Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VIBRATION EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

A first principles approach for determining solute effect on electrical resistivity of Aluminum solid solution

There are no general approaches for predicting the effect of solutes on electrical resistivity changes in aluminum (Al) solid solutions. Here, we introduce a first principles-based approach for predicting temperature-dependent electrical resistivity of Al solid solutions. A combination of electronic structure methods was applied to calculate electronic scattering effects on chemical disorder and temperature induced atomic vibrations or phonons. Our calculations are validated by contrasting experimental resistivity measurements for two elements in Al solid solution: at 0.3 at. % concentration, Sn (an sp-valence solute) increases the residual resistivity by 0.2 μΩ·m, whereas Zr (a d-valence solute) causes a 2.5 μΩ·m increase. This trend may deviate for solute elements in Al that form semiconductors in pure state, like Si. Our findings provide an understanding of the role of valence electron character of solute atoms in determining electrical resistivity of Al alloys.

Samolyuk, German [ORNL] (ORCID:0000000168778255)↗

Cu(II) Stability and UV-Induced Electron Transfer in a Metal–Organic Hybrid: An EPR, DFT, and Crystallographic Characterization of Copper-Doped Zinc Creatininium Sulfate

Single-crystal X-ray diffraction and electron paramagnetic resonance (EPR) spectroscopic experiments, complemented by quantum chemical DFT calculations, were carried out on the copper-doped metal–organic hybrid and Tutton salt analogue zinc creatininium sulfate to determine its crystal structure, to characterize the electronic structure of the doped Cu(II) binding site, and to propose a pathway for an excited-state, proton-coupled electron transfer (PCET) process in UV-exposed crystals. The crystal structure is isomorphous to that of cadmium creatininium sulfate, which has the transition ion, not in direct coordination with the creatinine, but forming a hexahydrate complex, which is bridged to a creatininium through an intervening sulfate ion. The EPR g (2.446, 2.112, 2.082) and copper hyperfine (A Cu : -327, -59.6, 10.8 MHz) tensor parameters are consistent with doped copper replacing host zinc in the metal–hexahydrate complex. These parameters are similar to those observed for copper hexahydrate in doped Tutton salt systems at low temperature, where the unpaired electron occupies mainly the copper 3d x 2 –y 2 orbital. At room temperature in the Tutton systems, vibration couplings stemming from a dynamic Jahn–Teller effect cause tensor averaging which results in a reduction in their maximum g-tensor and hyperfine tensor values. However, like for the doped isomorphous Cd creatinine crystal, the Cu(II) EPR exhibits little, or no room temperature averaging compared to its low temperature pattern. Samples exposed to 254 nm UV light generate a carbon-centered free radical species, characterized by an isotropic g-tensor (g = 2.0029) and an alpha-proton hyperfine coupling (-24 -14 +4 G). These parameters identify it as a creatinine radical cation formed by the oxidative release of one of its C2 methylene hydrogens. DFT calculations confirm the unpaired electronic structures of both the Cu(II) site and free radical. The growth in radical concentration with an increase in the UV exposure time coincides with a decrease in the copper EPR signal, indicating a coupled light-induced oxidation reduction process. A comparison of the crystal structure with the EPR parameters and DFT results provides evidence for a UV-induced PCET.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deuteration as a Means to Tune Crystallinity of Conducting Polymers

The effects of deuterium isotope substitution on conjugated polymer chain stacking of poly(3-hexylthiophene) is studied in this paper experimentally by X-ray diffraction (XRD) in combination with gel permeation chromatography and theoretically using density functional theory and quantum molecular dynamics. For four P3HT materials with different levels of deuteration (pristine, main-chain deuterated, side-chain deuterated, and fully deuterated), the XRD measurements show that main-chain thiophene deuteration significantly reduces crystallinity, regardless of the side-chain deuteration. The reduction of crystallinity due to the main-chain deuteration is a quantum nuclear effect resulting from a static zero-point vibrational energy combined with a dynamic correlation of the dipole fluctuations. The quantum molecular dynamics simulations confirm the interchain correlation of the proton–proton and deuteron–deuteron motions but not of the proton–deuteron motion. Thus and finally, isotopic purity is an important factor affecting stability and properties of conjugated polymer crystals, which should be considered in the design of electronic and spintronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Emergent interface vibrational structure of oxide superlattices

