Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conducting structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

The electronic structure and thermoelectric properties of BiTl{sub 9}Te{sub 6} and SbTl{sub 9}Te{sub 6}: First-principles calculations

The electronic structure and thermoelectric properties of MTl{sub 9}Te{sub 6} (M = Bi, Sb) were studied using density functional theory and the semiclassical Boltzmann theory. It is found that the band gaps of BiTl{sub 9}Te{sub 6} and SbTl{sub 9}Te{sub 6} are equal to 0.59 eV and 0.72 eV, respectively. The relative large band gap and strong coupling between Sb s and Te p are helpful to the thermoelectric properties of SbTl{sub 9}Te{sub 6}. Near the bottom of the conduction bands, the number of band valleys of SbTl{sub 9}Te{sub 6} is four and is larger than that of BiTl{sub 9}Te{sub 6} (two band valleys), which will increase its Seebeck coefficient. Although BiTl{sub 9}Te{sub 6} has a larger electrical conductivity relative to relaxation time (σ/τ) along the z-direction than that of SbTl{sub 9}Te{sub 6}, the results show that the transport properties of SbTl{sub 9}Te{sub 6} are better than those of BiTl{sub 9}Te{sub 6} possibly due to its large Seebeck coefficient. The maximum value of power factor relative to relaxation time (S{sup 2}σ/τ) for SbTl{sub 9}Te{sub 6} reaches 4.30 × 10{sup 11 }W/K{sup 2} m s at 900 K, that is, originated from its relatively large Seebeck coefficient, suggesting its promising thermoelectric performance at high temperature.

74 ATOMIC AND MOLECULAR PHYSICS↗

Graphite/Larc-160 technology demonstration segment test results

A structural test program was conducted on a Celion/LARC-160 graphite/polyimide technology demonstration segment (TDS) to verify the technology. The 137 x 152 cm (54 x 60 in.) TDS simulates a full-scale section of the orbiter composite body flap design incorporating three ribs and extending from the forward cove back to the rear spar. The TDS was successfully subjected to mechanical loads and thermal environments (-170 to 316 C) simulating 100 shuttle orbiter missions. Successful completion of the test program verified the design, analysis, and fabrication methodology for bonded Gr/PI honeycomb sandwich structure and demonstration that Gr/PI composite technology readiness is established.

Morita, W. H.↗

Adsorption-induced magnetic properties and metallic behavior of graphene

Magnetic properties and electronic structures of graphene with Cl, S, and P adsorption have been investigated using ab initio calculations. The adsorption of Cl leads to Fermi level shifting to valence band, which results in metallic graphene. A band gap of 0.6 eV emerges in a S-absorbed graphene, leading to the semiconducting graphene. The unpaired electrons in the absorbed P atom is polarized and thus, exhibits a magnetic moment of 0.86 μB, while no magnetic moment has been observed after Cl and S adsorption. This demonstrates that the magnetic properties and conductive behavior of graphene can be modified via atom adsorption. Specially, P-absorbed graphene may be useful for spintronic applications, such as tunneling magnetoresistance.

36 MATERIALS SCIENCE↗

Domain wall conduction in multiaxial ferroelectrics

The conductance of domain wall structures consisting of either stripes or cylindrical domains in multiaxial ferroelectric-semiconductors is analyzed. The effects of the flexoelectric coupling, domain size, wall tilt, and curvature on charge accumulation are analyzed using the Landau-Ginsburg Devonshire theory for polarization vector combined with the Poisson equation for charge distributions. The proximity and size effect of the electron and donor accumulation/depletion by thin stripe domains and cylindrical nanodomains are revealed. In contrast to thick domain stripes and wider cylindrical domains, in which the carrier accumulation (and so the static conductivity) sharply increases at the domain walls only, small nanodomains of radii less than 5-10 correlation lengths appeared conducting across the entire cross-section. Implications of such conductive nanosized channels may be promising for nanoelectronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of the transport properties of organic semiconductors based on europium diphthalocyanine and bi-tris-phthalocyanine complexes with ortho-bis(oxymethyl)phenyl bridge and based on erbium and europium dinaphthalocyanine complexes

The transport properties of organic semiconductors based on europium diphthalocyanine and bitris-phthalocyanine complexes with ortho-bis(oxymethyl)phenyl bridge and based on europium and erbium dinaphthalocyanine are studied. The temperature dependences of the dc conductivity for all types of the structures under study are obtained; it is shown that all dependences include two activation portions. For high-temperature portions, the activation energies are determined as 0.85 eV for europium diphthalocyanine with the ortho-bis(oxymethyl)phenyl bridge, 1.135 eV for europium bi-tris-phthalocyanine with the orthobis(oxymethyl)phenyl bridge, 0.98 eV for europium dinaphthalocyanine, and 1.18 eV for erbium dinaphthalocyanine. For the low-temperature activation portion, it is shown that lanthanide ions and their bond with a ligand make the dominant contribution to the conductivity of the structures under study.

