Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hardness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Design of high-efficiency, radiation-hard, GaInP/GaAs solar cells

In recently years, Ga(0.5)In((0.5)P/GaAs cells have drawn increased attention both because of their high efficiencies and because they are well suited for space applications. They can be grown and processed as two-junction devices with roughly twice the voltage and half the current of GaAs cells. They have low temperature coefficients, and have good potential for radiation hardness. We have previously reported the effects of electron irradiation on test cells which were not optimally designed for space. From those results we estimated that an optimally designed cell could achieve 20 percent after irradiation with 10(exp 15) cm(exp -2) 1 MeV electrons. Modeling studies predicted that slightly higher efficiencies may be achievable. Record efficiencies for EOL performance of other types of cells are significantly lower. Even the best Si and InP cells have BOL efficiencies lower than the EOL efficiency we report here. Good GaAs cells have an EOL efficiency of 16 percent. The InP/Ga(0.5)In(0.5)As two-junction, two-terminal device has a BOL efficiency as high as 22.2 percent, but radiation results for these cells were limited. In this study we use the previous modeling and irradiation results to design a set of Ga(0.5)In(0.5)P/GaAs cells that will demonstrate the importance of the design parameters and result in high-efficiency devices. We report record AMO efficiencies: a BOL efficiency of 25.7 percent for a device optimized for BOL performance and two of different designs with EOL efficiencies of 19.6 percent (at 10(exp 15) cm(exp -2) 1MeV electrons). We vary the bottom-cell base doping and the top-cell thickness to show the effects of these two important design parameters. We get an unexpected result indicating that the dopant added to the bottom-cell base also increases the degradation of the top cell.

Kurtz, Sarah R.↗
NASA NTRS1995

Molecular dynamics simulation of a piston driven shock wave in a hard sphere gas

Molecular dynamics simulation is used to study the piston driven shock wave at Mach 1.5, 3, and 10. A shock tube, whose shape is a circular cylinder, is filled with hard sphere molecules having a Maxwellian thermal velocity distribution and zero mean velocity. The piston moves and a shock wave is generated. All collisions are specular, including those between the molecules and the computational boundaries, so that the shock development is entirely causal, with no imposed statistics. The structure of the generated shock is examined in detail, and the wave speed; profiles of density, velocity, and temperature; and shock thickness are determined. The results are compared with published results of other methods, especially the direct simulation Monte-Carlo method. Property profiles are similar to those generated by direct simulation Monte-Carlo method. The shock wave thicknesses are smaller than the direct simulation Monte-Carlo results, but larger than those of the other methods. Simulation of a shock wave, which is one-dimensional, is a severe test of the molecular dynamics method, which is always three-dimensional. A major challenge of the thesis is to examine the capability of the molecular dynamics methods by choosing a difficult task.

Woo, Myeung-Jouh↗
NASA NTRS1994

Another clue about particle acceleration in impulsive hard X-ray/microwave bursts

In a sample of impulsive bursts with rise times less than 30 s, a correlation between burst rise times and the frequency of maximum microwave emission has been found. The immplications for source structure and dynamics are discussed. Previously evidence was found that such bursts are caused by some propagating disturbance such as a shock wave or thermal conduction front. Combining that evidence with the microwave and hard X-ray spectral information suggests that the most rapid bursts are emitted from the most compact and intensely magnetized sources. The most rapid bursts also exhibited the hardest X-ray spectra, as published previously. These facts are important clues to understanding the physical process responsible for impulsive bursts. A model for the bursts is suggested, based on the observations and inferences described.

Batchelor, David↗
NASA NTRS1993

A statistical analysis of hard X-Ray solar flares

In this study we perform a statistical study on, 8319 X-Ray solar flares observed with the Hard X-Ray Spectrometer (HXRBS) on the Solar Maximum Mission satellite (SMM). The events are examined in terms of the durations, maximum intensities, and intensity profiles. It is concluded that there is no evidence for a correlation between flare intensity, flare duration, and flare asymmetry. However, we do find evidence for a rapid fall-of in the number of short-duration events.

Pearce, G.↗
NASA NTRS1994

Delayed hard photons from gamma-ray bursts

The delayed hard (up to 25 GeV) photons observed more than an hour following a gamma-ray burst on 1994 February 17 may result from the collisions of relativistic nucleons with a dense cloud, producing pi(0). The required cloud density is approx. 2 x 10(exp 11)/cu cm. This cloud may be the remains of the disrupted envelope of a neutron star, and may survive as an excretion disk of approx. 10(exp 14) - 10 (exp 15) cm radius around the coalescing binary.

