Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “1D”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,603 records · Page 89

Products and yields from O3 photodissociation at 1576 A

An analysis has been made of the primary atomic and molecular products arising from O3 photodissociation at 1576 A. The yield of oxygen atoms is 1.90 + or - 0.30, of which 71 percent are O(3P) and 29 percent are O(1D). Since a primary yield greater than unity can only be a consequence of three-fragment dissociation, these results suggest that fragmentation into three O(3P) atoms, and production of O(1D) plus a singlet oxygen molecule, have comparable yields. Observation of prompt emission in the 7300-8100 A spectral region indicates that the singlet O2 is O2(b 1Sigma + g). Vibrational levels in the range v = 0-6 have been detected, the distribution corresponding to a vibrational temperature of 1000 K.

Taherian, M. R.↗

How close are ground-based Fabry-Perot thermospheric wind and temperature measurements to exospheric values? A simulation study

A computer simulation model of the measurement process for a ground-based Fabry-Perot interferometer (FPI) has been developed and used to study how variations of wind and temperature along the instrument line-of-sight affect the Doppler shift and width of the observed nightglow O(1D) emission line at high spectral resolution. Ground-based-derived temperatures in the nighttime sector of the winter hemisphere are found to give values that are representative of the peak O(1D) emission altitude. However, when the vertical temperature gradients are large, the ground-based FPI temperature measurement may differ by as much as about 12 percent from the temperature at the peak emission height. Simulations of the FPI measurement of nighttime thermospheric temperatures show that ground-based-derived temperatures may be lower by about 10 percent than the corresponding exospheric temperatures in the winter hemisphere and by about 15 percent in the summer hemisphere.

Mccormac, F. G.↗

Gaseous cometary coronal

Ground-based observations of coma emission line profiles permit direct insight into the composition and kinetic state of a cometary atmosphere and in turn provide much needed constraints in reconstructing a comet's history; the profiles themselves yield information on the mechanisms generating the observed species, while their intensities correspond to overall production rates by the nucleus. Intensities and line profiles at wavelength 6562.1A (H-alpha) and 6300.3A (O(1D) deday) were obtained for Comet Halley in the period March - April 1986 and for Comet Wilson in the period March 1987 using the Fabry-Perot optical facility at Arecibo; the Comet Halley observations have been undergoing careful analysis as the main effort of this project. Attention was centered on O(1D) 6300A observations obtained over four consecutive nights in April 1986. Surprisingly, the sorts of profiles to be expected in coma observations have not been theoretically developed in the past, necessitating a reappraisal of this question. It turns out that coma profiles vary noticeably according to excitation mechanism, and the proper interpretation of a profile requires the use of the appropriate model type. A paper cataloging the basic types and their interpretation will be submitted for publication in a few months. The intensities of the 6300A emission can be used independently to estimate the production rate of H2O by the comet nucleus; indeed, this may be the most reliable way of determining this basic quantity using ground-based facilities. The H2O production rates implied by our observations throughout the period March-April 1986 have been derived and are to be presented at the upcoming COSPAR special session Aeronomy of Comets and Outer Planets.

Atreya, Sushil K.↗

Imaging and spectroscopy of Comet P/Halley

The goals of this investigation are the analysis of a large set of high-resolution echelle/reticon spectra, and the reduction and analysis of a set of narrow-band-filtered charge coupled device (CCD) images of Comet Halley taken during the preperihelion period at Oak Ridge Observatory by Dr. R. E. McCrosky. The scientific objectives associated with these goals are the determination of the spatial distributions of several important radicals, atoms and ions in the coma. These include C2, CN, C3, H2O(+) and CO(+) from the image data. The analysis of the neutral species distribution with Monte Carlo models will aid in the understanding of their production and decay mechanisms as well as serve as an important indicator of the physical conditions in the inner coma. The spatial distributions of the ions will serve as a guide to constrain the complex model necessary for understanding the interaction of the solar wind and the cometary ions. Work during this past year has been devoted largely to the reduction of the standard star photometry for the CCD image data set, as well as the re-flat-fielding of a number of the comet images. We are pleased to report that despite a number of setbacks and the small effort devoted to this work (2 1/2 months for the PI and a generous share of completely unsupported time by Dr. McCrosky) that this portion of the work has been successfully completed. The goals for the upcoming final year of this project (under a new project number) are to complete the calibration of the CCD image data for inclusion in the IHW archive, to analyze a select portion of the neutral radical images with our Monte Carlo models, and to present the results of the 6300/region spectra as a guide to low-resolution spectral observers in order to yield the unambiguous separation of the contributions of cometary O(1D), airglow O(1D), and the numerous NH2 lines in that region of the spectrum.

