Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUBSTRATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Epitaxial growth of Heusler alloy Co{sub 2}MnSi/MgO heterostructures on Ge(001) substrates

We prepared Heusler alloy Co{sub 2}MnSi/MgO heterostructures on single-crystal Ge(001) substrates through magnetron sputtering for Co{sub 2}MnSi and electron beam evaporation for MgO as a promising candidate for future generation spin-based functional devices. Structural investigations showed that the Co{sub 2}MnSi/MgO heterostructure was grown epitaxially on a Ge(001) substrate with extremely smooth and abrupt interfaces and showed the L2{sub 1} structure for the Co{sub 2}MnSi film. Furthermore, a sufficiently high saturation magnetization ({mu}{sub s}) value of 5.1 {mu}{sub B}/f.u. at 10 K, which is close to the theoretically predicted {mu}{sub s} of 5.0 {mu}{sub B}/f.u. for half-metallic Co{sub 2}MnSi, was obtained for prepared Co{sub 2}MnSi films.

36 MATERIALS SCIENCE↗

Highly textured Sr, Nb co-doped BiFeO{sub 3} thin films grown on SrRuO{sub 3}/Si substrates by rf- sputtering

In this study, (011)-highly oriented Sr, Nb co-doped BiFeO{sub 3} (BFO) thin films were successfully grown on SrRuO{sub 3}/Si substrates by rf-magnetron sputtering. The presence of parasite magnetic phases was ruled out based on the high resolution x-ray diffraction data. BFO films exhibited a columnar-like grain growth with rms surface roughness values of {approx_equal}5.3 nm and average grain sizes of {approx_equal}65-70 nm for samples with different thicknesses. Remanent polarization values (2P{sub r}) of 54 {mu}C cm{sup -2} at room temperature were found for the BFO films with a ferroelectric behavior characteristic of an asymmetric device structure. Analysis of the leakage mechanisms for this structure in negative bias suggests Schottky injection and a dominant Poole-Frenkel trap-limited conduction at room temperature. Oxygen vacancies and Fe{sup 3+}/Fe{sup 2+} trap centers are consistent with the surface chemical bonding states analysis from x-ray photoelectron spectroscopy data. The (011)-BFO/SrRuO{sub 3}/Si film structure exhibits a strong magnetic interaction at the interface between the multiferroic film and the substrate layer where an enhanced ferromagnetic response at 5 K was observed. Zero-field cooled (ZFC) and field cooled (FC) magnetization curves of this film system revealed a possible spin glass behavior at spin freezing temperatures below 30 K depending on the BFO film thickness.

36 MATERIALS SCIENCE↗

Twin symmetry texture of energetically condensed niobium thin films on sapphire substrate (a-plane Al 2 O 3 )

An energetic condensation technique, cathodic arc discharge deposition, is used to growepitaxialNiobium(Nb)thin films on a-plane sapphire (hexagonal-closed-packed Al 2 O 3 ) at moderate substrate heating temperature (<400 °C). The epitaxial Nb(110)/Al 2 O 3 (1,1,-2,0) thin films reached a maximum residual resistance ratio (RRR) value 214, despite using a reactor-grade Nbcathode source whose RRR was only 30. The measurements suggest that the film’s density of impurities and structural defects are lower when compared to Nb films produced by other techniques, such as magnetron sputtering, e-beam evaporation or molecular-beam-epitaxy. At lower substrate temperature, textured polycrystalline Nbthin films were created, and the films might have twin symmetry grains with {110} orientations in-plane. The texture was revealed by x-ray diffraction pole figures. The twin symmetry might be caused by a combination effect of the Nb/Al 2 O 3 three-dimensional epitaxial relationship (“3D-Registry” Claassen’s nomenclature) and the “Volmer-Weber” (Island) growth model. However, pole figures obtained by electron backscattering diffraction (EBSD) found no twin symmetry on the thin films’ topmost surface (~50 nm in depth). The EBSD pole figures showed only one Nb{110} crystal plane orientation. Finally, a possible mechanism is suggested to explain the differences between the bulk (XRD) and surface (EBSD) pole figures.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of Ge{sub 1-x}Mn{sub x} thin films grown on Ge (001) substrates

