Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WOOD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Plant, insect, and fungi fossils under the center of Greenland’s ice sheet are evidence of ice-free times

The persistence and size of the Greenland Ice Sheet (GrIS) through the Pleistocene is uncertain. This is important because reconstructing changes in the GrIS determines its contribution to sea level rise during prior warm climate periods and informs future projections. To understand better the history of Greenland’s ice, we analyzed glacial till collected in 1993 from below 3 km of ice at Summit, Greenland. The till contains plant fragments, wood, insect parts, fungi, and cosmogenic nuclides showing that the bed of the GrIS at Summit is a long-lived, stable land surface preserving a record of deposition, exposure, and interglacial ecosystems. Knowing that central Greenland was tundra-covered during the Pleistocene informs the understanding of Arctic biosphere response to deglaciation.

58 GEOSCIENCES↗

Factors underlying a latitudinal gradient in the S/G lignin monomer ratio in natural poplar variants

The chemical composition of wood plays a pivotal role in the adaptability and structural integrity of trees. However, few studies have investigated the environmental factors that determine lignin composition and its biological significance in plants. Here, we examined the lignin syringyl-to-guaiacyl (S/G) ratio in members of a Populus trichocarpa population sourced from their native habitat and conducted a genome wide association study to identify genes linked to lignin formation. Our results revealed many significant associations, suggesting that lignin biosynthesis is a complex polygenic trait. Additionally, we found an increase in the S/G ratio from northern to southern geographic origin of the trees sampled, along with a corresponding metabolic and transcriptional reprogramming of xylem cell wall biosynthesis. Further molecular analysis identified a mutation in a cell wall laccase genetically associated with higher S/G ratios that predominate in trees from warmer lower latitudes. Collectively, our findings suggest that lignin heterogeneity arises from an evolutionary process enabling poplar adaptation to different climatic challenges.

adaptation↗

Insights into an unusual Auxiliary Activity 9 family member lacking the histidine brace motif of lytic polysaccharide monooxygenases

Lytic polysaccharide monooxygenases (LPMOs) are redox-enzymes involved in biomass degradation. All characterized LPMOs possess an active site of two highly conserved histidine residues coordinating a copper ion (the histidine brace), which are essential for LPMO activity. However, some protein sequences that belong to the AA9 LPMO family display a natural N-terminal His to Arg substitution (Arg-AA9). These are found almost entirely in the phylogenetic fungal class Agaricomycetes, associated with wood decay, but no function has been demonstrated for any Arg-AA9. Through bioinformatics, transcriptomic, and proteomic analyses we present data, which suggest that Arg-AA9 proteins could have a hitherto unidentified role in fungal degradation of lignocellulosic biomass in conjunction with other secreted fungal enzymes. We present the first structure of an Arg-AA9, LsAA9B, a naturally occurring protein from Lentinus similis The LsAA9B structure reveals gross changes in the region equivalent to the canonical LPMO copper-binding site, whereas features implicated in carbohydrate binding in AA9 LPMOs have been maintained. We obtained a structure of LsAA9B with xylotetraose bound on the surface of the protein although with a considerably different binding mode compared with other AA9 complex structures. In addition, we have found indications of protein phosphorylation near the N-terminal Arg and the carbohydrate-binding site, for which the potential function is currently unknown. Finally, our results are strong evidence that Arg-AA9s function markedly different from canonical AA9 LPMO, but nonetheless, may play a role in fungal conversion of lignocellulosic biomass.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Realistic operation of two residential cordwood-fired outdoor hydronic heater appliances—Part 3: Optical properties of black and brown carbon emissions

