Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SIZE DETERMINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Hydrothermal synthesis of nanocrystalline ZnSe: An in situ synchrotron radiation X-ray powder diffraction study

The hydrothermal synthesis of nanocrystalline ZnSe has been studied by in situ X-ray powder diffraction using synchrotron radiation. The formation of ZnSe was studied using the following starting mixtures: Zn+Se+H{sub 2}O (route A) and ZnCl{sub 2}+Se+H{sub 2}O+Na{sub 2}SO{sub 3} (route B). The route A experiment showed that Zn powder starts reacting with water at 134 deg. C giving ZnO and H{sub 2} followed by the formation of ZnSe which takes place in temperature range from 167 to 195 deg. C. The route B experiment shows a considerably more complex reaction path with several intermediate phases and in this case the formation of ZnSe starts at 141 deg. C and ZnSe and Se were the only crystalline phases observed at the end of the experiment where the temperature was 195 deg. C. The sizes of the nanocrystalline particles were determined to 18 and 9 nm in the route A and B experiments, respectively. Nanocrystalline ZnSe was also synthesized ex situ using the route A and B methods and characterized by conventional X-ray powder diffraction and transmission electron microscopy. An average crystalline domain size of ca. 8 nm was determined by X-ray powder diffraction in fair agreement with TEM images, which showed larger aggregates of nanoparticles having approximate diameters of 10 nm. Furthermore, a method for purification of the ZnSe nanoparticles was developed and the prepared particles showed signs of anisotropic size broadening of the diffraction peaks. - Graphical abstract: Stack of powder diagrams showing the formation of nanocrystalline ZnSe under hydrothermal conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Maximum Size Intersecting Families of Bounded Minimum Positive Co-degree

Let $\mathcal{H}$ be an $r$-uniform hypergraph. The minimum positive co-degree of $\mathcal{H}$, denoted by $\delta_{r-1}^+(\mathcal{H})$, is the minimum $k$ such that if $S$ is an $(r-1)$-set contained in a hyperedge of $\mathcal{H}$, then $S$ is contained in at least $k$ hyperedges of $\mathcal{H}$. For $r\geq k$ fixed and $n$ sufficiently large, we determine the maximum possible size of an intersecting $r$-uniform $n$-vertex hypergraph with minimum positive co-degree $\delta_{r-1}^+(\mathcal{H}) \geq k$ and characterize the unique hypergraph attaining this maximum. This generalizes the Erd\Hos--Ko--Rado theorem which corresponds to the case $k=1$. Furthermore, our proof is based on the delta-system method.

97 MATHEMATICS AND COMPUTING↗

Techniques, applications and future prospects of diamond anvil cells for studying supercritical water systems

In this review, diamond anvil type cells (DACs) are reviewed as a method for studying supercritical water systems. The hydrothermal DAC provides easy and safe experimental access to high pressure (30-3000 MPa) and high temperature (400-800 C) regions and the device allows exploration of supercritical systems at high density (400-1200 kg/m{sup 3}), which is usually difficult or costly with batch or flow systems. In the first part of this review, characteristics of DACs regarding anvil type, DAC type, anvil alignment, heating, analytical methods, pressure and temperature determination, gasket, loading, physical size are discussed with emphasis on DACs that can be used to generate conditions of interest for understanding supercritical water systems. In the second part of this review, applications and key findings of studies on supercritical water systems from geology, chemical, biomass, energy, environmental, polymer, and materials related fields are discussed. Some of the key findings determined with DAC are related to the dissolution or existence of phases at conditions of high temperature and high pressure, however, DAC has been used in many quantitative studies to determine fundamental properties such as speeds of sound, phase behavior, solubilities, partition coefficients and viscosities. Future prospects for DAC as a method for exploring supercritical water systems include combination of DAC with transmission electron microscopy (TEM) for studying nanostructures, use of high-speed streak cameras to study high-speed reactions, combustions, and energetic materials, use of time-dependent loads to study kinetics, precipitation and crystallization phenomena, the use of DAC with synchrotron radiation to follow reaction and material processes in situ, and the many modifications that can be made to DAC anvils and rapid heating methods such as lasers and masers used in conjunction with in situ techniques. The DAC is a highly versatile instrument and should find widespread use in studying supercritical water systems.

