Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Natural CO 2 accumulations in the western Williston Basin: A mineralogical analog for CO 2 injection at the Weyburn site

The Devonian carbonates of the Duperow Formation on the western flank of the Williston Basin in southwest Saskatchewan contain natural accumulations of CO 2 , and may have done so for as long as 50 million years. These carbonate sediments are characterized by a succession of carbonate cycles capped by anhydrite-rich evaporites that are thought to act as seals to fluid migration. The Weyburn CO 2 injection site lies 400 km to the east in a series of Mississippian carbonates that were deposited in a similar depositional environment. That long-term isolation of natural CO 2 can be accomplished within carbonate strata has motivated the investigation of the Duperow rocks as a potential natural analog for storage of anthropogenic CO 2 in carbonate lithologies. For the Duperow strata to represent a legitimate analog for Midale injection and storage, the similarity in lithofacies, whole rock compositions, mineral compositions and porosity with the Midale Beds must be established. Here we compare lithofacies, whole rock compositions, mineralogy and mineral compositions from both locales. The major mineral phases at both locales are calcite, dolomite and anhydrite. In addition, accessory pyrite, fluorite, quartz and celestine (strontium sulfate) are also observed. Dawsonite, a potential CO 2 -trapping mineral, is not observed within the CO 2 -bearing horizons of the Duperow Formation, however. The distribution of porosity in the Midale Vuggy units is similar to that of the Duperow Formation, but the Marly units of the Midale have significantly higher porosity. The Duperow Formation is topped by the Dinesmore evaporite that is rich in anhydrite, and often contains authigenic K-feldspar. The chemistry of dolomite and calcite from the two localities also overlaps. Silicate minerals are in low abundance (<3%) within the analyzed Duperow samples, with quartz and K-feldspar the only silicates observed petrographically or in X-ray diffraction patterns. The Midale Beds contain significantly higher silica/silicate concentrations (Durocher et al., 2003), but the paucity of mono- and divalent cations that can be derived from dissolution of these silicate minerals likely precludes significant carbonate mineral formation. Therefore physical and solution trapping are likely to be the primary CO 2 trapping mechanisms at both sites.

58 GEOSCIENCES↗

Transition state stabilization depends on solvent identity, pore size, and hydrophilicity for epoxidations in zeolites

Ti-silicates activate H 2 O 2 to form Ti-hydroperoxo and Ti-peroxo intermediates that can react with alkenes to form epoxide products. Comparisons of kinetics for 1-octene epoxidation with H 2 O 2 on Ti-BEA and Ti-MFI catalysts with different hydrophilicities in methanol (CH 3 OH) or acetonitrile (CH 3 CN) solvents show the significance of the solvent for stabilizing catalytically-relevant species and the complex interdependencies between solvent, catalyst topology, and hydrophilicity. Epoxidation turnover rates are higher in CH 3 CN than CH 3 OH for Ti-BEA, but the opposite trend is observed for Ti-MFI. Ti-silicates with greater silanol densities, however, give greater epoxidation turnover rates than their hydrophobic counterparts in both solvents. Kinetic, spectroscopic, and thermodynamic analyses show that differences in turnover rates mainly arise from changes in the stabilization of reactive surface species by solvent mediated interactions, because the mechanism of the reaction and stability of the fluid-phase reactants remain similar in CH 3 CN and CH 3 OH. Specifically, apparent activation free energy values ($ΔG^{‡}_{App}$) indicate that surface intermediates responsible for alkene epoxidation are stabilized to a greater extent in CH 3 CN on Ti-BEA and in CH 3 OH on Ti-MFI. Hydrophilic Ti-silicates present lower ($ΔG^{‡}_{App}$) values regardless of solvent identity, which suggests that these differences correspond to the number of hydrogen-bonding solvent molecules found near reactive species bound to Ti active sites. Finally, taken together, these findings demonstrate the role of solvent molecules in allowing reactive intermediates to recognize the properties of active sites beyond the length-scale of covalent bonds, which carry implications for epoxidation but also other reactions within solvent-filled pores of microporous materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of flow on uranium speciation in soils impacted by acidic waste fluids

