Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Catalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Design and synthesis of bimetallic electrocatalyst with multilayered Pt-skin surfaces.

Advancement in heterogeneous catalysis relies on the capability of altering material structures at the nanoscale, and that is particularly important for the development of highly active electrocatalysts with uncompromised durability. Here, we report the design and synthesis of a Pt-bimetallic catalyst with multilayered Pt-skin surface, which shows superior electrocatalytic performance for the oxygen reduction reaction (ORR). This novel structure was first established on thin film extended surfaces with tailored composition profiles and then implemented in nanocatalysts by organic solution synthesis. Electrochemical studies for the ORR demonstrated that after prolonged exposure to reaction conditions, the Pt-bimetallic catalyst with multilayered Pt-skin surface exhibited an improvement factor of more than 1 order of magnitude in activity versus conventional Pt catalysts. The substantially enhanced catalytic activity and durability indicate great potential for improving the material properties by fine-tuning of the nanoscale architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Remotely Bonded Bridging Dioxygen Ligands Enhance Hydrogen Transfer in a Silica-Supported Tetrairidium Cluster Catalyst

A longstanding challenge in catalysis by noble metals has been to understand the origin of enhancements of rates of hydrogen transfer that result from bonding of oxygen near metal sites. We investigated structurally well-defined catalysts consisting of supported tetrairidium carbonyl clusters with single-atom (apical iridium) catalytic sites for ethylene hydrogenation. Reaction of the clusters with ethylene and H 2 followed by O 2 led to the onset of catalytic activity as a terminal CO ligand at each apical Ir atom was removed and bridging dioxygen ligands replaced CO ligands at neighboring (basal-plane) sites. The presence of the dioxygen ligands caused a 6-fold increase in the catalytic reaction rate, which is explained by the electron-withdrawing capability induced by the bridging dioxygen ligands, consistent with the inference that reductive elimination is rate determining. Electronic structure calculations demonstrate an additional role of the dioxygen ligands, changing the mechanism of hydrogen transfer from that involving equatorial hydride ligands to that involving bridging hydride ligands. This mechanism is made evident by an inverse kinetic isotope effect observed in ethylene hydrogenation reactions with H 2 and, alternatively, with D 2 on the cluster incorporating the dioxygen ligands, and is a consequence of quasi-equilibrated hydrogen transfer in this catalyst. The same mechanism accounts for rate enhancements induced by the bridging dioxygen ligands for the catalytic reaction of H 2 with D 2 to give HD. Here, we posit that the mechanism involving bridging hydride ligands facilitated by oxygen ligands remote from the catalytic site may have some generality in catalysis by oxide-supported noble metals.

02 PETROLEUM↗

Mechanism of Ni-Catalyzed Photochemical Halogen Atom-Mediated C(sp 3 )–H Arylation

Within the context of Ni photoredox catalysis, halogen atom photoelimination from Ni has emerged as a fruitful strategy for enabling hydrogen atom transfer (HAT)-mediated C(sp 3 )–H functionalization. Despite the numerous synthetic transformations invoking this paradigm, a unified mechanistic hypothesis that is consistent with experimental findings on the catalytic systems and accounts for halogen radical formation and facile C(sp 2 )–C(sp 3 ) bond formation remains elusive. We employ kinetic analysis, organometallic synthesis, and computational investigations to decipher the mechanism of a prototypical Ni-catalyzed photochemical C(sp 3 )–H arylation reaction. Our findings revise the previous mechanistic proposals, first by examining the relevance of SET and EnT processes from Ni intermediates relevant to the HAT-based arylation reaction. Our investigation highlights the ability for blue light to promote efficient Ni–C(sp 2 ) bond homolysis from cationic Ni III and C(sp 2 )–C(sp 3 ) reductive elimination from bipyridine Ni II complexes. However interesting, the rates and selectivities of these processes do not account for the productive catalytic pathway. Instead, our studies support a mechanism that involves halogen atom evolution from in situ generated Ni II dihalide intermediates, radical capture by a Ni II (aryl)(halide) resting state, and key C–C bond formation from Ni III . Oxidative addition to Ni I , as opposed to Ni 0 , and rapid Ni III /Ni I comproportionation play key roles in this process. Furthermore, the findings presented herein offer fundamental insight into the reactivity of Ni in the broader context of catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Crystal Structure of GXGD Membrane Protease FlaK

