Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shorting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Development of a deep learning based automated data analysis for step-filter x-ray spectrometers in support of high-repetition rate short-pulse laser-driven acceleration experiments

We present a deep learning based framework for real-time analysis of a differential filter based x-ray spectrometer that is common on short-pulse laser experiments. The analysis framework was trained with a large repository of synthetic data to retrieve key experimental metrics, such as slope temperature. With traditional analysis methods, these quantities would have to be extracted from data using a time-intensive and manual analysis. Furthermore, this framework was developed for a specific diagnostic, but may be applicable to a wide variety of diagnostics common to laser experiments and thus will be especially crucial to the development of high-repetition rate (HRR) diagnostics for HRR laser systems that are coming online.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dual-energy fast neutron imaging using tunable short-pulse laser-driven sources

Here a novel dual-energy fast neutron imaging technique is presented using short-pulse laser-driven neutron sources to leverage their inherent adaptive spectral control to enable 3D volume segmentation and reconstruction. Laser-accelerated ion beams incident onto secondary targets create directional, broadband, MeV-class neutrons. Synthetic radiographs are produced of multi-material objects using ion and neutron spectra derived from analytic and numerical models. It is demonstrated that neutron images generated from small changes to the neutron spectra, controlled by altering the initial laser conditions, are sufficient to isolate materials with differing attenuation coefficients. This is first demonstrated using a simplistic combinatorial isolation method and then by employing more advanced reconstruction algorithms to reduce artifacts and generate a segmentation volume of the constituent materials.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Unidirectional microwave transduction with chirality selected short-wavelength magnon excitations

Nonreciprocal magnon propagation has recently become a highly potential approach of developing chip-embedded microwave isolators for advanced information processing. However, it is challenging to achieve large nonreciprocity in miniaturized magnetic thin-film devices because of the difficulty of distinguishing propagating surface spin waves along the opposite directions when the film thickness is small. In this work, we experimentally realize unidirectional microwave transduction with sub-micrometer-wavelength propagating magnons in a yttrium iron garnet (YIG) thin-film delay line. We achieve a non-decaying isolation of 30 dB with a broad field-tunable bandpass frequency range up to 14 GHz. The large isolation is due to the selection of chiral magnetostatic surface spin waves with the Oersted field generated from the coplanar waveguide antenna. Increasing the geometry ratio between the antenna width and YIG thickness drastically reduces the nonreciprocity and introduces additional magnon transmission bands. Furthermore, our results pave the way for on-chip microwave isolation and tunable delay line with short-wavelength magnonic excitations.

36 MATERIALS SCIENCE↗

Characterization of electromigration-induced short-range stress development in Al(0.25 at. % Cu) conductor line

Scanning x-ray microbeam topography and fluorescence experiments were conducted in situ to study the electromigration behavior of a 0.5 μm thick, 10 μm wide, and 200 μm long Al(0.25 at. % Cu) conductor line with 1.5 μm-thick SiO2 passivation on a single crystal Si substrate. The strain sensitivity of x-ray topography measurement allowed detailed examination of the electromigration-induced stress distribution and evolution in the conductor line in response to the depletion of Cu solute early in the electromigration process. Upon electromigration at 0.4 MA/cm2 and 303 °C, a short-range stress gradient was quickly induced by Al migration in the Cu-depleted cathode region to counteract further Al flow. The stress gradient was fully developed during the 5.3 h incubation time, extending over the critical Blech length of about 66 μm from the cathode end. Plastic deformation then occurred at the downstream end of the Cu-depleted region. The preferential electromigration of Cu did not cause detectable stress change outside the Cu-depleted region, except for the significant stress development from the Al2Cu precipitation at the anode end which appeared to initiate the fracture in the passivation. Preliminary finite difference modeling was undertaken to simulate the experimental observations, from which important parameters dictating electromigration in Al(Cu) line were extracted: an apparent effective valence of −5.6 and −1.9 for Cu and Al in Al(Cu), respectively, and a critical Cu concentration of 0.16 at. % above which Al grain boundary diffusion is effectively blocked.

Physics↗

Radiation transfer in the spectra of short-pulse laser-heated targets

The conditions in laser-produced plasmas are frequently determined with x-ray spectroscopy by comparing calculated to measured spectra. Line spectra from K-shell transitions of low- to mid-atomic number elements are most often used since the important physical processes are well understood and reliable spectra can be readily measured and calculated. Radiation transfer effects due to large optical depths of strong lines can influence the spectra. In this work, the effects of radiation transfer on the emission spectra of short-laser pulse-heated targets are studied. The possible errors made in inferring electron temperature by not including radiation transfer are quantified. The inclusion of radiative transfer in spectral calculations improves the accuracy of typical temperature diagnostics and allows the use of strong lines for diagnostics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of the upgraded single-line-of-sight time-resolved x-ray imager using short-pulse visible and UV lasers

