Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TABLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Mariner Mars 1971 television picture catalog. Volume 2: Sequence design and picture coverage

A collection of data relating to the Mariner 9 TV picture is presented. The data are arranged to offer speedy identification of what took place during entire science cycles, on individual revolutions, and during individual science links or sequences. Summary tables present the nominal design for each of the major picture-taking cycles, along with the sequences actually taken on each revolution. These tables permit identification at a glance, all TV sequences and the corresponding individual pictures for the first 262 revolutions (primary mission). A list of TV pictures, categorized according to their latitude and longitude, is also provided. Orthographic and/or mercator plots for all pictures, along with pertinent numerical data for their center points are presented. Other tables and plots of interest are also included. This document is based upon data contained in the Supplementary Experiment Data Record (SEDR) files as of 21 August 1972.

Koskela, P. E.↗

Abundances of the elements.

An elemental abundance table along the lines used by Suess and Urey (1956) is presented. Since this early work, other studies have been made, and improvement in the abundance tables has been made as more reliable data have become available. Some changes in the original tables have been made, but the original abundances and their variations with mass numbers remain remarkably similar. The solar abundance of iron for many years appeared to be very much less relative to silicon than would be indicated by the data from the meteorites.

Urey, H. C.↗

Flow in a porous nozzle with massive wall injection

An analytical and experimental investigation has been conducted to determine the effect of massive wall injection on the flow characteristics in a nozzle. The experiments were performed on a water table with a porous-nozzle test section. This had 45 deg and 15 deg half angles of convergence and divergence, respectively, throat radius of 2.5 inches, and throat width of 3 inches. The hydraulic analogy was employed to qualitatively extend the results to a compressible gas flow through the nozzle. An analysis of the water table flow was made using a one-dimensional flow assumption in the continuity and momentum equations. An analysis of a compressible flow in a nozzle was made in a manner analogous to that for the water flow. It is shown that the effect of blowing is to move the sonic position downstream of the geometric throat. Similar results were determined for the incompressible water table flow. Limited photographic results are presented for an injection of air, CO2, and Freon-12 into a main-stream air flow in a convergent-divergent nozzle. Schlieren photographs were used to visualize the flow.

Kinney, R. B.↗

Flow in a discrete slotted nozzle with massive injection

An experimental investigation has been conducted to determine the effect of massive wall injection on the flow characteristics in a slotted nozzle. Some of the experiments were performed on a water table with a slotted-nozzle test section. This has 45 deg and 15 deg half angles of convergence and divergence, respectively, throat radius of 2.5 inches, and throat width of 3 inches. The hydraulic analogy was employed to qualitatively extend the results to a compressible gas flow through the nozzle. Experimental results from the water table include contours of constant Froude and Mach number with and without injection. Photographic results are also presented for the injection through slots of CO2 and Freon-12 into a main-stream air flow in a convergent-divergent nozzle in a wind tunnel. Schlieren photographs were used to visualize the flow, and qualititative agreement between the results from the gas tunnel and water table is good.

Perkins, H. C.↗

IMS/Satellite Situation Center report: Predicted orbit plots for IMP-J-1976

Predicted orbit plots for the IMP-J satellite were given for the time period January-December 1976. These plots are shown in three projections. The time period covered by each set of projections is 12 days and 6 hours, corresponding approximately to the period of IMP-J. The three coordinate systems used are the Geocentric Solar Ecliptic system (GSE), the Geocentric Solar Magnetospheric system (GSM), and the Solar Magnetic system (SM). For each of the three projections, time ticks and codes are given on the satellite trajectories. The codes are interpreted in the table at the base of each plot. Time is given in the table as year/day/decimal hour, and the total time covered by each plot is shown at the bottom of each table.

Source record↗

Multi-asteroid flyby trajectories using Venus-earth gravity assists

The feasibility of using Venus and earth gravity assists for delivering spacecraft to the asteroid belt with a low launch energy but with the additional flight time from earth to Venus and back to earth. A numerical investigation for this kind of trajectory reveals a wide range of possibilities. Energy gain tables and synodic and resonance interval tables are presented for the gravity-assist trajectories. Tables are presented for the first twenty asteroids on the trajectories. These gravity-assist flybys are compared to direct launch multi-asteroid flybys, illustrating the advantage of the gravity-assist type in launch energy requirements.