Combi, Michael R.↗

Modeling and simulation of InP homojunction solar cells

Modeling and simulation of single-crystal InP homojunction solar cells has been performed using the PC-1D code. Cell design and performance have been optimized using the best available estimates of the various materials parameters. A comparison has been made of the predictions of the PC-1D model to those of other models. The optimum performance is predicted to give an efficiency approaching 21 percent at AM0. It is shown that in order to describe the performance of actual cells it is necessary to use larger values of the intrinsic carrier concentration and the surface recombination velocity (SRV) than have been reported in the literature. However, even with a near-maximum value of SRV (e.g., 10 to the 7th cm/s) it is necessary to reduce the minority carrier diffusion length in the emitter to only 0.01 micron in order to account for the relatively low quantum efficiency in the blue part of the spectrum. This indicates that improvement in the emitter bulk properties could be much more important than the SRV. Other loss mechanisms are also discussed; in particular, it is shown that recombination in the base, for good quality material, is relatively insignificant.

Yahia, A. H.↗

The red and green lines of atomic oxygen in the nightglow of Venus

O(1D) and O(1S), the excited states that give rise to the atomic oxygen red and green lines, are produced in the Venus nightglow in dissociative recombination of O2(+). The emissions should also be excited by precipitation of soft electrons, the suggested source of the 'auroral' emission features of atomic oxygen at 1304 and 1356 A, which have been reported from observations of the Pioneer Venus Orbiter Ultraviolet Spectrometer. No emisison at 6300 or 5577 A was detected, however, by the visible spectrophotometers on the Soviet spacecraft Veneras 9 and 10; upper limits have been placed on the intensities of these features. The constraints placed on models for the auroral production mechanism by the Venera upper limits by modeling the intensities of the red and green lines in the nightglow are evaluated, combining a model for the vibrational distribution of O2(+) on the nightside of Venus with rate coefficients recently computed by Guberman for production of O(1S) and O(1D) in dissociative recombination of O2(+) from different vibrational levels. The integrated overhead intensities are 1 - 2 R for the green line and about 46 R for the red line.

Fox, J. L.↗

The effect of varying Mach number on crossing, glancing shocks/turbulent boundary-layer interactions

Two crossing side-wall shocks interacting with a supersonic tunnel wall boundary layer have been investigated over a Mach number range of 2.5 to 4.0. The investigation included a range of equal shock strengths produced by shock generators at angles from 4.0 to 12.0 degrees. Results of flow visualization show that the interaction is unseparated at the low shock generator angles. With increasing shock strength, the flow begins to form a separated region that grows in size and moves forward and eventually the model unstarts. The wall static pressures show a symmetrical compression that merges on the centerline upstream of the inviscid shock locations and becomes more 1D downstream. The region of the 1D pressure gradient moves upstream with increasing shock strengths until it coincides with the leading edge of the shock generators at the limit before model unstart. At the limiting conditions the wall pressure gradients are primarily in the axial direction throughout.

Hingst, W. R.↗

Rapid tuning CW laser technique for measurements of gas velocity, temperature, pressure, density, and mass flux using NO

An intracavity-doubled rapid-tuning CW ring dye laser was used to acquire fully resolved absorption profiles of NO line pairs in the A-X band at 225 nm at a rate of 4 kHz. These profiles were utilized for simultaneous measurements of flow parameters in the high-speed 1D flows generated in a shock tube. Velocity was determined from the Doppler shift, measured using a pair of profiles simultaneously acquired at different angles with respect to the flow direction. Temperature was determined from the intensity ratio of the adjacent lines. Pressure and density were found both from the collisional broadening and the fractional absorption. From this information the mass flux was determined. The results compare well to 1D shock calculations.

Chang, Albert Y.↗

On the efficiency of solar heating in the middle atmosphere

The efficiency at which solar ultraviolet radiation absorbed in the Hartley band of ozone is directly converted to heat in the terrestrial mesosphere and lower thermosphere (50-110 km) is calculated. The ozone molecule undergoes photolysis to yield the excited species O(1D) and O2(1Delta) with a quantum yield of about 0.9. Spontaneous emission from O2(1Delta) and from O2(1Sigma) (excited by energy transfer from O/1D/) significantly decreases the amount of energy available for heat. Similarly, the efficiency at which solar ultraviolet radiation absorbed by O2 in the Schumann-Runge continuum is directly converted to heat in the lower thermosphere (95-110 km) is calculated. The O2 undergoes photolysis and the excited product O(1D) is generated. Spontaneous emission from O2(1Sigma) (excited by energy transfer from O/1D/) reduces the amount of energy available for heat in the lower thermosphere. The consideration of these energy transfer and loss processes results in significantly reduced heating rates as compared to those conventionally calculated in models of the middle atmosphere.