The single-line-of-sight time-resolved x-ray imager (SLOS-TRXI), a fast-gated x-ray imager used for capturing x-ray self-emission in inertial confinement fusion experiments on OMEGA, has been upgraded and characterized. SLOS-TRXI combines an electron-dilation imager and a hybrid complementary metal–oxide–semiconductor (hCMOS) sensor to capture multiple gated frames on a single line of sight with a temporal resolution of ~40 ps and a spatial resolution of 10 µm. The original hCMOS sensor with four frames was replaced with a newer-generation hCMOS sensor having eight frames. Gate characterizations of both the sensor and the entire SLOS-TRXI diagnostic were performed using ~10-ps FWHM visible (2ω) and UV (4ω) short-pulse lasers, respectively. A stepped echelon was used to generate a train of five UV laser pulses having an interpulse separation of 30 ± 3 ps. Characterization results of the hCMOS gating (2.28 ± 0.02-ns FWHM on average) and a temporal resolution of the upgraded SLOS-TRXI (34 ± 4-ps FWHM on average) are presented. A temporal magnification for the electron-dilation imager between 40 and 60 was inferred from the characterization results. Furthermore, the spatial resolution of the upgraded SLOS-TRXI remains the same in light of this work.

47 OTHER INSTRUMENTATION↗

Improved internal short circuit models for thermal runaway simulations in lithium-ion batteries

Thermal runaway (TR) modeling is one of the primary tools that can be used to overcome challenges associated with lithium-ion battery (LIB) safety. Among all LIB accidents that have occurred over the past decade, Internal Short Circuit (ISC) remains the most common trigger mechanism. Many available models in the literature either use a simplified approach to simulate ISC or completely ignore its contribution. The aim of this study is to understand the nature of the heat released for different types of ISC scenarios, including aluminum-anode, anode–cathode, and copper-cathode ISC. We study ISC behavior using a coupled electrochemical–thermal model with an integrated TR chemical kinetics solver built in the COMSOL Multiphysics framework. The time duration of heat release and the magnitude of the peak ISC current are studied as functions of parameters such as the size of the penetrating filament and the capacity of the cell. The numerical results are used to build an empirical model validated against the published experimental TR propagation data. Our model can be successfully used as a viable low-cost substitute in lower order (lumped) TR simulations to enable TR prevention and mitigation.

Singh, Bakhshish Preet (ORCID:0000000264751992)↗

Short-range order and longer-range disorder revealed in germanium–tin alloy thin films by extended x-ray absorption fine structure analysis

Short-range order (SRO) in semiconductor alloys, a relatively under-studied structural phenomenon in which local atomic arrangements differ from those of a random solid solution, is investigated in molecular beam epitaxy (MBE)-grown GeSn thin films. A novel preparation technique is used to pattern these films into microscale ribbons that are released from the substrate for extended x-ray absorption fine structure (EXAFS) analysis. The results indicate a strong SRO in which the first shell around Sn atoms is greatly denuded of Sn atoms relative to the nominal atomic composition of the alloy. This effect is more pronounced than that observed recently in GeSn nanowires grown by chemical vapor deposition. Additionally, the presence of a longer-range disorder detected by EXAFS analysis in the shells of atoms more distant from the absorbers is indicative of the defects and inhomogeneous strain present in the MBE-grown films. The evident existence of the SRO in GeSn alloys deposited by different growth methods and in different strain states suggests that SRO is a general phenomenon in the thin films of this metastable solid solution.

74 ATOMIC AND MOLECULAR PHYSICS↗

Kinetics of short-range order formation in GeSn alloy: MBE vs CVD

Recently, short-range order (SRO) has attracted significant attention, challenging the conventional view of the atomic positions in alloys being random. Furthermore, the presence of SRO has been predicted to have profound effects on the electronic and topological properties of group-IV alloys, offering a different direction in designing group-IV materials for photoelectronic and quantum devices. However, due to the limited understanding of the formation mechanisms, developing effective methods to manipulate SRO in epitaxy is still challenging. To address this, we propose a mechanism for the GeSn alloy, revealing that surface diffusion plays a key role in SRO formation. Building on this mechanism, we show that the distinct surface conditions in MBE and CVD lead to the formation of SRO with enhanced Sn–Sn pairing in MBE-grown samples, while CVD-grown samples remain random alloys. Furthermore, our findings provide an initial understanding of the kinetic process of SRO formation, providing guidance for the design of experiments to manipulate SRO.

Alloys↗

A platform to measure isentropes from proton-heated warm dense matter on short pulse laser facilities

We describe the development of an experimental platform that measures the release isentrope of materials heated isochorically to temperatures of a few electron volts, using short-pulse laser-produced protons to heat the sample and long-pulse laser-produced x rays to perform streaked x-ray radiography. The density profiles derived from the radiography data are integrated to generate pressure–density isentropes, independent of prior knowledge of the equation of state of the sample material. In order to understand the sensitivities of isentrope extraction from radiography data, we analyze synthetic radiographs generated by a radiation hydrodynamics code. Noise reduction and high spatial resolution are critical for isentrope reconstruction, as demonstrated by the analysis of a proof-of-principle shot day on the OMEGA-EP facility. In conclusion, the data demonstrate the feasibility of the platform for characterizing isentropes, and we discuss the necessary improvements to enhance precision in differentiating between equation-of-state models.

