Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

A terahertz plasmon cavity detector

Sensitivity of a plasmonic detector is enhanced by integrating a broadband log-periodic antenna with a two-dimensional plasma cavity that is defined by source, drain, and multiple gates of a GaAs/AlGaAs high electron mobility transistor. Both narrow-band terahertz detection and a rich harmonic spectrum are evident. With a bolometric sensor in the channel, we report responsivity, on resonance at 235-240 GHz and at 20 K, of up to 7 kV/W and a noise equivalent power of 5x10{sup -10} W/Hz{sup 1/2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

GaSb/GaP compliant interface for high electron mobility AlSb/InAs heterostructures on (001) GaP

We report on the epitaxial growth of an AlSb/InAs heterostructure on a (001) GaP substrate. We investigate the conditions for the most efficient relaxation of GaSb islands on GaP. In particular, we show that the GaP surface treatment and the growth temperature are crucial for the formation of a two-dimensional periodic array of 90 deg. misfit dislocations at the episubstrate interface. With this relaxation process, an AlSb/InAs heterostructure exhibiting a room temperature mobility of 25 500 cm{sup 2} V{sup -1} s{sup -1} on GaP is demonstrated. This result paves the way to the integration of Sb-based devices on Si substrates through the use of GaP/Si templates.

36 MATERIALS SCIENCE↗

Zinc-blende (Cubic) GaN and AlGaN Layers, Structures and Bulk Crystals by Molecular Beam Epitaxy

We have studied the growth of zinc-blende GaN and AlGaN layers, structures and bulk crystals by molecular beam epitaxy (MBE). We have developed a process for growth by MBE of free-standing cubic GaN layers. Undoped thick cubic GaN films were grown on semi-insulating GaAs (001) substrates by a modified plasma-assisted molecular beam epitaxy (PA-MBE) method and were removed from the GaAs substrate after the growth. The resulting free-standing GaN wafers with thicknesses in the 30-100 {mu}m range may be used as substrates for further epitaxy of cubic GaN-based structures and devices. We have developed procedures to cleave the wafers into 10x10 mm{sup 2} square substrates and to polish them to produce epi-ready surfaces. The first GaN/InGaN LEDs on our zinc-blende GaN substrates have been demonstrated by our collaborators at Sharp Laboratories of Europe.

36 MATERIALS SCIENCE↗

Density Functional Theory of Structural and Electronic Properties of III-N Semiconductors

In this wok, we present the density functional theory (DFT) calculations of cubic III-N based semiconductors by using the full potential linear augmented plane-wave method plus local orbitals as implemented in the WIEN2k code. Our aim is to predict the pressure effect on structural and electronic properties of III-N binaries and ternaries. Results are given for structural properties (e.g., lattice constant, elastic constants, bulk modulus, and its pressure derivative) and electronic properties (e.g., band structure, density of states, band gaps and band widths) of GaAs, GaN, AlN, and InN binaries and GaAsN ternaries. The proposed model uses GGA exchange-correlation potential to determine band gaps of semiconductors at {Gamma}, L and X high symmetry points of Brillouin zone. The results are found in good agreement with available experimental data for structural and electronic properties of these semiconductors.

36 MATERIALS SCIENCE↗

Direct growth of InAsP/InP quantum well heterostructures on Si using crystalline SrTiO{sub 3}/Si templates

Integrating III-V semiconductors on Si is one of the major challenges of epitaxial growth and presents important applicative interest. We describe here an approach based on the use of crystalline SrTiO{sub 3} (STO)/Si templates. The structural and optical properties of InAsP/InP quantum well heterostructures grown directly on Si and on STO/Si templates are compared. Using STO/Si templates strongly improves the structural properties of the III-V heterostructure, and allows observing room-temperature photoluminescence from the quantum well.

