Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Algorithm testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

High-Impedance Non-Linear Fault Detection via Eigenvalue Analysis with low PMU Sampling Rates

This work presents a hybrid data-driven and physics-based framework for high-impedance fault detection in power systems. An innovative method based on eigenvalue analysis is expanded and validated. Phasor Measurement Unit data is used to estimate eigenvalues corresponding to the powerlines being monitored. The projection and drift of these eigenvalues is then tracked and evaluated. Faults are detected as they drive eigenvalues outside of their normal zones. Eigenvectors are leveraged to support and validate the decisions made by the main algorithm. This technique holds several advantages over contemporary techniques in that it utilizes technology that is already deployed in the field, it offers a significant degree of generality, and so far it has displayed a very high-level of sensitivity without sacrificing accuracy. Validation takes place in the form of simulations in the IEEE 13 Node System considering a popular high-impedance non-linear fault model. Test results are encouraging indicating potential for real-life applications.

Paramo, Gian↗
DOE OSTI2021

A New Class of AMG Interpolation Methods Based on Matrix-Matrix Multiplications

A new class of distance-two interpolation methods for algebraic multigrid (AMG) that can be formulated in terms of sparse matrix-matrix multiplications is presented and analyzed. Compared with similar distance-two prolongation operators, the proposed algorithms exhibit improved efficiency and portability to various computing platforms, since they allow one to easily exploit existing high-performance sparse matrix kernels. The new interpolation methods have been implemented in hypre, a widely used parallel multigrid solver library. With the proposed interpolations, the overall time of hypre's BoomerAMG setup can be considerably reduced, while sustaining equivalent, sometimes improved, convergence rates. Numerical results for a variety of test problems on parallel machines are presented that support the superiority of the proposed interpolation operators over the existing ones in hypre.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Frost prediction using machine learning and deep neural network models

This study describes accurate, computationally efficient models that can be implemented for practical use in predicting frost events for point-scale agricultural applications. Frost damage in agriculture is a costly burden to farmers and global food security alike. Timely prediction of frost events is important to reduce the cost of agricultural frost damage and traditional numerical weather forecasts are often inaccurate at the field-scale in complex terrain. In this paper, we developed machine learning (ML) algorithms for the prediction of such frost events near Alcalde, NM at the point-scale. ML algorithms investigated include deep neural network, convolution neural networks, and random forest models at lead-times of 6–48 h. Our results show promising accuracy (6-h prediction RMSE = 1.53–1.72°C) for use in frost and minimum temperature prediction applications. Seasonal differences in model predictions resulted in a slight negative bias during Spring and Summer months and a positive bias in Fall and Winter months. Additionally, we tested the model transferability by continuing training and testing using data from sensors at a nearby farm. We calculated the feature importance of the random forest models and were able to determine which parameters provided the models with the most useful information for predictions. We determined that soil temperature is a key parameter in longer term predictions (>24 h), while other temperature related parameters provide the majority of information for shorter term predictions. The model error compared favorable to previous ML based frost studies and outperformed the physically based High Resolution Rapid Refresh forecasting system making our ML-models attractive for deployment toward real-time monitoring of frost events and damage at commercial farming operations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Selection of high-redshift Lyman-Break Galaxies from broadband and wide photometric surveys

In this paper, we investigate the possibility of selecting high-redshift Lyman-Break Galaxies (LBG) using current and future broadband wide photometric surveys, such as the Ultraviolet Near Infrared Optical Northern Survey (UNIONS) or the Vera C. Rubin Legacy Survey of Space and Time (LSST), using a Random Forest algorithm. This work is conducted in the context of future large-scale structure spectroscopic surveys like DESI-II, the next phase of the Dark Energy Spectroscopic Instrument (DESI), which will start around 2029.We use deep imaging data from the Hyper Suprime Camera (HSC) and the Canada-France-Hawaii Telescope Large Area U-band Deep Survey (CLAUDS) on the COSMOS and XMM-LSS fields. To predict the selection performance of LBGs with image quality similar to UNIONS, we degrade the u,g,r,i and z bands to UNIONS depth.The Random Forest algorithm is trained with the u,g,r,i and z bands to classify LBGs in the 2.5 < z < 3.5 range.We find that fixing a target density budget of 1,100 deg$^{-2}$, the Random Forest approach gives a density of z > 2 targets of 873 deg$^{-2}$, and a density of 493 deg$^{-2}$ of confirmed LBGs after spectroscopic confirmation with DESI. This UNIONS-like selection was tested in a dedicated spectroscopic observation campaign of 1,000 targets with DESI on the COSMOS field, providing a safe spectroscopic sample with a mean redshift of 3. This sample is used to derive forecasts for DESI-II, assuming a sky coverage of 5,000 deg$^{2}$. We predict uncertainties on Alcock-Paczynski parameters α$_{⊥}$ and α$_{∥}$ to be 0.7% and 1% for 2.6 < z < 3.2, resulting in a potential 2% measurement of the dark energy fraction at high redshift. Additionally, we estimate the uncertainty in local non-Gaussianity and predict σ$_{fNL}$ ≈ 7, which would be comparable to the current best precision achieved by Planck. The latter forecast suggests that achieving the precision required to place stringent constraints on inflationary models (σ$_{fNL}$ ≈ 1) using spectroscopic galaxy surveys necessitates the development of a next-generation (Stage V) spectroscopic survey.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Tutorial: Machine Learning and Artificial Intelligence in Batteries