As the length scales of materials decrease, the heterogeneities associated with interfaces become almost as important as the surrounding materials. This has led to extensive studies of emergent electronic and magnetic interface properties in superlattices. However, the interfacial vibrations that affect the phonon-mediated properties, such as thermal conductivity, are measured using macroscopic techniques that lack spatial resolution. Although it is accepted that intrinsic phonons change near boundaries, the physical mechanisms and length scales through which interfacial effects influence materials remain unclear. Here we demonstrate the localized vibrational response of interfaces in strontium titanate–calcium titanate superlattices by combining advanced scanning transmission electron microscopy imaging and spectroscopy, density functional theory calculations and ultrafast optical spectroscopy. Structurally diffuse interfaces that bridge the bounding materials are observed and this local structure creates phonon modes that determine the global response of the superlattice once the spacing of the interfaces approaches the phonon spatial extent. Our results provide direct visualization of the progression of the local atomic structure and interface vibrations as they come to determine the vibrational response of an entire superlattice. Direct observation of such local atomic and vibrational phenomena demonstrates that their spatial extent needs to be quantified to understand macroscopic behaviour. Tailoring interfaces, and knowing their local vibrational response, provides a means of pursuing designer solids with emergent infrared and thermal responses.

36 MATERIALS SCIENCE↗

Barrier Distribution of Quasi-elastic Backward Scattering of {sup 48}Ti, {sup 54}Cr, {sup 56}Fe, {sup 64}Ni, {sup 70}Zn and {sup 86}Kr on {sup 208}Pb

In order to study the nucleus-nucleus interaction in Pb-based cold fusion, we have measured excitation functions for quasi-elastic scattering of {sup 48}Ti, {sup 54}Cr, {sup 56}Fe, {sup 64}Ni, {sup 70}Zn and {sup 86}Kr projectiles on {sup 208}Pb target at backward angles. The barrier distributions were derived from the first derivative of measured quasi-elastic scattering cross sections relative to the Rutherford scattering cross section. The centroids of the barrier distributions show a deviation from several predicted barrier heights toward the low energy side. The shape of the barrier distributions is well reproduced by the results of a coupled-channel calculation taking account of the coupling effects of two phonon excitations of the quadrupole vibration for the projectiles and of the octupole vibration for the {sup 208}Pb target.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Barrier distribution of quasi-elastic backward scattering

In order to study the nucleus-nucleus interaction in Pb-based cold fusion, we have measured excitation functions for quasi-elastic scattering of {sup 48}Ti, {sup 54}Cr, {sup 56}Fe, {sup 64}Ni, {sup 70}Zn and {sup 86}Kr projectiles on {sup 208}Pb target at backward angles. The barrier distributions were derived from the first derivative of measured quasi-elastic scattering cross sections relative to the Rutherford scattering cross section. The centroids of the barrier distributions show a deviation from several predicted barrier heights toward the low energy side. The shape of the barrier distributions is well reproduced by the results of a coupled-channel calculation taking account of the coupling effects of two phonon excitations of the quadrupole vibration for the projectiles and of the octupole vibration for the {sup 208}Pb target.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Direct measurement of laser-induced frequency shift rate of ultracold cesium molecules by analyzing losses of trapped atoms

We report on a quantitative experimental determination of the laser-induced frequency shift rate of the ultracold cesium molecules formed via photoassociation (PA) by means of the trap loss measurement of the losses of trapped atoms in a standard magneto-optical trap. The experiment was directly performed by varying the photoassociation laser intensity without any additional frequency monitor technologies. Our experimental method utilized dependences of the losses on the laser-induced frequency shift rate based on the conditions of the identified photoassociation spectral shape. We demonstrated that the method is sensitive enough to determine small frequency shifts of rovibrational levels of ultracold cesium molecules.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effective role of deposition duration on the growth of V{sub 2}O{sub 5} nanostructured thin films