The GXGD proteases are polytopic membrane proteins with catalytic activities against membrane-spanning substrates that require a pair of aspartyl residues. Representative members of the family include preflagellin peptidase, type 4 prepilin peptidase, presenilin and signal peptide peptidase. Many GXGD proteases are important in medicine. For example, type 4 prepilin peptidase may contribute to bacterial pathogenesis, and mutations in presenilin are associated with Alzheimer's disease. As yet, there is no atomic-resolution structure in this protease family. Here we report the crystal structure of FlaK, a preflagellin peptidase from Methanococcus maripaludis, solved at 3.6 {angstrom} resolution. The structure contains six transmembrane helices. The GXGD motif and a short transmembrane helix, helix 4, are positioned at the centre, surrounded by other transmembrane helices. The crystal structure indicates that the protease must undergo conformational changes to bring the GXGD motif and a second essential aspartyl residue from transmembrane helix 1 into close proximity for catalysis. A comparison of the crystal structure with models of presenilin derived from biochemical analysis reveals three common transmembrane segments that are similarly arranged around the active site. This observation reinforces the idea that the prokaryotic and human proteases are evolutionarily related. The crystal structure presented here provides a framework for understanding the mechanism of the GXGD proteases, and may facilitate the rational design of inhibitors that target specific members of the family.

59 BASIC BIOLOGICAL SCIENCES↗

Scalable synthesis and post-modification of a mesoporous metal-organic framework called NU-1000

The synthesis of NU-1000, a highly robust mesoporous (containing pores >2 nm) metal-organic framework (MOF), can be conducted efficiently on a multigram scale from inexpensive starting materials. Tetrabromopyrene and (4-(ethoxycarbonyl)phenyl)boronic acid can easily be coupled to prepare the requisite organic strut with four metal-binding sites in the form of four carboxylic acids, while zirconyl chloride octahydrate is used as a precursor for the well-defined metal oxide clusters. NU-1000 has been reported as an excellent candidate for the separation of gases, and it is a versatile scaffold for heterogeneous catalysis. In particular, it is ideal for the catalytic deactivation of nerve agents, and it shows great promise as a new generic platform for a wide range of applications. Multiple post-synthetic modification protocols have been developed using NU-1000 as the parent material, making it a potentially useful scaffold for several catalytic applications. The procedure for the preparation of NU-1000 can be scaled up reliably, and it is suitable for the production of 50 g of the tetracarboxylic acid containing organic linker and 200 mg–2.5 g of NU-1000. The entire synthesis is performed without purification by column chromatography and can be completed within 10 d.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Basis for Allosteric Regulation of Human Ribonucleotide Reductase by Nucleotide-induced Oligomerization

Ribonucleotide reductase (RR) is an {alpha}{sub n}{beta}{sub n} (RR1-RR2) complex that maintains balanced dNTP pools by reducing NDPs to dNDPs. RR1 is the catalytic subunit, and RR2 houses the free radical required for catalysis. RR is allosterically regulated by its activator ATP and its inhibitor dATP, which regulate RR activity by inducing oligomerization of RR1. Here, we report the first X-ray structures of human RR1 bound to TTP alone, dATP alone, TTP-GDP, TTP-ATP, and TTP-dATP. These structures provide insights into regulation of RR by ATP or dATP. At physiological dATP concentrations, RR1 forms inactive hexamers. We determined the first X-ray structure of the RR1-dATP hexamer and used single-particle electron microscopy to visualize the {alpha}{sub 6}-{beta}{beta}'-dATP holocomplex. Site-directed mutagenesis and functional assays confirm that hexamerization is a prerequisite for inhibition by dATP. Our data indicate a mechanism for regulating RR activity by dATP-induced oligomerization.

59 BASIC BIOLOGICAL SCIENCES↗

Accessing monomers from lignin through carbon–carbon bond cleavage

Lignin, the heterogeneous aromatic macromolecule found in the cell walls of vascular plants, is an abundant feedstock for the production of biochemicals and biofuels. Here, many valorization schemes rely on lignin depolymerization, with decades of research focused on accessing monomers through C–O bond cleavage, given the abundance of β–O–4 bonds in lignin and the large number of available C–O bond cleavage strategies. Monomer yields are, however, invariably lower than desired, owing to the presence of recalcitrant C–C bonds whose selective cleavage remains a major challenge in catalysis. In this Review, we highlight lignin C–C cleavage reactions, including those of linkages arising from biosynthesis (β–1, β–5, β–β and 5–5) and industrial processing (5–CH 2 –5 and α–5). We examine multiple approaches to C–C cleavage, including homogeneous and heterogeneous catalysis, photocatalysis and biocatalysis, to identify promising strategies for further research and provide guidelines for definitive measurements of lignin C–C bond cleavage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A heterogeneous iridium single-atom-site catalyst for highly regioselective carbenoid O–H bond insertion

