Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “directivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Study of Lagrangian characteristic times using direct numerical simulation of turbulence

Direct numerical simulations and large eddy simulations of homogeneous isotropic turbulence are used to compute Lagrangian statistics of turbulence and, in particular, its time scales. The computed time scales are compared with the spectral times scales that are frequently used in Eddy Damped Quasi-Normal Markovian calculations of the spectrum. The time scale models are rather good at high wavenumber and the results point to directions for improvement of the time scales at low wavenumber.

Lee, C. H.↗
NASA NTRS1987

Direct simulation of a turbulent oscillating boundary layer

The turbulent boundary layer driven by a freestream velocity that varies sinusoidally in time around a zero mean is considered. The flow has a rich behavior including strong pressure gradients, inflection points, and reversal. A theory for the velocity and stress profiles at high Reynolds number is formulated. Well-resolved direct Navier-Stokes simulations are conducted over a narrow range of Reynolds numbers, and the results are compared with the theoretical predictions. The flow is also computed over a wide range of Reynolds numbers using a new algebraic turbulence model; the results are compared with the direct simulations and the theory.

Spalart, Philippe R.↗
NASA NTRS1988

Microstructure-property relationships in directionally solidified single-crystal nickel-base superalloys

This paper discusses some of the microstructural features which influence the creep properties of directionally solidified and single-crystal nickel-base superalloys. Gamma prime precipitate size and morphology, gamma-gamma (prime) lattice mismatch, phase instability, alloy composition, and processing variations are among the factors considered. Recent experimental results are reviewed and related to the operative deformation mechanisms and to the corresponding mechanical properties. Special emphasis is placed on the creep behavior of single-crystal superalloys at high temperatures, where directional gamma (prime) coarsening is prominent, and at lower temperatures, where gamma (prime) coarsening rates are significantly reduced. It can be seen that very subtle changes in microstructural features can have profound effects on the subsequent properties of these materials.

Mackay, Rebecca A.↗
NASA NTRS1988

Solutal convection during directional solidification

During directional solidification of a binary alloy at constant velocity, buoyancy-driven fluid flow may occur due to the solute gradients generated by the solidification process. Numerical calculations of the solute and fluid flow fields in the melt have been carried out using finite differences in a two-dimensional, time-dependent model that assumes a planar crystal-melt interface and allows time-dependent gravitational accelerations. The container walls are rigid and perfectly insulating for solute. For constant vertical gravitational accelerations, as the solutal Rayleigh number is varied, multiple steady states and time-dependent states may occur. The bifurcation from the quiescent state may be subcritical or transcritical, depending on the aspect ratio of the container. Calculations have also been performed for a gravitational acceleration that is assumed to be uniform in magnitude with its direction rotating uniformly. Numerical results have been obtained for a Schmidt number of 10 and a gravitational acceleration of 0.0001 G. The maximum variation in the solute concentration at the crystal-melt interface is calculated for various values of the rotation rate of the gravitational acceleration.

Mcfadden, G. B.↗
NASA NTRS1989

Position-And-Direction Sensor For Light Beams

Optoelectronic sensor measures both position and direction of incidence of laser beam or other narrow beam of light. New sensor part of robotic welding system in which laser beam reflected from pool of molten metal and monitored by lateral-position sensor. To provide unambiguous measurement of both lateral position and direction of incident beam, sensor includes two position-sensitive photodetectors or linear arrays of photodetectors.

Smith, Matthew A.↗
NASA NTRS1989

Miniature Flow-Direction/Pitot-Static Pressure Probes

Precision flow-direction/pitot-static pressure probes, ranging from 0.035 to 0.090 inch (0.89 to 2.29 mm) in outside diameter, successfully fabricated and calibrated for use in Langley 20-inch Mach 6 Tunnel. Probes simultaneously measure flow direction and static and pitot pressures in flow fields about configurations in hypersonic flow at temperatures up to 500 degree F (260 degree C).

