Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solubility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Diffusion in undoped and Cr-doped amorphous UO 2

UO 2 fuel pellets are often doped with chromium oxide to obtain favourable properties such as higher density, improved thermal stability, large grain sizes, improved pellet-clad interaction margins, and increased fission gas retention during transients. Chromium has a low solubility limit in UO 2 , with past experimental work reporting solubility limits ranging between 0.004 to 0.06 wt.% Cr. Due to its low solubility, segregation of Cr ions to the grain boundary may occur. Further, the complexity of these boundaries may be high as observed in other ceramics resulting in disordered or amorphous regions along the boundary, affecting a range of material and operational properties of the fuel pellet. To assess these disordered regions, in this work we study amorphous undoped and Cr doped UO 2 systems (containing 10–50 at.% Cr 3+ ) that have been modelled using classical molecular dynamics methods incorporating Cr 3+ into the well-used CRG potential library. Diffusion coefficients, pre-exponential factors, and activation energies for diffusion were computed for oxygen ions, assessing the impact of structure and extrinsic species on migration. Oxygen diffusion was observed to be much faster in the undoped amorphous system compared to its crystalline counterpart. Oxygen diffusion in doped systems decreased with increasing Cr concentration, highlighting the importance of additives to retain fission products and other migratory species.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Local environment and composition of magnesium gallium layered double hydroxides determined from solid-state {sup 1}H and {sup 71}Ga NMR spectroscopy

Ordering of gallium(III) in a series of magnesium gallium (MgGa) layered double hydroxides (LDHs), [Mg{sub 1−x}Ga{sub x}(OH){sub 2}(NO{sub 3}){sub x}·yH{sub 2}O] was investigated using solid-state {sup 1}H and {sup 71}Ga NMR spectroscopy as well as powder X-ray diffraction. Three different proton environments from Mg{sub 3}-OH, Mg{sub 2}Ga-OH and intergallery water molecules were assigned and quantified using ({sup 1}H,{sup 71}Ga) HETCOR and {sup 1}H MAS NMR. A single {sup 71}Ga site originating from the unique Ga site in the MgGa LDH's was observed in {sup 71}Ga MAS and 3QMAS NMR spectra. Both {sup 1}H MAS NMR spectra recorded at 21.1 T (900 MHz) and elemental analysis show that the synthesized MgGa LDH's had a lower Mg:Ga ratio than that of the starting reactant solution. The origin of this is the formation of soluble [Ga(OH){sub 4}]{sup −} complexes formed during synthesis, and not due to formation of insoluble gallium (oxy)hydroxides. No sign of Ga-O-Ga connectivities or defects were detected for the MgGa LDH's. - Graphical abstract: Two types of hydroxides groups are observed in magnesium gallium layered double hydroxides revealing an ordering of Ga in the cation layer. - Highlights: • Ga is ordered in our magnesium gallium layered double hydroxides. • Ga depletion due to formation of soluble Ga complexes during synthesis. • No sign of Ga rich regions in magnesium gallium LDHs. • Solid state {sup 1}H and {sup 71}Ga give detailed insight into the structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transformations of lead 1,3-propylenediaminetetraacetate to its MOF products for the selective adsorption of methanol