In this report, vanadium pentoxide nanostructured thin films (NSTs) with nanoplates (NPs) have synthesized on Ni coated glass substrate employing plasma assisted sublimation process (PASP), as a function of deposition/growth durations. The effect of deposition durations on the morphological, structural, vibrational, and compositional properties have been investigated one by one. The structural and vibrational studies endorsed that the grown NPs have only orthorhombic phase, no other sub oxide phases are recorded in the limit of resolution. The morphological results of all samples using SEM, revealed that the features, coverage density, and alignments of NPs are greatly controlled by deposition duration and the best sample is obtained for 25 min (S2). Further, the more insight information is accomplished by HRTEM/SAED on the best featured sample, which confirmed the single crystalline nature of NPs. The XPS result again confirmed the compositional purity and the nearly stoichiometric nature of NPs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Entanglement generation of nitrogen-vacancy centers via coupling to nanometer-sized resonators and a superconducting interference device

We present a potential scheme to entangle negatively charged nitrogen-vacancy (N-V) centers in distance using nanomechanical resonators (NAMRs) and a common superconducting quantum interference device (SQUID). By virtually exciting the vibrational modes of the NAMRs, we show the effective coupling between the N-V centers and the SQUID, which is a promising step toward large-sized quantum-information processing with separate N-V centers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Precisely mapping the magnetic field gradient in vacuum with an atom interferometer

The magnetic field gradient has been measured with an atom interferometer using the magnetic sublevels of {sup 87}Rb atoms. The Doppler-insensitive measurement effectively eliminates the contribution from gravity and background vibration noise, and the differential measurement also can reject some systematic errors. A resolution of 300 pT/mm has been demonstrated with a 90-s integration time and a spatial resolution of 1.4 mm. The gradiometer was then used to measure the magnetic field gradient in an ultrahigh-vacuum environment. The technique will also be very useful to subtract the systematic error arising from the magnetic field inhomogeneity in precision atom-interferometry experiments, such as gravity measurement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Coexistence of Charge Order and Superconductivity in {ital {beta}'}'-(BEDT-TTF){sub 2}SF{sub 5}CH{sub 2}CF{sub 2}SO{sub 3}.

In the all-organic paramagnetic correlated metal beta ''-(BEDT-TTF)(2)SF(5)CH(2)CF(2)SO(3 )spin fluctuations can be ruled out as the glue to superconductivity below T-c = 5.5 K. Instead, we demonstrate the coupling of charge degrees of freedom to the superconducting state, which occurs adjacent to a charge-ordered insulating phase. A comparison to isostructural beta ''-(BEDT-TTF)(2)SF(5)RSO3 compounds reveals that superconductivity is suppressed when the system is tuned away from the insulator towards the metal; an enhanced charge imbalance, on the other hand, leads to an increase in T-c, suggesting an involvement of charge fluctuations. By locally probing the charge disproportionation through the superconducting transition, we discover slight modifications of the Fano coupling constant and intensity at T-c, indicating the effect of the paired electrons on the molecular vibrations.

Pustogow, A.↗

The Effect of Ligands and Solvents on Nonradiative Transitions in Semiconductor Quantum Dots (A Review)

Data on quantum yields and photoluminescence decay times of quantum dots have been collected. Photoprocesses that occur in quantum dots are compared with photoprocesses occurring in complex organic molecules in the condensed phase. The review consists of the introduction, three parts, and conclusions. The first two parts are devoted to quantum dots that are formed by indirect-gap semiconductors. The first part is devoted to data on the photoluminescence quantum yields and decay times of carbon quantum dots, and Table 1 presents selected values and short comments to these data. Table 2 of the same part presents data on fast relaxation processes in the same objects. In the second part, Tables 3 and 4, as well as the following text, contain similar information about silicon quantum dots. Data on photoprocesses in quantum dots formed by direct-gap semiconductors are collected in the third part. Data on the photoluminescence yields, decay times, and relaxation processes are listed in Tables 5 and 6. Particular attention in the present review is given to the effect that a change in the frequency of vibrations in the environment of a quantum dot has on the photoluminescence yields and the rate of relaxation processes between electronic levels in bands, which indicates that the inductive resonance mechanism of nonradiative transitions is applicable to these systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Atomic configuration and charge state of hydrogen at dislocations in silicon

