and co-precipitation routes were studied. It was stated that there is the strong dependence of the phase composition and morphology of products on the preparation route. Display Omitted - Highlights: • Zr and Hf germanates were synthesized by ceramic and co-precipitation routes. • The morphology of products depends on the synthesis parameters. • Zirconium germanates forms a set of solid solutions. • Hafnium germanates are stoichiometric compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Broadband sensitized white light emission of g-C{sub 3}N{sub 4}/Y{sub 2}MoO{sub 6}:Eu{sup 3+} composite phosphor under near ultraviolet excitation

The g-C{sub 3}N{sub 4}/Y{sub 2}MoO{sub 6}:Eu{sup 3+} composite phosphors were synthesized and characterized by X-ray diffraction, Fourier transform-infrared spectroscopy, ultraviolet visible diffuse reflection spectra, photoluminescence spectra and luminescence decay curves. Under the excitation of 360 nm near ultraviolet light, these composite phosphors show tunable emission from blue to red region, in which white light emission can be obtained in term of appropriate quality proportion of Y{sub 2}MoO{sub 6}:Eu{sup 3+} relative to g-C{sub 3}N{sub 4}/Y{sub 2}MoO{sub 6}:Eu{sup 3+}. In addition, the emission color can be also dependent on the excitation wavelength in g-C{sub 3}N{sub 4}/Y{sub 2}MoO{sub 6}:Eu{sup 3+} composite phosphor. - Graphical abstract: Under the excitation of 360 nm near ultraviolet light, the g-C{sub 3}N{sub 4}/Y{sub 2}MoO{sub 6}:Eu{sup 3+} composite phosphors show tunable emission from blue to red region, in which white light emission can be obtained. - Highlights: • The g-C3N4/Y2MoO6:Eu{sup 3+} composite phosphors were synthesized and characterized. • White light emission was realized in the g-C3N4/Y2MoO6:Eu{sup 3+} composites under UV excitation. • A novel idea to realize the broadband sensitized white light emission in phosphors was provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystalline polyoxometalate (POM)–polyethylene glycol (PEG) composites aimed as non-humidified intermediate-temperature proton conductors

Crystalline polyoxometalate (POM)–polyethylene glycol (PEG) composites aimed as non-humidified intermediate-temperature proton conductors were synthesized and characterized by single crystal and powder XRD, solid state MASNMR, and TG-DTA measurements. Among the POM–PEG composites, Cs{sub 2.7}H{sub 0.3}[PW{sub 12}O{sub 40}]·1.2PEG1000 (CsHPW-PEG1000) possessed one-dimensional channels with diameters of ca. 6 and 8 Å, where PEG probably resided, and showed the best performance as a proton conductor (1.2×10{sup −5} S cm{sup −1} at 443 K). Proton conductivities of POM–PEG composites decreased by the increase in molecular weights of PEG (CsHPW-PEG12,000) or anion charges (CsHSiW-PEG1000). Variable contact time {sup 13}C-CP (cross polarization) MASNMR revealed that local mobility (i.e., segmental motion) of PEG is related to the trends in proton conductivities. These results show that amount of acidic protons (H{sup +}) is not the primary factor in proton conduction and that segmental motion of PEG assists the proton hopping among POMs in the crystal lattice of POM–PEG composites. - Graphical abstract: Non-humidified intermediate-temperature proton conduction in crystalline polyoxometalate (POM)–polyethylene (PEG) composites are assisted by the segmental motion of PEG. - Highlights: • Crystalline polyoxometalate–polyethlene glycol (PEG) composites were synthesized. • CsHPW-PEG1000 possessed one-dimensional channels and showed the highest proton conductivity. • {sup 13}C CPMASNMR revealed that segmental motion of PEG is related to the proton conduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cu- and Zr-based metal organic frameworks and their composites with graphene oxide for capture of acid gases at ambient temperature