36 MATERIALS SCIENCE↗

Improved photo-degradation of dyes over Ag-loaded NiTiO3:V nanorods on visible-light-irradiation

Highlights: • Ag/NiTiO{sub 3}:V nanorods were prepared by electrospinning synthesis. • The crystalline crystal structure was refined. • The optical absorption and band structure were clarified. • Photocatalysis was greatly enhanced in Ag/NiTiO{sub 3}:V nanorods. • The photocatalysis activities and mechanisms were discussed. - Abstract: Pure and V-doped NiTiO{sub 3} (NiTiO{sub 3}:V) nanorods were synthesized via electrospinning synthesis using sol–gel precursors, followed by sintering the samples at 600 °C. And the subsequent Ag-loaded NiTiO{sub 3}:V nanorods were prepared by the chemical precipitation method (Ag/NiTiO{sub 3}:V). The phase formations were studied via X-ray powder diffraction (XRD) measurements. The Rietveld refinements were conducted to investigate the structural characteristics. The surface property of the nanorods was measured via morphologies and X-ray photon spectrascope (XPS) measurements. The absorption spectra of products indicate sufficient optical response in visible wavelength region. The indirect allowed band gap (2.18 eV) of NiTiO{sub 3} originates from the characteristic charge-transfer (CT) transitions of O{sup 2−} → Ti{sup 4+} (UV region) and Ni{sup 2+} → Ti{sup 4+} (visible light region). While Ag/NiTiO{sub 3}:V composites have a smaller band energy of 2.09 eV. The photocatalytic activities were investigated by photo-degradation of Rhodamine B (RhB) dye solutions under visible-light irradiation. The Ag/NiTiO{sub 3}:V nanorods were efficient for the photo-degradation of RhB dye solutions. EIS measurements were used to analyze the charge-carrier migration at the interfaces. The improved photocatalysis of Ag/NiTiO{sub 3}:V is ascribed to the narrowed band energy and enhanced efficiencies of the charge separations due to the Ag-coupling and V-doping in NiTiO{sub 3} lattices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermoelectric properties of binary LnN (Ln=La and Lu): First principles study

First principles density functional calculations were carried out to study the electronic structure and thermoelectric properties of LnN (Ln = La and Lu) using the full potential linearized augmented plane wave (FP-LAPW) method. The thermoelectric properties were calculated by solving the Boltzmann transport equation within the constant relaxation time approximation. The obtained lattice parameters are in good agreement with the available experimental and other theoretical results. The calculated band gaps using the Tran-Blaha modified Becke-Johnson potential (TB-mBJ), of both compounds are in good agreement with the available experimental values. Thermoelectric properties like thermopower (S), electrical conductivity scaled by relaxation time (σ/τ) and power-factor (S{sup 2}σ/τ) are calculated as functions of the carrier concentration and temperature for both compounds. The calculated thermoelectric properties are compared with the available experimental results of the similar material ScN.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-throughput exploration of thermoelectric and mechanical properties of amorphous NbO{sub 2} with transition metal additions

To increase the thermoelectric efficiency and reduce the thermal fatigue upon cyclic heat loading, alloying of amorphous NbO{sub 2} with all 3d and 5d transition metals has systematically been investigated using density functional theory. It was found that Ta fulfills the key design criteria, namely, enhancement of the Seebeck coefficient and positive Cauchy pressure (ductility gauge). These quantum mechanical predictions were validated by assessing the thermoelectric and elastic properties on combinatorial thin films, which is a high-throughput approach. The maximum power factor is 2813 μW m{sup −1} K{sup −2} for the Ta/Nb ratio of 0.25, which is a hundredfold increment compared to pure NbO{sub 2} and exceeds many oxide thermoelectrics. Based on the elasticity measurements, the consistency between theory and experiment for the Cauchy pressure was attained within 2%. On the basis of the electronic structure analysis, these configurations can be perceived as metallic, which is consistent with low electrical resistivity and ductile behavior. Furthermore, a pronounced quantum confinement effect occurs, which is identified as the physical origin for the Seebeck coefficient enhancement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Elucidation of Agonist and Antagonist Dynamic Binding Patterns in ER-α by Integration of Molecular Docking, Molecular Dynamics Simulations and Quantum Mechanical Calculations

