Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distributed simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Reduction of on-resistance and current crowding in quasi-vertical GaN power diodes

This paper studies the key parameters affecting on-resistance and current crowding in quasi-vertical GaN power devices by experiment and simulation. The current distribution in the drift region, n−-GaN, was found to be mainly determined by the sheet resistance of the current spreading layer, n+-GaN. The actual on-resistance of the drift region significantly depends on this current distribution rather than the intrinsic resistivity of the drift layer. As a result, the total specific on-resistance of quasi-vertical diodes shows a strong correlation with the device area and sheet resistance of the current spreading layer. By reducing the sheet resistance of the current spreading layer, the specific on-resistance of quasi-vertical GaN-on-Si power diodes has been reduced from ∼10 mΩ·cm2 to below 1 mΩ·cm2. Design space of the specific on-resistance at different breakdown voltage levels has also been revealed in optimized quasi-vertical GaN power diodes.

Zhang, Yuhao (ORCID:0000000228495653)↗

Atomistic study of silicon alloying in the spallation behavior of nanocrystalline aluminum systems

Here, the effect of concentration of the alloying element silicon (Si) on the shock and spall response of aluminum (Al) is studied using classical molecular dynamics (MD) simulations. Silicon is distributed as individual grains and as grain boundaries and the dynamic response under shock is studied for an impact velocity of 1000 m/s. A general trend observed here is that the spallation is almost exclusively intergranular and limited to Al-Si interfaces. The spall strengths are observed to a) decrease with an increase in alloying of Si as grains and b) show little increase for up to 50% grain boundary segregation. An increase in grain size of the whole system showed negligible differences in spall strength, highlighting the significance of concentration of the alloying species rather than its grain size. These results provide an atomistic understanding of light-weight metallic systems under shock compression and pave the way for designing multiphase metal matrix alloys and composites for defense/armor applications.

36 MATERIALS SCIENCE↗

Characteristic point algorithm in laser ektacytometry of red blood cells

We consider the problem of measuring red blood cell deformability by laser diffractometry in shear flow (ektacytometry). A new equation is derived that relates the parameters of the diffraction pattern to the width of the erythrocyte deformability distribution. The numerical simulation method shows that this equation provides a higher accuracy of measurements in comparison with the analogous equation obtained by us earlier. (laser biophotonics)

62 RADIOLOGY AND NUCLEAR MEDICINE↗

MICROLENSING-BASED ESTIMATE OF THE MASS FRACTION IN COMPACT OBJECTS IN LENS GALAXIES

We estimate the fraction of mass that is composed of compact objects in gravitational lens galaxies. This study is based on microlensing measurements (obtained from the literature) of a sample of 29 quasar image pairs seen through 20 lens galaxies. We determine the baseline for no microlensing magnification between two images from the ratios of emission line fluxes. Relative to this baseline, the ratio between the continua of the two images gives the difference in microlensing magnification. The histogram of observed microlensing events peaks close to no magnification and is concentrated below 0.6 mag, although two events of high magnification, DELTAm approx 1.5, are also present. We study the likelihood of the microlensing measurements using frequency distributions obtained from simulated microlensing magnification maps for different values of the fraction of mass in compact objects, alpha. The concentration of microlensing measurements close to DELTAm approx 0 can be explained only by simulations corresponding to very low values of alpha (10% or less). A maximum likelihood test yields alpha = 0.05{sup +0.09}{sub -0.03} (90% confidence interval) for a quasar continuum source of intrinsic size r{sub s{sub 0}}approx2.6x10{sup 15} cm. This estimate is valid in the 0.1-10 M {sub sun} range of microlens masses. We study the dependence of the estimate of alpha with r{sub s{sub 0}}, and find that alpha approx< 0.1 for r{sub s{sub 0}}approx<1.3x10{sup 16} cm. High values of alpha are possible only for source sizes much larger than commonly expected (r{sub s{sub 0}}>>2.6x10{sup 16} cm). Regarding the current controversy about Milky Way/LMC and M31 microlensing studies, our work supports the hypothesis of a very low content in MACHOS (Massive Compact Halo Objects). In fact, according to our study, quasar microlensing probably arises from the normal star populations of lens galaxies and there is no statistical evidence for MACHOS in the dark halos.