Residential biomass combustion is a source of carbonaceous aerosol. Inefficient combustion, particularly of solid fuels produces large quantities of black and brown carbon (BC and BrC). These particle types are important as they have noted effects on climate forcing and human health. One method of measuring these quantities is by measurement of aerosol light-absorption and scattering, which can be performed using an aethalometer and nephelometer, respectively. These instruments are widely deployed in the study of ambient air and are frequently used in air quality modeling and source apportionment studies. In this study, we will describe (1) a method for measuring primary BC and BrC emissions from two residential log-fired wood hydronic heaters and (2) the BC and BrC emission from these devices over a wide range of operating conditions, such as cold-starts, warm-starts, four different levels of output ranging from 15% to 100% maximum rated output, and periods of repeated cycling. The range in flue-gas BC concentrations, measured using an aethalometer at the 880 nanometer (nm) wavelength, were between 5.09 × 10 2 and 2.24 × 10 4 micrograms per cubic meter (µg/m 3 ) while the scattering coefficient of the flue-gas, measured by a nephelometer at 880 nm, ranged between 2.20 × 10 3 and 8.56 × 10 5 inverse megameters (Mm –1 ). The BrC concentrations, measured using the 370 nm wavelength of an aethalometer, were between 9.10 × 10 1 and 3.56 × 10 4 µg/m 3 . The calculated Angstrom Absorption Exponent (AAE) of the flue-gas aerosol ranged between 1.54 and 3.63. Performing a comparison between the measured BC concentration and an external particulate matter (PM) concentration showed that overall BC makes up roughly a quarter of the PM emitted by either of the two appliances. Further for both appliances, the cold-start and the test phase immediately following it had the highest BC and BrC concentrations, the highest measured scattering coefficient, as well as a low AAE.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Effect of toolpath in large-format additive manufacturing with bio-derived composites

There has been growing interest in integrating bio-derived composites into Large-format additive manufacturing (LFAM) feedstocks to reduce the use of petroleum-derived materials and reduce the overall carbon footprint of LFAM. However, these materials present unique challenges during manufacturing due to their variability, which can lead to unintended deformations and failures attributable to suboptimal process conditions. While numerical modelling has been extensively employed to simulate numerous manufacturing processes, its application in LFAM with bio-derived composites remains limited. This study addresses this gap by systematically developing a numerical model to simulate the LFAM process using bio-based materials, specifically wood fiber-reinforced polylactic acid (PLA/WF). Experimental investigations were conducted to characterise the thermal and mechanical properties of additively manufactured PLA/WF specimens. Numerical simulations were performed to predict temperature profiles and deformations during LFAM. The effect of varying infill patterns, internal structures, and tool paths on the temperature distribution and deformation of printed parts was explored using the developed model. This article aims to advance the utilisation of bio-derived composites in LFAM systems and provide a comprehensive understanding of the LFAM process. The findings offer valuable insights for optimising process parameters and enhancing the performance of LFAM with bio-based composites.

Large-format additive manufacturing↗

SPECTROSCOPY OF HIGH-REDSHIFT SUPERNOVAE FROM THE ESSENCE PROJECT: THE FIRST FOUR YEARS

We present the results of spectroscopic observations from the ESSENCE high-redshift supernova (SN) survey during its first four years of operation. This sample includes spectra of all SNe Ia whose light curves were presented by Miknaitis et al. and used in the cosmological analyses of Davis et al. and Wood-Vasey et al. The sample represents 273 hr of spectroscopic observations with 6.5-10 m class telescopes of objects detected and selected for spectroscopy by the ESSENCE team. We present 184 spectra of 156 objects. Combining this sample with that of Matheson et al., we have a total sample of 329 spectra of 274 objects. From this, we are able to spectroscopically classify 118 Type Ia SNe. As the survey has matured, the efficiency of classifying SNe Ia has remained constant while we have observed both higher-redshift SNe Ia and SNe Ia farther from maximum brightness. Examining the subsample of SNe Ia with host-galaxy redshifts shows that redshifts derived from only the SN Ia spectra are consistent with redshifts found from host-galaxy spectra. Moreover, the phases derived from only the SN Ia spectra are consistent with those derived from light-curve fits. By comparing our spectra to local templates, we find that the rate of objects similar to the overluminous SN 1991T and the underluminous SN 1991bg in our sample are consistent with that of the local sample. We do note, however, that we detect no object spectroscopically or photometrically similar to SN 1991bg. Although systematic effects could reduce the high-redshift rate we expect based on the low-redshift surveys, it is possible that SN 1991bg-like SNe Ia are less prevalent at high redshift.

