Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Scanning Electron Microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Tribological Behavior of a Cr{sub 2}O{sub 3} Ceramic Coating/Steel Couple Under Dry Sliding and Heavy Loading Conditions

This work evaluates the effects of heavy loadings on a Cr{sub 2}O{sub 3} ceramic coating/steel couple under dry sliding and in conditions similar to those occurring in heavy-duty diesel engines. Two types of wear tests were performed by a standard pin-on-disc tribometer under high constant and variable loads. Before wear tests, microstructure and mechanical properties of coating and steel were determined by optical emission spectrometry, optical microscopy, roughness, microhardness and x-ray diffractometry (XRD). The friction coefficient was directly calculated by the tribometer. The wear rate of Cr{sub 2}O{sub 3} ceramic coating was evaluated by the wear volume and that of pins by weighing them before and after tests. The wear tracks on pins and coating surfaces were analyzed by XRD and by scanning electron microscopy with energy-dispersive spectroscopy. For all loads except the lowest constant one, the results indicated high friction and wear involving material removal from the coating surface, through a severe-oxidational wear associated with extensive cracking of the surface of the coating, softening of the carburizing steel and removal of the carburized layer of pins. The wear mechanism was mild-oxidational under the lowest constant load, which was therefore suggested as the limit for acceptable performance of the sliding couple under study.

36 MATERIALS SCIENCE↗

Microstructures and photocatalytic properties of Ag{sup +} and La{sup 3+} surface codoped TiO{sub 2} films prepared by sol-gel method

Ag{sup +} and La{sup 3+} surface codoped TiO{sub 2} films were successfully prepared by the improved sol-gel and doping processes. The as-prepared specimens were characterized using differential thermal analysis-thermogravimetry (DTA-TG), X-ray diffraction (XRD), high-resolution field emission scanning electron microscopy (FE-SEM), X-ray energy dispersive spectroscopy (EDS), Brunauer-Emmett-Teller (BET) surface area, Photoluminescence spectrum (PL) and UV-vis diffuse reflectance spectroscopy. The photocatalytic activities of the films were evaluated by degradation of an organic dye in aqueous solution. The results of XRD, FE-SEM and BET analyses indicated that the TiO{sub 2} films were composed of nano-particles or aggregates with a size of less than 10 nm. With the codoping of Ag{sup +} and La{sup 3+}, TiO{sub 2} films with high photocatalytic activity and clearly responsive to the visible light were obtained. The improvement mechanism by ions doping was also discussed. - Graphical Abstract: The PL intensity of Ag{sup +} and La{sup 3+} surface codoped TiO{sub 2} was the lowest among all samples, indicating the recombination of electron and hole was effectively prohibited compared with pure TiO{sub 2}, Ag{sup +} and La{sup 3+} bulk codoped TiO{sub 2}. Highlights: > Ag{sup +} and La{sup 3+} codoping can reduce the crystal size of TiO{sub 2}. > Ag{sup +} and La{sup 3+} surface codoped TiO{sub 2} films have an obvious optical response red-shift. > Ag{sup +} and La{sup 3+} surface codoped TiO{sub 2} films can exhibit excellent photocatalytic activity under both UV and visible light irradiations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Contact-free reversible switching of improper ferroelectric domains by electron and ion irradiation

Focused ion beam (FIB) and scanning electron microscopy (SEM) are used to reversibly switch improper ferroelectric domains in the hexagonal manganite ErMnO 3 . Surface charging is achieved by local ion (positive charging) and electron (positive and negative charging) irradiation, which allows controlled polarization switching without the need for electrical contacts. Polarization cycling reveals that the domain walls tend to return to the equilibrium configuration obtained in the as-grown state. The response of sub-surface domains is studied by FIB cross-sectioning, enabling imaging in the direction perpendicular to the applied electric field. The results clarify how the polarization reversal in hexagonal manganites progresses at the level of domains, resolving both domain wall movements and the nucleation and growth of new domains. Our FIB-SEM based switching approach is applicable to all ferroelectrics where a sufficiently large electric field can be built up via surface charging, facilitating contact-free high-resolution studies of the domain and domain wall response to electric fields in 3D.