Highlights: • Incorporation of GO in Cu- and Zr-based MOFs resulted in additional porosity at the interstitial MOF/GO spaces. • The UiO-66-NH{sub 2}/GO composite exhibited enhanced CO{sub 2} capacity at higher pressures. • CO{sub 2}/N{sub 2} selectivity of HKUST-1/GO was higher compared to pure HKUST-1. • The HKUST-1 crystallites in the presence of GO exhibited enhanced H{sub 2}S sorption kinetics. • The UiO-66 based adsorbents were more stable in humidity conditions than the HKUST-1 based ones. - Abstract: Capture of acid gases (CO{sub 2} and H{sub 2}S) by liquid solvent absorption is the common industrial practice, yet capture relying on solid adsorbents is increasingly gaining interest as potential alternative towards less energy-demanding operations. Herein, we developed and examined various metal organic frameworks (MOFs) bearing Cu- and Zr- metal clusters and their composites with graphene oxide (GO), and evaluated their performance for CO{sub 2} and H{sub 2}S adsorption. Specifically, UiO-66, UiO-66-NH{sub 2}, HKUST-1, and their GO composites were grown, subjected to structural, morphological, and textural characterization, and subsequently evaluated for their adsorption capacity and selectivity at ambient temperature. The crystallinity of the parent MOFs was preserved upon in-situ growth of the MOF/GO composites, while incorporation of GO yielded uniformly-shaped and well-dispersed MOF crystals resulting in enhanced sorption kinetics, and increased the pore volume compared to pure MOFs due to additional porosity formed in the interstitial spaces between the MOF crystallites and the GO flakes. To this extent, the interplay between additional porosity and pore functionalities in the competitive CO{sub 2} and N{sub 2} adsorption was investigated. UiO-66-NH{sub 2} exhibited enhanced CO{sub 2} capacity (3.07 mmol/g at 25 °C and 4 bar) and the highest CO{sub 2}/N{sub 2} selectivity (167 at 1 bar) among the tested MOFs, due to the presence of the amine functional groups in the organic linker that enhanced affinity with CO{sub 2}. At increased pressures, the UiO-66-NH{sub 2}/GO composite exhibited higher CO{sub 2} capacity compared to pure UiO-66-NH{sub 2}, which is attributed to activation of the additional porosity between the MOF crystallites and the GO layers. HKUST-1/GO selectivity was also enhanced compared to HKUST-1 in all pressures tested. Under humid environment, the UiO-66 based structures were relatively stable in contrast to the HKUST-1 ones that underwent gradual degradation. These composites offer functionalization tunability due to the presence of both MOF and GO counterparts for targeted gas capture applications.

36 MATERIALS SCIENCE↗

Effect of milling time and CNT concentration on hardness of CNT/Al{sub 2024} composites produced by mechanical alloying

Carbon nanotube/2024 aluminum alloy (CNT/Al{sub 2024}) composites were fabricated with a combination of mechanical alloying (MA) and powder metallurgy routes. Composites were microstructurally and mechanically evaluated at sintering condition. A homogeneous dispersion of CNTs in the Al matrix was observed by a field emission scanning electron microscopy. High-resolution transmission electron microscopy confirmed not only the presence of well dispersed CNTs but also needle-like shape aluminum carbide (Al{sub 4}C{sub 3}) crystals in the Al matrix. The formation of Al{sub 4}C{sub 3} was suggested as the interaction between the outer shells of CNTs and the Al matrix during MA process in which crystallization took place after the sintering process. The mechanical behavior of composites was evaluated by Vickers microhardness measurements indicating a significant improvement in hardness as function of the CNT content. This improvement was associated to a homogeneous dispersion of CNTs and the presence of Al{sub 4}C{sub 3} in the aluminum alloy matrix. - Highlights: Black-Right-Pointing-Pointer The 2024 aluminum alloy was reinforced by CNTs by mechanical alloying process. Black-Right-Pointing-Pointer Composites were microstructural and mechanically evaluated after sintering condition. Black-Right-Pointing-Pointer The greater the CNT concentration, the greater the hardness of the composites. Black-Right-Pointing-Pointer Higher hardness in composites is achieved at 20 h of milling. Black-Right-Pointing-Pointer The formation of Al{sub 4}C{sub 3} does not present a direct relationship with the milling time.

36 MATERIALS SCIENCE↗

Morphological and electrochemical characterization of electrodeposited Zn–Ag nanoparticle composite coatings

Silver nanoparticles with an average size of 23 nm were chemically synthesized and used to fabricate Zn–Ag composite coatings. The Zn–Ag composite coatings were generated by electrodeposition method using a simple sulfate plating bath dispersed with 0.5, 1 and 1.5 g/l of Ag nanoparticles. Scanning electron microscopy, X-ray diffraction and texture co-efficient calculations revealed that Ag nanoparticles appreciably influenced the morphology, micro-structure and texture of the deposit. It was also noticed that agglomerates of Ag nanoparticles, in the case of high bath load conditions, produced defects and dislocations on the deposit surface. Ag nanoparticles altered the corrosion resistance property of Zn–Ag composite coatings as observed from Tafel polarization, electrochemical impedance analysis and an immersion test. Reduction in corrosion rate with increased charge transfer resistance was observed for Zn–Ag composite coatings when compared to a pure Zn coating. However, the particle concentration in the plating bath and their agglomeration state directly influenced the surface morphology and the subsequent corrosion behavior of the deposits. - Highlights: • Synthesis of Ag nanoparticles with an average size of 23 nm • Fabrication of Zn/nano Ag composite coating on mild steel • Composite coatings showed better corrosion resistance. • Optimization of particle concentration is necessary.