79 ASTRONOMY AND ASTROPHYSICS↗

GX 9+9: VARIABILITY OF THE X-RAY ORBITAL MODULATION

Results of observations of the Galactic bulge X-ray source GX 9+9 by the All-Sky Monitor (ASM) and Proportional Counter Array (PCA) onboard the Rossi X-ray Timing Explorer are presented. The ASM results show that the 4.19 hr X-ray periodicity first reported by Hertz and Wood in 1987 was weak or not detected for most of the mission prior to late 2004, but then became strong and remained strong for approximately two years after which it weakened considerably. When the modulation at the 4.19 hr period is strong, it appears in folded light curves as an intensity dip over {approx}<30% of a cycle and is distinctly nonsinusoidal. A number of PCA observations of GX 9+9 were performed before the appearance of strong modulation; two were performed in 2006 during the epoch of strong modulation. Data obtained from the earlier PCA observations yield, at best, limited evidence of the presence of phase-dependent intensity changes, while the data from the later observations confirm the presence of flux minima with depths and phases compatible with those apparent in folded ASM light curves. Light curves from a Chandra observation of GX 9+9 performed in the year 2000 prior to the start of strong modulation show the possible presence of shallow dips at the predicted times. Optical observations performed in 2006 while the X-ray modulation was strong do not show an increase in the degree of modulation at the 4.19 hr period. Implications of the changes in modulation strength in X-rays and other observational results are considered.

79 ASTRONOMY AND ASTROPHYSICS↗

H{alpha} AND FREE-FREE EMISSION FROM THE WARM IONIZED MEDIUM

Recent observations have found the ratio of H{alpha} to free-free radio continuum to be surprisingly high in the diffuse ionized interstellar medium (the so-called warm ionized medium), corresponding to an electron temperature of only {approx}3000 K. Such low temperatures were unexpected in gas that was presumed to be photoionized. We consider a three-component model for the observed diffuse emission, consisting of a mix of (1) photoionized gas, (2) gas that is recombining and cooling, and (3) cool H I gas. This model can successfully reproduce the observed intensities of free-free continuum, H{alpha}, and collisionally excited lines such as [N II]6583. To reproduce the low observed value of free-free to H{alpha}, the polycyclic aromatic hydrocarbon abundance in the photoionized regions must be lowered by a factor {approx}3, and {approx}20% of the diffuse H{alpha} must be reflected from dust grains, as suggested by Wood and Reynolds.

79 ASTRONOMY AND ASTROPHYSICS↗

GPU-BASED MONTE CARLO DUST RADIATIVE TRANSFER SCHEME APPLIED TO ACTIVE GALACTIC NUCLEI

A three-dimensional parallel Monte Carlo (MC) dust radiative transfer code is presented. To overcome the huge computing-time requirements of MC treatments, the computational power of vectorized hardware is used, utilizing either multi-core computer power or graphics processing units. The approach is a self-consistent way to solve the radiative transfer equation in arbitrary dust configurations. The code calculates the equilibrium temperatures of two populations of large grains and stochastic heated polycyclic aromatic hydrocarbons. Anisotropic scattering is treated applying the Heney-Greenstein phase function. The spectral energy distribution (SED) of the object is derived at low spatial resolution by a photon counting procedure and at high spatial resolution by a vectorized ray tracer. The latter allows computation of high signal-to-noise images of the objects at any frequencies and arbitrary viewing angles. We test the robustness of our approach against other radiative transfer codes. The SED and dust temperatures of one- and two-dimensional benchmarks are reproduced at high precision. The parallelization capability of various MC algorithms is analyzed and included in our treatment. We utilize the Lucy algorithm for the optical thin case where the Poisson noise is high, the iteration-free Bjorkman and Wood method to reduce the calculation time, and the Fleck and Canfield diffusion approximation for extreme optical thick cells. The code is applied to model the appearance of active galactic nuclei (AGNs) at optical and infrared wavelengths. The AGN torus is clumpy and includes fluffy composite grains of various sizes made up of silicates and carbon. The dependence of the SED on the number of clumps in the torus and the viewing angle is studied. The appearance of the 10 {mu}m silicate features in absorption or emission is discussed. The SED of the radio-loud quasar 3C 249.1 is fit by the AGN model and a cirrus component to account for the far-infrared emission.