Bender, D. F.↗

Summary of studies for a solar optical telescope in space: 1968-1976

The primary objective of this review is to tabulate the basic recommendations of several solar telescope studies. A primary matrix, listing some of the basic optical parameters, was compiled and forms the basis for a table. From this table it is apparent that a strong consensus exists on the configuration of the telescope and on its fundamental dimensionless parameters. Other tables presented in this document address the basic approach of each study to the telescope design as well as to the design of critical subsystems. These subsystem problems include the material, coating, configuration, mounting, launch locks, and thermal control of the primary mirror, the structure of the main telescope and the instrument bay, the mechanisms for radiation rejection, thermal control, and meteoroid shielding, and methods of maintaining image quality by proper alignment and by image motion compensation.

Bremer, J.↗

Rotary leveling base platform

A leveling apparatus for the precise adjustment of a scientific instrument is reported. A base member is provided having a hollow cylindrical shape. A table for supporting the instrument rests on the base and has a shaft portion extending below the table. The upper portion of the shaft fits tightly into the hollow portion of the base member whereas the lower portion of the shaft is machined to fit loosely. The lower portion of the shaft is provided with a groove. Adjusting screws are threaded through the hollow cylindrical portion and are adapted to enter the groove. By adjusting the screws, the lower portion of the shaft is moved in a vertical plane since the shaft is loosely fitted into the cylinder. The upper portion of the shaft which is tightly fitted into the upper end of the cylinder causes the cylinder to deform slightly providing a fulcrum point which allows the table to be leveled in response to the adjustment of the adjusting screws.

Delaplaine, R. W.↗

Jig for assembling large composite panels

Layup of composite panels as large as 15 by 60 ft is greatly facilitated by simple mechanism. Jig consists of flat, detachable table, and curved laminating-plate joined by rack and pinion to insure accurate registration. Vacuum holds thin plastic film to laminating-plate. Preimpregnated composite sheet is applied to plate, which is then lowered face down onto table. Release of vacuum leaves layer and film and table. Film is peeled off, and steps are repeated for next layer of laminate.

Watts, J. T.↗

Asteroid rotation. IV

The results from the year 1979 of an ongoing program of asteroid photometry at Table Mountain Observatory are presented. The results for 53 asteroids are summarized in a table, showing the number, name, opposition date, taxonomic class, diameter, absolute magnitude, mean absolute magnitude at zero phase angle and values of the absolute magnitude and linear phase coefficient derived from it, the rotation period in hours, peak-to-peak amplitude of variation, difference between mean and maximum brightness, and reliability index. Another table presents data on aspect and comparison stars, including brightness and distance data. Reliable rotation periods are reported for 22 asteroids for which no previous values are known. For seven asteroids, periods are reported which are revisions of previously reported values.

Harris, A. W.↗

JPL pulsar timing observations. II - Geocentric arrival times

Monitoring of the behavior of naturally pulsating galactic radio sources, or pulsars, through regularly spaced measurements of pulse arrival times, has been conducted by several laboratories. A tabular presentation is here made of pulse arrival time measurements from the NASA Deep Space Network between late 1968 and early 1981. By expressing the measurements in ephemeris time, and referring them to the geocenter, usable tables of results have been generated for each pulsar listed in the first of the tables given. The considerations addressed by the tables are: (1) a necessary step in the study of pulsar dynamics is the reduction of topocentric arrival times to the barycenter of the solar system; (2) the tabulated data are accessible to all opinions as to the procedures to be used in interpreting arrival time data; and (3) different observing programs can usually be combined to produce an improvement in the total data set.

Downs, G. S.↗

Heterodyne frequency measurements and frequency calibration standards for tunable diode lasers

New frequency calibration tables are required to keep abreast of the resolution attainable by currently available tunable lasers. One key to the generation of tables with requisite accuracy involves accurate heterodyne frequency measurements; another key consists of reliable fitting and analysis. Coordinated activity in NBS involves selection of suitable molecular calibration candidates, their frequency measurement and analysis, and dissemination of the results in the form of frequency calibration tables. Current status of these efforts is described.