Water soluble coordination polymer of potassium lead 1,3-propylenediaminetetraacetate {K_4[Pb_2(1,3-pdta)_2]·6H_2O}{sub n} (1) and its insoluble products {[Pb(1,3-H_2pdta)(H_2O)]·2H_2O}{sub n} (2), {[Pb_2(1,3-pdta)(H_2O)_4]·4H_2O}{sub n} (3) and [Pb{sub 2}(1,3-pdta)(H{sub 2}O){sub 2}]{sub n} (4) were obtained from the direct reactions of lead nitrate with 1,3-propylenediaminetetraacetic acid in different conditions (1,3-H{sub 4}pdta=1,3-propylenediaminetetraacetic acid). The former 1 could be converted to the insoluble products of {[Pb_2(1,3-pdta)(H_2O)_4]·4H_2O}{sub n} (3) and [Pb{sub 2}(1,3-pdta)(H{sub 2}O){sub 2}]{sub n} (4) in weak acidic solution. The complexes have been full characterized by EA, FT-IR, solution and solid state {sup 13}C NMR spectra, thermogravimetric and structural analyses. Interestingly, 3 contains a unique (H{sub 2}O){sub 26} cluster and a 5.2 Å pore after eliminating the guest water molecules, which exhibits reversible adsorption for methanol. This is confirmed by PXRD and solid state {sup 13}C NMR analyses. Nano-confined methanol in microporous structure has been observed based on the large downfield shift of {sup 13}C NMR signal (Δδ 9.72 ppm), attributing to the methyl group in methanol. - Graphical abstract: Water soluble coordination polymer K{sub 4n}[Pb{sub 2}(1,3-pdta){sub 2}]{sub n}·6nH{sub 2}O (1) is converted to its insoluble product [Pb{sub 2}(1,3-pdta)(H{sub 2}O){sub 4}]{sub n}·4nH{sub 2}O (3), which contains a unique (H{sub 2}O){sub 26} cluster and exhibits reversible adsorption for methanol. - Highlights: • Water-soluble coordination polymer was constructed by lead propylenediaminetetraacetate. • Its MOF product has a unique (H{sub 2}O){sub 26} cluster. • The product exhibits reversible adsorption for methanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Calcium carbonate formation on mica supported extracellular polymeric substance produced by Rhodococcus opacus

Extracellular polymeric substance (EPS) extracted from Rhodococcus opacus bacterial strain was used as a matrix for calcium carbonate precipitation using the vapour diffusion method. The total exopolymer and water-soluble exopolymer fraction of different concentrations were spread on the mica surface by the spin-coating method. The obtained layers were characterized using the atomic force microscopy measurement and XPS analysis. The effects of polymer concentration, initial pH of calcium chloride solution and precipitation time on the obtained crystals properties were investigated. Raman spectroscopy and scanning electron microscopy were used to characterize the precipitated minerals. It was found that the type of precipitated CaCO{sub 3} polymorph and the crystal size depend on the kind of EPS fraction. The obtained results indicates that the water soluble fraction favours vaterite dissolution and calcite growth, whereas the total EPS stabilizes vaterite and this effect is stronger at basic pH. It seems to be due to different contents of the functional group of EPS fractions. - Highlights: • CaCO{sub 3} crystal size and polymorph can be controlled by EPS substance obtained from R. opacus. • The water soluble fraction favours vaterite dissolution and calcite growth. • The total EPS stabilizes vaterite. • This effect is stronger at basic pH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room temperature biosynthesis of greatly stable fluorescent ZnO quantum dots for the selective detection of Cr{sup 3+} ions

Graphical abstract: Biosynthesized fluorescent ZnO quantum dots are extremely stable and are able to sense up to 2 nM of Cr3+ ions in aqueous solution. - Highlights: • ZnO quantum dotes (QDs) are rapidly synthesized from the bio waste at room temperature. • The capping and reducing agent is from natural source hence biodegradable. • The water soluble fluorescent ZnO quantum dots are highly stable. • The QDs are able to sense 2 nM of Cr{sup 3+} ions in aqueous solution. - Abstract: Synthesis of extremely stable and water soluble quantum dots (QDs) would be smart if the method is rapid and eco-friendly. Here in, we have employed a simple strategy for the preparation of well dispersed, luminescent ZnO quantum dots by using pomegranate peel extract at room temperature. This method excludes the use of strong commercial stabilizing agents, different pH conditions, higher temperature and inert atmosphere during the synthesis. The microscopic study has revealed the ZnO QDs to be of a narrow size with an average size distribution of about 4 nm. The water soluble QDs exhibited a strong emission peak at 490 nm and were stable for twelve months. The emission from ZnO QDs are selectively quenched upon addition of Cr{sup 3+} ions. The interaction between the Cr{sup 3+} and the biomolecules on the exterior of ZnO QDs, enables the system to detect up to 2 nM Cr{sup 3+} ions in aqueous solution.

