Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wind Speed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Magnetized Winds of M-type Stars and Star–Planet Magnetic Interactions: Uncertainties and Modeling Strategy

M-type stars are the most common stars in the Universe. They are ideal hosts for the search of exoplanets in the habitable zone (HZ), as their small size and low temperature make the HZ much closer-in than their solar twins. Harboring very deep convective layers, they also usually exhibit very intense magnetic fields. Understanding their environment, in particular their coronal and wind properties, is thus very important, as they might be very different from what is observed in the solar system. The mass-loss rate of M-type stars is poorly known observationally, and recent attempts to estimate it for some of them (e.g., TRAPPIST-1 and Proxima Centauri) can vary by an order of magnitude. In this work, we revisit the stellar wind properties of M dwarfs in the light of the latest estimates of $\dot{M}$ through Lyα absorption at the astropause and slingshot prominences. We outline a modeling strategy to estimate the mass-loss rate, radiative loss, and wind speed, with uncertainties, based on an Alfvén-wave-driven stellar wind model. We find that it is very likely that several TRAPPIST-1 planets lie within the Alfvén surface, which implies that these planets experience star–planet magnetic interactions (SPMIs). We also find that SPMIs between Proxima Cen b and its host star could be the reason for recently observed radio emissions.

M stars↗

A kinematic investigation of the influence of anvil air flow over convective nephsystems on high-level horizontal flow

The interactions between horizontal ambient flow and divergent wind fields, such as those that obtain atop cumulonimbus complexes, were investigated (theoretically) kinematically. The following were observed from the results of the analyses. First, for a particular divergent field, the relative mass flux over the area of the nephsystem decreased as the strength of the horizontal flow increased. Secondly, while in some of the cases analyzed the interaction between the two flows only resulted in the fanning out of streamlines and a slight redistribution in the wind speed, in many cases backflows and a total reorganization of the wind field occurred. Backflows have a blocking effect on the horizontal flow. Some of the computed patterns were compared with upper level cloud vectors (from geostationary satellite photographs). The comparison indicated that the computed resultant wind field could be used to explain some features of such satellite-derived wind fields.

Balogun, E. E.↗

A model function for ocean radar cross sections at 14.6 GHz

The relationship between the ocean's normalized radar cross section (NRCS) at 14.6 GHz and the surface wind vector is derived using the 3 months of Seasat microwave scatterometer (SASS) measurements. The derivation is based on the statistics of the SASS observations, and no in situ measurements are required, other than a mean global wind speed, which comes from climatology. The frequency distribution of the global wind vectors observed by SASS is assumed to be a bivariate normal probability function. A NRCS model function is found that maps the assumed wind vector statistics into the observed SASS NRCS statistics. This function is compared with a NRCS model coming from the Joint Air Sea Interaction Experiment (JASIN) and with aircraft scatterometer measurements. The results indicate that the statistically derived NRCS model is an improvement over the JASIN model, which was based on a limited number of in situ anemometer measurements.

Wentz, F. J.↗

Static Wind-Tunnel and Radio-Controlled Flight Test Investigation of a Remotely Piloted Vehicle Having a Delta Wing Planform

At the request of the United States Marine Corps, an exploratory wind-tunnel and flight test investigation was conducted by the Flight Dynamics Branch at the NASA Langley Research Center to improve the stability, controllability, and general flight characteristics of the Marine Corps Exdrone RPV (Remotely Piloted Vehicle) configuration. Static wind tunnel tests were conducted in the Langley 12 foot Low Speed Wind Tunnel to identify and improve the stability and control characteristics of the vehicle. The wind tunnel test resulted in several configuration modifications which included increased elevator size, increased vertical tail size and tail moment arm, increased rudder size and aileron size, the addition of vertical wing tip fins, and the addition of leading-edge droops on the outboard wing panel to improve stall departure resistance. Flight tests of the modified configuration were conducted at the NASA Plum Tree Test Site to provide a qualitative evaluation of the flight characteristics of the modified configuration.

Yip, Long P.↗

Ocean radar backscatter relationship with near-surface winds - A case study during Fasinex

A case study of the ocean radar backscatter dependence on near-surface wind and wind stress is presented using the data obtained on February 18, 1986 during the Frontal Air-Sea Interaction Experiment. The particular wind-wave conditions and their variations across a sharp sea surface temperature front are described. The small change in wind speed across the front cannot account for the large change in wind stress implying significant changes in the drag coefficient and surface roughness length. The results strengthen the hypothesis that radar backscatter is closely correlated to wind stress, and therefore, could be used for remote sensing of the wind stress itself over the global oceans.