09 BIOMASS FUELS↗

Fizeau interferometer system for fast high resolution studies of spectral line shapes

A monochromator/Fizeau interferometer/intensified CCD camera system is described that was developed for the measurement of the shape of spectral lines that are rapidly time varying. The most important operating parameter that determines the performance of the instrument is the size of the entrance aperture as this determines both the light throughput and the effective interferometer wavelength resolution. This paper discusses, both theoretically and experimentally, the effect of the finite source area on the instrumental resolution to assist in optimizing the choice of this parameter. A second effect that often produces a practical limit to the quality of the spectra is drift of the interferometer plates. Measurements of the shapes of spectral lines of ions and atoms ejected from the cathode spot of continuous and pulsed cathodic arcs are presented to demonstrate the utility of this instrument.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

THE SPLASH SURVEY: SPECTROSCOPY OF 15 M31 DWARF SPHEROIDAL SATELLITE GALAXIES

We present a resolved star spectroscopic survey of 15 dwarf spheroidal (dSph) satellites of the Andromeda galaxy (M31). We filter foreground contamination from Milky Way (MW) stars, noting that MW substructure is evident in this contaminant sample. We also filter M31 halo field giant stars and identify the remainder as probable dSph members. We then use these members to determine the kinematical properties of the dSphs. For the first time, we confirm that And XVIII, XXI, and XXII show kinematics consistent with bound, dark-matter-dominated galaxies. From the velocity dispersions for the full sample of dSphs we determine masses, which we combine with the size and luminosity of the galaxies to produce mass-size-luminosity scaling relations. With these scalings we determine that the M31 dSphs are fully consistent with the MW dSphs, suggesting that the well-studied MW satellite population provides a fair sample for broader conclusions. We also estimate dark matter halo masses of the satellites and find that there is no sign that the luminosity of these galaxies depends on their dark halo mass, a result consistent with what is seen for MW dwarfs. Two of the M31 dSphs (And XV, XVI) have estimated maximum circular velocities smaller than 12 km s{sup -1} (to 1{sigma}), which likely places them within the lowest-mass dark matter halos known to host stars (along with Booetes I of the MW). Finally, we use the systemic velocities of the M31 satellites to estimate the mass of the M31 halo, obtaining a virial mass consistent with previous results.

79 ASTRONOMY AND ASTROPHYSICS↗

Partitioning behavior of an acid-cleavable, 1,3-dioxolane alkyl ethoxylate, surfactant in single and binary surfactant mixtures for 2- and 3-phase microemulsion systems according to ethoxylate head group size

Partition coefficients for a pH-degradable 1,3-dioxolane alkyl ethoxylate surfactant, 4-CH{sub 3}O (CH{sub 2}CH{sub 2}O){sub 5.6}-CH{sub 2}, 2,2-(CH{sub 2}){sub 12}CH{sub 3}, 2-(CH{sub 2}) CH{sub 3}, 1,3-dioxolane or ''cyclic ketal'' surfactant, CK-2,13-E{sub 5.6,ave}, between isooctane- and water-rich phases of 2- and 3-phase microemulsion systems (K{sub n}) were determined as functions of the ethoxylate size, n, and temperature for the neat surfactant and its binary surfactant mixtures, to understand the partitioning of alkyl ethoxylates possessing a broad distribution of ethoxylate size and to determine conditions required for formation of 3-phase microemulsion systems at an optimal temperature where phase separation occurs rapidly, important for protein purification via proteins selective partitioning to the middle phase, driven by affinity to the second surfactant of the binary mixture. A semi-empirical thermodynamic mathematical model described the partitioning data well, provided optimal temperature values consistent with phase diagrams and theory, and demonstrated that the tail region of CK-2,13-E{sub 5.6,ave} is more polar than the hydrophobes of fatty alcohol ethoxylates. The addition of Aerosol-OT (AOT) removed the temperature sensitivity of CK-2,13-E{sub 5.6,ave}s partitioning, producing 3-phase microemulsion systems between 20 C and 40 C. Analysis of the bottom phases of the 2- and 3-phase microemulsion systems formed by CK-2,13-E{sub 5.6,ave} via small-angle neutron scattering demonstrated the presence of spherical, monodisperse oil-in-water microemulsions.

