Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “current status”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Non-Targeted Effects of Ionizing Radiation: Implications for Risk Assessment and the Radiation Dose Response Profile

Radiation risks at low doses remain a hotly debated topic. Recent experimental advances in our understanding of effects occurring in the progeny of irradiated cells, and/or the non-irradiated neighbors of irradiated cells, i.e., non-targeted effects associated with exposure to ionizing radiation, have influenced this debate. The goal of this document is to summarize the current status of this debate and speculate on the potential impact of non-targeted effects on radiation risk assessment and the radiation dose response profile.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Reactor-Based Management of Used Nuclear Fuel: Assessment of Major Options

This paper discusses the current status of the ongoing Advanced Fuel Cycle Initiative (AFCI) program in the U.S. Department of Energy that is investigating the potential for using the processing and recycling of used nuclear fuel to improve radioactive waste management, including used fuel. A key element of the strategies is to use nuclear reactors for further irradiation of recovered chemical elements to transmute certain long-lived highly-radioactive isotopes into less hazardous isotopes. Both thermal and fast neutron spectrum reactors are being studied as part of integrated nuclear energy systems where separations, transmutation, and disposal are considered. Radiotoxicity is being used as one of the metrics for estimating the hazard of used fuel and the processing of wastes resulting from separations and recycle-fuel fabrication. Decay heat from the used fuel and/or wastes destined for disposal is used as a metric for use of a geologic repository. Results to date indicate that the most promising options appear to be those using fast reactors in a repeated recycle mode to limit buildup of higher actinides, since the transuranic elements are a key contributor to the radiotoxicity and decay heat. Using such an approach, there could be much lower environmental impact from the high-level waste as compared to direct disposal of the used fuel, but there would likely be greater generation of low-level wastes that will also require disposal. An additional potential waste management benefit is having the ability to tailor waste forms and contents to one or more targeted disposal environments (i.e., to be able to put waste in environments best-suited for the waste contents and forms).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The local wavenumber model for computation of turbulent mixing

We present an overview of the current status in the development of a two-point spectral closure model for turbulent flows, known as the local wavenumber (LWN) model. The model is envisioned as a practical option for applications requiring multi-physics simulations in which statistical hydrodynamics quantities such as Reynolds stresses, turbulent kinetic energy, and measures of mixing such as density-correlations and mix-width evolution, need to be captured with relatively high fidelity. In this review, we present the capabilities of the LWN model since it was first formulated in the early 1990s, for computations of increasing levels of complexity ranging from homogeneous isotropic turbulence, inhomogeneous and anisotropic single-fluid turbulence, to two-species mixing driven by buoyancy forces. The review concludes with a discussion of some of the more theoretical considerations that remain in the development of this model.

42 ENGINEERING↗

Perspectives on beam-shaping optimization for thermal-noise reduction in advanced gravitational-wave interferometric detectors: Bounds, profiles, and critical parameters

Suitable shaping (in particular, flattening and broadening) of the laser beam has recently been proposed as an effective device to reduce internal (mirror) thermal noise in advanced gravitational-wave interferometric detectors. Based on some recently published analytic approximations (valid in the infinite-test-mass limit) for the Brownian and thermoelastic mirror noises in the presence of arbitrary-shaped beams, this paper addresses certain preliminary issues related to the optimal beam-shaping problem. In particular, with specific reference to the Laser Interferometer Gravitational-wave Observatory (LIGO) experiment, absolute and realistic lower bounds for the various thermal-noise constituents are obtained and compared with the current status (Gaussian beams) and trends (mesa beams), indicating fairly ample margins for further reduction. In this framework, the effective dimension of the related optimization problem, and its relationship to the critical design parameters are identified, physical-feasibility and model-consistency issues are considered, and possible additional requirements and/or prior information exploitable to drive the subsequent optimization process are highlighted.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Top-quark loops and the muon anomalous magnetic moment