79 ASTRONOMY AND ASTROPHYSICS↗

TIME-DEPENDENT RADIATION TRANSFER IN THE INTERNAL SHOCK MODEL SCENARIO FOR BLAZAR JETS

We describe the time-dependent radiation transfer in blazar jets within the internal shock model. We assume that the central engine, which consists of a black hole and an accretion disk, spews out relativistic shells of plasma with different velocities, masses, and energies. We consider a single inelastic collision between a faster (inner) and a slower (outer) moving shell. We study the dynamics of the collision and evaluate the subsequent emission of radiation via the synchrotron and synchrotron self-Compton processes after the interaction between the two shells has begun. The collision results in the formation of a forward shock and a reverse shock that convert the ordered bulk kinetic energy of the shells into magnetic field energy and accelerate the particles, which then radiate. We assume a cylindrical geometry for the emission region of the jet. We treat the self-consistent radiative transfer by taking into account the inhomogeneity in the photon density throughout the region. In this paper, we focus on understanding the effects of varying relevant input parameters on the simulated spectral energy distribution and spectral variability patterns.

79 ASTRONOMY AND ASTROPHYSICS↗

DETECTION OF NONPOLAR IONS IN {sup 2}{Pi}{sub 3/2} STATES BY RADIOASTRONOMY VIA MAGNETIC DIPOLE TRANSITIONS

The possibility of magnetic dipole-induced pure rotational transitions in the interstellar medium is investi- gated for symmetric Hund's case (a) linear molecules, such as H-C{identical_to}C-H{sup +} (X-tilde {sup 2}{Pi}{sub 3/2u}), CO{sub 2} {sup +} (X-tilde {sup 2}{Pi}{sub 3/2g}), H-C{identical_to}C-C{identical_to}C-H{sup +} (X-tilde {sup 2}{Pi}{sub 3/2g}), and N{sub 3} (X-tilde {sup 2}{Pi}{sub 3/2g}). These species lack an electric dipole moment and therefore cannot undergo pure rotational electric dipole transitions. These species can undergo pure rotational transitions via the parallel component of the magnetic dipole operator, however. The transition moments and Einstein A coefficients for the allowed pure rotational transitions are derived for a general Hund's case (a) linear molecule, and tabulated for the examples of H-C{identical_to}C-H{sup +} ({sup 2}{Pi}{sub 3/2u}) and H-C{identical_to}C-C{identical_to}C-H{sup +} ({sup 2}{Pi}{sub 3/2g}). It is found that the rates of emission are comparable to collision rates in interstellar clouds, suggesting that this decay mechanism may be important in simulating rotational population distributions in diffuse clouds and for detecting these molecules by radioastronomy. Expected line positions for the magnetic dipole-allowed R{sub ef} (J) and R{sub fe} (J) transitions of H-C{identical_to}C-H{sup +} ({sup 2}{Pi}{sub 3/2u}), H-C{identical_to}C-C{identical_to}C-H{sup +} ({sup 2}{Pi}{sub 3/2g}), CO{sub 2}{sup +} ({sup 2}{Pi}{sub 3/2g}), and N{sub 3} ({sup 2}{Pi}{sub 3/2g}) are tabulated to assist in their observation by radioastronomy or in the laboratory.

74 ATOMIC AND MOLECULAR PHYSICS↗

ACCURATE SIMULATIONS OF BINARY BLACK HOLE MERGERS IN FORCE-FREE ELECTRODYNAMICS

We provide additional information on our recent study of the electromagnetic emission produced during the inspiral and merger of supermassive black holes when these are immersed in a force-free plasma threaded by a uniform magnetic field. As anticipated in a recent letter, our results show that although a dual-jet structure is present, the associated luminosity is {approx}100 times smaller than the total one, which is predominantly quadrupolar. Here we discuss the details of our implementation of the equations in which the force-free condition is not implemented at a discrete level, but rather obtained via a damping scheme which drives the solution to satisfy the correct condition. We show that this is important for a correct and accurate description of the current sheets that can develop in the course of the simulation. We also study in greater detail the three-dimensional charge distribution produced as a consequence of the inspiral and show that during the inspiral it possesses a complex but ordered structure which traces the motion of the two black holes. Finally, we provide quantitative estimates of the scaling of the electromagnetic emission with frequency, with the diffused part having a dependence that is the same as the gravitational-wave one and that scales as L{sup non-coll}{sub EM} Almost-Equal-To {Omega}{sup 10/3-8/3}, while the collimated one scales as L{sup coll}{sub EM} Almost-Equal-To {Omega}{sup 5/3-6/3}, thus with a steeper dependence than previously estimated. We discuss the impact of these results on the potential detectability of dual jets from supermassive black holes and the steps necessary for more accurate estimates.

