Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALTERNATE REDUCTANT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Highly active non-PGM catalysts prepared from metal organic frameworks

Finding inexpensive alternatives to platinum group metals (PGMs) is essential for reducing the cost of proton exchange membrane fuel cells (PEMFCs). Numerous materials have been investigated as potential replacements of Pt, of which the transition metal and nitrogen-doped carbon composites (TM/N x /C) prepared from iron doped zeolitic imidazolate frameworks (ZIFs) are among the most active ones in catalyzing the oxygen reduction reaction based on recent studies. In this report, we demonstrate that the catalytic activity of ZIF-based TM/N x /C composites can be substantially improved through optimization of synthesis and post-treatment processing conditions. Ultimately, oxygen reduction reaction (ORR) electrocatalytic activity must be demonstrated in membrane-electrode assemblies (MEAs) of fuel cells. The process of preparing MEAs using ZIF-based non-PGM electrocatalysts involves many additional factors which may influence the overall catalytic activity at the fuel cell level. Evaluation of parameters such as catalyst loading and perfluorosulfonic acid ionomer to catalyst ratio were optimized. Our overall efforts to optimize both the catalyst and MEA construction process have yielded impressive ORR activity when tested in a fuel cell system.

30 DIRECT ENERGY CONVERSION↗

Design study of toroidal traction CVT for electric vehicles

The development, evaluation, and optimization of a preliminary design concept for a continuously variable transmission (CVT) to couple the high-speed output shaft of an energy storage flywheel to the drive train of an electric vehicle is discussed. An existing computer simulation program was modified and used to compare the performance of five CVT design configurations. Based on this analysis, a dual-cavity full-toroidal drive with regenerative gearing is selected for the CVT design configuration. Three areas are identified that will require some technological development: the ratio control system, the traction fluid properities, and evaluation of the traction contact performance. Finally, the suitability of the selected CVT design concept for alternate electric and hybrid vehicle applications and alternate vehicle sizes and maximum output torques is determined. In all cases the toroidal traction drive design concept is applicable to the vehicle system. The regenerative gearing could be eliminated in the electric powered vehicle because of the reduced ratio range requirements. In other cases the CVT with regenerative gearing would meet the design requirements after appropriate adjustments in size and reduction gearing ratio.

Raynard, A. E.↗

Initial Testing of Off-Gas Recycle Condensate Liquid from the WTP Low Activity Waste Vitrification Process - 16432

The Waste Treatment and Immobilization Plant (WTP) under construction at the Hanford site is designed to treat and immobilize the inventory of High-Level Waste stored in the 177 underground storage tanks. The WTP process flow was designed to pre-treat this waste, separating it into High Level Waste (HLW) and Low Activity Waste (LAW) fractions for vitrification. Vitrification of the waste generates a condensate stream from the off-gas processes originating from two off-gas treatment unit operations, the Submerged Bed Scrubber (SBS) and the Wet Electrostatic Precipitator (WESP). The baseline plan for disposition of the stream from the LAW melter is to recycle it to the Pretreatment facility where it gets evaporated and processed through the LAW melter again. If the Pretreatment facility is unavailable, this baseline disposition pathway is not viable. Additionally, chloride, fluoride, and sulfate are partially volatile in the melter, accumulating to high concentrations while recycling and impacting the glass waste loading and facility throughput. The primary radionuclide that volatizes and accumulates is {sup 99}Tc. The long half-life and environmental mobility of {sup 99}Tc complicates disposal options for this secondary aqueous waste stream. This task is investigating {sup 99}Tc removal to examine the potential for diverting this stream to an alternate disposition path and avoiding impacting the glass waste loading. Separation methods for {sup 99}Tc have focused on using inorganic precipitation agents that can remove it by reducing it from soluble pertechnetate ion, with a +7 oxidation state, to insoluble technetium dioxide in the +4 oxidation state. Stannous chloride (SnCl{sub 2}) has been found highly effective at causing the reduction and precipitating {sup 99}Tc for removal, but it also precipitates other components. The primary competitor that precipitates is chromium, which consumes the redox activity of the Sn(II), causing addition of more of the SnCl{sub 2}. Research has examined the optimum quantity of SnCl{sub 2}, mixing time, and the impact of other redox-active species. It is also important to know the stability of the precipitated {sup 99}Tc in process conditions, since it is expected it will eventually be re-oxidized by oxygen and dissolve. This work is expected to determine if a {sup 99}Tc removal step could be used to decontaminate the bulk of this stream, and make it suitable for other disposal paths so that the chloride, fluoride, and sulfate can be diverted away from the glass melter. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Assessment of Algal Farm Designs Using a Dynamic Modular Approach