The current status of electroweak radiative corrections to the muon anomalous magnetic moment is discussed. Asymptotic expansions for some important electroweak two-loop top quark triangle diagrams are illustrated and extended to higher order. Results are compared with the more general integral representation solution for generic fermion triangle loops coupled to pseudoscalar and scalar bosons of arbitrary mass. Furthermore, excellent agreement is found for a broader than expected range of mass parameters.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Revealing the Physics of r Modes in Low-Mass X-Ray Binaries

We consider the astrophysical constraints on the gravitational-wave-driven r-mode instability in accreting neutron stars in low-mass x-ray binaries. We use recent results on superfluid and superconducting properties to infer the core temperature in these neutron stars and show the diversity of the observed population. Simple theoretical models indicate that many of these systems reside inside the r-mode instability region. However, this is in clear disagreement with expectations, especially for the systems containing the most rapidly rotating neutron stars. The inconsistency highlights the need to reevaluate our understanding of the many areas of physics relevant to the r-mode instability. We summarize the current status of our understanding, and we discuss directions for future research which could resolve this dilemma.

79 ASTRONOMY AND ASTROPHYSICS↗

Toroidal magnetized iron neutrino detector for a neutrino factory

A neutrino factory has unparalleled physics reach for the discovery and measurement of CP violation in the neutrino sector. A far detector for a neutrino factory must have good charge identification with excellent background rejection and a large mass. An elegant solution is to construct a magnetized iron neutrino detector (MIND) along the lines of MINOS, where iron plates provide a toroidal magnetic field and scintillator planes provide 3D space points. In this report, the current status of a simulation of a toroidal MIND for a neutrino factory is discussed in light of the recent measurements of large $\theta_{13}$. The response and performance using the 10 GeV neutrino factory configuration are presented. It is shown that this setup has equivalent $\delta_{CP}$ reach to a MIND with a dipole field and is sensitive to the discovery of CP violation over 85% of the values of $\delta_{CP}$.

43 PARTICLE ACCELERATORS↗

Hadron properties in the nuclear medium

The QCD vacuum shows the dynamical breaking of chiral symmetry. In the hot and/or dense QCD medium, the chiral order parameter such as is expected to change as a function of temperature T and density {rho} of the medium, and its experimental detection is one of the main challenges in modern hadron physics. In this paper, the theoretical expectations for the in-medium hadron spectra associated with partial restoration of chiral symmetry are discussed as well as the current status of experiments with an emphasis on the measurements of properties of mesons produced in near-ground-state nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Early time solution as an alternative to the late time evolving dark energy with DESI DR2 BAO

Recently the Dark Energy Spectroscopic Instrument (DESI) provided constraints on the expansion history from their Data Release 2. The DESI baryon acoustic oscillation measurements are well described by a flat Λ CDM model, but the preferred parameters are in mild ( 2.3 σ ) tension with those determined from the cosmic microwave background. The DESI Collaboration has already explored a variety of solutions to this tension relying on variations in the late-time evolution of dark energy. Here we test an alternative—the introduction of an “early dark energy” (EDE) component. We find that EDE models can alleviate the tension, though they lead to differences in other cosmological parameters that have observational implications. Particularly the EDE models that fit the acoustic datasets prefer lower Ω m , higher H 0 , n s and σ 8 in contrast to the late-time solutions. Finally, we discuss the current status and near-future prospects for distinguishing amongst these solutions.

Baryon acoustic oscillations↗

Operation and performance of the ATLAS silicon micro-strip tracker

The Semiconductor Tracker (SCT) is the key precision tracking device in ATLAS, made from silicon micro-strip detectors processed in the planar p-in-n technology. The completed SCT has been installed inside the ATLAS experimental hall since 2007 and has been operational since then. In this paper the current status of the Semiconductor Tracker is reviewed, including results from the data-taking periods in 2009 and 2010, and from the detector alignment. The emphasis is given to the performance of the Semiconductor Tracker with the LHC in collision mode and to the performance of individual electronic components. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Imaging pion showers with the CALICE analogue hadron calorimeter