36 MATERIALS SCIENCE↗

Fluoroalkyl-functional imidazoles and imidazolium–based ionic liquids prepared via thiol-ene/yne click chemistry

A fluorinated thiol was systematically investigated against a diverse set of –ene- and –yne-bearing imidazole and imidazolium substrates in the pursuit of new cation-fluorinated, omniphobic (hydrophobic and oleophobic) ionic liquids for aerospace applications. Compounds were prepared using UV-initiated click chemistry at quantitative conversion and purified with relative ease. Seven ionic liquids were synthesized and have isolated yields ranging from 74% to >99%. Five of the new cation-fluorinated ionic liquids are hydrophobic and two are liquids at room temperature. In addition to hydrophobicity, the seven ionic liquids’ solubilities were qualitatively examined across a wide spectrum of conventional organic solvents. Of note, the majority of the prepared ionic liquids are insoluble in water and hexanes yet soluble in methanol, acetone, acetonitrile, and dichloromethane. In addition to intriguing solubility properties, the ionic liquids in this study have high densities without the incorporation of heavy atoms, ranging from 1.596 to 1.924 g cm –3 . The fluorinated salts also show good short-term thermal stability in air, with decomposition temperatures ranging from 215 °C to 320 °C. Other relevant characterization methods include spectroscopy, thermal analysis, and physical property measurements where appropriate. The X-ray crystal structure of a divalent, cation-fluorinated ionic liquid from this study was also obtained and shows unique fluorous domains in the extended structure, providing valuable insight into the materials’ physical properties. Furthermore, this work highlights a family of compounds moving towards omniphobic ionic liquids yielding potential possibilities for future applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sequential Extraction and Spectroscopic Characterisation of Organic Matter from the Callovo-Oxfordian Formation

One site under consideration for the disposal of medium and high level, long lived radioactive waste is in the eastern part of the Paris Basin (Meuse/Haute Marne, France), where the National Radioactive Waste Management Agency (ANDRA) operates an underground laboratory. The sedimentary host formation is a 130 m thick, clay-rich Callovo-Oxfordian deposit ca. 350-550 m below ground in the selected area. The major fraction (>95%) of the organic matter (OM) is associated with minerals. In order to better understand the importance of OM on the chemistry of this formation, we have developed a protocol allowing extraction/fractionation of organic compounds in the rocks. The protocol is based on classical methods currently used for the isolation of humic substances from soils and for the separation of kerogen in ancient sediments using sequential extraction with solvents and water at different pH value. This allows us to the remove a large part of the minerals and to suspend almost all (>90%) of the OM (associated with residual recalcitrant minerals) in water. The OM can then be analysed via spectroscopic methods, such as mass spectrometry (MS), Fourier transform infra-red spectroscopy (FTIR), or C (1s) near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The molecular composition of the solvent-soluble, directly-extractable part shows the OM to be thermally immature. The solvent-soluble fractions obtained after acid and alkaline treatments are mostly polar in nature and have a high degree of aliphaticity. C(1s) NEXAFS analysis of water soluble organic fractions indicates a progressive increase in aliphaticity and a decrease in carboxylic/carbonyl groups with consecutive extraction steps.

04 OIL SHALES AND TAR SANDS↗

Expression of blue pigment synthetase a from Streptomyces lavenduale reveals insights on the effects of refactoring biosynthetic megasynthases for heterologous expression in Escherichia coli .

High GC bacteria from the genus Streptomyces harbor expansive secondary metabolism. The expression of biosynthetic proteins and the characterization and identification of biological "parts" for synthetic biology purposes from such pathways are of interest. However, the high GC content of proteins from actinomycetes in addition to the large size and multi-domain architecture of many biosynthetic proteins (such as non-ribosomal peptide synthetases; NRPSs, and polyketide synthases; PKSs often called "megasynthases") often presents issues with full-length translation and folding. Here we evaluate a non-ribosomal peptide synthetase (NRPS) from Streptomyces lavenduale, a multidomain "megasynthase" gene that comes from a high GC (72.5%) genome. While a preliminary step in revealing differences, to our knowledge this presents the first head-to-head comparison of codon-optimized sequences versus a native sequence of proteins of streptomycete origin heterologously expressed in E. coli. We found that any disruption in co-translational folding from codon mismatch that reduces the titer of indigoidine is explainable via the formation of more inclusion bodies as opposed to compromising folding or posttranslational modification in the soluble fraction. In conclusion, this result supports that one could apply any refactoring strategies that improve soluble expression in E. coli without concern that the protein that reaches the soluble fraction is differentially folded.