The notion of renewable energy provides an important mechanism for diversifying an energy portfolio, which ultimately would have numerous benefits including increased energy resilience, reduction of foreign energy supplies, reduced GHG emissions, development of a green energy sector that contributes to economic growth, and providing a sustainable energy supply. The conversion of autotrophic algae to liquid transportation fuels is the basis of several decades of research to competitively bring energy-scale production into reality; however, many challenges still remain for making algal biofuels economically viable. Addressing current challenges associated with algal production systems, in part, requires the ability to assess spatial and temporal variability, rapidly evaluate alternative algal production system designs, and perform large-scale assessments considering multiple scenarios for thousands of potential sites. We introduce the Algae Logistics Model (ALM) which helps to address these challenges. The flexible nature of the ALM architecture allows the model to: 1) interface with external biomass production and resource assessment models, as well as other relevant datasets including those with spatiotemporal granularity; 2) interchange design processes to enable operational and economic assessments of multiple design configurations, including the integration of current and new innovative technologies; and 3) conduct trade-off analysis to help understand the site-specific techno-economic trade-offs and inform technology decisions. This study uses the ALM to investigate a baseline open-pond production system determined by model harmonization efforts conducted by the U.S. Department of Energy. Six sites in the U.S. southern-tier were sub-selected and assessed using daily site-specific algae biomass productivity data to determine the economic viability of large-scale open-pond systems. Results show that costs can vary significantly depending on location and biomass productivity and that integration of novel dewatering equipment, order of operations, and equipment scaling can also have significant impacts on economics.

09 BIOMASS FUELS↗

Reversibly phototunable TiO{sub 2} photonic crystal modulated by Ag nanoparticles' oxidation/reduction

We report a reversibly phototunable photonic crystal system whose reflectance at the stop band position can be modulated by alternating UV/visible (UV/Vis) irradiation. The phototunable system consists of Ag nanoparticles and TiO{sub 2} photonic crystal. The stop bands intensity of Ag loaded TiO{sub 2} photonic crystals were found to be dependent on the redox states of Ag nanoparticles. The quasi 'on' and 'off' states of the stop band were reversibly modulated by the Ag nanoparticles' oxidation/reduction through alternating UV/Vis light irradiation.

36 MATERIALS SCIENCE↗

Pangenomics reveals alternative environmental lifestyles among chlamydiae

Chlamydiae are highly successful strictly intracellular bacteria associated with diverse eukaryotic hosts. Here we analyzed metagenome-assembled genomes of the “Genomes from Earth’s Microbiomes” initiative from diverse environmental samples, which almost double the known phylogenetic diversity of the phylum and facilitate a highly resolved view at the chlamydial pangenome. Chlamydiae are defined by a relatively large core genome indicative of an intracellular lifestyle, and a highly dynamic accessory genome of environmental lineages. We observe chlamydial lineages that encode enzymes of the reductive tricarboxylic acid cycle and for light-driven ATP synthesis. We show a widespread potential for anaerobic energy generation through pyruvate fermentation or the arginine deiminase pathway, and we add lineages capable of molecular hydrogen production. Genome-informed analysis of environmental distribution revealed lineage-specific niches and a high abundance of chlamydiae in some habitats. Together, our data provide an extended perspective of the variability of chlamydial biology and the ecology of this phylum of intracellular microbes.