The CALICE collaboration investigates different technology options for highly granular calorimeters for detectors at a future electron-positron collider. One of the devices constructed and tested by the collaboration is a 1 m{sup 3} prototype for an imaging scintillator-steel sampling calorimeter for hadrons with analogue readout (AHCAL). The light from 7608 small scintillator cells is detected with silicon photomultipliers. The AHCAL has been successfully operated during electron and hadron test-beam measurements at DESY, CERN, and Fermilab since 2005. The collected data allow for evaluating the novel technologies employed. In addition, these data provide a valuable basis for validating pion cascade simulations. This paper presents the current status of comparisons between the AHCAL data and predictions from different Monte Carlo models implemented in GEANT4. The comparisons cover the total visible energy, longitudinal and radial shower profiles, and the shower substructure. Furthermore, this paper discusses a software compensation algorithm for improving the energy resolution of the AHCAL for single pions. (authors)

43 PARTICLE ACCELERATORS↗

Statistical Analysis of Abnormal Electric Power Grid Behavior

Pacific Northwest National Laboratory is developing a technique to analyze Phasor Measurement Unit data to identify typical patterns, atypical events and precursors to a blackout or other undesirable event. The approach combines a data-driven multivariate analysis with an engineering-model approach. The method identifies atypical events, provides a plane English description of the event, and the capability to use drill-down graphics for detailed investigations. The tool can be applied to the entire grid, individual organizations (e.g. TVA, BPA), or specific substations (e.g., TVA_CUMB). The tool is envisioned for (1) event investigations, (2) overnight processing to generate a Morning Report that characterizes the previous days activity with respect to previous activity over the previous 10-30 days, and (3) potentially near-real-time operation to support the grid operators. This paper presents the current status of the tool and illustrations of its application to real world PMU data collected in three 10-day periods in 2007.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Hashed Binary Search Sampling for Convolutional Network Training with Large Overhead Image Patches

Very large overhead imagery associated with ground truth maps has the potential to generate billions of training image patches for machine learning algorithms. However, random sampling selection criteria often leads to redundant and noisy-image patches for model training. With minimal research efforts behind this challenge, the current status spells missed opportunities to develop supervised learning algorithms that generalize over wide geographical scenes. In addition, much of the computational cycles for large scale machine learning are poorly spent crunching through noisy and redundant image patches. We demonstrate a potential framework to address these challenges specifically, while evaluating a human settlement detection task. A novel binary search tree sampling scheme is fused with a kernel based hashing procedure that maps image patches into hash-buckets using binary codes generated from image content. The framework exploits inherent redundancy within billions of image patches to promote mostly high variance preserving samples for accelerating algorithmic training and increasing model generalization.

Lunga, Dalton↗

Development of low mass optical readout for high data bandwidth systems.

At Argonne National Laboratory the High Energy Physics and Center for Nanoscale Materials Divisions are working on a project to develop a new generation of detector readout using high speed data transfer optical devices that can be implemented in particle physics or for long distances. Free-space communications devices offer the potential for reductions in mass, power, and cost of data paths for on-board trigger and readout of tracking detectors. The project involves three areas of study: light modulation, the design and construction of MEMS optical devices, and the control systems for maintaining precise laser light positioning. We demonstrate an optical link in air over one meter and with low error rate at 1 Gb/s. We demonstrate steering of an optical beam over a meter with a precision of 5 micrometers utilizing a MEMS mirror and reflected light in the feedback loop. For early testing, light modulation tests with a fiber link using Li-Niobate modulators and a data generation and error checking chip are done at 1 Gb/s. Many companies and universities are developing modulators which will be incorporated into CMOS chips. We are doing radiation hardness studies for one of the materials involved. Laser light will need to be steered on to and kept centered on the detector in the presence of thermal or mechanical motion, etc. This steering will be controlled by MEMS mirrors. Polycrystalline and crystalline silicon based mirror designs are being studied. We review the current status of the project and outline plans for the future development of the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Developing an Instrumentation Package for in-Water Testing of Marine Hydrokinetic Energy Devices: Preprint