Transition-metal-catalysed carbenoid insertion of hydroxyl groups represents a robust and versatile method to forge C–O bonds. Achieving site-selective functionalization of alcohols using this transformation has undoubted synthetic value but remains challenging. Here we report a strategy for selective carbenoid O–H insertion that exploits an engineered heterogeneous iridium single-atom catalyst, thus providing opportunities for organic transformations by merging material science and catalysis. This catalytic protocol delivers excellent selectivities (up to 99:1) for the functionalization of aliphatic over phenolic O–H bonds, whereas the analogous homogeneous catalyst, Ir(ttp)COCl (ttp = 5,10,15,20-tetra-p-tolylporphyrinato), provided modest preferences. Density-functional-theory calculations suggest that the site-selectivity derives from the lower oxidation state of the iridium metal centre in the heterogeneous catalyst and its impact on the absorption energies of the reactants. These results showcase an example of a heterogeneous single-atom catalyst providing superior site-selectivity and provide a complementary strategy to address challenges in catalysis for organic synthesis. [Figure not available: see fulltext.]

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Biochemical Studies on the Regulation of Biotin Carboxylase by Substrate Inhibition and Dimerization

Biotin carboxylase (BC) activity is shared among biotin-dependent carboxylases and catalyzes the Mg-ATP-dependent carboxylation of biotin using bicarbonate as the CO{sub 2} donor. BC has been studied extensively over the years by structural, kinetic, and mutagenesis analyses. Here we report three new crystal structures of Escherichia coli BC at up to 1.9 {angstrom} resolution, complexed with different ligands. Two structures are wild-type BC in complex with two ADP molecules and two Ca{sup 2+} ions or two ADP molecules and one Mg{sup 2+} ion. One ADP molecule is in the position normally taken by the ATP substrate, whereas the other ADP molecule occupies the binding sites of bicarbonate and biotin. One Ca{sup 2+} ion and the Mg{sup 2+} ion are associated with the ADP molecule in the active site, and the other Ca{sup 2+} ion is coordinated by Glu-87, Glu-288, and Asn-290. Our kinetic studies confirm that ATP shows substrate inhibition and that this inhibition is competitive against bicarbonate. The third structure is on the R16E mutant in complex with bicarbonate and Mg-ADP. Arg-16 is located near the dimer interface. The R16E mutant has only a 2-fold loss in catalytic activity compared with the wild-type enzyme. Analytical ultracentrifugation experiments showed that the mutation significantly destabilized the dimer, although the presence of substrates can induce dimer formation. The binding modes of bicarbonate and Mg-ADP are essentially the same as those to the wild-type enzyme. However, the mutation greatly disrupted the dimer interface and caused a large re-organization of the dimer. The structures of these new complexes have implications for the catalysis by BC.

59 BASIC BIOLOGICAL SCIENCES↗

Structural insight into nucleotide recognition by human death-associated protein kinase

Death-associated protein kinase (DAPK) is a member of the Ca{sup 2+}/calmodulin-regulated family of serine/threonine protein kinases. The role of the kinase activity of DAPK in eukaryotic cell apoptosis and the ability of bioavailable DAPK inhibitors to rescue neuronal death after brain injury have made it a drug-discovery target for neurodegenerative disorders. In order to understand the recognition of nucleotides by DAPK and to gain insight into DAPK catalysis, the crystal structure of human DAPK was solved in complex with ADP and Mg{sup 2+} at 1.85 {angstrom} resolution. ADP is a product of the kinase reaction and product release is considered to be the rate-limiting step of protein kinase catalytic cycles. The structure of DAPK-ADP-Mg{sup 2+} was compared with a newly determined DAPK-AMP-PNP-Mg{sup 2+} structure and the previously determined apo DAPK structure (PDB code 1 jks). The comparison shows that nucleotide-induced changes are localized to the glycine-rich loop region of DAPK.

36 MATERIALS SCIENCE↗

Crystal Structure of a Self-Spliced Group II Intron

Group II introns are self-splicing ribozymes that catalyze their own excision from precursor transcripts and insertion into new genetic locations. Here we report the crystal structure of an intact, self-spliced group II intron from Oceanobacillus iheyensis at 3.1 angstrom resolution. An extensive network of tertiary interactions facilitates the ordered packing of intron subdomains around a ribozyme core that includes catalytic domain V. The bulge of domain V adopts an unusual helical structure that is located adjacent to a major groove triple helix (catalytic triplex). The bulge and catalytic triplex jointly coordinate two divalent metal ions in a configuration that is consistent with a two-metal ion mechanism for catalysis. Structural and functional analogies support the hypothesis that group II introns and the spliceosome share a common ancestor.

