Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATTITUDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Orbit keeping attitude control for space station

It is pointed out that on-orbit configuration variability is expected to be a characteristic of a space station. The implementation of such a chracteristic will present reboost and thruster control system designers with a number of new challenges. The primary requirement for the space station orbit reboost (or orbit keeping) system is to ensure system viability for extended duration and prevent an uncontrolled reentry as with Skylab. For a station in a low earth orbit, earodynamic drag will be sufficient to cause relatively quick orbit altitude decay. A propulsion system is, therefore, needed to counteract the aerodynamic drag forces and to boost the vehicle to the desired orbit altitudes. A description is given of a typical reboost operational procedure and propellant requirements. Attention is given to thruster control systems, and aspects of reboost guidance.

Barrows, D.↗

Space Station Attitude Control System Concept and Requirements

There is currently no single Space Station configuration which is accepted as a baseline. However, the latest approach is toward symmetry in both geometry and mass distribution. This minimizes aerodynamic and gravity gradient torques. Solar arrays and radiators drive the configuration strongly. One axis of the solar arrays needs to be perpendicular to the orbit plane, and the geometric and principal axis should remain common along this axis to minimize secular torques. The need for both inertial and earth-fixed modes drives the structure of the Station toward a disk-like shape in the orbital plane.

Nicaise, P. D.↗

Attitude, control and stabilization

In the area of control, several problems can arise during the evolution of the space station. These incude: 1) the use of multiple or articulated flexible bodies; 2) the need for distributed cntrol for maneuvering and maintaining altitude; 3) hierarchical control to automate and manage control systems; 4) structual control (from the standpoint of appendage stamping; isolation, and possible figure control); 5) cntrol position and orientation for component modules during construction (an evolutionary requirement); 6) control during docking and undocking operations; and 7) the normal requirements for stablity and control during systems operations. In addition, there are a number of key technology concerns, such as significant landing modes which tend to be closely spaced and distributed widely, distributed sensors and actuators which are collecated, and the wide distribution of landing modes that must be reduced from a dimensional standpoint.

Morais, B. G.↗

Exhibit D modular design attitude control system study

A dynamically equivalent four body approximation of the NASTRAN finite element model supplied for hybrid deployable truss to support the digital computer simulation of the ten body model of the flexible space platform that incorporates the four body truss model were investigated. Coefficients for sensitivity of state variables of the linearized model of the three axes rotational dynamics of the prototype flexible spacecraft were generated with respect to the model's parameters. Software changes required to accommodate addition of another rigid body to the five body model of the rotational dynamics of the prototype flexible spacecraft were evaluated.

Chichester, F.↗

Microprocessor based implementation of attitude and shape control of large space structures

The feasibility of off the shelf eight bit and 16 bit microprocessors to implement linear state variable feedback control laws and assessing the real time response to spacecraft dynamics is studied. The complexity of the dynamic model is described along with the appropriate software. An experimental setup of a beam, microprocessor system for implementing the control laws and the needed generalized software to implement any state variable feedback control system is included.

Reddy, A. S. S. R.↗

Global matrix of thermospheric density values for selected solar/geomagnetic conditions and spacecraft orbital attitudes

Presented are selected thermospheric/exospheric global mean and extreme density values computed between 130 and 1100 km altitude. These values were generated from the MSFC/J70 reference orbital atmospheric model using different input conditions of solar flux and geomagnetic index, ranging from low to peak. Typical magnitudes of day-night density changes are presented, as an example, for use in space vehicle orbital analyses.

Johnson, D. L.↗

Rationale for an experimental test for flexible space structure attitude control

The problems of large flexible spacecraft control are characterized by the infinite bandwidth of structural vibrations, which cannot be accounted for in the dynamic design model. This may lead to instability even, if ideal control hardware is assumed, which can be concluded from preceding numerical investigations. Additional performance limitations are expected to occur due to hardware constraints. A laboratory experiment is proposed to investigate the key problems in more detail. The test setup requirements being defined by the idealized control system are extremely high demanding a high speed processor and special hardware component developments. The test element is a wire suspended plate being controlled by an array processor via high performance sensors and actuators. First tests on component level indicate the feasibility of the system presently being developed.