79 ASTRONOMY AND ASTROPHYSICS↗

Detection prospects for high energy neutrino sources from the anisotropic matter distribution in the local Universe

Constraints on the number and luminosity of the sources of the cosmic neutrinos detected by IceCube have been set by targeted searches for point sources. We set complementary constraints by using the 2MASS Redshift Survey (2MRS) catalogue, which maps the matter distribution of the local Universe. Assuming that the distribution of the neutrino sources follows that of matter, we look for correlations between ''warm'' spots on the IceCube skymap and the 2MRS matter distribution. Through Monte Carlo simulations of the expected number of neutrino multiplets and careful modelling of the detector performance (including that of IceCube-Gen2), we demonstrate that sources with local density exceeding 10{sup −6} Mpc{sup −3} and neutrino luminosity L {sub ν} ∼< 10{sup 42} erg s{sup −1} (10{sup 41} erg s{sup −1}) will be efficiently revealed by our method using IceCube (IceCube-Gen2). At low luminosities such as will be probed by IceCube-Gen2, the sensitivity of this analysis is superior to requiring statistically significant direct observation of a point source.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High-pressure phase transitions and melt structure of Pb O 2 : An analog for silica

In situ x-ray diffraction measurements and inverse Monte Carlo simulations of pair distribution functions were used to study the structural response of PbO 2 under pressure and to characterize the local structure of liquid PbO 2 . Two phase transitions are observed upon room-temperature compression of crystalline PbO 2 up to ~65 GPa. Here, the starting mixture of rutile structured β– PbO 2 and orthorhombic α– PbO 2 undergoes a transition to a ZrO 2 -type orthorhombic phase with space group Pbca at ~21 GPa. Above 42 GPa, the Pbca phase transforms to a cotunnite-type phase with space group Pnam. In this paper, we also report short-range order in liquid PbO 2 , showing ~8–9-fold and 4–5-fold coordination around Pb and O atoms, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shipper/receiver difference verification of spent fuel by use of PDET

Spent fuel storage pools in most countries are rapidly approaching their design limits with the discharge of over 10,000 metric tons of heavy metal from global reactors. Countries like UK, France or Japan have adopted a closed fuel cycle by reprocessing spent fuel and recycling MOX fuel while many other countries opted for above ground interim dry storage for their spent fuel management strategy. Some countries like Finland and Sweden are already well on the way to setting up a conditioning plant and a deep geological repository for spent fuel. For all these situations, shipments of spent fuel are needed and the number of these shipments is expected to increase significantly. Although shipper/receiver difference (SRD) verification measurements are needed by IAEA when the recipient facility receives spent fuel, these are not being practiced to the level that IAEA has desired due to lack of a credible measurement methodology and instrument that can reliably perform these measurements to verify non-diversion of spent fuel during shipment and confirm facility operator declarations on the spent fuel. In this paper, we describe a new safeguards method and an associated instrument, Partial Defect Tester (PDET), which can detect pin diversion from Pressurized Water Reactor (PWR) Spent Fuel Assemblies in an in-situ condition. The PDET uses multiple tiny neutron and gamma detectors in the form of a cluster and a simple, yet highly precise, gravity-driven system to obtain underwater radiation measurements inside a Pressurized Water Reactor (PWR) spent fuel assembly. The method takes advantage of the PWR fuel design which contains multiple guide tubes which can be accessed from the top. The data obtained in such a manner can provide spatial distribution of neutron and gamma flux within a spent fuel assembly. Our simulation study as well as validation measurements indicated that the ratio of the gamma signal to the thermal neutron signal at each detector location normalized to the peak ratio of all the detector locations gives a unique signature that is sensitive to missing pins. The signature is principally dependent on the geometry of the detector locations, and little sensitive to enrichment or burn-up variations. A small variation in the fuel bundle, such as a few missing pins, changes the shape of the signature to enable detection. After verification of the non-diversion of spent fuel pins, the neutron signal and gamma signal are subsequently used to verify the consistency of the operator declaration on the fuel burn-up and cooling time. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A VSM-Based DER Dispatch MINLP for Volt-VAR Control in Unbalanced Power Distribution Systems