Ashby, George C., Jr.↗
NASA NTRS1989

Better PFAE's From Direct Fluorination

New low-molecular-weight perfluoroalkylethers (PFAE's) synthesized by direct fluorination in experimental study. Correlated viscosity and oxidation characteristics of PFAE's with structures to evaluate suitability as high-temperature lubricants and hydraulic fluids. Direct fluorination process attractive because it often involves single-step reaction and uses cheap starting materials. Versatile: produces highly branched ethers as well as polyethers containing more than two sequential carbon atoms in polymer chains. Such molecules cannot be made by conventional techniques.

Jones, W. R., Jr.↗
NASA NTRS1986

Constitutive modelling of single crystal and directionally solidified superalloys

The trend towards improved engine efficiency and durability places increasing demands on materials that operate in the hot section of the gas turbine engine. These demands are being met by new coatings and materials such as single crystal and directionally solidified nickel-base superalloys which have greater creep/fatigue resistance at elevated temperatures and reduced susceptibility to grain boundary creep, corrosion and oxidation than conventionally cast alloys. Work carried out as part of a research program aimed at the development of constitutive equations to describe the elevated temperature stress-strain-time behavior of single crystal and directionally solidified turbine blade superalloys is discussed. The program involves both development of suitable constitutive models and their verification through elevated temperature tension-torsion testing of single crystals of PWA 1480.

Jordan, E. H.↗
NASA NTRS1988

Measurements and calculations of the Coulomb cross section for the production of direct electron pairs by energetic heavy nuclei in nuclear track emulsion

Measurements and theoretical predictions of the Coulomb cross section for the production of direct electron pairs by heavy ions in emulsion have been performed. Nuclear track emulsions were exposed to the 1.8 GeV/amu Fe-56 beam at the Lawrence Berkeley Laboratory bevalac and to the 60 and 200 GeV/amu O-16 and the 200 GeV/amu S-32 beam at the European Center for Nuclear Research Super Proton Synchrotron modified to accelerate heavy ions. The calculations combine the Weizsacker-Williams virtual quanta method applicable to the low-energy transfers and the Kelner-Kotov relativistic treatment for the high-energy transfers. Comparison of the measured total electron pair yield, the energy transfer distribution, and the emission angle distribution with theoretical predictions revealed a discrepancy in the frequency of occurrence of the low-energy pairs (less than or = 10 MeV). The microscope scanning criteria used to identify the direct electron pairs is described and efforts to improve the calculation of the cross section for pair production are also discussed.

Derrickson, J. H.↗
NASA NTRS1988

Computer simulation of macrosegregation in directionally solidified circular ingots

The formulation and employment of a computer code designed to simulate the directional solidification of lead-rich Pb-Sn alloys in the form of an ingot with a uniform and circular cross-section are described. The formulation is for steady-state solidification in which convection in the all-liquid zone is ignored. Particular attention was given to designing a code to simulate the effect of a subtle variation of temperature in the radial direction. This is important because a very small temperature difference between the center and the surface of the ingot (e.g., less than 0.5 C ) is enough to cause substantial convection within the mushy-zone when the solidification rate is approximately 0.001 to 0.0001 cm/s.

Yeum, K. S.↗
NASA NTRS1989

Active vibration control for flexible rotor by optimal direct-output feedback control

Experimental research tests were performed to actively control the rotor vibrations of a flexible rotor mounted on flexible bearing supports. The active control method used in the tests is called optimal direct-output feedback control. This method uses four electrodynamic actuators to apply control forces directly to the bearing housings in order to achieve effective vibration control of the rotor. The force actuators are controlled by an analog controller that accepts rotor displacement as input. The controller is programmed with experimentally determined feedback coefficients; the output is a control signal to the force actuators. The tests showed that this active control method reduced the rotor resonance peaks due to unbalance from approximately 250 micrometers down to approximately 25 micrometers (essentially runout level). The tests were conducted over a speed range from 0 to 10,000 rpm; the rotor system had nine critical speeds within this speed range. The method was effective in significantly reducing the rotor vibration for all of the vibration modes and critical speeds.