Radioactive acidic liquid waste is a common byproduct of uranium (U) and plutonium (Pu) enrichment and recycling processes whose accidental and planned release has led to a significant input of U into soils and sediments across the world, including at the U.S. DOE's Hanford site (WA, USA). Because of the particularly hazardous nature of U, it is important to predict its speciation when introduced into soils and sediments by acidic waste fluids. Of fundamental importance are the coupled effects of acid-driven mineral transformation and reactive transport on U speciation. To evaluate the effect of waste-fluid residence time and co-associated dissolved phosphate concentrations on U speciation in impacted soils and sediments, uncontaminated surface materials (from the Hanford Site) were reacted with U-containing synthetic acidic waste fluids (pH 2) amended with dissolved phosphate concentrations in both batch (no flow) and flow-through column systems for 7–365 days. By comparing dissolved U behavior and solid phase speciation as a function of flow regimen, we found that the availability of proton-promoted dissolution products (such as Si) to sequester U into uranyl silicates was dependent on waste fluid-sediment contact time as uranyl silicates were not detected in short contact time flow-through systems but were detected in no-flow, long contact time, reactors. Moreover, the dominance of uranyl phosphate as neoprecipitate U scavenger (principally in the form of meta-ankoleite) in phosphate amended systems confirmed the importance of phosphate amendments for an efficient sequestration of U in the soils and sediments. Overall, our experiments suggest that the formation of uranyl silicates in soils impacted by acidic waste fluids is likely to be limited unless reaction products are allowed to accumulate in soil pores, highlighting the importance of investigating soil U speciation in flow-through, transport-driven systems as opposed to no-flow, batch systems. Finally, this study provides insights into uranium speciation and its potential changes under acidic conditions for better prediction of risks and subsequent development of efficient remediation strategies.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Water dynamics in C–S–H and M-S-H cement pastes: A revised jump-diffusion and rotation-diffusion model

The Quasi-Elastic Neutron Scattering (QENS) spectra from four cement pastes are re-analyzed by a new revised jump-diffusion and rotation-diffusion model (rJRM). From the QENS fit, it can be seen that the rJRM is an improved model to fit QENS spectra within the whole detected neutron energy transfer and scattering vector. By the rJRM fitting, the structure parameters extracted from QENS spectra show that both the additives aluminum-silicate nanotubes (ASN) and carboxyl group functionalized ASN (ASN-COOH) can improve magnesium-silicate-hydrate (M-S-H) toward calcium-silicate-hydrate (C–S–H) direction in mechanical properties, but the improvement is weakened with decreasing temperatures. The extracted dynamical parameters show that there is a dynamic anomaly near 230 K in not only translational but also rotational diffusion of water confined in all the investigated samples. In conclusion, the anomaly in rotational diffusion is new compared with those results obtained by the QENS fit using other models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rapid Crystallization of Zeolites with Controllable Defects: Disentangling Fluoride Concentration and pH Using NH 4 F

Zeolite synthesis is typically conducted either under basic conditions or in neutral fluoride media using hydrofluoric acid (HF). While basic (OH − ) conditions generally result in faster zeolite crystallization, they can also increase the likelihood of framework defects and crystal intergrowths. In contrast, synthesis in neutral fluoride media tends to produce fewer defects because fluoride balances positive charges from structure-directing agents. However, this method often requires significantly longer crystallization times and involves the handling of dangerous HF. In the present study, we pursue the best of both synthesis conditions, rapid syntheses with controllable defect concentrations, by disentangling of mineralizing agent and chargebalancing agent using ammonium fluoride (NH 4 F) as an alternative to HF. We have investigated the use of NH 4 F in the syntheses of siliceous and aluminum-containing zeolite A (LTA, small pore), ZSM-5 (MFI, medium pore), and siliceous Beta(*BEA, large pore). The crystallization times of all four zeolites decreased substantially with an increasing NH 4 F concentration. Crystallization times were reduced from 24 to 4 h (Si-LTA), 96 to 36 h (Al-LTA), 240 to 6 h (ZSM-5), and 24 to 3 h (Si-*BEA). Additionally, increasing the NH 4 F concentration in the synthesis mixtures decreases the defect densities of siliceous zeolites. Raman spectroscopy, along with 29 Si MAS NMR, 19 F MAS NMR, 13 C MAS NMR, and fluorine elemental analysis of Si-LTA samples confirms that the reduction in charged defects (Si−O − ) is due to the higher incorporation of F − within the double four-membered ring (D4R) present in the LTA samples. We show that the accelerated crystallization is due to the role of F − in enhancing the silica mineralization rate (formation of silicon hexafluoride species) and stabilizing D4Rs under basic conditions. As a result, combining basic and fluoride-mediated synthesis could therefore be advantageous for faster zeolite production and improved control over structural properties for a wide variety of zeolite structures.