We investigate the structural and magneto-optical properties of Mn-doped Ge (Ge{sub 1-x}Mn{sub x}) films with self-organized nanocolumns, grown on Ge (001) substrates by molecular beam epitaxy (MBE), in which the substrate temperature (T{sub S}) and growth rate (R{sub G}) are varied. Transmission electron microscopy (TEM) observations and magnetic circular dichroism (MCD) measurements reveal that Mn-rich nanocolumnar precipitation is formed in the Ge{sub 1-x}Mn{sub x} films grown at T{sub S} {<=} 100 deg. C, with keeping the size and spacing. At higher T{sub S} ({>=}150 deg. C), ferromagnetic Mn{sub 5}Ge{sub 3} clusters are formed. It is also found that the Mn distribution in the Ge{sub 1-x}Mn{sub x} films can be controlled: By lowering T{sub S} or increasing R{sub G}, the Mn content x{sub nc} in the nanocolumns decreases and Mn atoms are more distributed into the Ge matrix, and eventually the magnetic properties are changed. The formation of the nanocolumns is explained by the spinodal decomposition in the layer-by-layer growth mode. We analyzed the periodicity and Mn content x{sub nc} of nanocolumns by using the Cahn-Hilliard equation.

36 MATERIALS SCIENCE↗

Structural properties of Bi{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3} topological insulators grown by molecular beam epitaxy on GaAs(001) substrates

Thin films of Bi{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3} have been grown on deoxidized GaAs(001) substrates using molecular beam epitaxy. Cross-sectional transmission electron microscopy established the highly parallel nature of the Te(Se)-Bi-Te(Se)-Bi-Te(Se) quintuple layers deposited on the slightly wavy GaAs substrate surface and the different crystal symmetries of the two materials. Raman mapping confirmed the presence of the strong characteristic peaks reported previously for these materials in bulk form. The overall quality of these films reveals the potential of combining topological insulators with ferromagnetic semiconductors for future applications.

36 MATERIALS SCIENCE↗

Mechanically tunable magnetic properties of Fe{sub 81}Ga{sub 19} films grown on flexible substrates

We investigated on magnetic properties of magnetostrictive Fe{sub 81}Ga{sub 19} films grown on flexible polyethylene terephthalate (PET) substrates under various mechanical strains. The unstrained Fe{sub 81}Ga{sub 19} films exhibit a significant uniaxial magnetic anisotropy due to a residual stress in PET substrates. It was found that the squareness of hysteresis loops can be tuned by an application of strains, inward/compressive or outward/tensile bending of the films. A modified Stoner-Wohlfarth model with considering a distribution of easy axes in polycrystalline films was developed to account for the mechanically tunable magnetic properties in flexible Fe{sub 81}Ga{sub 19} films. These results provide an alternative way to tune mechanically magnetic properties, which is particularly important for developing flexible magnetoelectronic devices.

36 MATERIALS SCIENCE↗

CdSe/CdTe type-II superlattices grown on GaSb (001) substrates by molecular beam epitaxy

CdSe/CdTe superlattices are grown on GaSb substrates using molecular beam epitaxy. X-ray diffraction measurements and cross-sectional transmission electron microscopy images indicate high crystalline quality. Photoluminescence (PL) measurements show the effective bandgap varies with the superlattice layer thicknesses and confirm the CdSe/CdTe heterostructure has a type-II band edge alignment. The valence band offset between unstrained CdTe and CdSe is determined as 0.63 {+-} 0.06 eV by fitting the measured PL peak positions using the envelope function approximation and the Kronig-Penney model. These results suggest that CdSe/CdTe superlattices are promising candidates for multi-junction solar cells and other optoelectronic devices based on GaSb substrates.

36 MATERIALS SCIENCE↗

Substrate effect on the electronic structures of CuPc/graphene interfaces

The interfacial electronic structures of copper phthalocyanine (CuPc) deposited on a single-layer graphene (SLG) film prepared on Cu and SiO{sub 2} substrates (SLG/Cu and SLG/SiO{sub 2}) were investigated using ultraviolet photoelectron spectroscopy. The ionization energy of CuPc on SLG/Cu and SLG/SiO{sub 2} substrate is, respectively, 5.62 eV and 4.97 eV. The energy level alignments at the two interfaces were estimated. The results revealed that the height of the electron (hole) injection barriers are 1.20 (1.10) and 1.38 (0.92) eV at CuPc/SLG/Cu and CuPc/SLG/SiO{sub 2} interfaces, respectively.