Katz, J. I.↗
NASA NTRS1995

Balloon-borne measurements of the SN 1987A hard X-ray continuum

SN 1987A hard X-ray continuum spectra obtained on 1987 October 29, 1988 April 9-10, and 1988 November 11 from balloon-flight measurments are presented. The spectra, spanning the energy range from 25 keV to 300 keV, have been analyzed using a detector response matrix inversion technique that converts the spectra form counts/s/sq cm keV to photons/s/sq cm keV allowing direct comparison with theoretical models. The results indicate that the bulk of the (56)Co is mixed moderately through the inner regions of the supernova envelope but they do not preclude the mixing of a small amount of the (56)Co farther out into the envelope necessary to account for the observed (56)Co line fluxes. The effect of the ratio (57)Co to (56)Co on the 1988 November 11 continuum spectrum is discussed.

Pendleton, Geoffrey N.↗
NASA NTRS1994

Development of a Hybrid Gas Detector/Phoswich for Hard X-Ray Astronomy

A hybrid detector is under development for use as a balloon-borne instrument in hard x-ray astronomy. The detector provides broad band coverage by coupling an optical avalanche chamber to a phoswich. The optical avalanche chamber yields superior instrument response at low energies while the scintillator takes over at the higher energies where the gas becomes transparent: at 25 keV, the addition of the gas chamber improves the energy resolution by a factor of 2.5 and the spatial resolution by a factor of 10 as compared to the stand-alone response of the phoswich. A half-scale prototype instrument is being constructed for test purposes and to help resolve a number of design questions involving the coupling of the two components.

Pimperl, M. M.↗
NASA NTRS1997

Internal Luminosity Distribution of Bright Gamma-Ray Bursts and its Relation to Duration and Spectral Hardness

We present first results from a comprehensive investigation into the distribution of luminosity within the 50 brightest cosmic gamma-ray bursts detected by the Burst and Transient Source Experiment (BATSE). The internal luminosity function psi(L) is defined such that the quantity psi(L)dL represents the fraction of total emission time during which the burst possesses a luminosity between L and L + dL. For these brightest bursts, the psi(L) functions are quasi-power-law-like and decrease in amplitude with increasing luminosity. Through investigation of both individual psi(L) distributions and data from the ensemble of bursts, we demonstrate a high probability for correlation between the shape of the internal luminosity function as measured by the average logarithmic slope and the burst duration as measured by the T(sub 90) parameter and, with lower significance, between the shape of psi(L) and the burst photon-fluence spectral index. We furthermore demonstrate a correlation between burst hardness ratio and duration in these brightest bursts which is opposite to that of the entire gamma-ray burst ensemble.

Horack, John M.↗
NASA NTRS1997

Hard X-ray imaging survey of the Galactic plane with the Caltech gamma-ray imaging payload GRIP-2

In a two-day balloon flight during October 1995, the Caltech coded aperture gamma ray imaging payload (GRIP-2) imaged various fields in the Galactic plane and center in the 25 to 600 keV energy band. The large phoswich detector, the 15 deg field of view, the 30 arcmin angular resolution and 6 arcmin point source localization capability of GRIP-2 provides the possibility of surveying the accreting binary population of the Galaxy at high energy. The instrument is described and preliminary imaging results are reported on. The capabilities of this instrument for hard X-ray/gamma ray imaging are demonstrated.

Corbel, S.↗
NASA NTRS1996

Low Temperature Unbalanced Magnetron Deposition of Hard, Wear-Resistant Coatings for Liquid-Film Bearing Applications

The original program for evaluating the tribological properties several different hard coatings for liquid film bearing applications was curtailed when the time for the program was reduced from 3 years to 1. Of the several different coatings originally planned for evaluation, we decided to concentrate on one coating, carbon nitride. At BIRL, we have been instrumental in the development of reactively sputtered carbon nitride coatings, and we have found that it is a very interesting new material with very good tribological properties. In this program, we found that the reactively sputtered carbon nitride does not bond well directly to hardened 440C stainless steel; but if an interlayer of titanium nitride is added between the carbon nitride and the 440C, the adhesion of the dual coating combination is very good. Statistically designed experiments were run with the dual layer combination, and 3 variables were chosen for the Box-Benken design, which were the titanium nitride interlayer thickness, the nitrogen partial pressure during the reactive sputtering of the carbon nitride, and the carbon nitride substrate bias voltage. Two responses were studied from these three variables; the adhesion of the dual coating combination to the 440C substrate and the friction coefficient of the carbon nitride in dry sliding contact with 52100 steel in air. The best adhesion came with the thickness interlayer thickness studied, which was 4 micrometers, and the lowest coefficient of friction was 0.1, which was achieved when the bias voltage was in the range of -80 to - 120 V and the nitrogen partial pressure was 3 mTorr.

