Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “utility scale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Massively parallel GPU enabled third-order cluster perturbation excitation energies for cost-effective large scale excitation energy calculations

We present here a massively parallel implementation of the recently developed CPS(D-3) excitation energy model that is based on cluster perturbation theory. The new algorithm extends the one developed in Baudin et al. [J. Chem. Phys., 150, 134110 (2019)] to leverage multiple nodes and utilize graphical processing units for the acceleration of heavy tensor contractions. Furthermore, we show that the extended algorithm scales efficiently with increasing amounts of computational resources and that the developed code enables CPS(D-3) excitation energy calculations on large molecular systems with a low time-to-solution. More specifically, calculations on systems with over 100 atoms and 1000 basis functions are possible in a few hours of wall clock time. This establishes CPS(D-3) excitation energies as a computationally efficient alternative to those obtained from the coupled-cluster singles and doubles model.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Atomic Scale Crystal Field Mapping of Polar Vortices in Oxide Superlattices

Polar vortices in oxide superlattices can be utilized as potential candidates for data storage applications due to their unique polarization topologies. The structure and dipole arrangement in polar vortices has been studied via X-ray scattering techniques, (scanning) transmission electron microscopy ((S)/TEM) and computational calculations. However, the fundamental correlation between the atomic structure and the electronic structure (which is manifested in the chemical bonding) has heretofore not been explored. Further, The hybridization between nominally empty $\textit{d}$ orbitals on the B-site with the occupied O 2$\textit{p}$ orbitals favors the condensation of a polar (ferroelectric) state in $\textit{AB}$O 3 perovskite oxides. The complex, continuously rotating local polarization texture of the vortices, in turn, can result in especially intricate $\textit{d}$- orbital interactions. Soft X-ray spectroscopy can probe these interactions at the transition metal $\textit{L}$-edge, but these techniques do not have the spatial resolution to resolve variations within one vortex (~5 nm region). Electron energy loss spectroscopy (EELS) in the STEM mode uses inelastically scattered electrons to probe the core-shell excitations (empty density of states) of transition metals at atomic resolution.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1994

X-ray clusters in a cold dark matter + lambda universe: A direct, large-scale, high-resolution, hydrodynamic simulation

A new, three-dimensional, shock-capturing, hydrodynamic code is utilized to determine the distribution of hot gas in a cold dark matter (CDM) + lambda model universe. Periodic boundary conditions are assumed: a box with size 85/h Mpc, having cell size 0.31/h Mpc, is followed in a simulation with 270(exp 3) = 10(exp 7.3) cells. We adopt omega = 0.45, lambda = 0.55, h identically equal to H/100 km/s/Mpc = 0.6, and then, from the cosmic background explorer (COBE) and light element nucleosynthesis, sigma(sub 8) = 0.77, omega(sub b) = 0.043. We identify the X-ray emitting clusters in the simulation box, compute the luminosity function at several wavelength bands, the temperature function and estimated sizes, as well as the evolution of these quantities with redshift. This open model succeeds in matching local observations of clusters in contrast to the standard omega = 1, CDM model, which fails. It predicts an order of magnitude decline in the number density of bright (h nu = 2-10 keV) clusters from z = 0 to z = 2 in contrast to a slight increase in the number density for standard omega = 1, CDM model. This COBE-normalized CDM + lambda model produces approximately the same number of X-ray clusters having L(sub x) greater than 10(exp 43) erg/s as observed. The background radiation field at 1 keV due to clusters is approximately the observed background which, after correction for numerical effects, again indicates that the model is consistent with observations.

