Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vectorization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Microstructure of the interplanetary magnetic field near 4 and 5 AU

Interplanetary magnetic field fluctuations near 4 and 5 AU are investigated on the basis of Pioneer 10 and 11 vector magnetic field measurements in order to identify extant wave modes and propagation directions as functions of frequency in the range 0.00004 to 0.009 Hz. Analysis of the approximately 500 spectral matrices as functions of frequency obtained from each spacecraft indicates the distributions of maximum variance directions to be peaked along the normal to the plane of the minimum variance direction and the mean magnetic field, as would be expected for a planar, small-amplitude Alfven wave with a minimum variance direction close to the wave vector. It is thus inferred that single small-amplitude Alfven waves are occasionally present in the temporal and frequency bands analyzed, however waves with wave vectors not well approximated by the minimum variance direction, Alfven wave ensembles, finite-amplitude waves and nonplanar fluctuations may also be present. Observations are also noted to suggest the predominance of the Alfven mode over the fast and slow modes, however do not support theoretical models of outward propagating plane Alfven waves of solar origin.

Parker, G. D.↗
NASA NTRS1980

Magsat - A new satellite to survey the earth's magnetic field

The Magsat satellite was launched on Oct. 30, 1979 into a sun-synchronous dawn-dusk orbit, of 97 deg inclination, 350 km perigee, and 550 km apogee. It contains a precision vector magnetometer and a cesium-vapor scalar magnetometer at the end of a 6-m long graphite epoxy scissors boom. The magnetometers are accurate to 2 nanotesla. A pair of star cameras are used to define the body orientation to 10 arc sec rms. An 'attitude transfer system' measures the orientation of the magnetometer sensors relative to the star cameras to approximately 5 arc sec rms. The satellite position is determined to 70 meters rms by Doppler tracking. The overall objective is to determine each component of the earth's vector magnetic field to an accuracy of 6 nanotesla rms. The Magsat satellite gathers a complete picture of the earth's magnetic field every 12 hours. The vector components are sampled 16 times per second with a resolution of 0.5 nanotesla. The data will be used by the U.S. Geological Survey to prepare 1980 world magnetic field charts and to detect large-scale magnetic anomalies in the earth's crust for use in planning resource exploration strategy.

Mobley, F. F.↗
NASA NTRS1980

The structure of correlation tensors in homogeneous anisotropic turbulence

The study of turbulence with spatially homogeneous but anisotropic statistical properties has applications in space physics and laboratory plasma physics. The first step in the systematic study of such fluctuations is the elucidation of the kinematic properties of the relevant statistical objects, which are the correlation tensors. The theory of isotropic tensors, developed by Robertson, Chandrasekhar and others, is reviewed and extended to cover the general case of turbulence with a pseudo-vector preferred direction, without assuming mirror reflection invariance. Attention is focused on two point correlation functions and it is shown that the form of the decomposition into proper and pseudo-tensor contributions is restricted by the homogeneity requirement. It is also shown that the vector and pseudo-vector preferred direction cases yield different results. An explicit form of the two point correlation tensor is presented which is appropriate for analyzing interplanetary magnetic fluctuations. A procedure for determining the magnetic helicity from experimental data is presented.

Matthaeus, W. H.↗
NASA NTRS1981

Multiobjective insensitive design of airplane control systems with uncertain parameters

A multiobjective computer-aided design algorithm has been developed which minimizes the sensitivity of the design objectives to uncertainties in system parameters. The more important uncertain parameters are described by a gaussian random vector with known covariance matrix, and a vector sensitivity objective function is defined as the probabilities that the design objectives will violate specified requirements constraints. Control system parameters are found which minimize the sensitivity vector in a Pareto-optimal sense, using constrained minimization algorithms. Example results are shown for lateral stability augmentation system (SAS) design for three Shuttle flight conditions.

Schy, A. A.↗
NASA NTRS1980

Equilibrium response of flight control systems

The steady-state behavior of an aircraft in response to control and disturbance inputs has a major impact on its performance and flying qualities, and it is, to a large extent, not readily predicted by the aircraft's stability and transient behavior. Singular as well as nonsingular response can result as a consequence of the command vector's definition, i.e., equilibrium in the command vector can imply disequilibrium in the state. The flight control structure can be modified to account for this characteristic, and it is shown that systems with identical eigenvalues and eigenvectors but dissimilar command vectors have markedly different responses.

Stengel, R. F.↗
NASA NTRS1981

Optical implementation of systolic array processing

Algorithms for matrix vector multiplication are implemented using acousto-optic cells for multiplication and input data transfer and using charge coupled devices detector arrays for accumulation and output of the results. No two dimensional matrix mask is required; matrix changes are implemented electronically. A system for multiplying a 50 component nonnegative real vector by a 50 by 50 nonnegative real matrix is described. Modifications for bipolar real and complex valued processing are possible, as are extensions to matrix-matrix multiplication and multiplication of a vector by multiple matrices.