79 ASTRONOMY AND ASTROPHYSICS↗

On the necessity of composition-dependent low-temperature opacity in models of metal-poor asymptotic giant branch stars

The vital importance of composition-dependent low-temperature opacity in low-mass (M ≤ 3 M {sub ☉}) asymptotic giant branch (AGB) stellar models of metallicity Z ≥ 0.001 has recently been demonstrated. Its significance to more metal-poor, intermediate-mass (M ≥ 2.5 M {sub ☉}) models has yet to be investigated. We show that its inclusion in lower-metallicity models ([Fe/H] ≤–2) is essential and that there exists no threshold metallicity below which composition-dependent molecular opacity may be neglected. We find it to be crucial in all intermediate-mass models investigated ([Fe/H] ≤–2 and 2.5 ≤ M/M {sub ☉} ≤ 5), because of the evolution of the surface chemistry, including the orders of magnitude increase in the abundance of molecule-forming species. Its effect on these models mirrors that previously reported for higher-metallicity models—increase in radius, decrease in T {sub eff}, faster mass loss, shorter thermally pulsing AGB lifetime, reduced enrichment in third dredge-up products (by a factor of 3-10), and an increase in the mass limit for hot bottom burning. We show that the evolution of low-metallicity models with composition-dependent low-temperature opacity is relatively independent of initial metal abundance because its contribution to the opacity is far outweighed by changes resulting from dredge-up. Our results imply a significant reduction in the expected number of nitrogen-enhanced metal-poor stars, which may help explain their observed paucity. We note that these findings are partially a product of the macrophysics adopted in our models, in particular, the Vassiliadis and Wood mass loss rate which is strongly dependent on radius.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurements and modeling of total solar irradiance in X-class solar flares

The Total Irradiance Monitor (TIM) from NASA's SOlar Radiation and Climate Experiment can detect changes in the total solar irradiance (TSI) to a precision of 2 ppm, allowing observations of variations due to the largest X-class solar flares for the first time. Presented here is a robust algorithm for determining the radiative output in the TIM TSI measurements, in both the impulsive and gradual phases, for the four solar flares presented in Woods et al., as well as an additional flare measured on 2006 December 6. The radiative outputs for both phases of these five flares are then compared to the vacuum ultraviolet (VUV) irradiance output from the Flare Irradiance Spectral Model (FISM) in order to derive an empirical relationship between the FISM VUV model and the TIM TSI data output to estimate the TSI radiative output for eight other X-class flares. This model provides the basis for the bolometric energy estimates for the solar flares analyzed in the Emslie et al. study.

79 ASTRONOMY AND ASTROPHYSICS↗

‘Hard’ crystalline lattice in the Weyl semimetal NbAs

Here, we report the effect of hydrostatic pressure on the magnetotransport properties of the Weyl semimetal NbAs. Subtle changes can be seen in the ρ xx (T) profiles with pressure up to 2.31 GPa. The Fermi surfaces undergo an anisotropic evolution under pressure: the extremal areas slightly increase in the k x -k y plane, but decrease in the k z -k y (k x ) plane. The topological features of the two pockets observed at atmospheric pressure, however, remain unchanged at 2.31 GPa. No superconductivity can be seen down to 0.3 K for all the pressures measured. By fitting the temperature dependence of specific heat to the Debye model, we obtain a small Sommerfeld coefficient γ 0 =0.09(1) mJ (mol•K 2 ) -1 and a large Debye temperature, θ D =450(9) K, confirming a 'hard' crystalline lattice that is stable under pressure. We also studied the Kadowaki–Woods ratio of this low-carrier-density massless system, R KW =3.2 x 10 4 μΩ cm mol2 K 2 J -2 . After we account for the small carrier density in NbAs, this R KW indicates a suppressed transport scattering rate relative to other metals.

36 MATERIALS SCIENCE↗

Changes of deformed shell gaps at N ~ 100 in light rare-earth, neutron-rich nuclei