59 BASIC BIOLOGICAL SCIENCES↗

TH-A-19A-07: The Effect of Particle Tracking Step Size Limit On Monte Carlo- Computed LET Spectrum of Therapeutic Proton Beams

Purpose: To investigate the effect of charged particle tracking step size limit in the determination of the LET spectrum of therapeutic proton beams using Monte Carlo simulations. Methods: The LET spectra at different depths in a water phantom from a 79.7 MeV spot-scanning proton beam were calculated using Geant4. Five different tracking step limits 0.5 mm, 0.1 mm, 0.05 mm, 0.01 mm and 1 μm were adopted. The field size was set to 10×10 cm{sup 2} on the isocenter plane. A 40×40×6 cm{sup 3} water phantom was modelled as the irradiation target. The voxel size was set to 1×1×0.5 mm{sup 3} to obtain high resolution results. The LET spectra were scored ranging from 0.01 keV/μm to 10{sup 4}keV/μm in the logarithm scale. In addition, the proton energy spectra at different depths were also scored. Results: The LET spectra calculated using different step size limits were compared at four depths along the Bragg curve. At any depths, the spread of the LET spectra increases with the decrease of step size limit. In the dose buildup region (z = 1.9 cm) and in the region proximal to the Bragg peak (z = 3.95 cm), the frequency mean LET does not vary with decreasing step size limit. At Bragg peak (z = 4.75 cm) and in the distal edge (z = 4.85 cm), frequency mean LET decreases with decreasing step size limit. The energy spectrum at any specified depths does not vary with the step size limit. Conclusion: The calculated LET has a spectral distribution rather than a single value at any depths along the Bragg curve and the spread of the computed spectrum depends on the tracking step limit. Incorporating the LET spectrum distribution into the robust IMPT optimization plan may provide more accurate biological dose distribution than using the dose- or fluence-averaged LET. NIH Program Project Grant P01CA021239.

07 ISOTOPE AND RADIATION SOURCES↗

A laboratory study to estimate pore geometric parameters of sandstones using complex conductivity and nuclear magnetic resonance for permeability prediction

Here, we estimate parameters from the Katz and Thompson permeability model using laboratory complex electrical conductivity (CC) and nuclear magnetic resonance (NMR) data to build permeability models parameterized with geophysical measurements. We use the Katz and Thompson model based on the characteristic hydraulic length scale, determined from mercury injection capillary pressure estimates of pore throat size, and the intrinsic formation factor, determined from multisalinity conductivity measurements, for this purpose. Two new permeability models are tested, one based on CC data and another that incorporates CC and NMR data. From measurements made on forty-five sandstone cores collected from fifteen different formations, we evaluate how well the CC relaxation time and the NMR transverse relaxation times compare to the characteristic hydraulic length scale and how well the formation factor estimated from CC parameters compares to the intrinsic formation factor. We find: (1) the NMR transverse relaxation time models the characteristic hydraulic length scale more accurately than the CC relaxation time (R 2 of 0.69 and 0.33 and normalized root mean square errors (NRMSE) of 0.16 and 0.21, respectively); (2) the CC estimated formation factor is well correlated with the intrinsic formation factor (NRMSE50.23). We demonstrate that that permeability estimates from the joint-NMR-CC model (NRMSE50.13) compare favorably to estimates from the Katz and Thompson model (NRMSE50.074). Lastly, this model advances the capability of the Katz and Thompson model by employing parameters measureable in the field giving it the potential to more accurately estimate permeability using geophysical measurements than are currently possible.