Machine learning (ML) promises to compress the time needed to characterize battery performance, lifetime and safety. By coupling ML with physical models and metrics, that learning can bridge across materials, chemistries and cell designs. This tutorial will discuss the most popular ML techniques and resources and review recent work in the electrochemical literature. Applications include materials discovery, image recognition for quantitative microscopy analysis, fast charge algorithm development and life prediction.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Instantaneous tracking of earthquake growth with elastogravity signals

Rapid and reliable estimation of large earthquake magnitude (above 8) is key to mitigating the risks associated with strong shaking and tsunamis. Standard early warning systems based on seismic waves fail to rapidly estimate the size of such large earthquakes. Geodesy-based approaches provide better estimations, but are also subject to large uncertainties and latency associated with the slowness of seismic waves. Recently discovered speed-of-light prompt elastogravity signals (PEGS) have raised hopes that these limitations may be overcome, but have not been tested for operational early warning. Here we show that PEGS can be used in real time to track earthquake growth instantaneously after the event reaches a certain magnitude. We develop a deep learning model that leverages the information carried by PEGS recorded by regional broadband seismometers in Japan before the arrival of seismic waves. After training on a database of synthetic waveforms augmented with empirical noise, we show that the algorithm can instantaneously track an earthquake source time function on real data. Our model unlocks ‘true real-time’ access to the rupture evolution of large earthquakes using a portion of seismograms that is routinely treated as noise, and can be immediately transformative for tsunami early warning.

58 GEOSCIENCES↗
DOE OSTI2025

Selection of high-redshift Lyman-Break Galaxies from broadband and wide photometric surveys

Here, in this paper, we investigate the possibility of selecting high-redshift Lyman-Break Galaxies (LBG) using current and future broadband wide photometric surveys, such as the Ultraviolet Near Infrared Optical Northern Survey (UNIONS) or the Vera C. Rubin Legacy Survey of Space and Time (LSST), using a Random Forest algorithm. This work is conducted in the context of future large-scale structure spectroscopic surveys like DESI-II, the next phase of the Dark Energy Spectroscopic Instrument (DESI), which will start around 2029. We use deep imaging data from the Hyper Suprime Camera (HSC) and the Canada-France-Hawaii Telescope Large Area U-band Deep Survey (CLAUDS) on the COSMOS and XMM-LSS fields. To predict the selection performance of LBGs with image quality similar to UNIONS, we degrade the u,g,r,i and z bands to UNIONS depth. The Random Forest algorithm is trained with the u,g,r,i and z bands to classify LBGs in the 2.5 < z < 3.5 range. We find that fixing a target density budget of 1,100 deg -2 , the Random Forest approach gives a density of z > 2 targets of 873 deg -2 , and a density of 493 deg -2 of confirmed LBGs after spectroscopic confirmation with DESI. This UNIONS-like selection was tested in a dedicated spectroscopic observation campaign of 1,000 targets with DESI on the COSMOS field, providing a safe spectroscopic sample with a mean redshift of 3. This sample is used to derive forecasts for DESI-II, assuming a sky coverage of 5,000 deg 2 . We predict uncertainties on Alcock-Paczynski parameters α ⊥ and α ∥ to be 0.7% and 1% for 2.6 < z < 3.2, resulting in a potential 2% measurement of the dark energy fraction at high redshift. Additionally, we estimate the uncertainty in local non-Gaussianity and predict σ fNL ≈ 7, which would be comparable to the current best precision achieved by Planck. The latter forecast suggests that achieving the precision required to place stringent constraints on inflationary models (σ fNL ≈ 1) using spectroscopic galaxy surveys necessitates the development of a next-generation (Stage V) spectroscopic survey.