Li, F.↗

Anomalous aspects of magnetosheath flow and of the shape and oscillations of the magnetopause during an interval of strongly northward interplanetary magnetic field

On February 15, 1978, the orientation of the IMF remained steadily northward for more than 12 hours. Using plasma and magnetic field data from ISEE 1 and 2, IMP 8, and IMP 7, we show that (1) the magnetosheath flow speed on the flanks of the magnetotail steadily exceeded the solar wind speed by 20 percent, (2) surface waves of about 5-min period and very nonsinusoidal waveform were persistently present on the dawn magnetopause and waves of similar period were present in the dusk magnetosheath, and (3) the magnetotail ceased to flare at an antisunward distance of 15 earth radii. We propose that the acceleration of the magnetosheath flow is achieved by magnetic tension in the draped field configuration for northward IMP; the reduction of tail flaring is consistent with a decreased amount of open magnetic flux and a larger standoff distance of the subsolar magnetopause. Results of a 3D MHD simulation support this phenomenological model.

Chen, Sheng-Hsien↗

Scale-Model, Low-Tip-Speed Turbofan Tested at Simulated Takeoff and Approach Conditions

Tests are currently being performed in the NASA Lewis Research Center's 9- by 15-Foot Low-Speed Wind Tunnel on a Pratt & Whitney designed l ow-tip-speed fan. The test objectives are to determine the acoustic, aerodynamic, and aeromechanical performance of this low-speed, high-b ypass-ratio fan stage. Noise reductions from various combinations of engine nacelle acoustic treatments are also being obtained.

Source record↗

Comparative Validation of Realtime Solar Wind Forecasting Using the UCSD Heliospheric Tomography Model

The University of California, San Diego 3D Heliospheric Tomography Model reconstructs the evolution of heliospheric structures, and can make forecasts of solar wind density and velocity up to 72 hours in the future. The latest model version, installed and running in realtime at the Community Coordinated Modeling Center(CCMC), analyzes scintillations of meter wavelength radio point sources recorded by the Solar-Terrestrial Environment Laboratory(STELab) together with realtime measurements of solar wind speed and density recorded by the Advanced Composition Explorer(ACE) Solar Wind Electron Proton Alpha Monitor(SWEPAM).The solution is reconstructed using tomographic techniques and a simple kinematic wind model. Since installation, the CCMC has been recording the model forecasts and comparing them with ACE measurements, and with forecasts made using other heliospheric models hosted by the CCMC. We report the preliminary results of this validation work and comparison with alternative models.

MacNeice, Peter↗

Acoustic Performance of an Advanced Model Turbofan in Three Aeroacoustic Test Facilities

A model advanced turbofan was acoustically tested in the NASA Glenn 9- by 15-Foot-Low-Speed Wind Tunnel (LSWT), and in two other aeroacoustic facilities. The Universal Propulsion Simulator (UPS) fan was designed and manufactured by the General Electric Aircraft Engines (GEAE) Company, and featured active core, as well as bypass, flow paths. The reference test configurations were with the metal, M4, rotor with hardwall and treated bypass flow ducts. The UPS fan was tested within an airflow at a Mach number of 0.20 (limited flow data were also acquired at a Mach number of 0.25) which is representative of aircraft takeoff and approach conditions. Comparisons were made between data acquired within the airflow (9x15 LSWT and German-Dutch Wind Tunnel (DNW)) and outside of a free jet (Boeing Low Speed Aero acoustic Facility (LSAF) and DNW). Sideline data were acquired on an 89-in. (nominal 4 fan diameters) sideline using the same microphone assembly and holder in the 9x15 LSWT and DNW facilities. These data showed good agreement for similar UPS operating conditions and configurations. Distortion of fan spectra tonal content through a free jet shear layer was documented, suggesting that in-flow acoustic measurements are required for comprehensive fan noise diagnostics. However, there was good agreement for overall sound power level (PWL) fan noise measurements made both within and outside of the test facility airflow.

Woodward, Richard P.↗

Assessing Upper-Level Winds on Day-of-Launch

On the day-or-launch. the 45th Weather Squadron Launch Weather Officers (LWOS) monitor the upper-level winds for their launch customers to include NASA's Launch Services Program (LSP). During launch operations, the payload launch team sometimes asks the LWO if they expect the upper level winds to change during the countdown but the LWOs did not have the capability to quickly retrieve or display the upper-level observations and compare them to the numerical weather prediction model point forecasts. The LWOs requested the Applied Meteorology Unit (AMU) develop a capability in the form of a graphical user interface (GUI) that would allow them to plot upper-level wind speed and direction observations from the Kennedy Space Center Doppler Radar Wind Profilers and Cape Canaveral Air Force Station rawinsondes and then overlay model point forecast profiles on the observation profiles to assess the performance of these models and graphically display them to the launch team. The AMU developed an Excel-based capability for the LWOs to assess the model forecast upper-level winds and compare them to observations. They did so by creating a GUI in Excel that allows the LWOs to first initialize the models by comparing the O-hour model forecasts to the observations and then to display model forecasts in 3-hour intervals from the current time through 12 hours.