36 MATERIALS SCIENCE↗

Turbulent Flux Measurements of the Near‐Surface and Residual‐Layer Small Particle Events

Abstract According to recent field studies, almost half of the New Particle Formation (NPF) events occur aloft, in a residual layer, near the top of the boundary layer. Therefore, measurements of the meteorological parameters, precursor gas concentrations, and aerosol loadings conducted at the ground level are often not representative of the conditions where the NPFs take place. This paper presents new measurements obtained during the Turbulent Flux Measurements of the Residual Layer Nucleation Particles, conducted at the Southern Great Plains research site. Vertical turbulent fluxes of 3–10 nm‐sized particles were measured using a sonic anemometer and two condensation particle counters with nominal cutoff diameters of 3 nm and 10 nm mounted at the top of the 10‐m telescoping tower. Aerosol number size distribution (5–300 nm) was determined through the ground‐based Scanning Mobility Particle Sizers. The size selected (15–50 nm) particle hygroscopicity was derived with the Humidified Tandem Differential Mobility Analyzer. The ground level observations were supplemented by vertically‐resolved measurements of horizontal and vertical wind speeds and aerosol backscatter. The data analysis suggests that (a) turbulent flux measurements of 3–10 nm particles can distinguish between near‐surface and residual‐layer small particle events; (b) sub‐50 nm particles had a hygroscopicity value of 0.2, suggesting that organic compounds dominate atmospheric nanoparticle chemical composition at the site; and (c) current methodologies are inadequate for estimating the dry deposition velocity of sub‐10 nm particles because it is not feasible to measure particle concentration very near the surface, in the diffusion sublayer.

54 ENVIRONMENTAL SCIENCES↗

Size effect on the electronic and optical band gap of CdSe QD

Present paper deals with a critical and comprehensive analysis of the dependence of photo emission (PE) electronic band gap and optical absorption (OA) excitonic band gap on the size of CdSe QD, via connecting it with excitonic absorbance wavelength. Excitonic absorbance wavelength is determined through an empirical fit of established experimental evidences. Effective excitonic charge and Bohr radius is determined as a function of size. Increase in size of the CdSe QD results in greater Bohr radius and smaller effective excitonic charge. Excitonic binding energy as a degree of size of QD is also calculated which further relates with the difference in PE electronic and OA optical band gaps. It is also shown that with increase in size of CdSe QD, the excitonic binding energy decreases which consequently increases differences in two band gaps. Our results are very well comparable with the established results. Explanation for the origin of the unusual optical properties of CdSe QD has been also discussed.

36 MATERIALS SCIENCE↗

Nonlinear dynamics of continuously measured Bose-Einstein condensates in one-dimensional harmonic traps

Continuous center-of-mass position measurements performed on an interacting harmonically trapped Bose-gas are considered. Using both a semianalytical mean-field approach and a completely quantum numerical technique based on the positive P representation, it is demonstrated that the atomic delocalization due to the measurement backaction is smaller for a strongly interacting gas. The numerically calculated second-order correlation functions demonstrate the appearance of atomic bunching as a result of the center-of-mass measurement. Although rather small, the bunching is also present for a strongly interacting gas, which is in contrast with the case of an unperturbed gas. The performed analysis allows us to speculate that, for relatively strong interactions, the size of the atomic cloud determined with a single snapshot measurement can become smaller than the ground-state cloud size.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Assessment of In-situ Proppant Placement in SRV Using Through-Fracture Core Sampling at HFTS