36 MATERIALS SCIENCE↗

In situ fabrication and characterization of cobalt ferrite nanorods/graphene composites

Cobalt ferrite nanorods/graphene composites were prepared by a one-step hydrothermal process using NaHSO{sub 3} as the reducing agent and 1-propyl-3-hexadecylimidazolium bromide as the structure growth-directing template. The reduction of graphene oxide and the in situ formation of cobalt ferrite nanorods were accomplished in a one-step reaction. The structure and morphology of as-obtained composites were characterized by field emission scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscopy, atomic force microscope, X-ray diffractometer, Fourier transform infrared spectra, X-ray photoelectron spectroscopy and Raman spectroscopy. Uniform rod-like cobalt ferrites with diameters of about 100 nm and length of about 800 nm were homogeneously distributed on the graphene sheets. The hybrid materials showed a saturation magnetization of 42.5 emu/g and coercivity of 495.1 Oe at room temperature. The electromagnetic parameters were measured using a vector network analyzer. A minimum reflection loss (RL) of − 25.8 dB was observed at 16.1 GHz for the cobalt ferrite nanorods/graphene composites with a thickness of 2 mm, and the effective absorption frequency (RL < − 10 dB) ranged from 13.5 to 18.0 GHz. The composites exhibited better absorbing properties than the cobalt ferrite nanorods and the mixture of cobalt ferrite nanorods and graphene. - Highlights: • Reduction of GO and formation of ferrites were accomplished in a one-step reaction. • Ionic liquid was used to control 1D growth of ferrite nanorods for the first time. • Cobalt ferrite nanorods/graphene composites showed dielectric and magnetic loss. • Cobalt ferrite nanorods/graphene composites exhibited better absorbing properties.

36 MATERIALS SCIENCE↗

Microstructure and thermal properties of copper–diamond composites with tungsten carbide coating on diamond particles

An effective method for preparing tungsten carbide coating on diamond surfaces was proposed to improve the interface bonding between diamond and copper. The WC coating was formed on the diamond surfaces with a reaction medium of WO{sub 3} in mixed molten NaCl–KCl salts and the copper–diamond composites were obtained by vacuum pressure infiltration of WC-coated diamond particles with pure copper. The microstructure of interface bonding between diamond and copper was discussed. Thermal conductivity and thermal expansion behavior of the obtained copper–diamond composites were investigated. Results indicated that the thermal conductivity of as-fabricated composite reached 658 W m{sup −} {sup 1} K{sup −} {sup 1}. Significant reduction in coefficient of thermal expansion of the composite compared with that of pure copper was obtained. - Highlights: • WC coating was successfully synthesized on diamond particles in molten salts. • WC coating obviously promoted the wettability of diamond and copper matrix. • WC coating greatly enhanced the thermal conductivity of Cu–diamond composite. • The composites are suitable candidates for heat sink applications.

36 MATERIALS SCIENCE↗

Influence of surface morphology and UFG on damping and mechanical properties of composite reinforced with spinel MgAl{sub 2}O{sub 4}-SiC core-shell microcomposites

Interface between ceramic particulate and matrix is known to control the response of the materials and functionality of the composite. Among numerous physical properties, grain structure of the materials has also played a significant role in defining the behaviour of metal matrix composites. Usually, silicon carbide (SiC) particles show poor interfacial wettability in aluminium melt. Herein, we were successfully synthesized magnesium oxide (MgO) and nanocrystalline magnesium aluminate (MgAl{sub 2}O{sub 4}) spinel coated silicon carbide (SiC) core-shell micro-composites through sol-gel technique to improve the wettability of dispersoids. Core-shell structures of submicron size were thoroughly investigated by various characterization techniques. Further, aluminium matrix composites incorporated with pristine SiC, MgO grafted SiC and MgAl{sub 2}O{sub 4} grafted SiC particles were fabricated by stir casting technique, respectively. Additionally, as-cast composites were processed via friction stir processing (FSP) technique to observe the influence of grain refinement on mechanical and damping properties. Electron back scattered diffraction (EBSD), Field emission scanning electron microscopy (FE-SEM) and X-ray energy dispersion spectroscopy (EDX) analysis were conducted for investigating grain size refinement, adequate dispersion, stability and de-agglomeration of encapsulated SiC particles in aluminium matrix. The mechanical as well as thermal cyclic (from − 100 to 400 °C) damping performance of the as-cast and friction stir processed composites were studied, respectively. Finally, the enhanced properties were attributable to reduced agglomeration, stabilization and proper dispersion of the tailored SiC particles Al matrix. - Highlights: •Synthesizing a novel coating layer of MgO and MgAl{sub 2}O{sub 4} spinel onto SiC particles •Significant improvement in UTS and hardness by reinforcing tailored SiC in Al •Significant grain refinements were obtained through FSP •SiC/MgAl{sub 2}O{sub 4}/Al exhibits ~ 61% higher storage modulus as compare to pure Al after FSP.