Mlynczak, Martin G.↗

Unified nonlinear analysis for nonhomogeneous anisotropic beams with closed cross sections

A unified methodology for geometrically nonlinear analysis of nonhomogeneous, anisotropic beams is presented. A 2D cross-sectional analysis and a nonlinear 1D global deformation analysis are derived from the common framework of a 3D, geometrically nonlinear theory of elasticity. The only restrictions are that the strain and local rotation are small compared to unity and that warping displacements are small relative to the cross-sectional dimensions. It is concluded that the warping solutions can be affected by large deformation and that this could alter the incremental stiffnes of the section. It is shown that sectional constants derived from the published, linear analysis can be used in the present nonlinear, 1D analysis governing the global deformation of the beam, which is based on intrinsic equations for nonlinear beam behavior. Excellent correlation is obtained with published experimental results for both isotropic and anisotropic beams undergoing large deflections.

Atilgan, Ali R.↗

Electron beams and Langmuir turbulence in solar type III radio bursts observed in the interplanetary medium

Results are presented of in situ observations of electron beams, plasma waves, and associated solar type II radio emission in the interplanetary medium near 1 AU, which were provided by the ISEE-3 spacecraft. It is shown that electron beams are formed by the faster electrons arriving before the slower ones, following an impulsive injection at the sun. The resulting bump-on-tail in the reduced 1D distribution function is unstable to the growth of electrostatic electron plasma (Langmuir) waves. The Langmuir waves are observed to be highly impulsive in nature. The onset and temporal variations of the observed plasma waves are in good qualitative agreement with the wave growth expected from the evolution of the measured 1D distribution function. The lack of obvious plateauing of the bump-on-tail suggests that the waves were removed from resonance with the beam electrons by some wave-wave interaction.

Lin, R. P.↗

Acousto-Ultrasonic analysis of failure in ceramic matrix composite tensile specimens

Three types of acousto-ultrasonic (AU) measurements, stress-wave factor (SWF), lowest antisymmetric plate mode group velocity (VS), and lowest symmetric plate mode group velocity (VL), were performed on specimens before and after tensile failure. Three different Nicalon fiber architectures with ceramic matrices were tested. These composites were categorized as 1D (unidirectional fiber orientation) SiC/CAS glass ceramic, and 2D and 3D woven SiC/SiC ceramic matrix materials. SWF was found to be degraded after tensile failure in all three material categories. VS was found to be degraded only in the 1D SiC/CAS. VL was difficult to determine on the irregular specimen surfaces but appeared unchanged on all failed specimens. 3D woven specimens with heat-treatment at high temperature exhibited degradation only in SWF.

Kautz, Harold E.↗

Three-dimensional analytical model for the mixed layer depth

A three-dimensional (3D) semianalytical mixed-layer thermal inertia model for the mixed layer depth is developed, which includes the horizontal advection and diffusion processes modeled previously by Yan et al. (1991) in a one-dimensional (1D) model. The 3D model, which is based on the 3D thermal energy conservation equation, can be used as a supplement to the 1D model in the area where advection is important and for a finer resolution grid prediction. The model can be easily forced by remotely sensed data and is much simpler to compute than numerical 3D mixed-layer turbulence closure models. The new model was verified using data from the AVHRR/multichannel sea surface temperature data set and the Cooperative Ocean Atmosphere Data Set for the North Pacific Ocean, showing good agreement.

Yan, Xiao-Hai↗

Numerical simulation of the subsolar magnetopause current layer in the sun-earth meridian plane

The formation and stability of the magnetopause current layer near the subsolar point in the sun-earth meridian plane are examined using a 2D electromagnetic particle simulation. For the case of zero IMF, the simulation results show that the current layer remains stable and is essentially the same as in the 1D simulation. The width of the current layer is given by the electron-ion hybrid gyroradius which is much smaller than the ion gyroradius. The current layer is found to remain stable for the northward IMF as well. As in the 1D simulation, the jump of the magnetic field at the current layer for the northward IMF remains small. For the southward IMF, collisionless magnetic reconnection is found to develop, leading to the formation of magnetic islands and density peaking within the current layer.