36 MATERIALS SCIENCE↗

Effects of Detuning on Control of Intersubband Quantum Well Transitions with Chirped Electromagnetic Pulses

We study the interaction of a chirped electromagnetic pulse with intersubband transitions of a double semiconductor quantum well. We specifically consider the interaction of the ground and first excited subbands with the electromagnetic field and use the nonlinear density matrix equations for the description of the system dynamics. These equations are solved numerically for various values of the electron sheet density for a realistic double GaAs/AlGaAs quantum well, and the efficiency of population transfer is discussed with emphasis given to the effects of the detuning of the central frequency of the electromagnetic field from resonance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Efficient GaInNAs Gain Mirrors for Semiconductor Disk Lasers at 1.18 {mu}m and 1.22 {mu}m

We report two GaInNAs/GaAs semiconductor disk lasers emitting at the wavelengths of 1180 nm and 1220 nm. The lasers generated 5 W and 7 W output powers, respectively, at a mount temperature of 15 deg. C. Both the gain mirrors were grown by molecular beam epitaxy and consisted of a GaAs/AlAs distributed Bragg reflector and an active region with 10 GaInNAs/GaNAs/GaAs QWs.

36 MATERIALS SCIENCE↗

1.22 {mu}m GaInNAs Saturable Absorber Mirrors with Tailored Recovery Time

The effect of in-situ N-ion irradiation on the recombination dynamics of GaInNAs/GaAs semiconductor saturable absorber mirrors has been studied. The samples were fabricated by molecular beam epitaxy using a radio frequency plasma source for nitrogen incorporation in the absorber layers as well as for the irradiation. The recombination dynamics of irradiated samples were studied by pump-probe measurements. The recombination time of the absorbers could be reduced by increasing the irradiation time. The effect of the reduced recombination time on the pulse dynamics of a mode-locked laser setup was studied with a Bi-doped fibre laser. The pulse quality was found to improve with increased irradiation time and reduced recombination time, demonstrating the potential of the in-situ irradiation method for device applications.

36 MATERIALS SCIENCE↗

Fabrication-tolerant 1310 nm laterally-coupled distributed feedback lasers with high side mode suppression ratios

A laterally-coupled distributed feedback (LC-DFB) laser was designed and fabricated using stepper lithography. Such DFB lasers eliminate the need of the commonly required re-growth steps in a conventional DFB laser fabrication process. With LC-DFB lasers, the grating can be lithographically patterned out of the ridge waveguide. High order gratings can enhance the lithographic tolerance for lower resolution patterning, yielding lasers more amenable to mass-manufacturing. 1310 nm InGaAsP/InP LC-DFB laser with third-order gratings was fabricated using i-line 5x stepper lithography. Excellent side mode suppression ratio over 52 dB has been measured with a single mode lasing around 1310 nm.

36 MATERIALS SCIENCE↗

Growth kinetics in position-controlled and catalyst-free InAs nanowire arrays on Si(111) grown by selective area molecular beam epitaxy

We investigated the interwire distance dependence on the growth kinetics of vertical, high-yield InAs nanowire arrays on Si(111) grown by catalyst-free selective area molecular beam epitaxy (MBE). Utilizing lithographically defined SiO{sub 2} nanomasks on Si(111) with regular hole patterns, catalyst-free and site-selective growth of vertically (111)-oriented InAs nanowires was achieved with very high yields of {approx}90 percent. Interestingly, the yield of vertically ordered nanowires was independent of the interwire distance and the initial growth stages. Significant size variation in the nanowires was found to depend critically on the interwire distance and growth time. Two growth regimes were identified--(i) a competitive growth regime with shorter and thinner nanowires for narrow interwire distances and (ii) a diffusion-limited growth regime for wider distances, providing good estimates for the surface diffusion lengths. Surprisingly, despite these size-dependent effects the nanowire geometries remained unaltered with uniform, almost nontapered morphologies even over large variation in nanowire density ({approx}mid-10{sup 6}-10{sup 9} cm{sup -2} range). X-ray diffraction further confirmed the vertical (111) directionality with low crystal tilt by rocking curve widths ({omega} scans) as low as {approx}0.6 deg. These findings demonstrate the capability to precisely tailor the position and size of well-oriented III-V semiconductor nanowires through noncatalytic MBE selective area growth and provide an important step toward fully integrated, uniform vertical III-V nanowire array-on-Si devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