Equations of state↗

Study of diffraction-coupled lasing in a set of lasers with self-pumped phase-conjugate mirrors on gain gratings in the case of short-range coupling

Compact schemes of a multichannel holographic laser system with short-range coupling and increased efficiency of single-mode lasing are developed for low-gain laser media operating not only at the fundamental laser transition but also at other laser transitions of the Nd:YAG crystal. The numerical simulation shows that the maximum possible number of laser channels can be increased by equalising their parameters. The possibility of phase locking of two loop Nd:YAG lasers without a nonreciprocal element with the free-running single-mode lasing efficiency up to 0.64% and the contrast of the interference pattern of the output beams exceeding 0.5 is shown experimentally. (control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low-threshold short-cavity diode laser for a miniature atomic clock

Short-cavity diode lasers (SCDLs) emitting at the 894-nm D{sub 1} line of caesium are developed. Low threshold currents and power consumption will make it possible to use these lasers in chip-size atomic clocks (CSACs) and magnetometers. The SCDL parameters are comparable with the parameters of surface-emitting lasers. (lasers)

74 ATOMIC AND MOLECULAR PHYSICS↗

Point-like pulse-periodic UV radiation source with a short pulse duration

The radiation of discharge plasma was investigated in the nanosecond breakdown of short interelectrode gaps in a nonuniform electric field. Voltage pulses with an incident wave amplitude of {approx}10 kV, a FWHM duration of {approx}1 ns, and a rise time of {approx}200 ps were used. X-ray radiation from the discharge gap was recorded for an interelectrode gap of 0.5 mm, which confirms the generation of runaway electrons in the discharge formation. In the pulse-periodic air breakdown of a 0.5-mm wide gap at atmospheric pressure, the lines of electrode materials and the continuum were shown to make the main contribution to the plasma emission; the highest radiation intensity fell on the 200 - 300 nm region, which accounted for {approx}40% of the total emission energy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical investigation of short-pulse laser radiation propagation in a turbulent atmosphere

An algorithm is presented for the numerical simulation of short-pulse optical radiation propagation in a turbulent atmosphere on the basis of the solution to the parabolic wave equation for the complex spectral amplitude of the wave field by the split-step method. We present examples of the use of this algorithm for simulating the propagation of a pulsed coherent spatially limited beam and a plane wave. It is shown that in the regime of strong optical turbulence the relative variance of fluctuations of energy density of femtosecond radiation becomes much smaller than the relative variance of the intensity of cw radiation. (laser radiation scattering)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Control of the photoelectron dynamics for the effective conversion of short-pulse, frequency-modulated optical radiation into X-ray radiation

We report a theoretical investigation of high-order harmonic generation (HHG) in the ionisation of atoms by nonlinear frequency-modulated laser pulses of short duration. It is shown that the reduction in the instantaneous value of the laser pulse frequency can lead to a significant increase in the width of the plateau in the HHG spectrum. We have found optimal parameters of frequency modulation at which photons with energies of 1 keV are efficiently generated at a relatively low laser-pulse intensity. High HHG efficiency at optimal parameters is explained by the peculiarities of atomic ionisation dynamics and acceleration of photoelectrons by a frequency-modulated laser field. (extreme light fields and their applications)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Generation of ultra-short THz pulses in new optical nonlinear materials based on organic polymers

Using the method of optical rectification of femtosecond laser pulses, we report the generation of short (a few field cycles) terahertz pulses in the samples of films based on polyimides with covalently bound chromophore molecules of DR type. The spectral width of the produced pulses is limited by the pump pulse duration. The quadratic nonlinear optical properties are imparted to the films in the process of their fabrication by orienting the chromophore molecules in the external electric field of the applied electrodes having an original configuration. The samples are compared with the ZnTe crystal. Using the methods of coherent spectroscopy, their transmission and refractive index dispersion spectra are investigated in the frequency range 0.5 – 2.6 THz. The studied polymer composition is promising for the application in coherent spectrometers both for increasing the working spectral range without dips and for improving the spatial resolution in the near-field terahertz spectroscopy. (nonlinear optical phenomena)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Improvement of hot-electron and gamma-ray yields by selecting preplasma thickness for a target irradiated by a short laser pulse

The dependences of the temperature and the number of hot electrons on the size of the plasma corona of a thin foil target irradiated by a short relativistically intense laser pulse are investigated by three-dimensional numerical simulations. For a 30-fs long laser pulse with an energy of 300 mJ we have determined the optimal preplasma size which maximises the yield of forward-accelerated electrons capable of generating gamma-ray photons several MeV in energy. A study is made of gamma-ray generation by such laser-accelerated electrons in the bombardment of a converter target placed behind the laser target; the brightness of this gamma-ray source is shown to range up to 10{sup 15} photons s{sup −1} mrad{sup −2} mm{sup −2} × (0.1 % BW){sup −1}. (paper)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