59 BASIC BIOLOGICAL SCIENCES↗

Microbial community response and SDS-PAGE reveal possible mechanism of waste activated sludge acidification enhanced by microaeration coupled thermophilic pretreatment

Aiming to strengthen the performance of waste activated sludge digestion, pretreatment is a prerequisite for keeping operations within an industrially acceptable time- frame. The performance of microaeration coupled with thermophilic (MT) pretreatment on waste activated sludge solubilization and acidification was investigated. The results showed that the maximum soluble organics concentrations, including soluble proteins and carbohydrates, reached 2290 mg COD/L in 24 h when the ventilation rate and temperature were 0.05 vvm and 70 °C. SDS-polyacrylamide gel electrophoresis (SDS-PAGE) test on pure-culture (E.coli) and scanning electron microscopy analysis indicated that MT pretreatment effectively destroyed microbial cell wall and resulted in an increase in soluble proteins. Polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) analysis revealed that MT pretreatment reduced the diversity of the bacterial community during pretreatment. Along with the dissolution of a large quantity of organic matter, microbial species such as Lactococcus and Methyloversatilis bloomed at the end of acidification period, which contributed to SCFAs production. Finally, this study revealed that MT pretreatment facilitated the WAS hydrolysis efficiency and enhanced SCFAs (3149 mg COD/L with fermentation for 96 h) production, especially for acetic acid (50%) accumulation, which provides a new perspective for the application and recovery of sludge resources.

59 BASIC BIOLOGICAL SCIENCES↗

Solid solutions limited by grain-boundary solute clustering in ultrafine-grained alloys

Immiscible Ag-Cu alloys exhibit complex behavior due to varying Cu solid solubilities reported under equilibrium and metastable conditions. In ultrafine-grained alloys, these limits are further complicated by a high fraction of grain boundaries, where solute atoms tend to segregate and, in some cases, form clusters. Here, this study investigates the influence of Cu solute segregation and clustering on solid-solution limits in ultrafine-grained Ag-Cu alloys synthesized by magnetron sputtering with varying Cu content. X-ray diffraction peak shifts reveal a solid-solution concentration plateau for Cu contents from 4.9 to 11.7 at %, in contrast to the peak shifts predicted by density-functional theory for Ag-Cu alloys. Scanning transmission electron microscopy further reveals limited solid solubility and the formation of numerous Cu-rich clusters at grain boundaries. Atomistic simulations demonstrate that such limited solubility does not arise from grain boundary segregation alone, but only when strong solute-solute interactions promote the formation of grain-boundary Cu solute clusters.

Density-functional theory↗

Mixtures of CO 2 and poly(fluoroacrylate) based on monomers containing only six or four fluorinated carbons: Phase behavior and solution viscosity

In this study, homopolymerization of fluoroacrylate monomers containing a segment with eight fluorinated carbons, (CH 2 CHCOO(CH 2 ) 2 (CF 2 ) 7 CF 3 ), yield poly(fluoroacrylate) (PFA) with remarkably high solubility in CO 2 , but the corresponding ultimate PFA degradation product perfluorooctanoic acid (PFOA) is bio-accumulative. Based on cloud point loci in the 1–4 wt% PFA in CO 2 concentration range at temperatures of 25, 50, 75, 100 and 125°C, it is shown that C 6 F 13 -based and C 4 F 9 -based PFA, with relatively benign degradation products perfluorohexanoic acid (PFHxA) and perfluorobutanoic acid (PFBA), respectively, retain the same level of CO 2 -solubility as that of C 8 F 17 -based PFA. Further, both C 6 F 13 -based and C 4 F 9 -based PFA can increase the viscosity of single-phase CO 2 -PFA solutions (i.e. thicken CO 2 ) as much as C 8 F 17 -based PFA in the 25–125°C range. Therefore, the design of CO 2 -soluble PFA need not be constrained to monomers containing the C 8 F 17 moiety; fluoroacrylate monomers containing shorter fluoroalkyl segments with only four or six fluorocarbons can be utilized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hexavalent chromium is cytotoxic and genotoxic to hawksbill sea turtle cells