59 BASIC BIOLOGICAL SCIENCES↗

Metal-containing photopolymer resins generated by reduction of dissolved metal salts

According to one embodiment, a three-dimensional structure includes: at least one photopolymer having at least one metal dispersed throughout at least portions of a bulk of the structure. The structure is characterized by features having a horizontal and/or vertical feature resolution in a range from several hundred nanometers to several hundred microns. The portions of the bulk throughout which metal is dispersed may optionally be selectively determined. In more embodiments, the structure may have electroless plated metal formed on surfaces thereof, alternatively or in addition to the metal dispersed throughout the bulk of the structure. The electroless plating may be achieved without the use of a surface activation bath. Corresponding methods for forming various embodiments of such three dimensional structures are also disclosed.

36 MATERIALS SCIENCE↗

Structures and self-activating photoluminescent properties of Sr{sub 3-x}A{sub x}GaO{sub 4}F (A=Ba, Ca) materials

The synthesis, structures and photoluminescent properties of mixed oxyfluorides of the type Sr{sub 3-x}A{sub x}GaO{sub 4}F are compared to Sr{sub 3-x}A{sub x}AlO{sub 4}F (A=Ca, Ba) materials. In these compounds the F{sup -} and O{sup 2-} ions are ordered and located on two distinct crystallographic sites. When substituting Sr{sup 2+} by Ba{sup 2+} and Ca{sup 2+}, we find in Sr{sub 3-x}A{sub x}GaO{sub 4}F materials an ordering of the alkaline earth cations over the two crystallographic sites. The amount of Ba{sup 2+} ions that can be substituted into Sr{sub 3-x}A{sub x}GaO{sub 4}F is x{<=}1.2, which is slightly more than can be incorporated into the previously reported Al-analog Sr{sub 3-x}A{sub x}AlO{sub 4}F (x=1.0). Conversely, the amount of Ca{sup 2+} ions that can be substituted into Sr{sub 3-x}Ca{sub x}GaO{sub 4}F (x=0.3) is significantly less than in Sr{sub 3-x}Ca{sub x}AlO{sub 4}F (x=1.0). A post-synthesis reduction step causes these materials to exhibit self-activating broad band photoluminescence where the emitted colors vary with the amount of ions substituted into the host lattice. - Graphical abstract: TOC Statement The structures of the self-activating phosphors Sr{sub 3-x}A{sub x}MO{sub 4}F (A=Ba, Ca and M=Al, Ga) can be rationalized as alternating layers of bond compression and elongation, which impact the photoluminescence. Highlights: Black-Right-Pointing-Pointer Comparison of the structural changes in Sr{sub 3-x}A{sub x}AlO{sub 4}F and Sr{sub 3-x}A{sub x}GaO{sub 4}F (A=Ba, Ca) and its influence on the photoluminescence of these self-activating phosphors. Black-Right-Pointing-Pointer Analysis of the Global Instability Index of the Sr{sub 3-x}A{sub x}AlO{sub 4}F and Sr{sub 3-x}A{sub x}GaO{sub 4}F (A=Ba, Ca). Black-Right-Pointing-Pointer Comparison of the photoluminescence between the self-activating phosphors Sr{sub 3-x}A{sub x}AlO{sub 4}F and Sr{sub 3-x}A{sub x}GaO{sub 4}F (A=Ba, Ca).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of solid particle candidates for application in thermal energy storage and concentrating solar power systems