36 MATERIALS SCIENCE↗

Designing interlayers to improve the mechanical reliability of transparent conductive oxide coatings on flexible substrates

In this study, we investigate the effect of interlayers on the mechanical properties of transparent conductive oxide (TCO) on flexible polymer substrates. Indium tin oxide (ITO), which is the most widely used TCO film, and Ti, which is the most widely used adhesive interlayer, are selected as the coating and the interlayer, respectively. These films are deposited on the polymer substrates using dc-magnetron sputtering to achieve varying thicknesses. The changes in the following critical factors for film cracking and delamination are analyzed: the internal stress ({sigma}{sup i}) induced in the coatings during deposition using a white light interferometer, the crystallinity using a transmission electron microscope, and the surface roughness of ITO caused by the interlayer using an atomic force microscope. The resistances to the cracking and delamination of ITO are evaluated using a fragmentation test. Our tests and analyses reveal the important role of the interlayers, which significantly reduce the compressive {sigma}{sup i} that is induced in the ITO and increase the resistance to the buckling delamination of the ITO. However, the relaxation of {sigma}{sup i} is not beneficial to cracking because there is less compensation for the external tension as {sigma}{sup i} further decreases. Based on these results, the microstructural control is revealed as a more influential factor than {sigma}{sup i} for improving crack resistance.

36 MATERIALS SCIENCE↗

Effect of substrate temperature on microstructure of epitaxial ZnO films grown on sapphire by sputtering

The microstructure of epitaxial ZnO films on (0001) sapphire substrates deposited by reactive sputtering in substrate temperature (T{sub s}) range of 100 - 500 deg. C were investigated by High-resolution X-ray diffraction. The studies show the presence of a strained 2D layer along with 3D crystallites at low T{sub s}, whereas 3D growth is dominant at higher T{sub s}, resulting in formation of mosaic structure with lesser point and line defects.

36 MATERIALS SCIENCE↗

Deposition of stress free c-axis oriented LiNbO{sub 3} thin film grown on (002) ZnO coated Si substrate

C-axis oriented lithium niobate thin films have been deposited on Si substrate using RF sputtering technique. A thin buffer layer of c-axis (002) oriented ZnO on Si substrate has been used as a nucleating layer to promote the growth of (006) oriented LiNbO{sub 3} film. The processing gas composition and pressure are found to be very critical in obtaining stress free LiNbO{sub 3} film having desired (006) orientation. The LiNbO{sub 3} films deposited under unique combination of sputtering pressure (10 mTorr) and argon percentage (80%) in reactive gas (Ar + O{sub 2}) composition become almost stress free having lattice parameter (1.3867 A) close to the bulk value. The observed variation in the structural properties and optical phonon modes observed by Raman spectroscopic studies of the oriented LiNbO{sub 3} thin film with stress has been correlated with growth kinetics.

36 MATERIALS SCIENCE↗

Realization of compressively strained GaN films grown on Si(110) substrates by inserting a thin AlN/GaN superlattice interlayer

We investigate the strain properties of GaN films grown by plasma-assisted molecular beam epitaxy on Si(110) substrates. It is found that the strain of the GaN film can be converted from a tensile to a compressive state simply by inserting a thin AlN/GaN superlattice structure (SLs) within the GaN film. The GaN layers seperated by the SLs can have different strain states, which indicates that the SLs plays a key role in the strain modulation during the growth and the cooling down processes. Using this simple technique, we grow a crack-free GaN film exceeding 2-{mu}m-thick. The realization of the compressively strained GaN film makes it possible to grow thick GaN films without crack generation on Si substrates for optic and electronic device applications.