Sea turtles are a charismatic and ancient ocean species and can serve as key indicators for ocean ecosystems, including coral reefs and sea grass beds as well as coastal beaches. Genotoxicity studies in the species are absent, limiting our understanding of the impact of environmental toxicants on sea turtles. Hexavalent chromium (Cr(VI)) is a ubiquitous environmental problem worldwide, and recent studies show it is a global marine pollutant of concern. Thus, we evaluated the cytotoxicity and genotoxicity of soluble and particulate Cr(VI) in hawksbill sea turtle cells. Particulate Cr(VI) was both cytotoxic and genotoxic to sea turtle cells. Concentrations of 0.1, 0.5, 1, and 5 μg/cm{sup 2} lead chromate induced 108, 79, 54, and 7% relative survival, respectively. Additionally, concentrations of 0, 0.1, 0.5, 1, and 5 μg/cm{sup 2} lead chromate induced damage in 4, 10, 15, 26, and 36% of cells and caused 4, 11, 17, 30, and 56 chromosome aberrations in 100 metaphases, respectively. For soluble Cr, concentrations of 0.25, 0.5, 1, 2.5, and 5 μM sodium chromate induced 84, 69, 46, 25, and 3% relative survival, respectively. Sodium chromate induced 3, 9, 9, 14, 21, and 29% of metaphases with damage, and caused 3, 10, 10, 16, 26, and 39 damaged chromosomes in 100 metaphases at concentrations of 0, 0.25, 0.5, 1, 2.5, and 5 μM sodium chromate, respectively. These data suggest that Cr(VI) may be a concern for hawksbill sea turtles and sea turtles in general. - Highlights: • Particulate Cr(VI) is cytotoxic and clastogenic to hawksbill sea turtle cells. • Soluble Cr(VI) is cytotoxic and clastogenic to hawksbill sea turtle cells. • Cr(VI) may be a risk factor for hawksbill sea turtle health.

60 APPLIED LIFE SCIENCES↗

A first-principles based description of the Hf-Ni system supported by high-temperature synchrotron experiments

Hf-Ni is an important binary system for high temperature alloys and shape memory alloys which has been investigated several times in the literature but often using samples of Hf contaminated by Zr. The thermodynamics of this system are remodeled in this work based on first-principles calculations and additional experiments using Hf with relatively low Zr contamination (0.25 wt. %). Diffusion couples in the Ni-rich portion of the Hf-Ni system heat treated at 1173, 1273 and 1373 K are used to measure phase stability and Hf solubility in the fcc phase. The solubility observed in fcc Ni from Ni/Ni 50 Hf 50 (at.%) diffusion couples is larger than that observed in previous experiments. These results are the only source fit to during modeling of the fcc solubility to mitigate effects from Zr contamination. Data in the literature suggests that the high temperature crystal structure of the B33 NiHf phase is, in fact, the B2 structure. High temperature synchrotron measurements provide confirmation of this crystal structure. Modeling of the B2 phase was aided by first-principles calculations using special quasi-random structures (SQS). Finally, the present CALPHAD model will prove useful when designing shape memory alloys containing Hf and when modeling the Hf activity in Ni-base high temperature alloys.