Sproul, William D.↗
NASA NTRS1997

The Interrelation of Soft and Hard X-ray Emission During Solar Flares

The objective of this project is to determine the characteristics of flare energy transport processes through the study of soft X-rays, hard X-rays, and their interrelationships through analysis of Yohkoh SXT, HXT, and BCS data, and comparison with theoretical models. The personnel involved in the research include SSL Assistant Research Physicists Dr. Peng Li and Dr. James McTiernan.

Fisher, George H.↗
NASA NTRS1996

Energetics of impulsive solar flares: Correlating BATSE hard x-ray bursts and the solar atmosphere's soft x-ray response

This investigation has involved the correlation of BATSE-observed solar hard X-ray emission with the characteristics of soft X-ray emitting plasma observed by the Yohkoh Bragg Crystal Spectrometers. The goal was to test the hypothesis that localized electron beam heating is the dominant energy transport mechanism in impulsive flares, as formulated in the thick-target electron-heated model of Brown.

Newton, Elizabeth↗
NASA NTRS1997

Hard X-Ray Emission of X-Ray Bursters

The main results from this investigation were serendipitous. The long observation approved for the study of the hard X-ray emission of X-ray bursters lead, instead, to one of the largest early samples of the behavior of fast quasi-periodic oscillations (QPOS) in an atoll sources. Our analysis of this data set lead to the several important discoveries including the existence of a robust correlation between QPO frequency and the flux of a soft blackbody component of the X-ray spectrum in the atoll source 4U 0614+091.

Kaaret, Phillip↗
NASA NTRS1997

Rad-Hard/HI-REL FPGA

The goals for a radiation hardened (RAD-HARD) and high reliability (HI-REL) field programmable gate array (FPGA) are described. The first qualified manufacturer list (QML) radiation hardened RH1280 and RH1020 were developed. The total radiation dose and single event effects observed on the antifuse FPGA RH1280 are reported on. Tradeoffs and the limitations in the single event upset hardening are discussed.

Jih-Jong Wang↗
NASA NTRS1998

Long Term Hard X-ray Monitoring of X-ray Bursters

This grant supported our analysis of BATSE occultation data on x-ray bursters and neutron star low mass x-ray binaries (LMXBs) from the Compton Gamma-ray Observatory carried out under observing cycle 6. The work carried out under this grant was closely related to our separate investigation (NAG5-3808) to develop a prototype BATSE imaging survey for faint transients. In this Final Report, we summarize the Scientific Objectives of this investigation of hard x-ray studies of bursters and the Results Achieved; and finally the Papers Published.

Grindlay, Jonathan E.↗
NASA NTRS1997

Graded Multilayers not Required for Hard-X-Ray Imaging

For a given x-ray optic, a graded-multilayer coating extends the energy response to higher energies. However, this does not imply that graded multilayers are required for efficient hard-x-ray focusing. Indeed, smaller x-ray optics using conventional coatings provide advantages - namely, greater effective area per unit mass, less diffractive scattering by surface micro-roughness, and demonstrated feasibility - over larger optics coated with multilayers.

Weisskopf, M. C.↗
NASA NTRS1998

Hard X-Ray and Wide Focusing Telescopes

Studies are being carried out to compare the performance of several different separation materials used in the replication process. This report presents the results obtained during the second year of a program which consists of replicating smooth, thin substrates, depositing multilayer coatings upon them, and evaluating their performance. Replication and multilayer coatings are both critically important to the development of focussing hard X-ray telescopes that function up to 100 keV. The activities of the current year include extending the comparison between sputtered amorphous carbon and evaporated gold to include sputtered as well as evaporated gold. The figure of merit being the smoothness of the replica which has a direct effect on the specular reflectivity. These results were obtained with epoxy replication, but they should be applicable to electroformed nickel, the process we expect to use for the ultimate replicated optics.

Gorenstein, Paul↗
NASA NTRS1998

Soft X-Ray Spectra of AGN Discovered Via Their Hard X-Ray

This final report is a study of the Active Galactic Nuclei (AGN). Investigation of the soft x-ray spectra of AGN were performed by using their hard x-ray emission. ROSAT observations of AGN was also performed, which allowed for the study of these x-ray spectra and the structures of 7 clusters of galaxies.

Schwartz, Daniel↗