36 MATERIALS SCIENCE↗

Systematic investigation of sustained laser-induced incandescence in carbon nanotubes

A focused laser beam irradiating on aligned carbon nanotubes (CNTs) in moderate vacuum results in bright and sustained laser-induced incandescence (LII) in CNTs. The incandescence corresponds to blackbody radiation from laser-heated CNTs at {approx}2400 K. Post-LII craters with well-defined ring boundaries in the CNT array were observed and examined with scanning electron microscopy and Raman spectroscopy. The enhanced purity of CNTs after LII as indicated by Raman spectroscopy studies was attributed to the removal of amorphous carbons on the as-grown CNTs during LII. A dynamic study of the crater formation further elucidates the nature of such craters. Through a systematic study of the effect of vacuum level and gaseous environment on LII, we discovered the process of thermal runaway during LII in CNTs. Thermal runaway is a threat to a sustained LII and can be prevented in nitrogen and argon environments. Oxygen was found to be responsible for thermal runaway reactions.

36 MATERIALS SCIENCE↗

A comparative study of TiN and TiC: Oxidation resistance and retention of xenon at high temperature and under degraded vacuum

Dense TiN and TiC samples were prepared by hot pressing using micrometric powders. Xenon species (simulating rare gas fission products) were then implanted into the ceramics. The samples were annealed for 1 h at 1500 deg. C under several degraded vacuums with P{sub O{sub 2}} varying from 10{sup -6} to 2x10{sup -4} mbars. The oxidation resistance of the samples and their retention properties with respect to preimplanted xenon species were analyzed using scanning electron microscopy, grazing incidence x-ray diffraction, Rutherford backscattering spectrometry, and nuclear backscattering spectrometry. Results indicate that TiC is resistant to oxidation and does not release xenon for P{sub O{sub 2{<=}}}6x10{sup -6} mbars. When P{sub O{sub 2}} increases, geometric oxide crystallites appear at the surface depending on the orientation and size of TiC grains. These oxide phases are Ti{sub 2}O{sub 3}, Ti{sub 3}O{sub 5}, and TiO{sub 2}. Apparition of oxide crystallites is associated with the beginning of xenon release. TiC surface is completely covered by the oxide phases at P{sub O{sub 2}}=2x10{sup -4} mbars up to a depth of 3 {mu}m and the xenon is then completely released. For TiN samples, the results show a progressive apparition of oxide crystallites (Ti{sub 3}O{sub 5} mainly) at the surface when P{sub O{sub 2}} increases. The presence of the oxide crystallites is also directly correlated with xenon release, the more oxide crystallites are growing the more xenon is released. TiN surface is completely covered by an oxide layer at P{sub O{sub 2}}=2x10{sup -4} mbars up to 1 {mu}m. A correlation between the initial fine microstructure of TiN and the properties of the growing layer is suggested.

36 MATERIALS SCIENCE↗

Large-scale controllable synthesis of dumbbell-like BiVO{sub 4} photocatalysts with enhanced visible-light photocatalytic activity