Thermal energy storage (TES) enables concentrating solar power to remain competitive in the renewable energy mix by firming up intermittent solar resource and providing grid services such as load shifting. Free from siting constraints, stand-alone TES systems show promise as a low-cost alternative to traditional pumped-storage hydropower or compressed air energy storage. At the core of all TES technologies is a storage medium, the selection of which governs many aspects of system design and operation. Although the majority of commercial installations utilize molten salts, solid particles can demonstrate stability over wider temperature ranges. This amounts to increased energy storage densities and corresponding reductions in system cost which is essential in achieving low-cost energy storage. In this work, eight solid particle candidates are systematically identified and screened for application in a specific particle-TES system. The five most promising candidates (CARBO CP and HSP, calcined flint clay (CFC), brown fused alumina (BFA), and silica sand) are further characterized by size and morphology for fluidization suitability, flowability for particle transport, and thermal stability. Calcined flint clay and brown fused alumina are eventually down-selected due to thermal instability at the target operational temperature of 1200 °C. Although the physical characteristics of CARBO outperform silica sand in all categories examined, the marginal performance gains are considered insufficient to justify the additional media cost so silica sand is selected as the leading candidate. Within the silica sand (α-quartz) space, the high end of Geldart Group B particles is identified to satisfy the target fluidization regime for the application of interest without compromising particle flowability. Here, in focused testing, Silica 460 is shown to exhibit sufficient stability through long-duration (500-hour) thermal and cyclic testing (1200 °C), 10-hour testing at 1400 °C, and in contact with candidate refractory containment materials. Finally, an average heat capacity of 1.1 J/g∙ °C is measured over 300-1200 °C with a quartz inversion enthalpy (ΔH α-β ) of 10.7J/g.

14 SOLAR ENERGY↗

Ligand-Dependent Tuning of Interband and Intersubband Transitions of Colloidal CdSe Nanoplatelets

Although surface ligands of colloidal nanocrystals are known to adjust the absolute energy levels of valence and conduction bands of semiconductor nanocrystals, they typically have only minor influence on the band gap or effective masses. This changes in nanoplatelets. Ligand exchange of CdSe colloidal nanoplatelets induces large (up to 300 meV) bathochromic shifts of both interband and intersubband transitions. Here, three families of ligands-halides, thiolates, and phosphonates-are used to tune interband transitions, reflecting electron and hole confinement, across visible wavelengths and intersubband transitions, reflecting electron confinement, across the near-infrared spectral window. Furthermore, careful examination shows that delocalization from expansion of the nanoplatelet short axis, which was reported previously, cannot alone explain observed red shifts. Instead, comparison of intersubband, interband, and hole energy levels shows that ligand head group chemistry confers specific, idiosyncratic adjustments of the contribution of conduction and valence bands to the observed bathochromic shifts. Phosphonate ligands show the largest band gap reductions but the smallest red shift of intersubband transition energies; halide-exchanged samples displayed smaller reductions in band gap but large red shifts of intersubband transitions; thiolates fall in between. A related specificity is observed in hole states, which implicates ligand-responsive valence band curvature as an additional contribution driving optical changes. For nanoplatelets, surface ligand chemistry offers not only a tool to adjust the absolute energy level of conduction and valence bands but also an alternative route to preferential electron or hole band engineering that is normally achieved with inorganic shells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Toward a Molecular Understanding of Energetics in Li–S Batteries Using Nonaqueous Electrolytes: A High-Level Quantum Chemical Study

The Li-S battery (secondary cell or redox flow) technology is a promising future alternative to the present lithium intercalation-based energy storage and, therefore, a molecular level understanding of the chemical processes and properties such as stability of intermediates, reactivity of polysulfides and reactivity towards the non-aqueous electrolytes in the Li-S batteries is of great interest. In this paper, quantum chemical methods (G4MP2, MP2, and B3LYP) were utilized to compute reduction potentials of lithium polysulfides and polysulfide molecular clusters, energetics of disproportionation and association reactions of likely intermediates, and their reactions with ether-based electrolytes. Based on the computed reaction energetics in solution, a probable mechanism during the discharge process for polysulfide anions and lithium polysulfides in solution is proposed and likely intermediates such as S42-,S32-, S22-, and S31- radical were identified. Additionally, the stability and reactivity of propylene carbonate and tetraglyme solvent molecules were assessed against the above-mentioned intermediates and other reactive species by computing the reaction energetics required to initiate the solvent decomposition reactions in solution. Calculations suggest that the propylene carbonate molecule is unstable against the polysulfide anions such as S22-, S32-, and S42- (ΔH† < 0.8 eV) and highly reactive towards Li2S2 and Li2S3. Even though the tetraglyme solvent molecule exhibits increased stability towards polysulfide anions compared to propylene carbonate, this molecule too is vulnerable to nucleophilic attack from Li2S2 and Li2S3 species in solutions. Hence, a long- term stability of the ether molecules is unlikely if high concentration of these reactive intermediates present in the Li-S energy storage systems.