36 MATERIALS SCIENCE↗

Ameliorated mechanical and thermal properties of SiC reinforced Al matrix composites through hybridizing carbon nanotubes

Highlights: • The carbon nanotubes were hybridized into SiC reinforced Al based composites. • Hybridization of CNTs leads to the uniform dispersion of SiC in the Al matrix. • Hybridization of CNTs enhances the strength and ductility of the composites. • CNTs can help to decrease the coefficient of thermal expansion of the composites. - Abstract: By hybridizing carbon nanotubes (CNTs) into SiC reinforced Al matrix composites, a novel composite was fabricated to achieve excellent mechanical properties and low coefficient of thermal expansion simultaneously. The study demonstrated that the CNTs can help to acquire the uniform dispersion of SiC particles in the Al matrix, because of their interaction during ball milling and hot rolling processes. In addition, the results revealed that such design optimizes both the mechanical and thermal properties, due to homogeneous microstructure as well as tight and uniform interfaces induced by the addition of CNTs. Strengthening mechanism and Sideridis's model were used to discuss the effects of the CNTs on the mechanical and thermal properties. This study opens up an unexplored avenue for simultaneous improvement of the mechanical and thermal properties of metal matrix composites.

36 MATERIALS SCIENCE↗

Effects of the rolling temperature on microstructure and mechanical properties of 2Cr13/316L laminated composites prepared by accumulative roll-bonding (ARB)

Highlights: • The rolling temperature affects the grain size and microstructural phases of the composite plates. • The rolling temperature affects tensile strength and bending strength of 2Cr13/316L properties of the composite plates. • The temperature gradient and thermal deformation of center and outside regions are different during rolling process. • Composite plate with higher strength and elongation can be obtained by rolling processes. - Abstract: The microstructure and mechanical properties of 2Cr13/316L composite plates by hot-rolling at different rolling temperatures of 1130 °C, 1180 °C, 1250 °C, 1300 °C are investigated in details. With the increase of the rolling temperature, the tensile strength and bending strength of 2Cr13/316Lwere reduced first and then increased slightly due to the coarsening of grains and the increasing of ferrite content in 2Cr13 layers. The highest tensile elongation is obtained at the composite plate with rolling temperature of 1180 °C. 2Cr13/316L composite plates obtained by hot rolling processes were able to withstand larger bending deformation, and no cracks or interfacial delamination can be found in the bending process because of a strong combined interface.

36 MATERIALS SCIENCE↗

Influence of the precipitation pH on the compositions and properties of Bi-based oxyiodide photocatalysts

Graphical abstract: A series of Bi-based oxyiodide photocatalysts with different compositions were synthesized via a precipitation-filtration process followed by hydrothermal treatment. The effects of the precipitation pH values on the compositions and photocatalytic activities of the bismuth oxyiodides were investigated. Research highlights: {yields} BiOI, Bi{sub 4}O{sub 5}I{sub 2}, Bi{sub 7}O{sub 9}I{sub 3} and Bi{sub 5}O{sub 7}I were obtained via a precipitation-filtration process followed by hydrothermal treatment. {yields} The compositions of the bismuth oxyiodides could be controlled by adjusting the precipitation pH values. {yields} All the bismuth oxyiodides exhibit photocatalytic activity on decomposing methyl orange. -- Abstract: A series of Bi-based oxyiodide photocatalysts with different compositions were synthesized via a precipitation-filtration process followed by hydrothermal treatment. The compositions of the bismuth oxyiodides could be controlled by adjusting the precipitation pH values. The effects of the precipitation pH values on the compositions and photocatalytic activities of the bismuth oxyiodides were investigated and the relationship between structure and photocatalytic property is discussed. All the as-prepared powders exhibit photocatalytic activity on decomposing methyl orange under visible light irradiation. The activity increases with increasing content of iodine in the bismuth oxyiodides.