The controllable synthesis of novel dumbbell-like BiVO{sub 4} hierarchical nanostructures has been successfully obtained via a simple hydrothermal route. The as-synthesized products were studied by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy and UV-vis absorption spectroscopy. The results showed that the nucleation and growth of the nanodumbbells were governed by an oriented aggregation growth mechanism. It is noteworthy that the concentration of poly(vinyl pyrrolidone) and the volume ratio of H{sub 2}O to CH{sub 3}COOH were crucial to the growth of the final nanoarchitectures. Control experiments were also carried out to investigate the factors which impact on the morphology of the products. Furthermore, the as-prepared BiVO{sub 4} hierarchical nanostructures demonstrated the superior visible-light-driven photocatalytic efficiency, which is helpful for the separation and recycle considering their promising applications in harmful pollutants disposal. - Graphical Abstract: The controllable synthesis of novel dumbbell-like BiVO{sub 4} hierarchical nanostructures has been successfully obtained via a simple hydrothermal route; the as-prepared BiVO{sub 4} hierarchical nanostructures demonstrated the superior visible-light-driven photocatalytic efficiency. Highlights: Black-Right-Pointing-Pointer Dumbbell-like BiVO{sub 4} structures were synthesized and characterized for the first time. Black-Right-Pointing-Pointer The volume ratios of H{sub 2}O to CH{sub 3}COOH were crucial to the final morphologies. Black-Right-Pointing-Pointer Their photocatalytic activity was up to 90% under visible-light irradiation. Black-Right-Pointing-Pointer Dumbbell-like BiVO{sub 4} structures may utilize the pollutant disposal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of monodisperse spherical SiO{sub 2}-RE{sub 2}O{sub 3} (RE=rare earth elements) and SiO{sub 2}-Gd{sub 2}O{sub 3}:Ln{sup 3+} (Ln=Eu, Tb, Dy, Sm, Er, Ho) particles with core-shell structure

Spherical SiO{sub 2} particles have been coated with rare earth oxide layers by a Pechini sol-gel process, leading to the formation of core-shell structured SiO{sub 2}-RE{sub 2}O{sub 3} (RE=rare earth elements) and SiO{sub 2}-Gd{sub 2}O{sub 3}:Ln{sup 3+} (Ln=Eu, Tb, Dy, Sm, Er, Ho) particles. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), photoluminescence (PL), and cathodoluminescence spectra as well as lifetimes were used to characterize the resulting SiO{sub 2}-RE{sub 2}O{sub 3} (RE=rare earth elements) and SiO{sub 2}-Gd{sub 2}O{sub 3}:Ln{sup 3+} (Eu{sup 3+}, Tb{sup 3+}, Dy{sup 3+}, Sm{sup 3+}, Er{sup 3+}, Ho{sup 3+}) samples. The obtained core-shell phosphors have perfect spherical shape with narrow size distribution (average size ca. 380 nm), smooth surface and non-agglomeration. The thickness of shells could be easily controlled by changing the number of deposition cycles (40 nm for two deposition cycles). Under the excitation of ultraviolet, the Ln{sup 3+} ion mainly shows its characteristic emissions in the core-shell particles from Gd{sub 2}O{sub 3}:Ln{sup 3+} (Eu{sup 3+}, Tb{sup 3+}, Sm{sup 3+}, Dy{sup 3+}, Er{sup 3+}, Ho{sup 3+}) shells. - Graphical abstract: The advantages of core-shell phosphors are the easy availability of homogeneous spherical morphology in different size, and its corresponding luminescence color can change from red, yellow to green.

36 MATERIALS SCIENCE↗

Structural, microstructural and surface properties of a specific CeO{sub 2}-Bi{sub 2}O{sub 3} multiphase system obtained at 600 {sup o}C