Okuda, H.↗

Surface finish quality of the outer AXAF mirror pair based on X-ray measurements of the VETA-I

We employ the X-ray measurements of the VETA-I taken at the X-Ray Calibration Facility (XRCF) of the Marshall Space Flight Center (MSFC) to extract information about the surface finish quality of the outermost pair of AXAF mirrors. The particular measurements we consider are 1D scans of the core of the point response function (PRF) (FWHM scans), the encircled energy as a function of radius, and 1D scans of the wings of the PRF. We discuss briefly our raytrace model which incorporates the numerous effects present in the VETA-I test, such as the finite source distance, the size and shape of the X-ray source, the residual gravitational distortions of the optic, the despace of the VETA-I, and particulate contamination. We show how the data constrain the amplitude of mirror surface deviations for spatial frequencies greater than about 0.1/mm. Constraints on the average amplitude of circumferential slope errors are derived as well.

Hughes, John P.↗

An assessment of spectral nonoscillatory schemes

A new spectral nonoscillatory interpolation scheme is proposed that achieves spectral accuracy in smooth regions and is nonoscillatory on piecewise discontinuous data. The essential idea behind the scheme is to increase the order of an ENO scheme in proportion to the number of points, wherever possible. Numerical experiments with the new scheme on interpolation, 1D advection, and 1D gas dynamics confirm the high resolution features of the scheme. Comparisons with the results of earlier spectral nonoscillatory schemes show that the new scheme is competitive both in efficiency and accuracy.

Suresh, Ambady↗

Cross-tail current - Resonant orbits

A technique to generate self-consistent 1D current sheets is described. Groups of monoenergetic protons were followed in a modified Harris magnetic field. This sample current sheet is characterized by resonant quasi-adiabatic orbits. The magnetic moment of a quasi-adiabatic ion which is injected from outside a current sheet changes substantially during the orbit but returns to almost its initial value by the time the ion leaves. Several ion and electron groups were combined to produce a plasma sheet in which the charged particles carry the currents needed to generate the magnetic field in which the orbits were traced. An electric field also is required to maintain charge neutrality. Three distinct orbit types, one involving untrapped ions and two composed of trapped ions, were identified. Limitations associated with the use of a 1D model also were investigated; it can provide a good physical picture of an important component of the cross-tail current, but cannot adequately describe any region of the magnetotail in which the principal current sheet is separated from the plasma sheet boundary layer by a nearly isotropic outer position of the central plasma sheet.

Kaufmann, Richard L.↗

Variability of (O I) 6300-A emission near Io

Observations of (O I) 6300-A emission near Io have been obtained in 1990, 1991, and 1992 by the National Solar Observatory staff using the solar-stellar spectrography on the McMath-Pierce telescope at Kitt Peak. High-resolution spectra with a resolving power of about 1.2 x 10(exp 5) were obtained with an integration time of 10-15 min each. The viewing aperture for the observations was 5.2 arc sec x 5.2 arc sec centered on Io, with spatial resolution limited within this area by seeing conditions. Observations thus far have been reduced to obtain average brightness values over the aperture which range from approximately 200 to 1000 R for a number of different Io phase angles and Io system III longitudes. The (O I) 6300-A emission brightness exhibits an east-west asymmetry, where the average intensity for Io phase angles in the west (receding ansa) is 1.5 times brighter than in the east (approaching ansa). Similar east-west intensity ratios have also been observed for neutrals near Io and ions in the plasma torus for a number of other optical and ultraviolet emission lines which are excited by electron impact. In addition to the east-west asymmetry, the (O I) 6300-A emission brightness exhibits a strong dependence on the Io system III longitude angle, with a maximum value occurring in the range 200 deg +/- 50 deg. Earlier IUE observations of ultraviolet emission lines of O and S near Io obtained over a number of years have measured the east-west asymmetry, but the long IUE integration times of approximately 7-14 hours masked any detection of system III variability. For the (O I) 6300-A emission, the O(1D) state may be excited by electron impact of atomic oxygen and by electron impact dissociation of SO. The molecule SO may be present at the exobase or may be produced above the exobase as the dominant product of SO2 dissociation by electron impact. Preliminary assessment indicates that production of O(1D) by molecular dissociation may be more important. The (O I) 6300-A emission may therefore provide a remote signature for monitoring (1) the upward transport rates of molecular species in Io's atmosphere, (2) the relative abundance and time-variable dissociation of SO2 and/or SO at the exobase and in the corona of Io, and (3) the spatial distribution of these escaping molecular and atomic species and their ion production rates in the planetary magnetosphere.

Scherb, F.↗