Estrogen receptor alpha (ERα) is a ligand-dependent transcriptional factor in the nuclear receptor superfamily. Many structures of ERα bound with agonists and antagonists have been determined. However, the dynamic binding patterns of agonists and antagonists in the binding site of ERα remains unclear. Therefore, we performed molecular docking, molecular dynamics (MD) simulations, and quantum mechanical calculations to elucidate agonist and antagonist dynamic binding patterns in ERα. 17β-estradiol (E2) and 4-hydroxytamoxifen (OHT) were docked in the ligand binding pockets of the agonist and antagonist bound ERα. The best complex conformations from molecular docking were subjected to 100 nanosecond MD simulations. Hierarchical clustering was conducted to group the structures in the trajectory from MD simulations. The representative structure from each cluster was selected to calculate the binding interaction energy value for elucidation of the dynamic binding patterns of agonists and antagonists in the binding site of ERα. The binding interaction energy analysis revealed that OHT binds ERα more tightly in the antagonist conformer, while E2 prefers the agonist conformer. The results may help identify ERα antagonists as drug candidates and facilitate risk assessment of chemicals through ER-mediated responses.

59 BASIC BIOLOGICAL SCIENCES↗

Influence of Boron doping on the structural, optical and electrical properties of CdO thin films by spray pyrolysis technique

Cadmium oxide and Boron (B) doped Cadmium oxide thin films were deposited using spray pyrolysis technique. The structural, morphological, electrical and optical properties of undoped and B doped CdO films are analyzed by varying the dopant concentration in the solution. The structural study shows the polycrystalline nature and cubic structure of undoped and B doped CdO thin films. Surface morphological study reveals that the grains are spherical in shape. Optical and electrical studies showed n-type semiconducting nature and optical band gap of 2.44 eV of deposited thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of cobalt impurity ions on the magnetic and electrical properties of iron monosilicide crystals

The results of experimental investigations of Fe{sub 1-x}Co{sub x}Si crystals in the impurity limit with x = 0.001, 0.005, and 0.01 are reported. The temperature and field dependences of the magnetic susceptibility have been studied. According to the experimental data, the introduction of cobalt impurity leads to a change in the energy structure, which is most pronounced in a change in the electrical properties. The temperature, field, and concentration dependences of the resistivity have been measured. The results have been interpreted in the framework of the Kondo model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-RAY PHOTOEMISSION ANALYSIS OF PASSIVATED Cd(1-x)ZnxTe SURFACES FOR IMPROVED RADIATION DETECTORS

Surface passivation of device-grade CdZnTe was investigated using x-ray photoelectron spectroscopy in combination with transport property measurements after Br-MeOH (2% Br) and KOH/NH{sub 4}F/H{sub 2}O{sub 2} solutions were used to etch and oxidize the surface. High-resolution photoemission measurements on the valence band electronic structure and core lines were used to evaluate the surface chemistry of the chemically treated surfaces. Metal overlayers were then deposited on these chemically treated surfaces and the I-V characteristics measured. The measurements were correlated to understand the effect of interface chemistry on the electronic structure at these interfaces with the goal of optimizing the Schottky barrier height for radiation detector devices.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Isochronal annealing effects on local structure, crystalline fraction, and undamaged region size of radiation damage in Ga-stabilized δ-Pu

The effects on the local structure due to self-irradiation damage of Ga stabilized δ-Pu stored at cryogenic temperatures have been examined using extended x-ray absorption fine structure (EXAFS) experiments. Extensive damage, seen as a loss of local order, was evident after 72 days of storage below 15 K. The effect was observed from both the Pu and the Ga sites, although less pronounced around Ga. Isochronal annealing was performed on this sample to study the annealing processes that occur between cryogenic and room temperature storage conditions, where damage is mostly reversed. Damage fractions at various points along the annealing curve have been determined using an amplitude-ratio method, a standard EXAFS fitting, and a spherical crystallite model, and provide information complementary to the previous electrical resistivity- and susceptibility-based isochronal annealing studies. The use of a spherical crystallite model accounts for the changes in EXAFS spectra using just two parameters, namely, the crystalline fraction and the particle radius. Together, these results are discussed in terms of changes to the local structure around Ga and Pu throughout the annealing process and highlight the unusual role of Ga in the behavior of the lowest temperature anneals.