The primary aim of this study was to develop robust methods aimed at detecting and quantifying the subsurface proppant distribution as it relates to the completed wells in both the upper and the middle Wolfcamp formations at the HFTS site. There were two sources of proppant deemed useful for this task. The first source was the actual scrapings from the fracture faces that were collected during the core description work. The second sample source was the scrapings and sludge from the cut core tubes collected during core handling. This study highlights the analysis done on the second set of sludge samples. Apart from developing a method for detection and quantification of proppant and other particles contained within this sludge, the study was aimed at the following broad objectives: Determine the spatial distribution of proppant in the created SRV along the cored interval, including size distribution and proppant concentration. Determine if pay zones of interest are sufficiently propped/ stimulated. Determine if fracture and cluster spacing is optimal for thorough lateral reservoir coverage. Determine if well spacing is optimal based on propped SRV length.

Maity, Debotyam↗

Advancements in the Representation of Cloud-Aerosol Microphysics in the GEOS-5 AGCM

Despite numerous challenges, the physical parameterization of cloud-aerosol interactions in atmospheric GCMs has become a top priority for advancement because of our need to simulate and understand past, current, and future indirect effects of aerosols on clouds. The challenges stem from the involvement of wide range of cloud-scale dynamics and aerosol activation physical processes. Cloud dynamics modulate cloud areal extent and condensate, while aerosol activation depends on aerosol mass load, size distribution, internal mixing state, and nucleating properties, and ultimately determines cloud optical properties via particle sizes. Both macro- and micro-scale processes are obviously important for cloud-radiation interactions. We will present the main features of cloud microphysical properties in the GEOS- 5 Atmospheric GCM (AGCM) as simulated by the McRAS-AC (Microphysics of Clouds with Relaxed Arakawa-Schubert and Aerosol-Cloud interaction) scheme. McRAS-AC uses Fountoukis and Nenes (2005) aerosol activation for liquid clouds, and has an option for either Liu and Penner (2005) or Barahona and Nenes (2008, 2009) aerosol activation for ice clouds. Aerosol loading (on-line or climatological) comes from GOCART, with an assumed log-normal size distribution. Other features of McRAS-AC are level-by-level cloud-scale thermodynamics, and Seifert-Beheng (2001)-type precipitation microphysics, particularly from moist convection. Results from Single-Column Model simulations will be shown to demonstrate how cloud radiative properties, lifetimes, and precipitation are influenced by different parameterization assumptions. Corresponding fields from year-long simulations of the full AGCM will also be presented with geographical distributions of cloud effective particle sizes compared to satellite retrievals. While the primary emphasis will be on current climate, simulation results with perturbed aerosol loadings will also be shown to expose the radiative sensitivity of the microphysical parameterization.

Lee, D.↗

Anomaly detection with spiking neural networks

Detecting anomalies with a spiking neural network is provided. An input layer receives a number of inputs and converts them into phase-coded spikes, wherein each input is contained within a number of progressively larger neighborhoods of surrounding inputs. From the phase-coded spikes, a median value of each input is computed for each size neighborhood. An absolute difference of each input from its median value is computed for each size neighborhood. A median absolute difference (MAD) of each input is computed for each size neighborhood. For each input, an adaptive median filter (AMF) determines if a MAD for any size neighborhood exceeds a respective threshold. If one or more neighborhoods exceeds its threshold, the AMF outputs the median value of the input for the smallest neighborhood. If none of the neighborhoods exceeds the threshold, the AMF outputs the original value of the input.