Lange, T.↗

On the attitude motion of a self-excited rigid body

Leimanis (1965) has published a monograph, which contains Boedewadt's solution of Euler's equations of motion for a symmetric rigid body subject to a time-independent, self-excitement in a body-fixed direction. In addition, the monograph provided also Boedewadt's solution for the corresponding angles of rotation. It is pointed out that the solution of Euler's equations of motion provides a poor approximation to the problem of nearly symmetric rigid bodies in cases in which a high degree of accuracy (less than 1 percent error) is required. A much more accurate approximate solution has been provided by Longuski (1980). The result given by Leimanis in the case of the Eulerian angles is incorrect for arbitrary constant torques. The approximate solution given by Longuski, however, is extremely accurate and suitable for computer design work and error analysis of spacecraft performance. The present investigation is concerned with a review of the solutions and the specific regions of validity of the solution for the Eulerian angles.

Longuski, J. M.↗

Gibbs vector kinematics and inverse dynamics for decoupled spacecraft attitude maneuvers

By use of Gibbs vectors as kinematic variables, multi-axial spacecraft equations of rotational motion are shown to be globally and rationally feedback-equivalent to a set of unconstrained and decoupled harmonic oscillators, driven by generalized acceleration commands. Advantages over alternative formulations with Euler angles and quaternions are pointed out.

Dwyer, T. A. W., III↗

Infrared horizon sensor modeling for attitude determination and control - Analysis and mission experience

This paper summarizes the work of the Flight Dynamics Division of the National Aeronautics and Space Administration/Goddard Space Flight Center in analyzing and evaluating the performance of a variety of infrared horizon sensors on 12 spaceflight missions from 1973 to 1984. Earth infrared radiance modeling, using the LOWTRAN 5 Program, and the Horizon Radiance Modeling Utility are also described. Mission data are presented for Magsat and the Earth Radiation Budget Satellite, with analysis to assess the sensor modeling as well as cloud and sun interference effects. Recommendations are made regarding future directions for the infrared horizon technology.

Singhal, S. P.↗

Attitude and articulation control concepts for the Earth Observing System

A study of pointing requirements and control approaches for the Earth Observing System, EOS, is presented. The proposed instrument set includes several massive instruments with varied articulation requirements, and pointing control requirements in several cases tighter than 0.01 degrees. Approaches to multipayload control and stability are explored, including: (a) the use of interconnected but dynamically isolated payload modules on a large platform, each with independent inertial control, and (b) precision basebody control of smaller platforms, with momentum compensated articulation and on-orbit dynamic balancing of spin-scan instruments. Results from multibody spacecraft models highlight potential payload dynamic interaction problems and suggest the need for dynamic isolation and disturbance rejection control techniques.

Bell, C. E.↗

Development of a reaction wheel attitude control system for sounding rocket experiments and small Shuttle-based free flyers

A three-axis reaction wheel control system is currently under development. Initial emphasis is on a magnetic field reference, although the system is easily adaptable to other positional references, e.g., the gyroscopic. The system is housed in a skin section 17.25 inches in diameter and approximately 10 inches long. Current weight estimate is 75 pounds. An orthogonal triad of dc motors forms the basis of the system. Power is provided by silver-zinc cells and controlled by an 8-bit microprocessor. The control law is presented and the dynamical equations derived. Simulation results show that a payload with a roll MOI of 4.1 sl/sq ft and a transverse MOI of 20.3 sl/sq ft can typically be reoriented 90 degrees in 20-35 seconds, depending upon the initial body rates.

Ward, P. R.↗

Nonlinear adaptive attitude control of spacecraft

A model reference adaptive control law is presented for large angle rotational maneuvers of spacecraft using reaction jets. It is assumed that the various parameters of the spacecraft are completely unknown, and unknown but bounded disturbance torques are acting on the spacecraft. The controller includes a dynamic system in the feedback path. Simulation results are presented to show that fast, large angle rotational maneuvers can be performed using the adaptive controller in spite of uncertainty in the system.

Singh, Sahjendra N.↗

Exploring hypotheses in attitude control fault diagnosis

A system which analyzes telemetry and evaluates hypotheses to explain any anomalies that are observed is described. Results achieved from a sample set of failure cases are presented, followed by a brief discussion of the benefits derived from this approach.

Bell, Benjamin↗

Progress towards extreme attitude testing with Magnetic Suspension and Balance Systems

Progress is reported in a research effort aimed towards demonstration of the feasibility of suspension and aerodynamic testing of models at high angles of attack in wind tunnel Magnetic Suspension and Balance Systems. Extensive modifications, described in this paper, have been made to the Southampton University suspension system in order to facilitate this work. They include revision of electromagnet configuration, installation of all-new position sensors and expansion of control system programs. An angle of attack range of 0 to 90 deg is expected for axisymmetric models. To date, suspension up to 80 deg angle of attack has been achieved.

Britcher, Colin P.↗