Cen, Renyue↗
DOE OSTI2024

Real-Time KMC Simulation of Vacancy-Mediated Intermixing in Au@Ag Octahedral Core–Cubic Shell Nanocrystals with Ab Initio-Guided Kinetics

Utilization of core–shell rather than monometallic nanocrystals (NCs) facilitates fine-tuning of NC properties for applications. However, compositional evolution via intermixing can degrade these properties prompting recent experimental studies. We develop an atomistic-level stochastic model for vacancy-mediated intermixing exploiting a formalism which allows incorporation at an ab initio density functional theory level of not just the thermodynamics of vacancy formation, but also relevant diffusion barriers for a vast number of possible local environments (in the core and in the shell, at the interface, and in the intermixed phase). This facilitates a predictive treatment and comprehensive understanding of intermixing on the relevant time scale (e.g., 10 1 –10 3 s). In contrast, previous modeling at the atomistic level utilized only unrealistic generic prescriptions of barriers or employed simplified continuum treatments. For Au@Ag octahedral core–cubic shell NCs, our modeling not only captures the experimentally observed rate or time scale for intermixing of ~100 s at 450 °C for 60 nm NCs, but also elucidates the underlying rate controlling processes and the effective intermixing barrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Self-assembly of wood-based shape memory composites triggered by solar-thermal energy

Transporting and assembling large, complex structures poses significant challenges due to their size, geometry, and cost. Additionally, the installation sites are often inaccessible or hazardous for humans, necessitating self-assembling capabilities in these structures. To mitigate these challenges, we propose using 3D printing materials with shape memory effect (SME) for both transport and construction. This approach involves developing 3D modular components into flat sheets for easier transportation, and then self-assembling into 3D structures on-site using solar energy. To gain a deeper understanding of the factors influencing material memory performance, we have chosen a composite PLA/WF, which is polylactic acid (PLA) with 20 wt% wood flour (WF) for this purpose, leveraging its high tensile modulus at 0.966 GPa, low cost, and sustainability. Printed shapes with this material can maintain a recovery ratio over 90% after 3 cycles. While traditional composites fillers (e.g. glass or carbon fiber) are added to enhance mechanical and thermal properties, the addition of bio-based fillers like WF accomplish similar goals without compromising sustainability. We conducted multiple experiments to demonstrate how environmental conditions (i.e. temperature) maximize the material’s SME. Although still at an early stage, this study provides initial insights into bridging the gap between the small-scale nature of shape memory polymers (SMPs) and their potential for large-scale additive manufacturing, addressing a critical need for efficient and sustainable construction. In the long term, we hope our study contributes to the design vision of utilizing SMPs for transportation, assembly, and deployment of complex structures, providing a new pathway for sustainable construction and transportation of large-scale structures to hard-to-access locations such as disaster-affected areas and remote deserts, etc.

4D printing↗
DOE OSTI2023

Bench-Scale Testing of a High Efficiency, Ultra-Compact Process for Pre-Combustion CO 2 Capture (Final Report)