Anions↗

Isotopic Constraints on the Nature of Primary Precipitates in Archean–Early Paleoproterozoic Iron Formations from Determinations of the Iron Phonon Density of States of Greenalite and 2L- and 6L-Ferrihydrite

Iron formations (IFs) are chemical sedimentary rocks that were widely deposited before the Great Oxidation Event (GOE) around 2.4- 2.2 Ga. It is generally thought that IFs precipitated as hydrated Fe 3+ oxides (HFOs) such as ferrihydrite following surface oxidation of Fe 2+ -rich, anoxic deep waters. This model often implicates biological oxidation and underpins reconstructions of marine nutrient concentrations. However, nanoscale petrography indicates that an Fe 2+ silicate, greenalite, is a common primary mineral in well-preserved IFs, motivating an alternative depositional model of anoxic ferrous silicate precipitation. It is unclear, however, if Fe 2+ -rich silicates can produce the Fe isotopic variations in IFs that are well explained by Fe 2+ oxidation. To address this question, we constrain the equilibrium Fe isotopic ( 56 Fe/ 54 Fe) fractionation of greenalite and ferrihydrite by determining the iron phonon densities of states for those minerals. Here, we use ab initio density functional theory (DFT + U) calculations and nuclear resonant inelastic X-ray scattering spectroscopy to show that ferrous greenalite should be isotopically lighter than ferrihydrite by similar to 1-1.2 parts per thousand at equilibrium, and fractionation should scale linearly with increasing Fe 3+ content in greenalite. By anchoring ferrihydrite-greenalite mineral pair fractionations to published experimental Fe isotopic fractionations between HFOs and aqueous Fe 2+ , we show that ferrous greenalite may produce all but the heaviest pre-GOE Fe isotopic compositions and mixed valence greenalites can produce the entire record. Our results suggest that heavy Fe isotope enrichments alone are not diagnostic of primary IF mineralogies, and ferrihydrite and partially oxidized or even purely ferrous greenalite are all viable primary IF mineralogies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering Calcium-Bearing Mineral/Hydrogel Composites for Effective Phosphate Recovery

Effectively recovering phosphate from wastewater streams and reutilizing it as a nutrient will critically support sustainability. Here, to capture aqueous phosphate, we developed novel mineral-hydrogel composites composed of calcium alginate, calcium phosphate (CaP), and calcium silicate (CSH) (CaP + CSH/Ca-Alg). The CaP + CSH/Ca-Alg composites were synthesized by dripping a sodium alginate (Na-Alg) solution with ionic precursors into a calcium chloride bath. To change the mineral seed’s properties, we varied the calcium bath concentrations and the ionic precursor (sodium dibasic phosphate (NaH 2 PO 4 ) and/or sodium silicate (Na 2 SiO 3 )) amounts and their ratios. The added CSH in the mineral-hydrogel composites resulted in the release of calcium and silicate ions in phosphate-rich solutions, increasing the saturation ratio with respect to calcium phosphate within the mineral-hydrogel composites. The CSH addition to the mineral-hydrogel composites doubled the phosphate removal rate while requiring lesser initial amounts of Ca and P materials for synthesis. Furthermore, by incorporating both CSH and CaP mineral seeds in composites, we achieved a final concentration of 0.25 mg-P/L from an initial 6.20 mg-P/L. Moreover, the mineral-hydrogel composites can remove phosphate even under CaP undersaturated conditions. This suggests their potential to be a widely applicable and environmentally-sustainable treatment and recovery method for nutrient-rich wastewater.

42 ENGINEERING↗

The Lithophile Element Budget of Earth's Core

Abstract The relative composition of Earth's core and mantle were set during core formation. By determining how elements partition between metal and silicate at high pressures and temperatures, measurements of the mantle composition and geophysical observations of the core can be used to understand the mechanisms by which Earth formed. Here we present the results of metal‐silicate partitioning experiments for a range of nominally lithophile elements (Al, Ca, K, Mg, O, Si, Th, and U) and S to 85 GPa and up to 5400 K. With our results and a compilation of literature data, we developed a parameterization for partitioning that accounts for compositional dependencies in both the metal and silicate phases. Using this parameterization in a range of planetary growth models, we find that, in general, lithophile element partitioning into the metallic phase is enhanced at high temperatures. The relative abundances of FeO, SiO 2 , and MgO in the mantle vary significantly between planetary growth models, and the mantle abundances of these elements can be used to provide important constraints on Earth's accretion. To match Earth's core mass and mantle composition, Earth's building blocks must have been enriched in Fe and depleted in Si compared with CI chondrites. Finally, too little Mg, Si, and O are partitioned into the core for precipitation of oxides to be a major source of energy for the geodynamo. In contrast, several ppb of U can be partitioned into the core at high temperatures, and this energy source must be accounted for in thermal evolution models.

