Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cleaning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Bucket and bunch parameters for clean injection of low energy gold ions into RHIC

Collisions of gold nuclei in RHIC at five low energies, 3.85, 4.55, 5.75, 7.30, and 9.80 GeV per nucleon, are planned in the search for a critical point in the nuclear matter phase diagram. As discussed previously, having longer bunches of gold ions is advantageous for this program. The longer bunches are made possible by six new “9 MHz” cavities, three per ring, which produce harmonic 120 RF buckets. This is one third the harmonic number (360) produced by the standard “28 MHz” cavities.

43 PARTICLE ACCELERATORS↗

Optimization of nanosecond transient plasma ignition for clean combustion

Based on a previously developed, retrofittable nanosecond pulsed TPS ignition prototype, transient plasma ignition technology is evaluated for higher energy efficiency and lower emission by optimizing pulse power conditions using advanced diagnostic-based approaches. Combustion performances of a TPS ignition electrode powered by nanosecond voltage pulses of two different rising times (i.e. 4 ns and 8 ns) but the same full-width-half-maximum (FWHM) of 6 ns were compared for single-shot and high-repetition-rate ignitions. The use of faster risetime reduces the voltage amplitude criterion for combustion ignition under a single-shot, stoichiometric fuel-air condition, resulting in higher energy efficiency. In addition, it was demonstrated that high-frequency bursts of pulses positively affect the combustion process; four-consecutive pulsed plasma ignition at a pulse repletion rate (PRR) of 1 kHz needs only half of the voltage to achieve combustion, and increasing the PRR from 1 kHz to 10 kHz improves the energy efficiency by a factor of >1.3. A prototype of retrofittable nanosecond pulsed ignition system was developed and tested in a newly built testing/diagnostic platform, paving the way for ultimate optimization of the TPS prototype for low cost, highly efficient, and low emission combustion.

02 PETROLEUM↗

Automated Clean Chemistry for Bulk Analysis of Environmental Swipe Samples – Final Report

Sample preparation methods for mass spectrometry are being automated using commercial-off-the-shelf (COTS) equipment to shorten lengthy and costly manual chemical purification procedures. This development addresses a serious need in the International Atomic Energy Agency’s (IAEA) Network of Analytical Laboratories (NWAL) to increase efficiency in the Bulk Analysis of Environmental Samples for Safeguards program with a method that allows unattended, overnight operation. In collaboration with Elemental Scientific Inc. (ESI), the prepFAST-MC2 was designed based on COTS equipment. It was modified for uranium/plutonium separations using renewable columns packed with Eichrom TEVA® and UTEVA® resins, with a chemical separation method based on the Oak Ridge National Laboratory (ORNL) NWAL chemical procedure. Initial verification of individual columns yielded small elution volumes with consistent elution profiles and good recovery. Combined column calibration demonstrated ample separation without crosscontamination of the eluent. Automated packing and unpacking of the built-in columns initially showed >15% deviation in resin loading by weight, which can lead to inconsistent separations. Optimization of the packing and unpacking methods led to a reduction in the variability of the packed resin to less than 5% daily. Based on the initial experience at ORNL with the prepFAST-MC2, a second-generation model, the prepFAST-SR, was built by ESI. The newly designed prepFAST-SR has several upgrades compared with the original prepFAST-MC2. The upgrades largely addressed issues with the reliability of unpacking the Eichrom columns and with ventilation to ensure adequate removal of acid vapors. Both systems are currently installed in the Ultra-Trace Forensics Science Center at ORNL. Separations of mixed uranium and plutonium samples containing certified reference materials were analyzed by multi-collector inductively coupled plasma mass spectrometry and yielded good results. Current efforts have demonstrated a wider applicability of the prepFAST system. Near-quantitative removal of metal interferences was achieved with the system in both uranium and plutonium separated fractions. Successful system validation was completed with several archived samples. Isotopic results from archived samples and certified reference materials were well within data quality limits for the IAEA NWAL. Additional COTS equipment has been evaluated for its potential to aid the prepFAST-SR system in reducing the time allotments and cleanroom infrastructure requirements for accurate separations. Overall, these efforts help ensure continued efficient and effective operation of the NWAL. Comparison of the amount of personnel time necessary for successful manual vs. automated chemical separations showed a significant decrease in hands-on time from 9.8 hours to 35 minutes for seven samples, respectively. This documented time savings and reduced labor translates to a significant cost savings per sample. Overall, the system will enable faster sample reporting times at reduced cost by limiting personnel hours dedicated to the chemical separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Model Development and Analysis of Clean and Efficient Engine Combustion FY 2018 Annual Progress Report