There have been compelling evidences indicating that deformed single-particle states in neutron- rich regions are different from those in the stable region. It was pointed out that for the light rare- earth (60Nd, 62Sm, and 64Gd), neutron-rich (N = 98-102) nuclei, the Woods-Saxon potential, the Nilsson modified oscillator potential with "universal" parameters, and the folded Yukawa potential all failed to describe the correct ordering of neutron single-particle states. The location and size of deformed shell gaps in this mass region are under current debate. We propose a modification for the "standard" Nilsson parameters of Bengtsson and Ragnarsson introduced in 1985. The proposed N-dependent spin-orbit interaction brings an effect of the tensor force for the deformed potential, which causes dynamic changes in deformed shell gaps with neutron number and deformation. By applying the modified Nilsson parameters to generate deformed bases for the Projected Shell Model, we demonstrate that the calculation can explain consistently the current experimental data, including the ground state configuration in odd-neutron nuclei, upbending of the yrast moment of inertia at higher spins and the energies of 2-quasineutron 6- and 4- isomers in even-even nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Existence of a flat band in highly correlated metal BaCo 2 P 2

We report on the observation of a flat band situated at the Fermi level E F along with the structural, electrical transport, and magnetic properties of BaCo 2 P 2 that crystallizes in the ThCr 2 Si 2 -type body-center tetragonal structure. This compound has the largest inter-layer pnictide (Pn) distance d Pn–Pn as well as the largest c/a ratio among all the known ACo 2 Pn 2 (A = alkaline earth metal) compounds, where a and c are the tetragonal lattice parameters. Hence, the magnetic and electronic properties of this compound are expected to have a quasi-two-dimensional character. Despite the evidence of the presence of sizable magnetic interactions, magnetic susceptibility χ(T) of BaCo 2 P 2 does not show magnetic ordering down to 1.8 K. The material shows good metallic conduction with a large residual resistivity ratio ρ 300 K /ρ 1.8 K ≈ 70 and a Fermi liquid behavior at low temperature. Kadowaki–Woods ratio R KW of BaCo 2 P 2 suggests the presence of sizable electronic correlations within this system. Additionally, a large many-body enhancement of 2.3 of the experimental density of states D γ (E F ) over the band-structure D band (E F ) is inferred to arise from sizable electron-electron and/or electron-phonon interactions leading to a substantial deviation from the free-electron behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Regional carbon fluxes from land use and land cover change in Asia, 1980–2009

We present a synthesis of the land-atmosphere carbon flux from land use and land cover change (LULCC) in Asia using multiple data sources and paying particular attention to deforestation and forest regrowth fluxes. The data sources are quasi-independent and include the U.N. Food and Agriculture Organization-Forest Resource Assessment (FAO-FRA 2015; country-level inventory estimates), the Emission Database for Global Atmospheric Research (EDGARv4.3), the 'Houghton' bookkeeping model that incorporates FAO-FRA data, an ensemble of 8 state-of-the-art Dynamic Global Vegetation Models (DGVM), and 2 recently published independent studies using primarily remote sensing techniques. The estimates are aggregated spatially to Southeast, East, and South Asia and temporally for three decades, 1980–1989, 1990–1999 and 2000–2009. Since 1980, net carbon emissions from LULCC in Asia were responsible for 20%–40% of global LULCC emissions, with emissions from Southeast Asia alone accounting for 15%–25% of global LULCC emissions during the same period. In the 2000s and for all Asia, three estimates (FAO-FRA, DGVM, Houghton) were in agreement of a net source of carbon to the atmosphere, with mean estimates ranging between 0.24 to 0.41 Pg C yr -1 , whereas EDGARv4.3 suggested a net carbon sink of -0.17 Pg C yr -1 . Three of 4 estimates suggest that LULCC carbon emissions declined by at least 34% in the preceding decade (1990–2000). Spread in the estimates is due to the inclusion of different flux components and their treatments, showing the importance to include emissions from carbon rich peatlands and land management, such as shifting cultivation and wood harvesting, which appear to be consistently underreported.

54 ENVIRONMENTAL SCIENCES↗

Joint linkage and association mapping of complex traits in shrub willow (Salix purpurea L.)