The overarching objective of this bench-scale study is to field-validate the technical feasibility of a membrane- and adsorption-enhanced water gas shift (WGS) reaction process that employs a carbon molecular sieve (CMS) membrane reactor (MR) followed by an adsorption reactor (AR) for pre-combustion CO 2 capture while demonstrating progress towards achievement of the overall performance goals of CO 2 capture with 95% CO 2 purity at a cost of electricity (COE) of 30% less than the baseline capture approaches. The main goal of this bench-scale project is to advance the proposed MR-AR transformative CO 2 capture technology to a sufficient maturity level so that our present industrial partners (M&PT and Worley) can potentially adapt the technology for further small pilot-scale testing. The project began at TRL 4, as the system prototype had already been validated in the laboratory on simulated syngas (as part of project DE-FE0026423). The project ended at TRL 5, via scaling-up of the prototype system and testing it on actual syngas at a host site (CAER at the University of Kentucky (UKy)). The project was carried-out in two different phases: In Phase I (during BP1 of the project), the team designed, constructed, and assembled the bench-scale experimental MR-AR system, prepared the membranes, adsorbents, and catalysts, tested the bench-scale unit with simulated syngas to validate functionality, and prepared a preliminary TEA of the technology. In Phase II (during BP2 of the project), the team installed the unit at the test site at the UKy site and completed all utility connections and hookups, field-tested the novel MR-AR process in the bench-scale system using real syngas, collected and analyzed experimental data, and completed a detailed TEA of the technology. A key aim of the project was to identify and address the technical and process risks and to generate information to advance the technology to the next stage of development. All project milestones and success criteria were met. Specifically, the team: (i) designed, constructed and assembled a bench scale system that handled 1 – 5 scfm syngas and tested its functionality with simulated syngas; (ii) prepared high performance CMS membrane tubes (ID: 3.5 mm, OD: 5.7 mm, 30” long) that meet the target H 2 permeance ( > 1 m 3 /(m 2 .hr.bar) or (> 370.3 GPU)) and a target H 2 /CO selectivity >80 at the relevant temperature (up to 300oC) and pressure conditions (up to 25 bar) with a <10% decline in performance over each 250 hr. testing period (iii) procured commercial sour-shift catalyst in sufficient quantity and prepared up to 10 kg of pelletized adsorbent for use at relevant conditions (250oC 2.5wt.% and target sorbent attrition rate < 0.2; (iv) installed the bench-scale unit at the test site (UKy) and tested the MR-AR technology using real syngas for over 250 hr. for both static and flow experiments; (v) updated the TEA analysis based on bench-scale data and met CO 2 capture goals of 95% CO 2 purity at a cost of electricity 30% less than baseline capture approaches. The CMS membranes, HTC adsorbents and catalysts employed all exhibited very robust and stable performance during the long-term run (over a >250 hr live syngas run). Furthermore, the proposed MR-AR IGCC system achieved a LCOE with a N 2 sale price of $\$$ 30/ton, with N 2 compression (no N 2 compression) of 101.2 $\$$/MWh (95.3 $\$$/MWh), which represents a 29.8% (33.9%) LCOE reduction in the baseline IGCC with carbon capture of 144.2 $\$$/MWh. The proposed MR-AR IGCC delivers a CO 2 capture cost of 44.8 $\$$/tonne (39.9 $\$$/tonne) vs 98.1 $\$$/tonne of the baseline capture case and a net power production of 586 MWe (623 MWe) vs 556 MWe of the baseline capture case.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

The Utility of Macroecological Rules for Microbial Biogeography

Macroecological rules have been developed for plants and animals that describe large-scale distributional patterns and attempt to explain the underlying physiological and ecological processes behind them. Similarly, microorganisms exhibit patterns in relative abundance, distribution, diversity, and traits across space and time, yet it remains unclear the extent to which microorganisms follow macroecological rules initially developed for macroorganisms. Additionally, the usefulness of these rules as a null hypothesis when surveying microorganisms has yet to be fully evaluated. With rapid advancements in sequencing technology, we have seen a recent increase in microbial studies that utilize macroecological frameworks. Here, we review and synthesize these macroecological microbial studies with two main objectives: (1) to determine to what extent macroecological rules explain the distribution of host-associated and free-living microorganisms, and (2) to understand which environmental factors and stochastic processes may explain these patterns among microbial clades (archaea, bacteria, fungi, and protists) and habitats (host-associated and free living; terrestrial and aquatic). Overall, 78% of microbial macroecology studies focused on free living, aquatic organisms. In addition, most studies examined macroecological rules at the community level with only 35% of studies surveying organismal patterns across space. At the community level microorganisms often tracked patterns of macroorganisms for island biogeography (74% confirm) but rarely followed Latitudinal Diversity Gradients (LDGs) of macroorganisms (only 32% confirm). However, when microorganisms and macroorganisms shared the same macroecological patterns, underlying environmental drivers (e.g., temperature) were the same. Because we found a lack of studies for many microbial groups and habitats, we conclude our review by outlining several outstanding questions and creating recommendations for future studies in microbial ecology.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

A review of Geological Thermal Energy Storage for seasonal, grid-scale dispatching