Caulfield, H. J.↗
NASA NTRS1975

Stochastic control system parameter identifiability

The parameter identification problem of general discrete time, nonlinear, multiple input/multiple output dynamic systems with Gaussian white distributed measurement errors is considered. The knowledge of the system parameterization was assumed to be known. Concepts of local parameter identifiability and local constrained maximum likelihood parameter identifiability were established. A set of sufficient conditions for the existence of a region of parameter identifiability was derived. A computation procedure employing interval arithmetic was provided for finding the regions of parameter identifiability. If the vector of the true parameters is locally constrained maximum likelihood (CML) identifiable, then with probability one, the vector of true parameters is a unique maximal point of the maximum likelihood function in the region of parameter identifiability and the constrained maximum likelihood estimation sequence will converge to the vector of true parameters.

Lee, C. H.↗
NASA NTRS1982

Tests and analysis of a vented D thrust deflecting nozzle on a turbofan engine

The objectives were to: obtain nozzle performance characteristics in and out of ground effects; demonstrate the compatibility of the nozzle with a turbofan engine; obtain pressure and temperature distributions on the surface of the D vented nozzle; and establish a correlation of the nozzle performance between small scale and large scale models. The test nozzle was a boilerplate model of the MCAIR D vented nozzle configured for operation with a General Electric YTF-34-F5 turbofan engine. The nozzle was configured to provide: a thrust vectoring range of 0 to 115 deg; a yaw vectoring range of 0 to 10 deg; variable nozzle area control; and variable spacing between the core exit and nozzle entrance station. Compatibility between the YTF-34-T5 turbofan engine and the D vented nozzle was demonstrated. Velocity coefficients of 0.96 and greater were obtained for 90 deg of thrust vectoring. The nozzle walls remained cool during all test conditions.

Roseberg, E. W.↗
NASA NTRS1982

Guidelines for developing vectorizable computer programs

Some fundamental principles for developing computer programs which are compatible with array-oriented computers are presented. The emphasis is on basic techniques for structuring computer codes which are applicable in FORTRAN and do not require a special programming language or exact a significant penalty on a scalar computer. Researchers who are using numerical techniques to solve problems in engineering can apply these basic principles and thus develop transportable computer programs (in FORTRAN) which contain much vectorizable code. The vector architecture of the ASC is discussed so that the requirements of array processing can be better appreciated. The "vectorization" of a finite-difference viscous shock-layer code is used as an example to illustrate the benefits and some of the difficulties involved. Increases in computing speed with vectorization are illustrated with results from the viscous shock-layer code and from a finite-element shock tube code. The applicability of these principles was substantiated through running programs on other computers with array-associated computing characteristics, such as the Hewlett-Packard (H-P) 1000-F.

Miner, E. W.↗
NASA NTRS1981

Tactical STOL moment balance through innovative configuration technology

Innovative and conventional thrust vectoring moment balance mechanisms, as applied to advanced tactical fighters, are examined. The innovative mechanisms include thrust line translation, life line translation, and auxiliary power control; the conventional mechanisms under investigation are horizontal tails, canards, and variable sweep wings. These mechanisms are tested for their ability to provide negative static margins for landing approach or relocation of the vectored thrust line nearer the aircraft's center of gravity. The net pitching moment due to wing, flaps, and vectored thrust lift would then be small, making possible beneficial trim forces from small trimming devices. These innovative mechanisms are, however, possibly heavy and must be evaluated on their complexity, reliability, maintainability, and STOL capabilities. Several candidate fighter configurations are compared and evaluated.

Eckard, G. J.↗
NASA NTRS1982

Adaptive arrays - A new approach to the steady-state analysis

A closed-form expression for the steady-state output signal-to-noise ratio (SNR) of an n-element adaptive array excited by one desired narrow-band signal and K - 1 narrow-band jammers is obtained. This is facilitated by representing each excitation by a complex n-dimensional vector - the excitation vector. It is shown that the important system parameters are functions of scalar products of pairs of these excitation vectors. In particular, the normalized output SNR of the array is shown to be the ratio of determinants whose elements involve these scaler products. Such determinants are also shown to be involved in the expressions for the optimal array weights.

Zohar, S.↗
NASA NTRS1981

Bifurcation and post-buckling analysis of laminated composite plates via reduced basis technique

A reduced basis technique and a problem-adaptive computational algorithm are presented for the bifurcation and post-buckling analysis of laminated anisotropic plates. The computational algorithm can be conveniently divided into three distinct stages. The first stage is that of determining the bifurcation point. The plate is discretized by using displacement finite element (or finite difference) models. The special symmetries exhibited by the response of the anisotropic plate are used to reduce the size of the analysis region. The vector of unknown nodal parameters is expressed as a linear combination of a small number of basis vectors, and a Rayleigh-Ritz technique is used to approximate the finite element equations by a small system of algebraic equations. The reduced equations are used to determine the bifurcation point and the associated eigenmode of the panel. In the second stage of the bifurcation buckling mode is used to obtain a nonlinear solution in the vicinity of the bifurcation point and new (updated) sets of basis vectors and reduced equations are generated. In the third stage the reduced equations are used to trace the post-buckling paths. The effectiveness of the proposed technique for predicting the bifurcation and post-buckling behavior of plates is demonstrated by means of numerical examples for plates loaded by means of prescribed edge displacements.