Polycrystalline samples of (1-x) CeO{sub 2}-x/2 Bi{sub 2}O{sub 3} phases, where x is the atom fraction of bismuth have been synthesized by the precipitation process and after the thermal treatment at 600 {sup o}C, under air. Samples are first characterized by the X-ray diffraction and scanning electron microscopy. To determine the samples specific surface areas, Brunauer-Emmett-Teller (BET) analyses have been performed. In the composition range 0{<=}x{<=}0.20, a cubic solid solution with fluorite structure is obtained. For compositions x comprised between 0.30 and 0.90, two types of T' (or {beta}') and T (or {beta}) tetragonal phases, similar to the well-known {beta}' or {beta} Bi{sub 2}O{sub 3} metastable structural varieties, are observed. However, the crystal cell volumes of these {beta}' or {beta} Bi{sub 2}O{sub 3} phases increase with the composition x in bismuth: this might be due to the presence of defects or substitution by cerium atoms, in the tetragonal lattices. Using X-ray diffraction profile analyses, correlations between bismuth composition x and crystal sizes or lattice distortions have been established. The solid-gas interactions between these polycrystalline materials and air-CH{sub 4} and air-CO flows have been studied as a function of temperature and composition x, using Fourier transform infrared (FTIR) analyses of the conversions of CH{sub 4} and CO gases into the CO{sub 2} gas. The transformations of CH{sub 4} and CO molecules as a function of time and temperature are determined through the intensities of FTIR CO{sub 2} absorption bands. Using the specific surface areas determined from BET analyses, these FTIR intensities have been normalized and compared. For all bismuth compositions, a low catalytic reactivity is observed with air-CH{sub 4} gas flows, while, for the highest bismuth compositions, a high catalytic reactivity is observed with air-CO gas flows. -- Graphical abstract: Catalytic efficiencies of CeO{sub 2}-Bi{sub 2}O{sub 3}system: catalytic actions on methane (on the left) or carbon monoxide (on the right) of (1-x)CeO{sub 2}-x/2 Bi{sub 2}O{sub 3} samples, as a function of the fraction x, and for fixed temperatures: on the vertical axis, the intensities of CO{sub 2} FTIR absorption bands are reported. Strong efficiency of bismuth rich samples for CO conversion. Display Omitted Research highlights: {yields} Stabilization of metastable polymorph Bi{sub 2}O{sub 3} phases in the mix system [(1-x)CeO{sub 2}+(x/2)Bi{sub 2}O{sub 3}] at 600 {sup o}C. {yields} Solid gas interactions between this system and air-CO or air-CH{sub 4} gas flows at various temperatures and bismuth compositions. {yields} High efficiency of bismuth rich samples to convert CO into CO{sub 2}.

36 MATERIALS SCIENCE↗

Advanced Characterization of Irradiated Fuels and Materials at INL

Advanced characterization of the irradiated fuels and materials is crucial to help understanding the material and fuel property changes under irradiation. Microstructural defect evolution down to nanometer scale could strongly affect the material and fuel performance on macroscale. Radiation-induced material degradation include dimensional instability, hardening and embrittlement, intergranular cracking, radiation-enhanced chemical interaction at the interfaces and breakaway swelling. To mitigate the radiation damage, advanced characterization on irradiated microstructure, microchemistry, micromechanical property and local thermal property is necessary to identify the controlling mechanisms that are responsible to the degradations. This presentation provides a summary of the advanced characterization capabilities at the Irradiation Materials Characterization Laboratory (IMCL), Materials and Fuels Complex (MFC), Idaho National Laboratory (INL). It highlights the recently established capabilities including shield sample preparation area (SSPA), shield confinement cells for two focused ion beam (FIB) systems, a shielded electron probe microanalysis (EPMA), the thermal property microscopy (TPM) along with non-shielded instruments like scanning electron microscopy (SEM), X-ray diffractometer, and transmission electron microscopy (TEM). Some examples on advanced characterizations on irradiated structural materials and fuels will be presented. It demonstrates the power of combining sample preparation of highly radioactive materials with the advanced characterization down to atomic resolutions within one facility.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Photoresponse properties of large-area MoS{sub 2} atomic layer synthesized by vapor phase deposition

Photoresponse properties of a large area MoS{sub 2} atomic layer synthesized by vapor phase deposition method without any catalyst are studied. Scanning electron microscopy, atomic force microscopy, Raman spectrum, and photoluminescence spectrum characterizations confirm that the two-dimensional microstructures of MoS{sub 2} atomic layer are of high quality. Photoelectrical results indicate that the as-prepared MoS{sub 2} devices have an excellent sensitivity and a good reproducibility as a photodetector, which is proposed to be ascribed to the potential-assisted charge separation mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of coaxial CoFe{sub 2}O{sub 4} - K{sub 0.5}Na{sub 0.5}NbO{sub 3} nanotubes by sol-gel technique using inexpensive templates