36 MATERIALS SCIENCE↗

An investigation of ultrasound effect on digestate solubilization and methane yield

Highlights: • Ultrasonication effect on digestate solubilization was investigated. • Ultrasonication of digestate resulted in increased levels of material release. • 1.6–2.3-fold increase in net CH{sub 4} production was achieved at 0.05–0.21 kW h/L. • Preliminary analysis revealed that energetics of the system was unfavorable. • Only 11% at 0.05 kW h/L and 4% at 0.21 kW h/L of energy input were recovered. - Abstract: In this study, different ultrasound power intensities of 0.05–0.21 kW/L (4.13–16.52 kW h/kg TS) were applied at a frequency of 20 kHz and for durations of 5–20 min to digestate obtained from a domestic wastewater treatment plant. The ultrasonic effect on digestate solubilization was revealed by increased levels of soluble Chemical Oxygen Demand (sCOD), soluble Total Organic Carbon (sTOC), and soluble Total Nitrogen (sTN) released into the solution. The highest material release was achieved at an ultrasonic energy intensity of 0.21 kW h/L. Furthermore, the ultrasonic effect on CH{sub 4} production was studied using the anaerobic digestion process. The application of ultrasound at 0.05–0.21 kW h/L provided 1.6–2.3-fold increase in net CH{sub 4} production. Analysis of the energetics of the system showed that only about 4 and 11% of the energy input was recovered in terms of additional CH{sub 4} production at 0.21 and 0.05 kW h/L, respectively. A comprehensive cost-benefit analysis of the system is required for making a conclusion on the feasibility of the system, and such analysis should include environmental, economic, and societal benefits of the system, among others.

54 ENVIRONMENTAL SCIENCES↗

Proliferation and motility of HaCaT keratinocyte derivatives is enhanced by fibroblast nemosis

The role of paracrine tumor-stroma regulation in the progression of cancer is under intense investigation. Activated fibroblasts are key components of the tumor microenvironment providing the soluble factors mediating the regulation. Nemosis is an experimental model to study these parameters: formation of a multicellular spheroid activates fibroblasts and leads to increased production of soluble factors involved in the promotion of growth and motility. Role of nemosis was investigated in the tumorigenesis of HaCaT derivatives representing skin carcinoma progression. Conditioned medium from fibroblast spheroids increased proliferation rate of HaCaT derivatives. Expression of proliferation marker Ki-67 increased significantly in benign A5 and low-grade malignant II-4 cells, but did not further increase in the metastatic RT3 cells. Expression of p63, keratinocyte stem cell marker linked to cancer progression, was augmented by medium from nemotic fibroblasts; this increase was also seen in RT3 cells. Scratch-wound healing of the keratinocytes was enhanced in response to fibroblast nemosis. Neutralizing antibodies against growth factors inhibited wound healing to some extent; the response varied between benign and malignant keratinocytes. Migration and invasion were enhanced by conditioned medium from nemotic fibroblasts in benign and low-grade malignant cells. RT3 keratinocyte migration was further augmented, but invasion was not, indicating their intrinsic capacity to invade. Our data demonstrate that fibroblast nemosis increases proliferation and motility of HaCaT keratinocyte derivatives, and thus nemosis can be used as a model to study the role of soluble factors secreted by fibroblasts in tumor progression.

60 APPLIED LIFE SCIENCES↗

Carcinoembryonic antigen promotes colorectal cancer progression by targeting adherens junction complexes

Oncomarkers play important roles in the detection and management of human malignancies. Carcinoembryonic antigen (CEA, CEACAM5) and epithelial cadherin (E-cadherin) are considered as independent tumor markers in monitoring metastatic colorectal cancer. They are both expressed by cancer cells and can be detected in the blood serum. We investigated the effect of CEA production by MIP101 colorectal carcinoma cell lines on E-cadherin adherens junction (AJ) protein complexes. No direct interaction between E-cadherin and CEA was detected; however, the functional relationships between E-cadherin and its AJ partners: α-, β- and p120 catenins were impaired. We discovered a novel interaction between CEA and beta-catenin protein in the CEA producing cells. It is shown in the current study that CEA overexpression alters the splicing of p120 catenin and triggers the release of soluble E-cadherin. The influence of CEA production by colorectal cancer cells on the function of E-cadherin junction complexes may explain the link between the elevated levels of CEA and the increase in soluble E-cadherin during the progression of colorectal cancer. - Highlights: • Elevated level of CEA increases the release of soluble E-cadherin during the progression of colorectal cancer. • CEA over-expression alters the binding preferences between E-cadherin and its partners: α-, β- and p120 catenins in adherens junction complexes. • CEA produced by colorectal cancer cells interacts with beta-catenin protein. • CEA over-expression triggers the increase in nuclear beta-catenin. • CEA over-expression alters the splicing of p120 catenin protein.