36 MATERIALS SCIENCE↗

Pinhole electrical conductivity in polycrystalline Si on locally etched SiN$_y$/SiO$_x$ passivating contacts for Si solar cells

State-of-the-art monocrystalline Si (c-Si) solar cells require passivating contacts to achieve a high degree of charge-carrier separation and collection. In this work, we focus on boron-doped polycrystalline Si on locally etched silicon nitride/silicon oxide (PLENO) passivating contacts. In PLENO contacts, excellent surface passivation is provided by the ~10 nm dielectric bilayer, while pinholes in the dielectric bilayer, that are filled with doped polycrystalline Si, provide charge-carrier selectivity and transport. During PLENO fabrication, etch undercut in the dielectric bilayer occurs. Here, using electrical characterization and microscopies, we show that undercut causes pinholes to be electrically resistive in PLENO. A processing sequence that eliminates the undercut in the final PLENO structure results in electrically conductive pinholes with low contact resistivity.

14 SOLAR ENERGY↗

Ternary rare-earth ruthenium and iridium germanides RE{sub 3}M{sub 2}Ge{sub 3} (RE=Y, Gd–Tm, Lu; M=Ru, Ir)

Through arc-melting reactions of the elements and annealing at 800 °C, the ternary rare-earth germanides RE{sub 3}Ru{sub 2}Ge{sub 3} and RE{sub 3}Ir{sub 2}Ge{sub 3} have been prepared for most of the smaller RE components (RE=Y, Gd–Tm, Lu). In the iridium-containing reactions, the new phases RE{sub 2}IrGe{sub 2} were also generally formed as by-products. Powder X-ray diffraction revealed orthorhombic Hf{sub 3}Ni{sub 2}Si{sub 3}-type structures (space group Cmcm, Z=4) for RE{sub 3}M{sub 2}Ge{sub 3} (M=Ru, Ir) and monoclinic Sc{sub 2}CoSi{sub 2}-type structures (space group C2/m, Z=4) for RE{sub 2}IrGe{sub 2}. Full crystal structures were determined by single-crystal X-ray diffraction for all members of RE{sub 3}Ru{sub 2}Ge{sub 3} (a=4.2477(6) Å, b=10.7672(16) Å, c=13.894(2) Å for RE=Y; a=4.2610(3)–4.2045(8) Å, b=10.9103(8)–10.561(2) Å, c=14.0263(10)–13.639(3) Å in the progression of RE from Gd to Lu) and for Tb{sub 3}Ir{sub 2}Ge{sub 3} (a=4.2937(3) Å, b=10.4868(7) Å, c=14.2373(10) Å). Both structures can be described in terms of CrB- and ThCr{sub 2}Si{sub 2}-type slabs built from Ge-centred trigonal prisms. However, band structure calculations on Y{sub 3}Ru{sub 2}Ge{sub 3} support an alternative description for RE{sub 3}M{sub 2}Ge{sub 3} based on [M{sub 2}Ge{sub 3}] layers built from linked MGe{sub 4} tetrahedra, which emphasizes the strong M–Ge covalent bonds present. The temperature dependence of the electrical resistivity of RE{sub 3}Ru{sub 2}Ge{sub 3} generally indicates metallic behaviour but with low-temperature transitions visible for some members (RE=Gd, Tb, Dy) that are probably associated with magnetic ordering of the RE atoms. Anomalously, Y{sub 3}Ru{sub 2}Ge{sub 3} exhibits semiconductor-like behaviour of uncertain origin. Magnetic measurements on Dy{sub 3}Ru{sub 2}Ge{sub 3} reveal antiferromagnetic ordering at 3 K and several unusual field-dependent transitions suggestive of complex spin reorientation processes. - Graphical abstract: RE{sub 3}M{sub 2}Ge{sub 3} (M=Ru, Ir) adopts the Hf{sub 3}Ni{sub 2}Si{sub 3}-type structure containing slabs built up from Ge-centred trigonal prisms. - Highlights: • Crystal structures of RE{sub 3}Ru{sub 2}Ge{sub 3} (RE=Y, Gd–Tm, Lu) and Tb{sub 3}Ir{sub 2}Ge{sub 3} were determined. • Strong M–Ge covalent bonds were confirmed by band structure calculations. • Most RE{sub 3}Ru{sub 2}Ge{sub 3} members except Y{sub 3}Ru{sub 2}Ge{sub 3} exhibit metallic behaviour. • Dy{sub 3}Ru{sub 2}Ge{sub 3} displays unusual field-dependent magnetic transitions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