Noor, A. K.↗
NASA NTRS1982

The Magsat mission

The cesium-vapor scalar and fluxgate vector magnetometers aboard the Magsat spacecraft, which has a twilight, sun-synchronous orbit with a 96.76-deg inclination, have together measured the earth's magnetic field magnitude to accuracies better than 2 nT, and the magnitude of each field component to better than 6 nT. The magnetometers are located at the end of a boom to isolate them from the effects of spacecraft fields, and an optical system was used to measure the attitude of the vector magnetometer and sun sensor at the boom relative to the two star cameras of the main spacecraft structure. The data gathered is available from the National Space Science Data Center in several formats and is currently undergoing analysis. Scalar and vector error budget values are given for the spacecraft's five error sources, which include the instrument, position and time errors, digitization noise, attitude errors, and spacecraft fields.

Langel, R.↗
NASA NTRS1981

A new parameterization of polar motion

The rotational motion of the earth is decomposed into spin, polar motion and local motions. The rotation vector components are associated to phenomena such as precession, nutation, diurnal spin, polar motion and local motions. The above decomposition is accomplished without refering to an earth-fixed CIO pole or BIH zero meridian. The time-like variations of the coordinates of a surface point in a geocentric equatorial reference frame are presented as a function of the rotation vector components. In the rigid earth approximation three scalar parameters are necessary for evaluating point coordinate variations, namely spin rate of the earth, polar motion magnitude and spin rate of the polar motion vector. Two numerical examples are given as an illustration.

Papo, H. B.↗
NASA NTRS1982

Experiences in using the CYBER 203 for three-dimensional transonic flow calculations

In this paper, the authors report on some of their experiences modifying two three-dimensional transonic flow programs (FLO22 and FLO27) for use on the NASA Langley Research Center CYBER 203. Both of the programs discussed were originally written for use on serial machines. Several methods were attempted to optimize the execution of the two programs on the vector machine, including: (1) leaving the program in a scalar form (i.e., serial computation) with compiler software used to optimize and vectorize the program, (2) vectorizing parts of the existing algorithm in the program, and (3) incorporating a new vectorizable algorithm (ZEBRA I or ZEBRA II) in the program.

Melson, N. D.↗
NASA NTRS1982

Manufacturing in space: Fluid dynamics numerical analysis

Numerical computations were performed for natural convection in circular enclosures under various conditions of acceleration. It was found that subcritical acceleration vectors applied in the direction of the temperature gradient will lead to an eventual state of rest regardless of the initial state of motion. Supercritical acceleration vectors will lead to the same steady state condition of motion regardless of the initial state of motion. Convection velocities were computed for acceleration vectors at various angles of the initial temperature gradient. The results for Rayleigh numbers of 1000 or less were found to closely follow Weinbaum's first order theory. Higher Rayleigh number results were shown to depart significantly from the first order theory. Supercritical behavior was confirmed for Rayleigh numbers greater than the known supercritical value of 9216. Response times were determined to provide an indication of the time required to change states of motion for the various cases considered.

Robertson, S. J.↗
NASA NTRS1983

Use of CYBER 203 and CYBER 205 computers for three-dimensional transonic flow calculations

Experiences are discussed for modifying two three-dimensional transonic flow computer programs (FLO 22 and FLO 27) for use on the CDC CYBER 203 computer system. Both programs were originally written for use on serial machines. Several methods were attempted to optimize the execution of the two programs on the vector machine: leaving the program in a scalar form (i.e., serial computation) with compiler software used to optimize and vectorize the program, vectorizing parts of the existing algorithm in the program, and incorporating a vectorizable algorithm (ZEBRA I or ZEBRA II) in the program. Comparison runs of the programs were made on CDC CYBER 175. CYBER 203, and two pipe CDC CYBER 205 computer systems.

Melson, N. D.↗
NASA NTRS1983

The inference of tropical cyclone dynamics using GOES VISSR/VAS data

The sequence of events observed during tropical cyclone Emily, was suggested as a possible mechanism for cyclogenesis. Geostationary Operational Environmental Satellite (GOES) East VISSR/VAS sensors were used. The VISSR visible imagery obtained every 15 minutes was used to define the low tropospheric cyclonic vortex and upper tropospheric horizontal convergence. The VAS water vapor (channels 9 and 10) and carbon dioxide (channels 3 and 4) channels were used to infer upper and middle tropospheric subsidence by monitoring the Adiabatic compressional drying and warming, respectively, occurring within this layer. Evidence of an existing lower tropospheric cyclonic vortex was seen. The satellite derived wind vectors (length of vector is proportional to wind velocity, where the strongest winds were approximately 35 knots) are superimposed on the GOES visible image of tropical storm Emily. Vectors and low level clouds depict the center of the cyclonic vortex immediately south of the large convective cell in the center of the image. Upper tropospheric cloud tracers and rawinsonde reports along the Eastern United States suggest that the southwesterly environmental upper atmospheric flow is converging with the outflow from the convective cell north of the vortex.

Rodgers, E. B.↗