Energy storage is essential for the decarbonization of the U.S. energy grid, especially with the increasing deployment of variable renewable energy sources like solar and wind. Geological thermal energy storage (GeoTES) has emerged as a promising long duration, grid scale solution, providing stability and security through flexible operations and valuable grid services. GeoTES utilizes subsurface reservoirs to store thermal energy for power generation and direct-use heating and cooling. This approach significantly enhances the use of low-temperature reservoirs, which would otherwise be unsuitable for geothermal power plants. It also aligns well with depleted oil and gas reservoirs, concentrating solar power, non-flexible renewables (photovoltaic and wind), and geothermal-related power cycles. Given the favorable marginal costs of GeoTES as storage duration increases, it becomes particularly competitive for seasonal, grid-scale dispatch, where few technologies are viable. This paper provides a comprehensive review of GeoTES systems and the research underpinning itsr development. This analysis begins by defining and categorizing the unique characteristics of thermal energy storage techniques, setting GeoTES apart from other technologies. The various components, configurations, subsurface characteristics, and modeling efforts that guide GeoTES development are then explored. Finally, challenges in GeoTES research, development, and deployment are discussed, along with mitigation strategies and lessons from related technologies. Beyond their economic benefits, GeoTES systems support grid resilience and decarbonize industrial processes. Their scalability, broad distribution, seasonal storage potential, and flexible dispatch capacity make GeoTES a valuable tool for expanding renewable energy deployment and addressing climate change.

15 - GEOTHERMAL ENERGY↗
DOE OSTI2023

Engineering a modular 44 Ti/ 44 Sc generator: eluate evaluation in preclinical models and estimation of human radiation dosimetry

Background: 44 Sc/ 47 Sc is an attractive theranostic pair for targeted in vivo positron emission tomographic (PET) imaging and beta-particle treatment of cancer. The 44 Ti/ 44 Sc generator allows daily onsite production of this diagnostic isotope, which may provide an attractive alternative for PET facilities that lack in-house irradiation capabilities. Early animal and patient studies have demonstrated the utility of 44 Sc. In our current study, we built and evaluated a novel clinical-scale 44 Ti/ 44 Sc generator, explored the pharmacokinetic profiles of 44 ScCl 3 , [ 44 Sc]-citrate and [ 44 Sc]-NODAGA (1,4,7-triazacyclononane,1-glutaric acid-4,7-acetic acid) in naïve mice, and estimated the radiation burden of 44 ScCl 3 in humans. Methods: 44 Ti/ 44 Sc (101.2 MBq) in 6 M HCl solution was utilized to assemble a modular ZR resin containing generator. After assembly, 44 Sc was eluted with 0.05 M HCl for further PET imaging and biodistribution studies in female Swiss Webster mice. Based on the biodistribution data, absorbed doses of 44 / 47 ScCl 3 in human adults were calculated for 18 organs and tissues using the IDAC-Dose software. Results: 44 Ti in 6 M HCl was loaded onto the organic resin generator with a yield of 99.97%. After loading and initial stabilization, 44 ScCl 3 was eluted with 0.05 M HCl in typical yields of 82.9 ± 5.3% (N = 16), which was normalized to the estimated generator capacity. Estimated generator capacity was computed based on elution time interval and the total amount of 44 Ti loaded on the generator. Run in forward and reverse directions, the 44 Sc/ 44 Ti ratio from a primary column was significantly improved from 1038 ± 440 to 3557 ± 680 (Bq/Bq) when a secondary, replaceable, ZR resin cartridge was employed at the flow outlet. In vivo imaging and ex vivo distribution studies of the reversible modular generator for 44 ScCl 3 , [ 44 Sc]-citrate and [ 44 Sc]-NODAGA show that free 44 Sc remained in the circulation significantly longer than the chelated 44 Sc. The dose estimation of 44 ScCl 3 reveals that the radiation burden is 0.146 mSv/MBq for a 70 kg adult male and 0.179 mSv/MBq for a 57 kg adult female. Liver, spleen and heart wall will receive the highest absorbed dose: 0.524, 0.502, and 0.303 mGy/MBq, respectively, for the adult male. Conclusions: A clinical-scale 44 Ti/ 44 Sc generator system with a modular design was developed to supply 44 ScCl 3 in 0.05 M HCl, which is suitable for further radiolabeling and in vivo use. Our data demonstrated that free 44 ScCl 3 remained in the circulation for extended periods, which resulted in approximately 10 times greater radiation burden than stably chelated 44 Sc. Stable 44 Sc/ 47 Sc-complexation will be more favorable for in vivo use and for clinical utility.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2020

Learning compact physics‐aware delayed photocurrent models using dynamic mode decomposition