25 ENERGY STORAGE↗

Activated graphene nanoplatelets as a counter electrode for dye-sensitized solar cells

Activated graphene nanoplatelets (aGNPs) prepared by a hydrothermal method using KOH as activating agent were used as counter electrode for high efficiency dye-sensitized solar cells (DSSCs). After the KOH activation, the scanning electron microscopy image shows that aGNPs demonstrate a more curled, rough, and porous morphology which could contain both micro- and mesopores. The KOH activation changed the stacked layers of GNPs to a more crumpled and curved morphology. The microstructure of large pores significantly increased the electrode surface area and roughness, leading to the high electrocatalytic activity for triiodide reduction at the counter electrode. The DSSCs fabricated using aGNP as counter electrodes were tested under standard AM 1.5 illumination with an intensity of 91.5 mW/cm{sup 2}. The device achieved an overall power conversion efficiency of 7.7%, which is comparable to the conventional platinum counter electrode (8%). Therefore, the low cost and high performance aGNP based counter electrode is a promising alternative to conventional Pt counter electrode in DSSCs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling performance of data collection systems for high-energy physics

Exponential increases in scientific experimental data are outpacing silicon technology progress, necessitating heterogeneous computing systems—particularly those utilizing machine learning (ML)—to meet future scientific computing demands. The growing importance and complexity of heterogeneous computing systems require systematic modeling to understand and predict the effective roles for ML. We present a model that addresses this need by framing the key aspects of data collection pipelines and constraints and combining them with the important vectors of technology that shape alternatives, computing metrics that allow complex alternatives to be compared. For instance, a data collection pipeline may be characterized by parameters such as sensor sampling rates and the overall relevancy of retrieved samples. Alternatives to this pipeline are enabled by development vectors including ML, parallelization, advancing CMOS, and neuromorphic computing. By calculating metrics for each alternative such as overall F1 score, power, hardware cost, and energy expended per relevant sample, our model allows alternative data collection systems to be rigorously compared. We apply this model to the Compact Muon Solenoid experiment and its planned high luminosity-large hadron collider upgrade, evaluating novel technologies for the data acquisition system (DAQ), including ML-based filtering and parallelized software. The results demonstrate that improvements to early DAQ stages significantly reduce resources required later, with a power reduction of 60% and increased relevant data retrieval per unit power (from 0.065 to 0.31 samples/kJ). However, we predict that further advances will be required in order to meet overall power and cost constraints for the DAQ.

Olin-Ammentorp, Wilkie (ORCID:0000000224729862)↗

U.S. Department of Energy clean cities five-year strategic plan.

Clean Cities is a government-industry partnership sponsored by the U.S. Department of Energy's (DOE) Vehicle Technologies Program, which is part of the Office of Energy Efficiency and Renewable Energy. Working with its network of about 100 local coalitions and more than 6,500 stakeholders across the country, Clean Cities delivers on its mission to reduce petroleum consumption in on-road transportation. In its work to reduce petroleum use, Clean Cities focuses on a portfolio of technologies that includes electric drive, propane, natural gas, renewable natural gas/biomethane, ethanol/E85, biodiesel/B20 and higher-level blends, fuel economy, and idle reduction. Over the past 17 years, Clean Cities coalitions have displaced more than 2.4 billion gallons of petroleum; they are on track to displace 2.5 billion gallons of gasoline per year by 2020. This Clean Cities Strategic Plan lays out an aggressive five-year agenda to help DOE Clean Cities and its network of coalitions and stakeholders accelerate the deployment of alternative fuel and advanced technology vehicles, while also expanding the supporting infrastructure to reduce petroleum use. Today, Clean Cities has a far larger opportunity to make an impact than at any time in its history because of its unprecedented $300 million allocation for community-based deployment projects from the American Recovery and Reinvestment Act (ARRA) (see box below). Moreover, the Clean Cities annual budget has risen to $25 million for FY2010 and $35 million has been requested for FY2011. Designed as a living document, this strategic plan is grounded in the understanding that priorities will change annually as evolving technical, political, economic, business, and social considerations are woven into project decisions and funding allocations. The plan does not intend to lock Clean Cities into pathways that cannot change. Instead, with technology deployment at its core, the plan serves as a guide for decision-making at both the national and local levels of Clean Cities over the next five years. The plan recognizes the need for flexibility and sets out a strategic direction that will build on the progress of current technologies and new opportunities presented in emerging fuels and technologies, such as hydrogen and fuel cells, as well as new niche markets such as off-road applications that build additional throughput at existing alternative fuel stations.