This paper presents an optimal dispatch algorithm to coordinate customer-owned controllable loads and smart solar inverters with utility-owned voltage regulators and capacitors to meet voltage control objectives. The optimization problem is formulated as a mixed-integer nonlinear programming (MINLP) problem. A voltage sensitivity matrix (VSM) is used to linearize the effect of control actions on the voltage at customer nodes when solving the MINLP. The VSM is recalculated at each time step to improve the computational accuracy. Both discrete switching actions of the capacitor and VRs and the continuous adjustment of real and reactive power from load and smart inverters are considered in the MINLP volt-var problem formulation. The objective function minimizes the cost of all control actions and the magnitude of voltage fluctuations from the previous time period. Constraints ensure that the voltage at each node is maintained within ANSI limits and the feeder power factor is controlled within the desired range. The algorithm is tested using an actual 3-phase unbalanced distribution feeder model. Simulation results demonstrate that the proposed algorithm is computationally feasible on real circuits and improves voltage control while minimizing operational costs.

McEntee, Catie↗

Measurement of the top-quark mass in $\mathrm{t}\overline{\mathrm{t}}$ events with dilepton final states in pp collisions at $\sqrt{s}=7\ \mbox{TeV}$

The top-quark mass is measured in proton-proton collisions at sqrt(s) = 7 TeV using a data sample corresponding to an integrated luminosity of 5.0 inverse femtobarns collected by the CMS experiment at the LHC. The measurement is performed in the dilepton decay channel t t-bar to ell+ nu[ell] b, ell- anti-nu[ell] b-bar, where ell=e,mu. Candidate top-quark decays are selected by requiring two leptons, at least two jets, and imbalance in transverse momentum. The mass is reconstructed with an analytical matrix weighting technique using distributions derived from simulated samples. Using a maximum-likelihood fit, the top-quark mass is determined to be 172.5 +/- 0.4 (stat) +/- 1.5 (syst) GeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SimulatorToFMU v0.1

SimulatorToFMU is a software package written in Python which allows users to export a memoryless Python-driven simulation program or script as a Functional Mock-up Unit (FMU) for model exchange or co-simulation.In CyDER (Cyber Physical Co-simulation Platform for Distributed Energy Resources in Smart Grids), SimulatorToFMU will allow exporting OPAL-RT as an FMU. This will enable OPAL-RT to be linked to CYMDIST and GridDyn FMUs through a standardized open source interface.

Nouidui, Thierry↗

SAGESim

SAGESim: Scalable Agent-based GPU-Enabled Simulator is a distributed GPU agent-based modeling framework in Python. SAGESim enables researchers to study complex adaptive systems at large scales on high-performance computing systems

Gunaratne, Chathika↗

Machine-learning-aided cognitive reconfiguration for flexible-bandwidth HPC and data center networks [Invited]

This paper proposes a machine-learning (ML)-aided cognitive approach for effective bandwidth reconfiguration in optically interconnected datacenter/high-performance computing (HPC) systems. The proposed approach relies on a Hyper-X-like architecture augmented with flexible-bandwidth photonic interconnections at large scales using a hierarchical intra/inter-POD photonic switching layout. We first formulate the problem of the connectivity graph and routing scheme optimization as a mixed-integer linear programming model. A two-phase heuristic algorithm and a joint optimization approach are devised to solve the problem with low time complexity. Then, we propose an ML-based end-to-end performance estimator design to assist the network control plane with intelligent decision making for bandwidth reconfiguration. Numerical simulations using traffic distribution profiles extracted from HPC applications traces as well as random traffic matrices verify the accuracy performance of the ML design estimator ( < <#comment/> 9 % <#comment/> error) and demonstrate up to 5 × <#comment/> throughput gain from the proposed approach compared with the baseline Hyper-X network using fixed all-to-all intra/inter-portable data center interconnects.

Chen, Xiaoliang (ORCID:0000000278056237)↗

WHOLESCALE: Coordinates of wells at San Emidio, Nevada

This dataset includes position coordinates and elevation information for wells at the WHOLESCALE San Emidio project location. Well positions in the attached file are characterized by UTM coordinates (Easting, Northing) in meters, and WHOLESCALE coordinates (Easting, Northing) relative in meters from a chosen reference point. The elevation of the top and bottom of open intervals within each well (representing locations of perforated or open-hole sections) are measured in meters (positive) above WGS84 geoid (mean sea level). The WHOLESCALE acronym stands for Water & Hole Observations Leverage Effective Stress Calculations and Lessen Expenses. The goal of the WHOLESCALE project is to simulate the spatial distribution and temporal evolution of stress in the geothermal system at San Emidio in Nevada, United States.

15 GEOTHERMAL ENERGY↗