cosmological parameters from LSS↗
DOE OSTI2021

Efficient Sampling of Complex Interdependent and Multiplex Networks

Efficient sampling of interdependent and multiplex infrastructure networks is critical for effectively applying failure and recovery algorithms in real-world settings, as well as to generate property-preserving reduced-order graph-based ensembles that address topological uncertainties. In this paper, we first explore the performance, i.e. the success in preserving graph properties, of graph sampling algorithms for interdependent and multiplex networks with synthetic and real-world graphs. We simulate sampling algorithms under different parameter settings. These settings include probabilistic graph generators, coupling patterns, and various performance metrics. Our results show that while Random Node and Random Walk sampling algorithms perform best for interdependent networks, Random Edge and Forest Fire sampling algorithms perform best for multiplex networks. Second, we propose and implement a novel similarity-based sampling algorithm for multiplex networks that samples only log(N) number of layers of an N-layer multiplex network while yielding computational savings with performance guarantees. Experimental results show that similarity sampling outperforms complete sampling of all layers while decreasing performance costs from a linear scale to a logarithmic one. Our results also indicate that similarity-based sampling outperforms complete sampling and random selection in nearly all scenarios when tested with real-world data.

Subasi, Omer↗
DOE OSTI2021

A machine learning approach to galaxy properties: joint redshift–stellar mass probability distributions with Random Forest

We demonstrate that highly accurate joint redshift–stellar mass probability distribution functions (PDFs) can be obtained using the Random Forest (RF) machine learning (ML) algorithm, even with few photometric bands available. As an example, we use the Dark Energy Survey (DES), combined with the COSMOS2015 catalogue for redshifts and stellar masses. We build two ML models: one containing deep photometry in the griz bands, and the second reflecting the photometric scatter present in the main DES survey, with carefully constructed representative training data in each case. We validate our joint PDFs for 10 699 test galaxies by utilizing the copula probability integral transform and the Kendall distribution function, and their univariate counterparts to validate the marginals. Benchmarked against a basic set-up of the template-fitting code bagpipes, our ML-based method outperforms template fitting on all of our predefined performance metrics. In addition to accuracy, the RF is extremely fast, able to compute joint PDFs for a million galaxies in just under 6 min with consumer computer hardware. Such speed enables PDFs to be derived in real time within analysis codes, solving potential storage issues. As part of this work we have developed galpro 1, a highly intuitive and efficient python package to rapidly generate multivariate PDFs on-the-fly. galpro is documented and available for researchers to use in their cosmology and galaxy evolution studies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Hardware-in-the-Loop Evaluation of Grid-Edge DER Chip Integration Into Next-Generation Smart Meters

To facilitate the implementation of distributed energy resource management systems (DERMS), we propose to insert a grid-edge distributed energy resource (DER) chip hosting a DERMS algorithm into the next generation of smart meters. This will create a pathway for the wide adoption of DERMS technology because many utilities plan to invest in advanced metering infrastructure in the near future. This will also bridge the gap between an electrical power utility and DERs behind the meter. The DER chip is designed to follow power direction signals from the DERMS coordinator while balancing its local objectives. We tested the chip using a controller- and power-hardware-in-the-loop evaluation under three scenarios that a DERMS could face in the real world. The DER chip was capable of and effective at directing four heterogeneous DERs to respond to a DERMS coordinator for grid services (e.g., voltage regulation and a virtual power plant).

distributed energy resource management system↗
DOE OSTI2023

Estimation of Arrivals on Green at Signalized Intersections Using Stop-Bar Video Detection

Across the world, traffic congestion is increasing with alarming rapidity. Traffic signal control effectiveness, in coordinated networks, is often investigated in relation to the type of vehicle arrivals at the signalized intersections. Recently, several transportation agencies have switched from traditional loop detectors to video detection. When video cameras are accompanied by computer vision, one can extract more information about traffic “dynamics” than by using traditional inductive loop detectors. Collecting arrival times of multiple vehicles after the first arrival at the stop-bar detector might be challenging when using inductive loop detectors (since after the first arrival, detector status is always occupied). However, emerging video detection systems allow tracking of each vehicle’s entrance time in the detection zone, departure time from the detection zone, and the type of vehicle. This information can be used to estimate vehicular arrival and departure times, which then can be fed into machine learning algorithms to estimate arrivals on green (AOG). However, such research ideas have not been documented so far. Thus, this paper presents an estimation model for AOG, which was developed using multigene genetic programming. A robust experimental dataset was collected from a highly calibrated and validated microsimulation model of an 11-intersection corridor in Chattanooga, TN. The results of the model’s performance analysis showed the high accuracy of the training-, testing-, and validation datasets. The practical benefit of this model is that it can be applied to estimate arrival types at intersections where only stop-bar video detection exists.