X-ray photoelectron spectroscopy analysis of TlInGaAsN semiconductor system and their annealing-induced structural changes

TlInGaAsN thin films grown by gas-source molecular-beam epitaxy were investigated by x-ray photoelectron spectroscopy (XPS) to analyze the Tl incorporation and to study the annealing-induced transformation of the atomic configurations. XPS analysis revealed that the Tl composition in the grown TlInGaAsN is around 1.5% and that the dominant atomic configuration of the TlInGaAsN changes from the In-As and Ga-N bonds to the In-N and Ga-As bonds by 700 deg. C rapid thermal annealing. High-resolution x-ray diffraction and reciprocal space mapping measurements showed that no significant out-diffusion of the elements occurs in the TlInGaAsN/TlGaAsN quantum wells (QWs) even after the same annealing. It is concluded that the blueshift in the photoluminescence peak for the TlInGaAsN/TlGaAsN QWs after annealing is attributed to the transformation of the atomic configuration in TlInGaAsN.

36 MATERIALS SCIENCE↗

Origin of ferromagnetism in self-assembled Ga{sub 1-x}Mn{sub x}As quantum dots grown on Si

Self-assembled Ga{sub 1-x}Mn{sub x}As magnetic semiconductor quantum dots have been grown on Si (001) substrates using droplet epitaxy by molecular-beam epitaxy. Structural characterization reveals that these dots possess a zinc-blende lattice. The Ga{sub 1-x}Mn{sub x}As quantum dots with 8% Mn content are ferromagnetically soft and slightly anisotropic at low temperature, and show the superparamagnetic behavior with a blocking temperature of 20 K in the in-plane direction. Moreover, the results of x-ray absorption near edge structure provide direct evidences for the substitutional Mn{sup 2+} ion with a half-filled d{sup 5} configuration for the Ga site, suggesting the hole-mediated ferromagnetism in zero-dimensional Ga{sub 1-x}Mn{sub x}As quantum dots.

36 MATERIALS SCIENCE↗

InGaAs heterostructure formation in catalyst-free GaAs nanopillars by selective-area metal-organic vapor phase epitaxy

We investigate axial GaAs/InGaAs/GaAs heterostructures embedded in GaAs nanopillars via catalyst-free selective-area metal-organic chemical vapor deposition. Structural characterization by transmission electron microscopy with energy dispersive x-ray spectroscopy (EDS) indicates formation of axial In{sub x}Ga{sub 1-x}As (x{approx}0.20) inserts with thicknesses from 36 to 220 nm with {+-}10% variation and graded Ga:In transitions controlled by In segregation. Using the heterointerfaces as markers, the vertical growth rate is determined to increase linearly during growth. Photoluminescence from 77 to 290 K and EDS suggest the presence of strain in the shortest inserts. This capability to control the formation of axial nanopillar heterostructures is crucial for optimized device integration.

36 MATERIALS SCIENCE↗

Synthesis of Mesoporous Adsorbent and its Application for Heavy Metal Ions Removal from Aqueous Solution