A modified sol-gel method was introduced by employing a cost effective novel template to synthesize coaxial one dimensional (1-D) composite nanostructures based on CoFe{sub 2}O{sub 4} (CFO) - K{sub 0.5}Na{sub 0.5}NbO{sub 3} (KNN) and magnetic nanostructures based on CoFe{sub 2}O{sub 4} (CFO). The studies with scanning electron microscopy (SEM) and atomic force microscopy (AFM) revealed that the composite material is characterized by the 1-D tubular structure. The absorption edge is blue shifted for both KNN and CFO nanotubes due to the lattice strain effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cation-Driven Assembly of Bilayered Vanadium Oxide and Graphene Oxide Nanoflakes to Form Two-Dimensional Heterostructure Electrodes for Li-Ion Batteries

Lithium preintercalated bilayered vanadium oxide (LVO or δ-Li x V 2 O 5 ·nH 2 O) and graphene oxide (GO) nanoflakes were assembled using a concentrated lithium chloride solution and annealed under vacuum at 200 °C to form two-dimensional (2D) δ-Li x V 2 O 5 ·nH 2 O and reduced GO (rGO) heterostructures. Here we found that the Li + ions from LiCl enhanced the oxide/carbon heterointerface formation and served as stabilizing ions to improve structural and electrochemical stability. The graphitic content of the heterostructure could be easily controlled by changing the initial GO concentration prior to assembly. We found that increasing the GO content in our heterostructure composition helped inhibit the electrochemical degradation of LVO during cycling and improved the rate capability of the heterostructure. A combination of scanning electron microscopy and X-ray diffraction was used to help confirm that a 2D heterointerface formed between LVO and GO, and the final phase composition was determined using energy-dispersive X-ray spectroscopy and thermogravimetric analysis. Scanning transmission electron microscopy and electron energy-loss spectroscopy were additionally used to examine the heterostructures at high resolution, mapping the orientations of rGO and LVO layers and locally imaging their interlayer spacings. Further, electrochemical cycling of the cation-assembled LVO/rGO heterostructures in Li-ion cells with a non-aqueous electrolyte revealed that increasing the rGO content led to improved cycling stability and rate performance, despite slightly decreased charge storage capacity. The heterostructures with 0, 10, 20, and 35 wt % rGO exhibited capacities of 237, 216, 174, and 150 mAh g –1 , respectively. Moreover, the LVO/rGO-35 wt % and LVO/rGO-20 wt % heterostructures retained 75% (110 mAh g–1) and 67% (120 mAh g –1 ) of their initial capacities after increasing the specific current from 20 to 200 mA g –1 , while the LVO/rGO-10 wt % sample retained only 48% (107 mAh g –1 ) of its initial capacity under the same cycling conditions. In addition, the cation-assembled LVO/rGO electrodes exhibited enhanced electrochemical stability compared to electrodes prepared through physical mixing of LVO and GO nanoflakes in the same ratios as the heterostructure electrodes, further revealing the stabilizing effect of a 2D heterointerface. The cation-driven assembly approach, explored in this work using Li + cations, was found to induce and stabilize the formation of stacked 2D layers of rGO and exfoliated LVO. The reported assembly methodology can be applied for a variety of systems utilizing 2D materials with complementary properties for applications as electrodes in energy storage devices.