Wells, J. S.↗

Combustion gas properties. 2: Natural gas fuel and dry air

A series of computations has been made to produce the equilibrium temperature and gas composition for natural gas fuel and dry air. The computed tables and figures provide combustion gas property data for pressures from 0.5 to 50 atmospheres and equivalence ratios from 0 to 2.0. Only samples tables and figures are provided in this report. The complete set of tables and figures is provided on four microfiche films supplied with this report.

Wear, J. D.↗

A New CO2 Transmittance Parameterization and Its Impact on the GLA GCM

The Wu-Kaplan radiation parameterization (Krishnamurthy, 1982) used in the GLA Global Circulation Model (GCM) was improved by replacing its fixed tables of CO2 transmittance in the 15 micron band with models developed by regression on line-by-line transmittances. The transmittances between layers are modeled as products of effective sublayer transmittances. The GLA GCM was integrated for 20 days starting at OZ, January 21, 1979, using the transmittance model. In the control run the fixed table of 15 micron CO2 transmittances is used. The effect of the change of initial cooling rate is illustrated by a map of the difference of 50 mb temperature after 6 hours. The cooling is reduced over high topography, where the fixed table underestimates the transmittance, and is reduced slightly throughout the tropics and the north polar area where the stratosphere is relatively cold. Over elevated topography the surface cooling increases, also as expected. The stratospheric temperature increases over a degree in the arctic and smaller amounts over Antarctica and elsewhere. Tropospheric equilibrium temperature response is obscured by time dependent differences in synoptic disturbances.

Wobus, R.↗

Benchmark data on the separability among crops in the southern San Joaquin Valley of California

Landsat MSS data were input to a discriminant analysis of 21 crops on each of eight dates in 1979 using a total of 4,142 fields in southern Fresno County, California. The 21 crops, which together account for over 70 percent of the agricultural acreage in the southern San Joaquin Valley, were analyzed to quantify the spectral separability, defined as omission error, between all pairs of crops. On each date the fields were segregated into six groups based on the mean value of the MSS7/MSS5 ratio, which is correlated with green biomass. Discriminant analysis was run on each group on each date. The resulting contingency tables offer information that can be profitably used in conjunction with crop calendars to pick the best dates for a classification. The tables show expected percent correct classification and error rates for all the crops. The patterns in the contingency tables show that the percent correct classification for crops generally increases with the amount of greenness in the fields being classified. However, there are exceptions to this general rule, notably grain.

Morse, A.↗

Confidence limits for small numbers of events in astrophysical data

The calculation of limits for small numbers of astronomical counts is based on standard equations derived from Poisson and binomial statistics; although the equations are straightforward, their direct use is cumbersome and involves both table-interpolations and several mathematical operations. Convenient tables and approximate formulae are here presented for confidence limits which are based on such Poisson and binomial statistics. The limits in the tables are given for all confidence levels commonly used in astrophysics.

Gehrels, N.↗

Identification of a constellation from a position

A table is presented which permits rapid determination of the constellation in which an object is located from its 1875.0 position. Directions for accessing and using the table are given. The historical background to the table's development is briefly stated.

Roman, Nancy G.↗

Permanent-File-Validation Utility Computer Program

Errors in files detected and corrected during operation. Permanent File Validation (PFVAL) utility computer program provides CDC CYBER NOS sites with mechanism to verify integrity of permanent file base. Locates and identifies permanent file errors in Mass Storage Table (MST) and Track Reservation Table (TRT), in permanent file catalog entries (PFC's) in permit sectors, and in disk sector linkage. All detected errors written to listing file and system and job day files. Program operates by reading system tables , catalog track, permit sectors, and disk linkage bytes to vaidate expected and actual file linkages. Used extensively to identify and locate errors in permanent files and enable online correction, reducing computer-system downtime.

Derry, Stephen D.↗