The ocean-energy industry is still in its infancy and device developers have provided their own equipment and procedures for testing. Currently, no testing standards exist for ocean energy devices in the United States. Furthermore, as prototype devices move from the test tank to in-water testing, the logistical challenges and costs grow exponentially. Development of a common instrumentationpackage that can be moved from device to device is one means of reducing testing costs and providing normalized data to the industry as a whole. As a first step, the U.S. National Renewable Energy Laboratory (NREL) has initiated an effort to develop an instrumentation package to provide a tool to allow common measurements across various ocean energy devices. The effort is summarized in thispaper. First, we present the current status of ocean energy devices. We then review the experiences of the wind industry in its development of the instrumentation package and discuss how they can be applied in the ocean environment. Next, the challenges that will be addressed in the development of the ocean instrumentation package are discussed. For example, the instrument package must be highlyadaptable to fit a large array of devices but still conduct common measurements. Finally, some possible system configurations are outlined followed by input from the industry regarding its measurement needs, lessons learned from prior testing, and other ideas.

13 HYDRO ENERGY↗

The North American SynchroPhasor Initiative (NASPI)

Abstract--The North American SynchroPhasor Initiative (NASPI) is a joint effort between the U.S. Department of Energy (DOE) and the North American Electric Reliability Corporation (NERC) to improve power system reliability through wide-area measurement, monitoring and control by facilitating a robust, widely available and secure synchronized data measurement infrastructure for the interconnected North American electric power system with associated analysis and monitoring tools for better planning and operation, and improved reliability. This presentation will provide an overview of NASPI, including recent accomplishments, current status, and planned activities

electric variables measurement↗

The National Ignition Facility and the Path to Fusion Energy

The National Ignition Facility (NIF) is operational and conducting experiments at the Lawrence Livermore National Laboratory (LLNL). The NIF is the world's largest and most energetic laser experimental facility with 192 beams capable of delivering 1.8 megajoules of 500-terawatt ultraviolet laser energy, over 60 times more energy than any previous laser system. The NIF can create temperatures of more than 100 million degrees and pressures more than 100 billion times Earth's atmospheric pressure. These conditions, similar to those at the center of the sun, have never been created in the laboratory and will allow scientists to probe the physics of planetary interiors, supernovae, black holes, and other phenomena. The NIF's laser beams are designed to compress fusion targets to the conditions required for thermonuclear burn, liberating more energy than is required to initiate the fusion reactions. Experiments on the NIF are focusing on demonstrating fusion ignition and burn via inertial confinement fusion (ICF). The ignition program is conducted via the National Ignition Campaign (NIC) - a partnership among LLNL, Los Alamos National Laboratory, Sandia National Laboratories, University of Rochester Laboratory for Laser Energetics, and General Atomics. The NIC program has also established collaborations with the Atomic Weapons Establishment in the United Kingdom, Commissariat a Energie Atomique in France, Massachusetts Institute of Technology, Lawrence Berkeley National Laboratory, and many others. Ignition experiments have begun that form the basis of the overall NIF strategy for achieving ignition. Accomplishing this goal will demonstrate the feasibility of fusion as a source of limitless, clean energy for the future. This paper discusses the current status of the NIC, the experimental steps needed toward achieving ignition and the steps required to demonstrate and enable the delivery of fusion energy as a viable carbon-free energy source.

42 ENGINEERING↗

What's New in the NSRDB

The National Solar Radiation Database (NSRDB) provides solar resource data across the globe at a high temporal and spatial resolution. This data is primarily used in solar energy modeling. The NSRDB is updated annually for the United States and North, Central and South America and the data is currently available from 1998-2021. In 2022 the NSRDB was updated using the latest version of the underlying Physical Solar Model (PSM). This update includes improved surface albedo and gap-filling of cloud properties. The inclusion of these updates reduced the uncertainty in the data compared to previous versions of the NSRDB. The Himawari and Meteosat Indian Ocean Data Coverage (IODC) satellites were added to the Geostationary Operational Environmental Satellite (GOES) and made our coverage global. While standard data from the GOES continues to be served at an hourly 4km x 4km resolution, full resolution data has also been made available to the user. The NSRDB now contains over 200Tb of data with nearly 40Tb being added annually. We provide significant flexibility for data download depending on the amount of data required by the users. In this paper we provide an update on the current status on the NSRDB.

photovoltaic systems↗