60 APPLIED LIFE SCIENCES↗

State of the Art in Thermal Catalytic Upgrading of Biomass and Biomass-Derived Intermediates

Biomass-derived energy sources represent a promising domestic route for fuel and chemical production, taking advantage of largely underutilized biological and waste resources. Heterogeneous catalysis plays a key role in these biomass conversion processes, as reflected by all American Society for Testing and Materials–approved pathways for producing sustainable aviation fuel proceeding through a catalytic step. This concise review seeks to establish the state of the art in thermal catalytic process development for various biomass-derived feedstocks and the current enabling capabilities that aid this development. Research needs are identified and described throughout the article, as further advancements in heterogeneous catalysis are required to improve the affordability and realize the full potential of biomass-derived products.

09 BIOMASS FUELS↗

Data for Photoenzymatic Stereoablative Enantioconvergence of γ-chiral Oximes via Hydrogen Atom Transfer

Producing enantioenriched molecules from racemic mixtures is essential for manufacturing. Traditional methods such as resolution, deracemization and enantioconvergent catalysis primarily involve separating or converting enantiomers without altering their structures, or functionalization of stereocentres at or proximal to functional groups. However, there are challenges in enantioselectively forging C–H bonds that are remote from functional groups via hydrogen atom transfer (HAT) with these methods. Here we introduce a strategy for the photoenzymatic stereoablative enantioconvergence of γ-chiral oximes using repurposed flavin-dependent ene-reductases. A photoinduced single-electron reduction of the γ-chiral oxime by an ene-reductase generates an iminyl radical, which then undergoes stereoablative 1,5-HAT at the γ-stereocentre. Subsequent chiral reconstruction through enzymatic HAT and spontaneous imine hydrolysis yields the γ-chiral ketone with high enantioselectivity. This work provides a robust method for remote stereoablative enantioconvergent HAT and broadens the synthetic utility of photobiocatalysis.

Bioproducts↗

Catalysts for emerging energy applications

Catalysis is the essential technology for chemical transformation, including production of fuels from the fossil resources petroleum, natural gas, and coal. Typical catalysts for these conversions are robust porous solids incorporating metals, metal oxides, and/or metal sulfides. As efforts are stepping up to replace fossil fuels with biomass, new catalysts for the conversion of the components of biomass will be needed. Although the catalysts for biomass conversion might be substantially different from those used in the conversion of fossil feedstocks, the latter catalysts are a starting point in today's research. Major challenges lie ahead in the discovery of efficient biomass conversion catalysts, as well as in the discovery of catalysts for conversion of CO{sub 2} and possibly water into liquid fuels. 16 refs., 6 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

First Principles Investigations for the Ensemble Effects of PdAu and PtAu Bimetallic Nanocatalysts (Final Technical Report)

Bimetallic surfaces with tunable chemical properties have attracted broad attention in recent years due to their ample potential for heterogeneous catalysis applications. The local chemical properties of constituents are strongly altered from their parent metals by 'ligand effect', a term encompassing the influences of charge transfer, orbital rehybridization and lattice strain. In comparison to the aforementioned, the 'ensemble effect' associated with particular arrangements of the active constituents have received much less attention, despite their notable importance towards the determination of reactivity and selectivity of bimetallic catalysts. We performed theoretical studies for understanding the ensemble effects on bimetallic catalysis: (i) simulations for the formation of different ensembles on PdAu and PtAu nanoclusters; (ii) studies of the size, shape, and substrate dependence of their electronic properties; and (iii) simulations for model reactions such as CO oxidation, methanol, ethylene and water dehydrogenation on PdAu and PtAu nanoclusters. In close collaboration with leading experimental groups, our theoretical research elucidated the fundamentals of Au based bimetallic nanocatalysts.