25 ENERGY STORAGE↗

Fluoride removal performance of glass derived hydroxyapatite

Research highlights: {yields} Novel sodium calcium borate glass derived hydroxyapatite (G-HAP) is prepared. {yields} Micro-G-HAP adsorbs F{sup -} ions in solutions more effectively than commercial nano-HAP. {yields} The adsorption kinetics and isotherms are well fitted by a second order kinetic model and Freundlich isotherm model. -- Abstract: A novel sodium calcium borate glass derived hydroxyapatite (G-HAP) with different ranges of particle size was prepared by immersion sodium calcium borate glass in 0.1 M K{sub 2}HPO{sub 4} solution by the ratio of 50 g L{sup -1} for 7 days. The unique advantage of G-HAP for the adsorption of fluoride ions in solutions was studied. The effects of size and quantity of particles, pH value and adsorption time on adsorption performance were investigated. The maximum adsorption capacity was 17.34 mg g{sup -1} if 5 g L{sup -1}, <100 {mu}m G-HAP was added to a solution with an initial pH value of 6.72 and the adsorption time was 12 h. The results showed that the micro-G-HAP could immobilize F{sup -} in solution more effectively than commercial nano-HAP, which makes potential application of the G-HAP in removing the fluoride ions from wastewater. The adsorption kinetics and isotherms for F{sup -} could be well fitted by a second order kinetic model and Freundlich isotherm model respectively, which could be used to describe the adsorption behavior. The mechanism of G-HAP in immobilizing F{sup -} from aqueous solutions was investigated by the X-ray diffraction (XRD), infrared spectra (IR) and scanning electron microscopy (SEM).

36 MATERIALS SCIENCE↗

Formation of a single-phase Ti{sub 3}AlC{sub 2} from a mixture of Ti, Al and TiC powders with Sn as an additive

A high purity of Ti{sub 3}AlC{sub 2} powder has been synthesized by pressureless sintering a mixture of Ti/Al/TiC/Sn (Sn as a sintering additive) powders with a mole ratio of 1:1:1:0.1 in the temperature range of 1350-1500 deg. C for 10 min in an Ar atmosphere. Sn is an effective additive and its effect on the formation of Ti{sub 3}AlC{sub 2} has been discussed. The formation mechanism of Ti{sub 3}AlC{sub 2} has been proposed. X-ray diffraction analysis and scanning electron microscopy were used to characterize the samples.

36 MATERIALS SCIENCE↗

Bipolar resistive switching performance of the nonvolatile memory cells based on (AgI){sub 0.2}(Ag{sub 2}MoO{sub 4}){sub 0.8} solid electrolyte films

Resistive switching memory cells with polycrystalline (AgI){sub 0.2}(Ag{sub 2}MoO{sub 4}){sub 0.8} (AIMO) solid electrolyte films as storage medium were fabricated on SiO{sub 2}/Pt/Ti/Si substrates by using pulse laser deposition technique and focused ion beam lithography. X-ray diffraction, scanning electron microscopy, and energy dispersive x-ray analysis have been employed to investigate the structure, the surface morphology, and the composition of AIMO thin films. The Ag/AIMO/Pt memory cells with sandwich structure exhibit stable, reproducible, and reliable resistive switching characteristics. The ratio of resistance between high resistance states and low resistance states can reach approx10{sup 5}. Moreover, the low resistance is approx500 OMEGA at a compliance current of 0.5 mA, which is favorable to reduce the power dissipation of the entire circuit. The switching-on mechanism has been discussed and the metallic conduction characteristic has also been verified. The fast response speed and the good retention properties further indicate that polycrystalline AIMO thin film is a potential candidate for the next generation nonvolatile memory.

36 MATERIALS SCIENCE↗

Synthesis of few-layered graphene by H{sub 2}O{sub 2} plasma etching of graphite

Herein, we reported an approach to synthesize few-layered graphene by etching of the graphite using H{sub 2}O{sub 2} plasma technique. The synthesized few-layered graphene was characterized by scanning electron microscopy, atomic force microscopy, Raman spectroscopy, and x-ray photoelectron spectroscopy (XPS). The analysis showed that few-layered graphene was formed in high quality level. The XPS analysis suggested that H{sub 2}O{sub 2} plasma etching of graphite could oxidize graphene and generated -C-OH and >C=O groups on the graphene surfaces. The H{sub 2}O{sub 2} plasma technique is an easy and environmental friendly method to synthesize few-layered graphene from the graphite.