The effect of the introduction of hydrogen upon the vibration spectra and electrical characteristics of samples with dislocation networks at the interface of bonded silicon wafers was studied. In order to improve the sensitivity of measurements and to distinguish the signal from dislocation networks in Raman spectra, thin foils conventionally prepared for transmission electron microscopy were used as the sample under investigation. In the samples with dislocation networks, a Raman peak at 2000 cm{sup –1} was observed. This peak survived after annealing at a temperature of T = 500°C and was not observed in reference samples. Comparison of the experimental data with currently available theoretical calculations allowed one to attribute the observed peak to neutral hydrogen atoms H{sup 0} at the center of Si–Si bonds. The peak is metastable in the ideal lattice, but becomes stable in the vicinity of dislocations.

36 MATERIALS SCIENCE↗

Multi-Function Gas Fired Heat Pump

The aim of this project was to design a residential fuel fired heat pump and further improve efficiency in collaboration with an industry partner – Southwest Gas, the developer of the Nextaire commercial rooftop fuel-fired heat pump. Work started in late 2010. After extensive search for suitable engines, one manufactured by Marathon was selected. Several prototypes were designed and built over the following four years. Design changes were focused on lowering the cost of components and the cost of manufacturing. The design evolved to a final one that yielded the lowest cost. The final design also incorporates noise and vibration reduction measures that were verified to be effective through a customer survey. ETL certification is currently (as of November 2015) underway. Southwest Gas is currently in talks with GTI to reach an agreement through which GTI will assess the commercial viability and potential of the heat pump. Southwest Gas is searching for investors to manufacture the heat pump and introduce it to the market.

42 ENGINEERING↗

Hydrokinetic Power Conversion Using Vortex-Induced Oscillation with Cubic Restoring Force

A cubic-spring restoring function with high-deformation stiffening is introduced to passively improve the harnessed marine hydrokinetic power by using flow-induced oscillations/vibrations (FIO/V) of a cylinder. In these FIO/V experiments, a smooth, rigid, single-cylinder on elastic end-supports is tested at Reynolds numbers ranging from 24,000 < Re < 120,000. The parameters of the tested current energy converter (CEC) are cubic stiffness and linear damping. Using the second generation of digital virtual spring-damping (Vck) controller developed by the Marine Renewable Energy Laboratory (MRELab), the cubic modeling of the oscillator stiffness is tested. Experimental results show the influence of the parameter variation on the amplitude, frequency, energy conversion, energy efficiency, and power of the converter. All experiments are conducted in the low turbulence-free surface water (LTFSW) channel of the MRELab of the University of Michigan. The main conclusions are: (1) The nonlinearity in the cubic oscillator is an effective way to extend the vortex-induced vibration (VIV) upper branch, which results in higher harnessing power and efficiency compared to the linear stiffness cylinder converter. (2) Compared to the linear converter, the overall power increase is substantial. The nonlinear power optimum, occurring at the end of the VIV upper branch, is 63% higher than its linear counterpart. (3) The cubic stiffness converter with low harnessing damping achieves consistently good performance in all the VIV regions because of the hardening restoring force, especially at higher flow velocity.

13 HYDRO ENERGY↗

Vibration tests on vidicons made by improved method

Sensitive method is used for checking the performance of vidicons in mechanical vibration tests. The image of the desired fine-detail test pattern is stored in the photosensitive surface of the vidicon while the system is free of mechanical vibration. Mechanical excitation is then applied, and its effects observed.

Source record↗