Simulations of 1D laminar flames using detailed kinetic mechanisms are useful in a wide variety of engine combustion applications. The most common use is in the computation of laminar flame speeds, which are useful for chemical mechanism validation, as inputs to turbulent flame speed correlations, and to predict knocking in spark-ignition engines. Other applications include generation of flamelet libraries for CFD simulations and prediction of combustion dynamics in micro-flow reactors. These fundamental combustion simulations are an important component in the study of realistic transportation fuel models in boosted spark-ignition and multi-mode engine configurations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Computationally Efficient Modeling of High Efficiency Clean Combustion Engines

This project focuses on the development and application of computationally efficient and accurate simulation tools for prediction of engine combustion. Simulation of combustion aids in development of new high-efficiency and low-emissions engines by allowing detailed characterization of in-cylinder engine processes that are difficult to measure directly. Simulation also allows exploratory investigations of new concepts, such as new combustion chamber geometry, allowing valuable and limited experimental resources to be focused on the most promising strategies.

30 DIRECT ENERGY CONVERSION↗

On the Path to Energy Independence and a Clean Power Future – LED Lighting Retrofit and Solar Power Generation for the CTUIR Science and Engineering Laboratory and Public Transit Center (Rev.1)

This project supports the goals of the Energy Policy for the Confederated Tribes of the Umatilla Indian Reservation (CTUIR) through the implementation of an energy efficiency measure (LED lighting retrofit) and construction of a fixed rack (stationary) ground-mounted solar photovoltaic (PV) array energy generation system. The project objective was to eliminate the net demand for grid-based utility energy at two tribal facilities: the CTUIR Field Station and the Public Transit Center (consisting of bus barn and maintenance shop buildings). A total of 332 lighting fixtures were retrofitted with high efficiency LEDs at the three buildings within the project scope. The solar PV array constructed adjacent to the Field Station (46330 Timine Way, Pendleton, OR 97801) has a nameplate capacity of 97.98 kW DC . The project was managed by staff from the CTUIR Energy & Environmental Sciences Program within the Department of Natural Resources and the final budget was $\$ $288,206. Data was collected during a 12 month monitoring period following construction of the aptly named Ántukš–Tín̓qapapt Solar PV Array and assessed to determine project results. During this time, the solar PV system generated 125,580 kWh of energy according to SolrenView solar PV system monitoring service. In contrast, the total realized utility energy and cost savings due to the project were estimated by comparing 24 months of consecutive utility billing data. Results of this comparison indicate that grid-based utility energy demand was reduced by 121,280 kWh, or roughly 80% of the total electricity consumed by both facilities. The cost savings associated with this energy demand reduction were $\$ $11,104 and a payback period of 5.7 years was estimated for recovering the CTUIR’s investment. However, it should be noted that these figures are not representative of the savings that could be obtained under normal, error-free (i.e. faultless) conditions. Several undesirable events occurred during the 12 month monitoring and evaluation period, the effects of which were quantified using available data so that results under a “Faultless Scenario” could be estimated. Annual energy and cost savings estimated for the Faultless Scenario were approximately 166,289 kWh and $\$ $15,225, respectively. These figures should prove to be more representative of the long-term average annual results achieved in response to the project and suggest a payback period closer to 4.5 years for the CTUIR.

14 SOLAR ENERGY↗

Model Development and Analysis of Clean and Efficient Engine Combustion. 2019 Annual Progress Report

Internal combustion engine design is increasingly driven by computational models used to predict performance metrics, which previously would have been predicted by limited design intuition or expensive and timeconsuming physical testing. Improved model capabilities shorten design cycles and enable the production of cleaner and more efficient engines. This project focuses on advancing the state of the art in internal combustion engine simulations. The overarching goal is to enable predictive models and reduced time to solution for simulations that have impacts on combustion engine design.