Verzi, Stephen Joseph↗

Renal Artery Embolization Combined With Radiofrequency Ablation in a Porcine Kidney Model: Effect of Small and Narrowly Calibrated Microparticles as Embolization Material on Coagulation Diameter, Volume, and Shape

The purpose of this study was to evaluate the effect of renal artery embolization with small and narrowly calibrated microparticles on the coagulation diameter, volume, and shape of radiofrequency ablations (RFAs) in porcine kidneys. Forty-eight RFAs were performed in 24 kidneys of 12 pigs. In 6 animals, bilateral renal artery embolization was performed with small and narrowly calibrated microparticles. Upper and lower kidney poles were ablated with identical system parameters. Applying three-dimensional segmentation software, RFAs were segmented on registered 2 mm-thin macroscopic slices. Length, depth, width, volume{sub s}egmented, and volume{sub c}alculated were determined to describe the size of the RFAs. To evaluate the shape of the RFAs, depth-to-width ratio (perfect symmetry-to-lesion length was indicated by a ratio of 1), sphericity ratio (perfect sphere was indicated by a sphericity ratio of 1), eccentricity (perfect sphere was indicated by an eccentricity of 0), and circularity (perfect circle was indicated by a circularity of 1) were determined. Embolized compared with nonembolized RFAs showed significantly greater depth (23.4 {+-} 3.6 vs. 17.2 {+-} 1.8 mm; p < 0.001) and width (20.1 {+-} 2.9 vs. 12.6 {+-} 3.7 mm; p < 0.001); significantly larger volume{sub s}egmented (8.6 {+-} 3.2 vs. 3.0 {+-} 0.7 ml; p < 0.001) and volume{sub c}alculated (8.4 {+-} 3.0 ml vs. 3.3 {+-} 1.1 ml; p < 0.001); significantly lower depth-to-width (1.17 {+-} 0.10 vs. 1.48 {+-} 0.44; p < 0.05), sphericity (1.55 {+-} 0.44 vs. 1.96 {+-} 0.43; p < 0.01), and eccentricity (0.84 {+-} 0.61 vs. 1.73 {+-} 0.91; p < 0.01) ratios; and significantly greater circularity (0.62 {+-} 0.14 vs. 0.45 {+-} 0.16; p < 0.01). Renal artery embolization with small and narrowly calibrated microparticles affected the coagulation diameter, volume, and shape of RFAs in porcine kidneys. Embolized RFAs were significantly larger and more spherical compared with nonembolized RFAs.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Stellar diameters and temperatures. IV. Predicting stellar angular diameters

The number of stellar angular diameter measurements has greatly increased over the past few years due to innovations and developments in the field of long baseline optical interferometry. We use a collection of high-precision angular diameter measurements for nearby, main-sequence stars to develop empirical relations that allow the prediction of stellar angular sizes as a function of observed photometric color. These relations are presented for a combination of 48 broadband color indices. We empirically show for the first time a dependence on metallicity of these relations using Johnson (B – V) and Sloan (g – r) colors. Our relations are capable of predicting diameters with a random error of less than 5% and represent the most robust and empirical determinations of stellar angular sizes to date.

79 ASTRONOMY AND ASTROPHYSICS↗

"Depth-Profiling" and Quantitative Characterization of the Size, Composition, Shape, Density, and Morphology of Fine Particles with SPLAT, a Single-Particle Mass Spectrometer

A significant fraction of atmospheric particles are composed of inorganic substances that are mixed or coated with organics. The behavior of these particles depends on the particle internal composition and on the arrangement of the specific constituents in each particle. It is important to know which constituent is on the surface and whether it entirely covers the particle surface. We present a study that demonstrates that an instrumental system that includes an ultra-sensitive single particle mass spectrometer that is coupled with a differential mobility analyzer can be used to quantitatively measure in real-time individual particle composition, size, density, shape and determine which substance is on the surface and whether it entirely covers the particle. Here we use liquid dioctyl phthalate to coat NaCl seeds and generate spherical particles that are encapsulated with the organic coat and pyrene, a solid poly aromatic hydrocarbon, to produce aspherical particles with pyrene nodules and exposed NaCl cores. We show that the behavior of the mass spectral intensities as a function of laser fluence yields information that can be used to determine the morphological distribution of individual particles constituents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