36 MATERIALS SCIENCE↗

Rare earth (Eu{sup 3+}, Tb{sup 3+}) centered composite gels Si-O-M (M = B, Ti) through hexafluoroacetyl-acetone building block: Sol-gel preparation, characterization and photoluminescence

Highlights: Black-Right-Pointing-Pointer Composite gel of Si-O-M (M = B, Ti). Black-Right-Pointing-Pointer Hybrids with Si-O-B possess favorable luminescence property. Black-Right-Pointing-Pointer Sol-gel process of different alkoxides. -- Abstract: This report focuses on the syntheses of a series of novel photoactive composite xerogels materials in which the functionalized hexafluoroacetylacetone (HFAASi) organic components are grafted into the different inorganic networks (SiO{sub 2}-B{sub 2}O{sub 3} or SiO{sub 2}-TiO{sub 2}) via covalent bonds through a sol-gel process. Subsequently, the physical characterization and especially photoluminescent properties of the resulting xerogel materials are studied in detail. Except for composite xerogels linked to SiO{sub 2}-TiO{sub 2} networks, all of these composite xerogels exhibit homogeneous microstructures and morphologies, suggesting that molecular-based materials are obtained with strong covalent bonds between the organic {beta}-diketone ligand and inorganic matrices. In addition, the ternary rare earth composite gels present stronger luminescent intensities, longer lifetimes, and higher luminescent quantum efficiencies than the binary ones, indicating that the introduction of the second ligands (phen) can sensitize the luminescent emission of the rare earth ions in the ternary hybrid systems. It should be especially noted that these composite xerogels based on Si-O-B networks possess not only higher thermal stability but also stronger luminescent intensities than the other systems linked to different inorganic networks.

36 MATERIALS SCIENCE↗

Facile synthesis and characterization of ZnFe{sub 2}O{sub 4}/{alpha}-Fe{sub 2}O{sub 3} composite hollow nanospheres

Highlights: Black-Right-Pointing-Pointer ZnFe{sub 2}O{sub 4}/{alpha}-Fe{sub 2}O{sub 3} composite hollow nanospheres were successfully synthesized via a facile method. Black-Right-Pointing-Pointer Detailed structural, morphology and the phase composition were studied. Black-Right-Pointing-Pointer The incorporation of ZnFe{sub 2}O{sub 4} and {alpha}-Fe{sub 2}O{sub 3} gives an appropriate band gap value to utilize solar energy. -- Abstract: ZnFe{sub 2}O{sub 4}/{alpha}-Fe{sub 2}O{sub 3} composite hollow nanospheres were successfully fabricated via a facile one-pot solvothermal method, utilizing polyethylene glycol as soft template. X-ray diffraction and scanning electron microscopy analysis revealed that the prepared nanospheres with cubic spinel and rhombohedra composite structure had a uniform diameter of about 370 nm, and the hollow structure could be further confirmed by transmission electron microscopy. Energy dispersive X-ray, X-ray photoelectron spectroscopy and Fourier transform infrared techniques were also applied to characterize the elemental composition and chemical bonds in the hollow nanospheres. The ZnFe{sub 2}O{sub 4}/{alpha}-Fe{sub 2}O{sub 3} composite hollow nanospheres show attractive light absorption property for potential applications in electronics, optics, and catalysis.

36 MATERIALS SCIENCE↗

Fabrication of photocatalytic composite of multi-walled carbon nanotubes/TiO{sub 2} and its application for desulfurization of diesel

Highlights: Black-Right-Pointing-Pointer MWNTs and TiO{sub 2} were mixed well, forming uniform microstructure in MWNTs/TiO{sub 2} composites. Black-Right-Pointing-Pointer The combination of MWNTs and TiO{sub 2} contribute to improving photocatalytic activity of TiO{sub 2}. Black-Right-Pointing-Pointer MWNTs/TiO{sub 2} composite is an effective photo-catalyst for the removal of sulfur from commercial diesel. -- Abstract: Composite of multi-walled carbon nanotubes (MWNTs) and titanium (IV) oxide (TiO{sub 2}) were prepared by a heterogeneous gelation method. The activities of the MWNTs/TiO{sub 2} composites were evaluated by photocatalytic oxidative desulfurization using dibenzothiophene (DBT), 4,6-dimethyl dibenzothiophene (4,6-DMDBT), n-tetradecane, and commercial diesel under irradiation using a high-pressure Hg lamp. The microstructures of MWNTs/TiO{sub 2} composites were characterized by N{sub 2} adsorption, scanning electron microscopy, transmission electron microscope, and X-ray diffraction. It was found that more than 98% of sulfur compounds in commercial diesel were oxidized and removed by the use of the MWNTs/TiO{sub 2} composite as a photocatalyst.

36 MATERIALS SCIENCE↗