EVA Assembly of Large Space Structure Neutral Buoyancy, Zero-Gravity Simulation: NASA-LaRC Nestable Columns and Joints

The film depicts an extravehicular activity (EVA) that involved the assembly of six "space-weight" columns into a regular tetrahedral cell by a team of two "space"-suited test subjects. This cell represents the fundamental "element" of a tetrahedral truss structure. The tests were conducted under simulated zero-gravity conditions, achieved by neutral buoyancy in water. The cell was assembled on an "outrigger" assembly aid off the side of a mockup of the Shuttle Orbiter cargo bay. Both manual and simulated remote manipulator system (RMS) modes were evaluated. The simulated RMS was used only to transfer stowed hardware from the cargo bay to the work sites. Articulation limits of the pressure suit and zero gravity could be accommodated by work stations with foot restraints. The results of this study have confirmed that astronaut EVA assembly of large, erectable space structur is well within man's capabilities.

TESTS↗

Transcriptional Regulation of Grass Secondary Cell Wall Biosynthesis: Playing Catch-Up with Arabidopsis thaliana

Secondary cell wall synthesis occurs in specialized cell types following completion of cell enlargement. By virtue of mechanical strength provided by a wall thickened with cellulose, hemicelluloses, and lignin, these cells can function as water-conducting vessels and provide structural support. Several transcription factor families regulate genes encoding wall synthesis enzymes. Certain NAC and MYB proteins directly bind to the SNBE and AC elements upstream of structural genes and other transcription factors. The most detailed model of this regulatory network is established predominantly for a eudicot, Arabidopsis thaliana. In grasses, both the patterning and the composition of secondary cell walls are distinct from that of eudicots. These differences suggest transcriptional regulation is similarly distinct. Putative rice and maize orthologs of several eudicot cell wall regulators genetically complement mutants of A. thaliana or result in wall defects when constitutively overexpressed; nevertheless, aside from a maize, ZmMYB31, and a switchgrass protein, PvMYB4, function has not been tested in a grass. Similar to the seminal work conducted in A. thaliana, gene expression profiling in maize, rice, and other grasses implicates additional genes as regulators. Characterization of these genes will continue to elucidate the relationship between the transcription regulatory networks of eudicots and grasses.

54 ENVIRONMENTAL SCIENCES↗

First-Principles Discovery of Novel LiInP 2 S 6 Polymorphs with Promising Optoelectronic Responses

Recent advances in two-dimensional (2D) van der Waals (vdW) metal thiophosphates have attracted considerable attention due to their promising ionic conductivity, optical characteristics, and tunable physical properties. Within this material family, LiInP 2 S 6 has emerged as an intriguing candidate, not only because of its sensitivity to air and moisture but also due to its suitable band gap within the UV−vis range, enabling potential optoelectronic and photocatalytic applications. In this study, through comprehensive first-principles investigations, we unveil two previously unreported polymorphs of LiInP 2 S 6 in the monoclinic C2/c and trigonal P3̅1c (in-gap) space groups, in addition to examining the experimentally synthesized P3̅1c (in-layer) phase. Our studies identify the C2/c structure as the ground state, lying 9 meV per unit cell lower in energy than the experimentally realized trigonal P3̅1c (in-layer) phase. Further, we systematically examine the elastic, mechanical, thermodynamical, dynamical, electronic, and optical properties of all three polymorphs, confirming their mechanical, thermal, and dynamical stability. Notably, the P3̅1c (in-gap) phase exhibits enhanced stiffness, while the calculated indirect band gaps and strong photon absorption in the UV−vis range (∼3 eV) highlight the potential of the studied LiInP 2 S 6 phases for iontronic devices and optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