Abstract Radiation‐induced photocurrent in semiconductor devices can be simulated using complex physics‐based models, which are accurate, but computationally expensive. This presents a challenge for implementing device characteristics in high‐level circuit simulations where it is computationally infeasible to evaluate detailed models for multiple individual circuit elements. In this work we demonstrate a procedure for learning compact delayed photocurrent models that are efficient enough to implement in large‐scale circuit simulations, but remain faithful to the underlying physics. Our approach utilizes dynamic mode decomposition (DMD), a system identification technique for learning reduced‐order discrete‐time dynamical systems from time series data based on singular value decomposition. To obtain physics‐aware device models, we simulate the excess carrier density induced by radiation pulses by solving numerically the ambipolar diffusion equation, then use the simulated internal state as training data for the DMD algorithm. Our results show that the significantly reduced‐order delayed photocurrent models obtained via this method accurately approximate the dynamics of the internal excess carrier density—which can be used to calculate the induced current at the device boundaries—while remaining compact enough to incorporate into larger circuit simulations.

Hanson, Joshua↗
DOE OSTI2025

Material extrusion with integrated compression molding of NdFeB/SmFeN nylon bonded magnets using small- and large-scale pellet-based 3D-printers

High-density bonded rare-earth magnets are manufactured using pellet-fed additive manufacturing (AM)/material extrusion and an integrated additive manufacturing-compression molding (AM-CM) process. Neodymium iron boron – samarium iron nitride in polyamide 12 (NdFeB-SmFeN/PA12) of 93 % weight fraction (65 % volume fraction) are used for the study. The mechanical properties (tensile strength and modulus), magnetic properties (maximum energy density, coercivity, remanence) are reported. Manufacturing parameters such as layer height, barrel temperatures, screw speed and gantry feed rate are optimized to obtain the highest possible density of the magnets using a small-scale desktop material extrusion printer. Large scale integrated additive manufacturing-compression molding (AM-CM) is then utilized to increase the density of the magnets by reducing porosity defects common in the material extrusion process. The density of as-printed magnets was 5.2 g/cm 3 with a BH max value of 124.14 kJ/m 3 , tensile strength of 20 MPa and a modulus of 2 GPa. AM-CM increased the density of the compound by 5.5 % (5.49 g/cm 3 ). The reduction in porosity was confirmed using X-ray tomography (XCT). Improvement in mechanical strength of the material was also observed, with an increase in tensile strength of 25 % (25.09 MPa) and increase in tensile modulus of 275 % (5.49 GPa). Scanning electron microscopy showed increased particle-matrix adhesion with the integrated AM-CM process.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multichannel Analysis of Surface Waves Accelerated (MASWAccelerated): Software for efficient surface wave inversion using MPI and GPUs

Multichannel Analysis of Surface Waves (MASW) is a technique frequently used in geotechnical engineering and engineering geophysics to infer 1D layered models of seismic shear wave velocities in the top tens to hundreds of meters of the subsurface. We aim to accelerate MASW calculations by capitalizing on modern computer hardware available in the workstations of most engineers: multiple cores and graphics processing units (GPUs). We propose new parallel and GPU accelerated algorithms for computing 1D MASW inversion, and provide software implementations in C using Message Passing Interface (MPI) and CUDA. These algorithms take advantage of sparsity that arises in the problem, and the work balance between processes considers typical data trends. We compare our methods to an existing open source Matlab MASW tool. Our serial C implementation achieves a 2x speedup over the Matlab software, and we continue to see improvements by parallelizing the problem with MPI. Here we see nearly perfect strong and weak scaling for uniform data, and improve strong scaling for realistic data by repartitioning the problem to process mapping. By utilizing GPUs available on most modern workstations, we observe an additional 1.3x speedup over the serial C implementation on the first use of the method. We typically repeatedly evaluate theoretical dispersion curves as part of an optimization procedure, and on the GPU the kernel can be cached for faster reuse on later runs. We observe a 3.2x speedup on the cached GPU runs compared to the serial C runs. This work is the first open-source parallel or GPU-accelerated software tool for MASW imaging, and should enable geotechnical engineers to fully utilize all computer hardware at their disposal.