Engineering↗
DOE OSTI2020

P finder: genomic and metagenomic annotation of RNase P RNA gene (rnpB)

Abstract Background The rnpB gene encodes for an essential catalytic RNA (RNase P). Like other essential RNAs, RNase P’s sequence is highly variable. However, unlike other essential RNAs (i.e. tRNA, 16 S, 6 S,...) its structure is also variable with at least 5 distinct structure types observed in prokaryotes. This structural variability makes it labor intensive and challenging to create and maintain covariance models for the detection of RNase P RNA in genomic and metagenomic sequences. The lack of a facile and rapid annotation algorithm has led to the rnpB gene being the most grossly under annotated essential gene in completed prokaryotic genomes with only a 24% annotation rate. Here we describe the coupling of the largest RNase P RNA database with the local alignment scoring algorithm to create the most sensitive and rapid prokaryote rnpB gene identification and annotation algorithm to date. Results Of the 2772 completed microbial genomes downloaded from GenBank only 665 genomes had an annotated rnpB gene. We applied P Finder to these genomes and were able to identify 2733 or nearly 99% of the 2772 microbial genomes examined. From these results four new rnpB genes that encode the minimal T-type P RNase P RNAs were identified computationally for the first time. In addition, only the second C-type RNase P RNA was identified in Sphaerobacter thermophilus . Of special note, no RNase P RNAs were detected in several obligate endosymbionts of sap sucking insects suggesting a novel evolutionary adaptation. Conclusions The coupling of the largest RNase P RNA database and associated structure class identification with the P Finder algorithm is both sensitive and rapid, yielding high quality results to aid researchers annotating either genomic or metagenomic data. It is the only algorithm to date that can identify challenging RNAse P classes such as C-type and the minimal T-type RNase P RNAs. P Finder is written in C# and has a user-friendly GUI that can run on multiple 64-bit windows platforms (Windows Vista/7/8/10). P Finder is free available for download at https://github.com/JChristopherEllis/P-Finder as well as a small sample RNase P RNA file for testing.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Learning to Optimize Variational Quantum Circuits to Solve Combinatorial Problems

Quantum computing is a computational paradigm with the potential to outperform classical methods for a variety of problems. Proposed recently, the Quantum Approximate Optimization Algorithm (QAOA) is considered as one of the leading candidates for demonstrating quantum advantage in the near term. QAOA is a variational hybrid quantum-classical algorithm for approximately solving combinatorial optimization problems. The quality of the solution obtained by QAOA for a given problem instance depends on the performance of the classical optimizer used to optimize the variational parameters. In this paper, we formulate the problem of finding optimal QAOA parameters as a learning task in which the knowledge gained from solving training instances can be leveraged to find high-quality solutions for unseen test instances. To this end, we develop two machine-learning-based approaches. Our first approach adopts a reinforcement learning (RL) framework to learn a policy network to optimize QAOA circuits. Our second approach adopts a kernel density estimation (KDE) technique to learn a generative model of optimal QAOA parameters. In both approaches, the training procedure is performed on small-sized problem instances that can be simulated on a classical computer; yet the learned RL policy and the generative model can be used to efficiently solve larger problems. Furthermore, extensive simulations using the IBM Qiskit Aer quantum circuit simulator demonstrate that our proposed RL- and KDE-based approaches reduce the optimality gap by factors up to 30.15 when compared with other commonly used off-the-shelf optimizers.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Hardware-in-the-Loop Evaluation of Grid-Edge DER Chip Integration Into Next-Generation Smart Meters: Preprint

To facilitate the implementation of distributed energy resource management systems (DERMS), we propose to insert a grid-edge distributed energy resource (DER) chip hosting a DERMS algorithm into the next generation of smart meters. This will create a pathway for the wide adoption of DERMS technology because many utilities plan to invest in advanced metering infrastructure in the near future. This will also bridge the gap between an electrical power utility and DERs behind the meter. The DER chip is designed to follow power direction signals from the DERMS coordinator while balancing its local objectives. We tested the chip using a controller- and power-hardware-in-the-loop evaluation under three scenarios that a DERMS could face in the real world. The DER chip was capable of and effective at directing four heterogeneous DERs to respond to a DERMS coordinator for grid services (e.g., voltage regulation and a virtual power plant).

distributed energy resource management system↗
DOE OSTI2025

Multi-physics Topology OPtimization and Additive Manufacturing for High-temperature Heat Exchangers