36 MATERIALS SCIENCE↗

Fabrication of high aspect grating using bonded substrate for X-ray refraction imaging by Talbot-Lau interferometer

In order to improve the image quality of X-ray refraction images using a Talbot-Lau interferometer, we have been attempting to fabricate gratings with high aspect ratio. In our attempt, deep grooves of grating structure were channeled on a Si substrate bonded by Au diffusion bonding method, and the grooves were filled with Au where the Au layer used for the bonding Si substrate was acting as a seed layer of Au electroplating. From the results of a visibility measurement and a cross sectional SEM image, it was confirmed that the grooves with a pitch of 5.8 {mu}m and a depth of 100 {mu}m could be successfully filled with Au over a large area of 72 Multiplication-Sign 80 mm{sup 2}. Using this grating, the X-ray refraction images for the cartilage of a knee joint of a livestock pig could be obtained where SPS method was employed for the single-shot image acquisition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterization of GaN thin films deposited on different substrates using a low-cost electrochemical deposition technique

Gallium nitride GaN thin films were deposited on three different substrates; Si (111), Si (100) and ITO coated glass using electrochemical deposition technique at 20 Degree-Sign C. A mixture of gallium nitrate, ammonium nitrate was used as electrolyte. The deposited films were investigated at room temperature by a series of material characterization techniques, namely; scanning electron microscopy (SEM), EDX and X-ray diffraction (XRD). SEM images and EDX results indicated that the growth of GaN films varies according to the substrates. XRD analyses showed the presence of hexagonal wurtzite and cubic zinc blende GaN phases with the crystallite size around 18-29 nm.

36 MATERIALS SCIENCE↗

Self-assembly of InAs ring complexes on InP substrates by droplet epitaxy

We report the self-assembly of InAs ring complexes on InP (100) substrates by droplet epitaxy. Single-ring, ring-disk complex, and concentric double-ring structures were formed by controlling the As beam flux and substrate temperature. A clear photoluminescence signal was detected in a sample where InAs rings were embedded in InGaAs.

36 MATERIALS SCIENCE↗

Diamond as an inert substrate of graphene

Interaction between graphene and semiconducting diamond substrate has been examined with large-scale density functional theory calculations. Clean and hydrogenated diamond (100) and (111) surfaces have been studied. It turns out that weak van der Waals interactions dominate for graphene on all these surfaces. High carrier mobility of graphene is almost not affected, except for a negligible energy gap opening at the Dirac point. No charge transfer between graphene and diamond (100) surfaces is detected, while different charge-transfer complexes are formed between graphene and diamond (111) surfaces, inducing either p-type or n-type doping on graphene. Therefore, diamond can be used as an excellent substrate of graphene, which almost keeps its electronic structures at the same time providing the flexibility of charge doping.

74 ATOMIC AND MOLECULAR PHYSICS↗

Molecular beam epitaxy of high structural quality Bi{sub 2}Se{sub 3} on lattice matched InP(111) substrates

Epitaxial layers of the topological insulator Bi{sub 2}Se{sub 3} have been grown by molecular beam epitaxy on laterally lattice-matched InP(111)B substrates. High resolution X-ray diffraction shows a significant improvement of Bi{sub 2}Se{sub 3} crystal quality compared to layers deposited on other substrates. The measured full width at half maximum of the rocking curve is {Delta}{omega}=13 arc sec, and the ({omega}-2{theta}) scans exhibit clear layer thickness fringes. Atomic force microscope images show triangular twin domains with sizes increasing with layer thickness. The structural quality of the domains is confirmed on the microscopic level by transmission electron microscopy.

36 MATERIALS SCIENCE↗

Atomic scattering from an adsorbed monolayer solid with a helium beam that penetrates to the substrate

Diffraction and one-phonon inelastic scattering of a thermal energy helium atomic beam are evaluated in the situation that the target monolayer lattice is so dilated that the atomic beam penetrates to the interlayer region between the monolayer and the substrate. The scattering is simulated by propagating a wavepacket and including the effect of a feedback of the inelastic wave onto the diffracted wave, which represents a coherent re-absorption of the created phonons. Parameters are chosen to be representative of an observed p(1 Multiplication-Sign 1) commensurate monolayer solid of H{sub 2}/NaCl(001) and a conjectured p(1 Multiplication-Sign 1) commensurate monolayer solid of H{sub 2}/KCl(001). For the latter, there are cases where part of the incident beam is trapped in the interlayer region for times exceeding 50 ps, depending on the spacing between the monolayer and the substrate and on the angle of incidence. The feedback effect is large for cases of strong transient trapping.

36 MATERIALS SCIENCE↗