33 ADVANCED PROPULSION SYSTEMS↗

The Fission-Fusion Hybrid Molten Salt Reactor: A Clean Energy Game Changer

This White Paper proposes the Fission-Fusion Hybrid Molten Salt Reactor (FFHMSR) as the solution to the world’s growing need for abundant, carbon-free, safe electricity. The FFHMSR combines a critical molten salt fission reactor with a fusion source of energetic neutrons in a single connected system, offering advantages that neither has independently. The molten salt reactor provides improved safety and greater efficiency, while the neutron source’s high energy neutrons eliminate the need for fuel enrichment and reprocessing and can remove all actinides from the waste stream. The dynamic balance between the dual processes capitalizes on their strengths and synergies.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Oneida Indian Nation Community-Scale Clean Energy Deployment Combined Heat and Power Project. Tribal Renewable Energy (Final Technical Report)

This document reports on the Oneida Indian Nation's to upgrade and improve the operation of the Nation’s Central Utility Plant (CUP) so that previously wasted energy could be captured and utilized to produce electricity. The final technical report contains an overview of the project and the project objectives, which are increased energy efficiency, reduced dependency on fossil fuels, and lower energy costs while maintaining sound environmental stewardship of natural resources. The report describes the specific activities and milestones accomplished, a summary of the current status of the project, including objectives and results achieved, and a description of project management, challenges and lessons learned.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A University Consortium on Efficient and Clean High Pressure Lean Burn (HPLB) Engines

The recent spike in fuel prices has sharply focused attention on improving fuel economy of power plants for transportation, particularly for the gasoline passenger car engine. Shaped by a number of constraints, some engineering in nature, some economic, and some environmental, the spark ignition gasoline engine currently provides lower than optimal fuel economy. In view of the changed world situation it is imperative to consider all reasonable measures to go beyond the current efficiency levels. The programmatic needs of DOE EERE call for a 20-40% improvement in fuel economy in a light-duty vehicle with dramatically lower emissions. Achieving such breakthrough efficiencies in an engine system is a very challenging objective. The combination of lean burn, high pressure (resulting from a high compression ratio and/or boost), unthrottled operation in a stratified charge, highly dilute combustion system points to a promising pathway for attaining these objectives. The goal of the proposed work is to explore new areas and regimes of combustion that can enable future gasoline engines with 20-40% improved fuel economy.

02 PETROLEUM↗

Deployment of Energy Efficiency and Clean Energy on Indians Lands – A Community Solar Project

The Eastern Band of Cherokee Indians (EBCI or Tribe) is a federally recognized Indian Tribe located on ancestral homelands in western North Carolina. The Tribe is comprised of just over 16,000 enrolled members, with an estimated 8,000 – 10,000 residing on tribal lands. The Qualla Boundary is comprised of over 56,000 acres of contiguous trust land adjacent to the Great Smoky Mountain National Park. The EBCI also possess an assortment of scattered parcels of varying sizes across western North Carolina, some in trust status and others in deeded or fee simple. This project was implemented on a trust parcel in Cherokee County, NC. The Tribe was awarded the maximum amount of $\$ $1,000,000 for the installation of a 705.6 kilowatt (kW) solar PV array to supplement the power consumed and reduce annual utility costs at the Harrah’s Cherokee Valley River (HCVR) casino and hotel in Murphy, NC. The casino is a tribal entity of the Tribe. The total cost of the project was $\$ $2.364 million. The system was officially commissioned on April 12, 2019. For the purpose of calculating the amount of power produced and reduction in utility costs, the time frame assessed is May 2019 through April 2020. All power generated was consumed onsite.Based on the first full year of data, the project achieved the estimated 8.3% reduction in utility costs. A total of six casino and tribal staff were trained and received a North American Board of Certified Energy Practitioners (NABCEP) certification, giving our staff the resources and skills to manage and operate the solar PV array. Based on the Tribal match of $\$ $1,377,797 and estimated net annual benefit of $89,000, the estimated return on investment (ROI) is 15.48 years.

14 SOLAR ENERGY↗