36 MATERIALS SCIENCE↗

Hydrothermal syntheses, structures, and magnetic properties of (NH{sub 4}){sub 2}NaVF{sub 6} and Na{sub 3}VF{sub 6}

The single crystals of perovskite fluorides (NH{sub 4}){sub 2}NaVF{sub 6} and Na{sub 3}VF{sub 6} were synthesized under mild hydrothermal conditions. The structures of the compounds were determined by means of single-crystal and powder X-ray diffraction analyses, respectively. (NH{sub 4}){sub 2}NaVF{sub 6} has a cubic elpasolite-type structure and crystallizes in the space group Fm3-bar m with lattice constant a=8.495(0) A. Rietveld refinement indicates that Na{sub 3}VF{sub 6} has a monoclinic structure and is in space group P2{sub 1}/n. The compounds were characterized by scanning electron microscopy, thermogravimetric and differential thermal analysis, and variable temperature magnetic susceptibility. With the temperature decreasing, the magnetic studies of the compounds showed the magnetic ordering was related to the crystallographic features and isolated magnetic units. - Graphical Abstract: The single crystals of perovskite fluorides (NH{sub 4}){sub 2}NaVF{sub 6} and Na{sub 3}VF{sub 6} were synthesized under mild hydrothermal conditions. (NH{sub 4}){sub 2}NaVF{sub 6} has a cubic elpasolite-type structure and crystallizes in the space group Fm3-barm with lattice constant a=8.495(0) A. The compound of Na{sub 3}VF{sub 6} has a monoclinic structure and in space group P2{sub 1}/n. The hydrothermal synthesis, structural characterization and magnetic properties of the two compounds were investigated.

36 MATERIALS SCIENCE↗

The influence of A-site rare-earth for barium substitution on the chemical structure and ferroelectric properties of BZT thin films

Rare-earth (RE) doped Ba(Zr,Ti)O{sub 3} (BZT) thin films were prepared by rf-magnetron sputtering from a Ba{sub 0.90}Ln{sub 0.067}Zr{sub 0.09}Ti{sub 0.91}O{sub 3} (Ln=La, Nd) target. The films were deposited at a substrate temperature of 600 deg. C in a high oxygen pressure atmosphere. X-ray diffraction (XRD) patterns of RE-BZT films revealed a <001> epitaxial crystal growth on Nb-doped SrTiO{sub 3}, <001> and <011> growth on single-crystal Si, and a <111>-preferred orientation on Pt-coated Si substrates. Scanning electron microscopy (SEM) showed uniform growth of the films deposited, along with the presence of crystals of about half-micron size on the film's surface. Transmission electron microscopy (TEM) evidenced high crystalline films with thicknesses of about 100 nm for 30 min of sputtering. Electron-probe microanalysis (EPMA) corroborated the growth rate (3.0-3.5 nm/min) of films deposited on Pt-coated Si substrates. X-ray photoelectron spectroscopy (XPS), in depth profile mode, showed variations in photoelectron Ti 2p doublet positions at lower energies with spin-orbital distances characteristic of BaTiO{sub 3}-based compounds. The XPS analysis revealed that lanthanide ions positioned onto the A-site of the BZT-perovskite structure increasing the MO{sub 6}-octahedra distortion (M=Ti, Zr) and, thereby, modifying the Ti-O binding length. Polarization-electric field hysteresis loops on Ag/RE-doped BZT/Pt capacitor showed good ferroelectric behavior and higher remanent polarization values than corresponding non-doped system. - Graphical abstract: XPS narrow-scan spectra of Ti 2p doublets of the Nd-doped BZT films deposited on Pt-coated Si substrate.

36 MATERIALS SCIENCE↗