This research significantly advances the understanding of high-temperature heat exchanger design through an integrated approach that combines topology optimization (TO), triply periodic minimal surface (TPMS) structures, additive manufacturing (AM) and thermohydraulic testing. Each of these components contributes uniquely to a unified, high-performance design, fabrication and testing workflow. Topology optimization serves as the foundation of the design methodology by providing a systematic way to determine the most effective material layout for separating hot and cold fluids while maximizing thermal performance. The researchers introduced a novel three-material optimization framework using two density fields to represent hot fluid, cold fluid, and solid domains. This approach enables automated discovery of optimal shapes and flow paths that cannot be intuitively designed, especially under constraints imposed by manufacturing technologies. Furthermore, constraints such as minimal wall thickness and overhang angles were embedded into the optimization process, ensuring that resulting designs are not only thermally efficient but also manufacturable using modern additive techniques. In parallel, the study delves into the use of Gyroid-based TPMS geometries for constructing the core of the heat exchanger. TPMS structures are known for their high surface area, excellent fluid mixing capabilities, and minimal pressure drop characteristics. The researchers applied a data-driven modeling framework using Heteroscedastic Sparse Gaussian Process Regression (HSGPR) combined with genetic algorithms. This allowed for the rapid evaluation and optimization of key geometric parameters such as frequency, iso-value, and phase shift. The result was a set of Gyroid structures tailored for high heat transfer and low flow resistance, demonstrating clear improvements over conventional straight-channel designs. After the designing process, additive manufacturing played a critical role by turning these highly complex, optimized geometries into physical components. Utilizing Laser Powder Bed Fusion (LPBF) with Haynes 282, the study demonstrated the feasibility of fabricating these heat exchangers at high precision. Post-processing methods, including dilation-erosion operations, were applied to ensure local features adhered to self-supporting constraints. The fabricated structures were then subjected to thermohydraulic testing under conditions representative of supercritical CO 2 Brayton cycles, validating the predicted performance and confirming the viability of the full design-to-fabrication pipeline. Finally, thermohydraulic testing across the above studies served as a crucial experimental validation of advanced heat exchanger. Under consistent high-temperature and high-pressure conditions using supercritical CO 2 , the testing demonstrated that both TO and Gyroid-based TPMS designs significantly outperformed conventional straight-channel HXs. The TO design achieved a 115% increase in UA and NTU and a 27.6% boost in gravimetric power density, while the data-driven optimized Gyroid design delivered a 166% increase in UA and NTU and improved effectiveness from 68.7% to 86.1%. These results validate the simulation models, confirm the manufacturability of complex geometries under AM constraints, and provide key insights into design-performance trade-offs, thereby advancing the development of high-efficiency, compact heat exchangers for extreme environments.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Q-POP-Thermo: A general-purpose thermodynamics solver for ferroelectric materials

We report that Q-POP-Thermo is a program designed to compute thermodynamic monodomain equilibrium states and their properties for ferroelectric single crystals and thin films based on the Landau-Ginzburg-Devonshire (LGD) Theory. Utilizing symbolic manipulation with the SymPy Library, the governing equations along with appropriate boundary conditions are solved for speedy minimization of the free energy of a crystal. Utilizing the popular Differential Evolution algorithm, with appropriate hybridization, multiple phase diagrams, such as the pressure-temperature phase diagram for bulk single crystals and the common strain-temperature phase diagram for monodomain thin-film systems can be readily generated. Furthermore, a variety of material properties of stable ferroelectric phases, including dielectric, piezoelectric, and electrocaloric properties, can simultaneously be calculated. Validation studies are presented for both thin-film and single crystal systems to test the effectiveness and capability of the open-source program.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

A Scalable Semi-Implicit Barotropic Mode Solver for the MPAS-Ocean

A scalable semi-implicit barotropic mode solver for the ocean component of the model for prediction across scales has been implemented as a competitor to an existing explicit-subcycling scheme to allow faster and more stable simulations while not sacrificing accuracy. The semi-implicit solver adopts the pipelined preconditioned bi-conjugate gradient stabilization algorithm as an iterative solver in conjunction with the restricted additive Schwarz preconditioner that accelerates the convergence rate of the iterative solver. The preconditioner is constructed from a linearized barotropic system that also reorders the system for optimal performance, while the semi-implicit solver deals with the fully nonlinear barotropic system that requires reassembly of the coefficient matrix for every time step. Several numerical experiments, from simple one-dimensional tests to three-dimensional real-world tests, demonstrate that the semi-implicit solver has almost the same accuracy and better parallel scalability compared with the existing scheme while allowing faster and more stable simulations. Furthermore, the semi-implicit solver accelerates the barotropic mode up to 2.9 times faster than the existing scheme on 16,320 processors, leading to an overall runtime speedup of 1.9.

97 MATHEMATICS AND COMPUTING↗