Nonami, Kenzou↗
NASA NTRS1989

Discussion of the potential and limitations of direct and large-eddy simulations

The full text of the discussion paper presented at the Whither Turbulence Workshop on the potential and limitations of direct and large-eddy simulations is provided. Particular emphasis is placed on discussing the role of numerics and mathematical theory in direct simulations of both compressible and incompressible flows. A variety of unresolved issues with large-eddy simulations such as their implementation in high-order finite difference codes, problems with defiltering, and modifications to accommodate integrations to solid boundaries are elaborated on. These as well as other points are discussed in detail along with the authors' views concerning the prospects for future research.

Hussaini, M. Y.↗
NASA NTRS1988

Bistable direction switching in an off-axis pumped continuous wave ruby laser

A report is presented of the observation of hysteretic bistable direction switching in a single-mode CW ruby laser system. This effect is only observed when the pump beam which is focused into the ruby rod is misaligned with respect to the rod end faces. At low pump powers, the ruby lases in a mode nearly collinear with the pump axis. At a higher pump power the ruby switches to a mode that is collinear with the rod end faces and preserves the original polarization. The effect is large enough to switch the beam by an angle equal to twice the diffraction angle. The observations show that under steady-state pumping, a CW ruby laser can exhibit bistable operation in its output direction and power. A calculation using the heat equation with two concentric cylinders with one as a heat source (pump laser) and the outer wall of the other held at 77 K, gives an increase in core temperature of about 0.01 K. Therefore, the increase in temperature is not large enough to change the index of refraction to account for such large macroscopic effects.

Afzal, R. Sohrab↗
NASA NTRS1988

The influence of interfacial energies and gravitational levels on the directionally solidified structures in hypermonotectic alloys

Various Cu-Pb-Al alloys were directionally solidified under 1-g conditions and alternating high-g/low-g conditions (achieved using NSAS's KC-135 aircraft) as a means of studying the influence of interfacial energies and gravitational levels on the resulting microstructures. Directional solidification of low Al content alloys was found to result in samples with coarser more irregular microstructures than in alloys with high Al contents under all the gravity conditions considered. Structures are correlated with interfacial energies, growth rates, and gravitational levels.

Andrews, J. B.↗
NASA NTRS1988

Directional solidification of lead-copper immiscible alloys in a cyclic gravity environment

Hypermonotectic copper-lead alloys were directionally solidified at unit gravity on earth and also in the cyclic gravitational environment attainable during flight of NASA's KC-135 aircraft. In both cases macrosegregation developed that consisted of an initial lead-rich phase above which an aligned composite structure of apparent monotectic composition grew. Differences within these regions are examined, and the suitability of the KC-135 environment for directional solidification of monotectic alloys is discussed.

Shah, S.↗
NASA NTRS1988

Tip-path-plane angle effects on rotor blade-vortex interaction noise levels and directivity

Acoustic data of a scale model BO-105 main rotor acquired in a large aeroacoustic wind tunnel are presented to investigate the parametric effects of rotor operating conditions on blade-vortex interaction (BVI) impulsive noise. Contours of a BVI noise metric are employed to quantify the effects of rotor advance ratio and tip-path-plane angle on BVI noise directivity and amplitude. Acoustic time history data are presented to illustrate the variations in impulsive characteristics. The directionality, noise levels and impulsive content of both advancing and retreating side BVI are shown to vary significantly with tip-path-plane angle and advance ratio over the range of low and moderate flight speeds considered.

Burley, Casey L.↗
NASA NTRS1987

Low cost, microcomputer-based interactive analysis system for direct-reception and archived remote sensing data

A hardware/software system has been developed for use in meteorological field experiments and by developing countries which need low-cost remote sensing data analysis capabilities. The system can directly receive satellite transmissions of the AVHRR, TOVS, Argos, GOES, GMS, and Meteosat systems. Also, the system can process computer tapes from Landsat. Received data are ingested directly into the computer's disk storage, eliminating the need for a wide-band analog tape drive. Data may be interpreted in terms of cloud imagery, cloudtop temperature, sea surface temperature, vegetation index, and temperature/humidity profiles with overlays of geographic boundaries and latitude/longitude grids. The image processing, enhancement functions, and modeling capabilities of the system are discussed.

Vermillion, Charles H.↗