58 GEOSCIENCES↗
DOE OSTI2022

Characterizing vertical upper ocean temperature structures in the European Arctic through unsupervised machine learning

In-situ observations of subsurface ocean temperatures are, in many regions, inconsistently distributed in time and space. These spatio-temporal inconsistencies in the observational network lead to difficulties in utilizing those observations effectively for ocean model evaluation or understanding larger-scale ocean characteristics. Model accuracy of subsurface ocean characteristics is especially important within regions that contain complex ocean structures. One such region is the European Arctic which not only contains several types of water masses with unique characteristics, but also wintertime sea ice coverage and complex bathymetry. This study presents an unsupervised neural networking technique that can be used in combination with traditional ocean model evaluation techniques to provide additional information on the accuracy of modeled vertical ocean temperature profiles. Self-organizing maps is an unsupervised machine learning technique that we apply to approximately twenty thousand Argo and CTD temperature profiles from 2012 to 2020 in the European Arctic to categorize the observed vertical ocean temperature structures in the top 150 m. The observed ocean profile categories, or neurons, defined by the self-organizing map show strong spatial and temporal dependencies. We then use the neuron weights, or the learned temperature profile structure of each neuron, to validate the spatial and temporal variability of modeled vertical temperature structures. This analysis gives us new insights about the model’s capabilities to reproduce specific vertical structures of the top-most ocean layer within different regions and seasons. Mapping modeled ocean temperature profiles onto the neuron-space of the observationally-defined self organized map highlights the potential of this method to advance our understanding of model deficiencies in that region.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Discovering and Demonstrating a Novel High-Performing 2D-Patterned Electrode for Proton-Exchange Membrane Water Electrolysis Devices

Proton-exchange membrane water electrolysis (PEMWE) produces hydrogen with high efficiency and purity but uses high-loading platinum-group metal (PGM) catalysts. Such concerns call for the development of novel electrode architectures to improve catalyst utilization and mass activity, thus promoting PEMWE cost competitiveness for large-scale implementation. In this study, we demonstrated, for the first time, a novel two-dimensional (2D)-patterned electrode with edge effects to address these challenges. The edge effect was induced by membrane properties, potential distribution, and counter electrode coverage and could be optimized by tuning the catalyst layer dimensions. To achieve identical PEMWE performance, the optimal pattern saved the 21% anode PGM catalyst compared with the conventional catalyst fully covered electrode. The PGM catalyst could be further reduced by 61% to boost mass activity with no significant performance loss. The results also indicated that the electrode uniformity in PEMWE cells might not be as critical as that in PEM fuel cells. Finally, the novel 2D-patterned electrode could effectively reduce PGM catalyst loading, accelerating affordable and large-scale production of hydrogen and other value-added chemicals via electrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Heterolytic Hydrogen Activation: Understanding Support Effects in Water–Gas Shift, Hydrodeoxygenation, and CO Oxidation Catalysis

Identifying the role of oxide supports in transition metal catalysis is critical toward our understanding of heterogeneous catalysis. The water-gas shift (WGS) reaction is a prototypical example where oxide support dictates catalytic activity, yet the cause for this remains uncertain. Herein, we show that a single descriptor—the equilibrium constant for hydroxyl formation—relates the WGS turnover frequency across disparate oxide supports. The dissimilar equilibrium constant, or oxophilicity, between early and late transition metals exemplify the utility of metal-support interfacial sites to circumvent adsorption-energy scaling restrictions, thereby providing bifunctional gains for the WGS reaction class. In relation, the equilibrium constant for hydroxyl formation is equivalent to the equilibrium constant for the formal heterolytic dissociation of hydrogen, and therefore, reflects the ability of the metal-support interface to participate in hydrogen heterolysis. The ubiquitous coexistence, yet divergent chemical behavior of homo- and heterolytically activated hydrogen renders oxide support identity central toward our understanding of hydrogenation catalysis. This work was supported by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences and performed at the Environmental Molecular Sciences Laboratory in (EMSL), which is a DOE Office of Science User Facility located at the Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for DOE by Battelle. Computational resources were provided by a user proposal at the National Energy Research Scientific Computing Center (NERSC), a DOE Office of Science User Facility. N.N. would like to thank Oliver Y. Gutierrez for critical feedback during the final stage of manuscript preparation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Exploiting heat transfer to achieve efficient photoelectrochemical CO 2 reduction under light concentration