Abstract Background and Aims Increasing energy demands and the necessity to reduce greenhouse gas emissions are key motivating factors driving the development of lignocellulosic crops as an alternative to non-renewable energy sources. The effects of global climate change will require a better understanding of the genetic basis of complex adaptive traits to breed more resilient bioenergy feedstocks, like willow (Salix spp.). Shrub willow is a sustainable and dedicated bioenergy crop, bred to be fast-growing and high-yielding on marginal land without competing with food crops. In a rapidly changing climate, genomic advances will be vital for the sustained improvement of willow and other non-model bioenergy crops. Here, joint genetic mapping was used to exploit genetic variation garnered from both recent and historical recombination events in S. purpurea. Methods A panel of North American naturalized S. purpurea accessions and full-sib F2S. purpurea population were genotyped and phenotyped for a suite of morphological, physiological, pest and disease resistance, and wood chemical composition traits, collected from multi-environment and multi-year replicated field trials. Controlling for population stratification and kinship in the association panel and spatial variation in the F2, a comprehensive mixed model analysis was used to dissect the complex genetic architecture and plasticity of these important traits. Key Results Individually, genome-wide association (GWAS) models differed in terms of power, but the combined approach, which corrects for yearly and environmental co-factors across datasets, improved the overall detection and resolution of associated loci. Although there were few significant GWAS hits located within support intervals of QTL for corresponding traits in the F2, many large-effect QTL were identified, as well as QTL hotspots. Conclusions This study provides the first comparison of linkage analysis and linkage disequilibrium mapping approaches in Salix, and highlights the complementarity and limits of these two methods for elucidating the genetic architecture of complex bioenergy-related traits of a woody perennial breeding programme.

Plant Sciences↗

Impact of developmental methylmercury exposure on avian embryonic development, hatchling growth, and survival

Abstract Methylmercury (MeHg) is a globally ubiquitous and persistent environmental toxicant that negatively affects animal behavior, health, and reproduction. In birds, MeHg is transferred from female to egg, contaminating embryos during sensitive stages of early embryonic development and growth. This toxic exposure in the prenatal environment not only induces mortality but also possible lasting impacts on physiology, health, and survival, even once hatched. The purpose of our study was to further elucidate the negative effects of MeHg exposure during avian embryonic development and explore how such exposure can impact offspring development, growth, and survival, both in ovo and posthatch. To assess this, we experimentally dosed fertile mallard and wood duck eggs with MeHg II chloride and reared developing embryos and ducklings to various endpoints. We found that embryos not only readily accumulated MeHg throughout incubation, but they also displayed varying dose-dependent disparities in body mass and morphometrics, with control individuals being larger during early and late embryonic stages of development (p < 0.05). Furthermore, hatched offspring exposed to MeHg exhibited increasingly slower growth rates between 7 to 10 and 10 to 15 days posthatch (p < 0.05), and were found to have lower survival probabilities both under controlled laboratory conditions (p < 0.005), and in the natural environment (p < 0.05). Our findings on the detrimental effects of MeHg on avian embryos and hatchlings emphasize the need for more proactive means of environmental protection and remediation to protect vulnerable avian populations and the ecosystems they inhabit.

Leaphart, James C.↗

High-resolution mapping reveals hotspots and sex-biased recombination in Populus trichocarpa

Abstract Fine-scale meiotic recombination is fundamental to the outcome of natural and artificial selection. Here, dense genetic mapping and haplotype reconstruction were used to estimate recombination for a full factorial Populus trichocarpa cross of 7 males and 7 females. Genomes of the resulting 49 full-sib families (N = 829 offspring) were resequenced, and high-fidelity biallelic SNP/INDELs and pedigree information were used to ascertain allelic phase and impute progeny genotypes to recover gametic haplotypes. The 14 parental genetic maps contained 1,820 SNP/INDELs on average that covered 376.7 Mb of physical length across 19 chromosomes. Comparison of parental and progeny haplotypes allowed fine-scale demarcation of cross-over regions, where 38,846 cross-over events in 1,658 gametes were observed. Cross-over events were positively associated with gene density and negatively associated with GC content and long-terminal repeats. One of the most striking findings was higher rates of cross-overs in males in 8 out of 19 chromosomes. Regions with elevated male cross-over rates had lower gene density and GC content than windows showing no sex bias. High-resolution analysis identified 67 candidate cross-over hotspots spread throughout the genome. DNA sequence motifs enriched in these regions showed striking similarity to those of maize, Arabidopsis, and wheat. These findings, and recombination estimates, will be useful for ongoing efforts to accelerate domestication of this and other biomass feedstocks, as well as future studies investigating broader questions related to evolutionary history, perennial development, phenology, wood formation, vegetative propagation, and dioecy that cannot be studied using annual plant model systems.

59 BASIC BIOLOGICAL SCIENCES↗