10 SYNTHETIC FUELS↗

Catalytic and Transport Behaviors of Model and Porous and Composite Nanostructures

As stressed in the Basic Energy Sciences Advisory Committee (BESAC) Report “New Science for a Secure and Sustainable Energy Future” (December 2008), solving our Nation’s energy challenges will entail more than incremental changes in present materials-related technologies; new, advanced routes to nanostructured materials with transformational properties will be required. Herein we describe the design and fabrication of a hybrid biotic/abiotic membrane reactor that, mimicking natural systems, employs the metalloenzyme, carbonic anhydrase, to separate CO 2 from N 2 with unprecedented purity and rate. The membrane design, synthesis, and operation are based on multiple biomimetic and nanoscale fabrication strategies, nanoscale dimensional features, and nanoscale physical phenomena, for example: 1) Bottom-up self-assembly of a membrane comprising a periodic, aligned, cylindrical nanopore array with 8 nm diameter pores designed to accommodate carbonic anhydrase (CA) enzymes 2) Top-down Atomic Layer Deposition (ALD) and plasma processing of the nanopore array to create 18nm deep (by 8nm in diameter) superhydrophilic pores bounded by hydrophobic/superhydrophobic interfaces 3) Formation of a continuous, defect free, ultra-thin (~18-nm thick) but strong water membrane by capillary condensation within the uniformly-sized, superhydrophilic nanopore array 4) Accommodation of CA within the water filled nanopore array (~2 CAs per hydrophilic pore channel) to achieve an effective CA concentration within the 18-nm thick water membrane over 10X greater than achievable in solution Exposed to a mixture of CO 2 and N 2 this biomimetic membrane rapidly and selectively dissolves CO 2 within the CA filled water nano-channels on the ‘upstream side’ and regenerates CO 2 at the superhydrophobic interface on the ‘downstream’ side. In combination, the high CA concentration and exceptionally short diffusion distances enable rapid and highly selective CO 2 separation from N 2 and H 2 . Our membrane has a combined CO 2 flux and selectivity that exceed by orders of magnitude all existing CO 2 membranes and for the first time meet the US Department of Energy guidelines for CO 2 sequestration technologies. (The performance of our membrane was recognized by an R&D100 Award and the first R&D100 Green Technology Award in 2015 and an issued US Patent in 2017). We believe this membrane could be employed in combination with sequestration to help reduce greenhouse gas emissions and provide a viable, economically feasible pathway to achieve the goals of the 2016 Paris Accord, which aims to maintain a global temperature rise this century less than 2°C above pre-industrial levels. Further this membrane concept could be adapted to other enzymes to accomplish other separations of interest, e.g. H 2 . We also have established processing-structure-property relationships of ultrathin membrane-like monolayer materials that are intrinsically catalytic. Establishing processing-structure-property relationships for monolayer materials is crucial for a vast range of applications spanning optics, catalysis, electronics, and energy. Presently, for MoS 2 , a promising catalyst for artificial photosynthesis, considerable debate surrounds the structure/property relationships of its various allotropes. Using high-resolution transmission electron microscopy supported by density functional theory, we unambiguously solved the structure of MoS 2 monolayers and showed lithium intercalation to direct a preferential transformation of the basal plane from 2H (trigonal prismatic) to 1T’ (clustered Mo). These changes alter the energetics of MoS 2 interactions with hydrogen ((GH), and, with respect to catalysis, the 1T’ transformation renders the normally inert basal plane amenable towards hydrogen adsorption and H 2 evolution achieving Hydrogen Evolution Reaction (HER) catalytic activity comparable to 2H MoS 2 edges on Au(111), one of the most active HER catalysts known.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Development of Novel Supported Gold Catalysts: A Materials Perspective

Since Haruta et al. discovered that small gold nanoparticles finely dispersed on certain metal oxide supports can exhibit surprisingly high activity in CO oxidation below room temperature, heterogeneous catalysis by supported gold nanoparticles has attracted tremendous attention. The majority of publications deal with the preparation and characterization of conventional gold catalysts (e.g., Au/TiO{sub 2}), the use of gold catalysts in various catalytic reactions, as well as elucidation of the nature of the active sites and reaction mechanisms. In this overview, we highlight the development of novel supported gold catalysts from a materials perspective. Examples, mostly from those reported by our group, are given concerning the development of simple gold catalysts with single metal-support interfaces and heterostructured gold catalysts with complicated interfacial structures. Catalysts in the first category include active Au/SiO{sub 2} and Au/metal phosphate catalysts, and those in the second category include catalysts prepared by pre-modification of supports before loading gold, by post-modification of supported gold catalysts, or by simultaneous dispersion of gold and an inorganic component onto a support. CO oxidation has generally been employed as a probe reaction to screen the activities of these catalysts. These novel gold catalysts not only provide possibilities for applied catalysis, but also furnish grounds for fundamental research.

36 MATERIALS SCIENCE↗