60 APPLIED LIFE SCIENCES↗

Novel method for effectively amplifying human peripheral blood T cells in vitro

The use of chimeric antigen receptor-modified T cells (CAR T cells) is an effective therapy for advanced cancer, especially hematological malignancies, and this method has attracted widespread attention in the last several years. The type, number and vitality of the effector cells clearly play important roles in this approach. In this study, to expand the possibility of curing cancer through adoptive cell therapy (ACT), we developed a novel method for effectively obtaining abundant T cells in vitro. The fusion proteins of three cytokines, SA-hIL-2, SA-hIL-7 and SA-hIL-21, were anchored onto biotin magnetic beads to increase the number of cytokines on the surface of the magnetic beads, which increased the local concentration of cytokines and thus promoted the binding of cytokines to T cells. Next, we examined the effects of these modified magnetic beads on the proliferation rate of T cells and CD19 CAR T cells. In this study, we report the expression and purification of the active bifunctional fusion proteins SA-hIL-2, SA-hIL-7 and SA-hIL-21, which were bound to biotin magnetic beads to develop a platform that was employed to increase the local concentration of cytokines. When the cells had been cultured for 14 days, the proliferation rate of the CD3{sup +} T cells in the group that received cytokine-coupled biotin magnetic beads (Beads-SA-CK) was higher than that of the cells in the groups that received soluble cytokines (Soluble-SA-CK) and that of the cells in the standard group (Standard-CK). We speculate that this difference may be the result of the increased expression of Bcl-2 and the increased phosphorylation of Stat5. Moreover, our results preliminarily indicate that compared with the other two treatments, Soluble-SA-CK and Standard-CK, adding cytokine-coupled biotin magnetic beads more effectively increases the proliferation rate of CD19 CAR-T cells. As expected, the CD19 CAR-T cells stimulated by Beads-SA-CK had a stronger anticancer effect than the cells stimulated by the other two treatments. An effective method of preparing abundant T cells in vitro was developed, and it may provide a novel strategy for ACT.

60 APPLIED LIFE SCIENCES↗

Conjugation of Amphiphilic Proteins to Hydrophobic Ligands in Organic Solvent

Protein–ligand conjugations are usually carried out in aqueous media in order to mimic the environment within which the conjugates will be used. Here, we focus on the conjugation of amphiphilic variants of elastin-like polypeptide (ELP), short elastin (sEL), to poorly water-soluble compounds like OPPVs (p-phenylenevinylene oligomers), triarylamines, and polypyridine-metal complexes. These conjugations are problematic when carried out in aqueous phase because hydrophobic ligands tend to avoid exposure to water, which in turn causes the ligand to self-aggregate and/or interact noncovalently with hydrophobic regions of the amphiphile. Ultimately, this behavior leads to low conjugation efficiency and contamination with strong noncovalent “conjugates”. After exploring the solubility of sEL in various organic solvents, we have established an efficient conjugation methodology for obtaining covalent conjugates virtually free of contaminating noncovalent complexes. When conjugating carboxylated ligands to the amphiphile amines, we demonstrate that even when only one amine (the N-terminus) is present, its derivatization is 98% efficient. When conjugating amine moieties to the amphiphile carboxyls (a problematic configuration), protein multimerization is avoided, 98–100% of the protein is conjugated, and the unreacted ligand is recovered in pure form. Our syntheses occur in “one pot”, and our purification procedure is a simple workup utilizing a combination of water and organic solvent extractions. This conjugation methodology might provide a solution to problems arising from solubility mismatch of protein and ligand, and it is likely to be widely applied for modification of recombinant amphiphiles used for drug delivery (PEG-antibodies, polymer-enzymes, food proteins), cell adhesion (collagen, hydrophobins), synthesis of nanostructures (peptides), and engineering of biocompatible optoelectronics (biological polymers), to cite a few.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