Bauman, William H., III↗

LA-8 Computational Analysis and Validation Studies Using FlightStream

With the emerging market of Urban Air Mobility and the associated unique new flight vehicles with the capability of vertical takeoff and landing, design tools need to be calibrated to assist in the development of these new flight vehicle concepts. Distributed electric propulsion (DEP) covers these vehicles with high-energy flow from the array of motors, which leads to extensive propulsion/airframe interaction effects. With limited experimental data of vehicles using DEP and vehicle operation across a large range of angles of attack, including post-stall conditions, there is a lack of validated design tools to advance new vehicle concepts that have blown wings and operate in multiple flight modes. Although some CFD tools can handle the integration of multiple propulsors and unique geometries, the computational time with a full vehicle is extraordinary. FlightStream, a surface vorticity flow solver that can run in a fraction of the time of other CFD methods, has been evaluated using the Langley Aerodrome No. 8 (LA-8) vehicle as a test case. The LA-8 vehicle is a DEP tandem tilt-wing research vehicle that was designed, built, and tested at NASA Langley Research Center. The LA-8 design features both high-performance and high-technical risks aspects. The vehicle has gone through extensive design of experiments wind tunnel testing in the NASA Langley 12-Foot Low-Speed Wind Tunnel in order to capture all modes of operation. In addition, the LA-8 vehicle has undergone wind tunnel testing with and without propellers, which contributes to the validation of FlightStream for aerodynamic performance in blown and unblown wing cases. This study shows that FlightStream can produce trends and magnitudes of the lift and drag coefficients similar to the data collected from the wind tunnel testing of LA-8. The test cases were both blown and unblown wing cases and with and without high lift control surface deflections.

Steven Curtis Geuther↗

Estimation of Large-Scale Wind Field Characteristics Using Supervisory Control and Data: Preprint

As the wind energy industry continues to pushfor increased power production and lower cost of energy, thefocus of research has expanded from individual turbines toentire wind farms. Among a host of interesting problems to besolved when considering the wind farm as a whole, we considerthe challenge of scalar field estimation, based on informationalready collected at the individual turbine level. We aim toestimate the large-scale, low-frequency characteristics of thewind field, such as the mean wind direction and the overalldecrease in wind speed across the farm, and employ a Kalmanfilter that models the wind field using a polynomial function.We compare the proposed method’s performance to both asimple averaging technique and filtering of individual turbinemeasurements. The method presented is not limited to windturbines and is applicable in other situations where multipleremote agents are used to estimate a scalar field.

large scale↗

Tip aerodynamics from wind tunnel test of semi-span wing

Presented are the results of a low-speed wind tunnel test on a 5.33-aspect-ratio, semi-span wing with 30- and 35 deg swept tapered tips. The test results include aerodynamic data for the tip itself and for the entire wing including the tip. The metric tip extended inboard 1.58 wing chord lengths. The aerodynamic drag data show the strong influence of tip incidence angle on tip drag for various lift levels. Pitching-moment characteristics show the effect of a moment center at 0.13 c and 0.25 c.

Vanaken, Johannes M.↗

An evolving MHD vortex street model for quasi-periodic solar wind fluctuations

Magnetohydrodynamic (MHD) simulation are used to provide a dynamical basis for the 'vortex street' model of the quasi-periodic meridional flow observed by Voyager 2 in the outer heliosphere. Various observations suggest the existence near the current sheet at solar minimum, of a vorticity distribution of two opposite shear layers with an antisymmetric staggered velocity pattern due to structured high-speed wind surrounding low-speed equatorial flow. It is shown that this flow pattern leads to the formation of a highly stable vortex street through the nonlinear interaction of the two shear layers. Spatial profiles of various simulated parameters (velocity, density, meridional flow angle and the location of magnetic sector boundaries) and their relative locations in the quasi-steady vortex street are generally in good agreement with the observations.

Siregar, Edouard↗

Investigation of rotor blade element airloads for a teetering rotor in the blade stall regime (second wind tunnel test)

A test was conducted in the NASA-Ames 7 x 10 ft low speed wind tunnel on a seven-foot diameter model of a teetering rotor. The objectives of the test were: (1) acquire pressure data for correlation with laser and flow visualization measurements; (2) explore rotor propulsive force limits by varying the advance ratio at constant lift and propulsive force coefficients; (3) obtain additional data to define the differences between teetering and articulated rotors; and (4) verify the acceleration sensitivity of experimental transducers. Results are presented.

Dadone, L. U.↗