02 PETROLEUM↗

Performance enhancement of a polymer-electrolyte membrane H2O and CO2 co-electrolysis system for the production of syngas

Co-electrolysis of water and CO 2 to produce hydrogen and CO would provide an alternative pathway to making chemicals and fuels. The process could provide a way to use excess renewable electricity, or could be coupled to nuclear or carbon-based power generation. Opus 12 has overcome barriers to using a proton exchange membrane (PEM) reactor for this reaction by modifying the cathode catalyst layer to enhance simultaneous electrochemical H 2 production and CO 2 reduction. Current reactor performance metrics in terms of selectivity, current density, and applied voltage meet or exceed internal targets. However, the cell lifetime must be extended for a commercial product to be feasible. Through this H2@Scale project, we propose to work with the Weber Group at LBNL to diagnose performance decay mechanisms that currently limit the lifetime of the electrochemical syngas generator. LBNL is host to a number of advanced PEM diagnostic tools and lab scientists have unique experience in exploring performance and lifetime tradeoffs at the component to cell scales. Using the results of this study, the identified limiting mechanisms will be mitigated through improved cell and catalyst design.

10 SYNTHETIC FUELS↗

A mechanical property and stress corrosion evaluation of Custom 455 stainless steel alloy

The mechanical and stress corrosion properties are presented of vacuum melted Custom 455 stainless steel alloy bar (1.0-inch diameter) and sheet (0.083-inch thick) material aged at 950 F, 1000 F, and 1050 F. Low temperature mechanical properties were determined at temperatures of 80 F, 0 F, -100 F, and -200 F. For all three aging treatments, the ultimate tensile and 0.2 percent offset yield strengths increased with decreasing test temperatures while the elongation held fairly constant down to -100 F and decreased at -200 F. Reduction in Area decreased moderately with decreasing temperature for the longitudinal round (0.250-inch diameter) specimens. Notched tensile strength and charpy V-notched impact strength decreased with decreasing test temperature. For all three aging treatments, no failures were observed in the unstressed specimens or the specimens stressed to 50, 75, and 100 percent of their yield strengths for 180 days of alternate immersion testing in a 3.5 percent NaCl solution. As indicated by the results of tensile tests performed after alternate immersion testing, the mechanical properties of Custom 455 alloy were not affected by stress or exposure under the conditions of the evaluation.

Montano, J. W.↗

Solar power satellite system definition study. Volume 1: Executive summary, phase 3

Results of a three phase study of the Solar Power Satellite System are summarized. Various options and alternate systems were considered and the following conclusions were reached: antenna mounted solid state transmitters are potentially as cost effective as the klystron approach, althrough limited to 2500 megawatts net output; the free electron laser and optical diode laser appear most promising for laser power transmission; ground antenna siting need not be restricted to below 35 degrees of latitude; and nonrecurring cost reductions attainable by using a smaller Heavy Lift Launch Vehicle are highly attractive.

Source record↗

Hierarchical Poly Tree computer architectures defined by computational multidisciplinary mechanics

This paper will develop an alternative computer architecture called the Poly Tree. Based on the requirements of computational mechanics and the concept of hierarchical substructuring, the paper will explore the development of problem-dependent parallel networks of processors which will enable significant, often superlinear, speed enhancements; provide a logical/efficient framework for linear/nonlinear and transient structural mechanics problems; and provide a logical framework from which to apply model reduction procedures. In addition, the paper will explore optimal processor arrangements which define the overall system granularity. Consideration will also be given to system I/O requirements.

Padovan, Joe↗