Photoelectrochemical (PEC) conversion of carbon dioxide into valuable chemicals and fuels represents a promising path towards combating anthropogenic CO 2 emissions. However, the limited conversion efficiencies, operation lifetimes and CO 2 utilization efficiencies of PEC devices currently prohibit their application beyond the laboratory scale. Here, a wireless device converting CO 2 and water into carbon monoxide and hydrogen at a peak solar conversion efficiency exceeding 16% under an illumination intensity of 5 suns is demonstrated. A CO/H 2 product ratio between 10–20 is measured during a 17 h stability test. Fluctuations in device performance are rigorously analyzed via deconvolution of electrochemical and photoabsorber contributions. Furthermore, it is demonstrated that beneficial heat dissipation is enabled by wireless integration of the photoabsorber and electrocatalyst components, accounting for roughly 10% of the achieved conversion efficiency, an achievement unattainable with physically separated photoabsorber and electrolyzer components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Grid-based minimization at scale: Feldman-Cousins corrections for light sterile neutrino search

High Energy Physics (HEP) experiments generally employ sophisticated statistical methods to present results in searches of new physics. In the problem of searching for sterile neutrinos, likelihood ratio tests are applied to short-baseline neutrino oscillation experiments to construct confidence intervals for the parameters of interest. The test statistics of the form Δχ2 is often used to form the confidence intervals, however, this approach can lead to statistical inaccuracies due to the small signal rate in the region-of-interest. In this paper, we present a computational model for the computationally expensive Feldman-Cousins corrections to construct a statistically accurate confidence interval for neutrino oscillation analysis. The program performs a grid-based minimization over oscillation parameters and is written in C++. Our algorithms make use of vectorization through Eigen3, yielding a single-core speed-up of 350 compared to the original implementation, and achieve MPI data parallelism by employing DIY. We demonstrate the strong scaling of the application at High-Performance Computing (HPC) sites. We utilize HDF5 along with HighFive to write the results of the calculation to file.

Wospakrik, Marianette↗
DOE OSTI2024

Tracking animal movements via collaborative acoustic telemetry networks: Multiscale habitat use, phenology, and management insights

Abstract Estuaries support diverse fish and invertebrate communities, including resident species that rely on estuarine habitats year‐round and transient migratory species. The unique movement patterns of these animals connect habitats within and far beyond the estuary and are integrally linked to fisheries management objectives. With a focus on Chesapeake Bay, this study leveraged data from collaborative acoustic telemetry networks in the northwest Atlantic to assess habitat use and phenology of movements for seven species of fish (cownose rays, dusky sharks, smooth dogfish, alewife, striped bass, common carp, and blue catfish) and one invertebrate (horseshoe crabs). A total of 288 acoustically tagged individuals were detected >3.2 million times (6,743 to 2,095,717 detections per species) on receivers across ~20.5 degrees of latitude spanning the North American Atlantic seaboard from Florida, USA, to New Brunswick, Canada. Common metrics of movement and phenology grouped these species as resident (common carp, blue catfish, horseshoe crabs), primarily resident in estuaries (juvenile striped bass), and coastal migrant (cownose rays, dusky sharks, smooth dogfish, alewife); maximum distance traveled varied by three orders of magnitude among these species. Further analysis of phenology for coastal migrants elucidated the timing and duration of these species' use of Chesapeake Bay. Collectively, movements linked habitats within Chesapeake Bay and connected the estuary to coastal ecosystems both to the north (e.g., alewife) and south (e.g., cownose rays), creating networks of fisheries management jurisdictions that varied in complexity and identified opportunities for enhancement to current management or co‐management of some species. Our results elucidate the importance of estuaries to species with diverse movement behaviors, identify scales and pathways of habitat connectivity via animal movements, and highlight the utility of collaborative acoustic telemetry networks for quantifying movements relevant to both ecological research and fisheries management.

Livernois, Mariah C.↗