The mesoporous silicas were synthesized via the evaporation-induced self-assembly (EISA) in the experiment. Cetyltrimethyl ammonium bromide (CTAB) was used as the template, and the silicon source was tetraethoxyorthosilicate (TEOS). The mesoporous silicas were characterized by nitrogen adsorption-desorption analysis, FTIR, TEM and SEM. The mesoporous silicas (adsorbent) exhibited higher pore diameter (centered at 5.57 nm), BET surface area (457.3 m{sup 2{center_dot}}g{sup -1}) and pore volume (0.563 cm{sup 2{center_dot}}g{sup -1}). The mesoporous silicas were used as the adsorbent to remove the heavy metal ions from aqueous solution. The following order of equilibrium adsorption capacity for Cu{sup 2+}, Co{sup 2+}, Ag{sup +} and As{sup 3+} on adsorbent was: Ag{sup +}>Cu{sup 2+}>Co{sup 2+}>As{sup 3+}. Analysis of adsorption kinetics showed that Cu{sup 2+}, Co{sup 2+}, Ag{sup +} and As{sup 3+} adsorption fit the pseudo-second-order nonlinear model significantly. The removal rate for heavy metal ions was high, and the adsorbent can be regenerated by acid treatment without altering its properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct acoustic phonon excitation by intense and ultrashort terahertz pulses

We report on the direct and resonant excitation of acoustic phonons in an AlGaAs intrinsic semiconductor using intense coherent and single cycle terahertz pulses created by two-color femtosecond laser pulse filamentation in air. While the electrons are left unperturbed, we follow the lattice dynamics with time-delayed optical photons tuned to the interband transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Optical Properties Studies Of Ar{sup 2+} Ion Implanted Mn Deposited GaAs

Mn thin film deposited GaAs samples were implanted with 250 keV Ar{sup +2} ions for various fluences 5x10{sup 15}, 1x10{sup 16} and 5x10{sup 16} ions cm{sup -2}. Optical and structural properties of the samples have been investigated by using ultraviolet spectroscopy and X-ray diffraction techniques. Optical absorbance of the implanted samples was found to decrease with increase in argon ion fluence. XRD spectra of the samples implanted for ion fluences 5x10{sup 15} and 1x10{sup 16} showed the formation of (GaMn)As at 2{theta} value of 65.34 deg. The XRD spectrum of sample 1x10{sup 16} cm{sup -2} annealed at 450 deg. C showed the formation of magnetic phases.

36 MATERIALS SCIENCE↗

Local Magnetic Behavior of {sup 54}Fe In EuFe{sub 2}As{sub 2}: Microscopic Study By Perturbed Angular Distribution Spectroscopy

We report time differential perturbed angular distribution measurement of {sup 54}Fe on a polycrystalline EuFe{sub 2}As{sub 2} sample. The local susceptibility measured shows Curie-Weiss like temperature dependence in the paramagnetic region. The spin-lattice relaxation observed shows Korringa like relaxation and changes discontinuously at T{sub S} = T{sub N} = 190 K. Below T{sub N}, the hyperfine field shows two components. The low filed component of the hyperfine field shows a power law dependence of 0.27 on temperature.

36 MATERIALS SCIENCE↗

Tetragonal To Collapsed Tetragonal Phase Transition In BaFe{sub 2}As{sub 2} and CaFe{sub 2}As{sub 2}

Superconductivity in MFe{sub 2}As{sub 2} (M = Ba, Ca) compounds appears either at a critical doping level at ambient pressure or in the parent compound itself by application of pressure above a critical value. We report high pressure powder x-ray diffractions studies for these compounds at 300 K up to about 56 GPa using membrane diamond anvil cells. The measurements for BaFe{sub 2}As{sub 2} show a new tetragonal to collapsed tetragonal phase transition at about 22 GPa that remains stable upto 56 GPa. CaFe{sub 2}As{sub 2} is already known to transform to collapsed phase at 1.7 GPa at 300 K. Our measurements on CaFe{sub 2}As{sub 2} do not show any post collapsed phase transition on increase of pressure 50 GPa at 300 K. It is important to note that the transition in both compounds occurs when they are compressed to almost the same value of the unit cell volume and attain similar c{sub t}/a{sub t} ratios. We present a detailed analysis of the pressure dependence and structure phase transitions as well as equation of state in these important FeAs compounds that should be useful in the context of possible superconductivity in the collapsed phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