Chidester, B. A.↗

The Oxidation State of Sulfur in Apatite of Martian Meteorite—Shergotty

Apatite can incorporate sulfur in its reduced form (S 2− ) when apatite equilibrates with a silicate melt under reducing conditions. Incorporation of sulfate (S 6+ ) has been observed in terrestrial apatite under oxidizing conditions. Thus, it has been suggested that the proportions of S 6+ /S 2− in apatite may record the oxygen fugacity ( f O 2 ) during the formation and/or equilibration of apatite grains with a silicate melt in a wide variety of igneous and metamorphic rocks, including from Earth, Mars, the Moon, and in materials from the asteroid belt. Martian rocks, which record f O 2 values intermediate between those recorded by rocks from the Moon and Earth, may have apatite that contains only S 2− or mixtures of S 6+ and S 2− . Here, we present new measurements of the oxidation state of sulfur in apatite grains in the basaltic shergottite, Shergotty, which exhibits spectral features consistent with the presence of sulfide (S 2− ) structurally bound in apatite, and no evidence for the presence of sulfite (S 4+ ) or sulfate (S 6+ ). Further, the presence of sulfide-only apatite in Shergotty is consistent with other mineralogical records of f O 2 in this meteorite, which are calculated from other late-stage crystallizing phases like Fe-Ti oxides as well as from early crystallizing phases like clinopyroxene ( D Eu Cpx/melt ) of ΔIW + 1.9 to ΔIW + 3.5. At these f O 2 values, S is present in silicate melts as only S 2− , and this suggests that the oxidation state of sulfur records and preserves the f O 2 during the igneous crystallization of apatite reinforcing the idea that sulfur in apatite can be used as an igneous oxybarometer.

58 GEOSCIENCES↗

A nucleosynthetic origin for the Earth’s anomalous 142Nd composition

A long-standing paradigm assumes that the chemical and isotopic compositions of many elements in the bulk silicate Earth are the same as in chondrites(1-4). But, the accessible Earth has a greater Nd-142/Nd-144 ratio than do chondrites. Because Nd-142 is the decay product of the now-extinct Sm-146 (which has a half-life of 103 million years(5)), this Nd-142 difference seems to require a higher-than-chondritic Sm/Nd ratio for the accessible Earth. This must have been acquired during global silicate differentiation within the first 30 million years of Solar System formation(6) and implies the formation of a complementary Nd-142-depleted reservoir that either is hidden in the deep Earth(6), or lost to space by impact erosion(3,7). Whether this complementary reservoir existed, and whether or not it has been lost from Earth, is a matter of debate(3,8,9), and has implications for determining the bulk composition of Earth, its heat content and structure, as well as for constraining the modes and timescales of its geodynamical evolution(3,7,9,10). We show that, compared with chondrites, Earth's precursor bodies were enriched in neodymium that was produced by the slow neutron capture process (s-process) of nucleosynthesis. This s-process excess leads to higher Nd-142/Nd-144 ratios; after correction for this effect, the Nd-142/Nd-144 ratios of chondrites and the accessible Earth are indistinguishable within five parts per million. The Nd-142 offset between the accessible silicate Earth and chondrites therefore reflects a higher proportion of s-process neodymium in the Earth, and not early differentiation processes. Our results obviate the need for hidden-reservoir or super-chondritic Earth models and imply a chondritic Sm/Nd ratio for the bulk Earth. Although chondrites formed at greater heliocentric distances and contain a different mix of presolar components than Earth, they nevertheless are suitable proxies for Earth's bulk chemical composition.

58 GEOSCIENCES↗

Understanding the Stability of Salt-Inclusion Phases for Nuclear Waste-forms through Volume-based Thermodynamics

Abstract Formation enthalpies and Gibbs energies of actinide and rare-earth containing SIMs with silicate and germanate frameworks are reported. Volume-based thermodynamics (VBT) techniques complemented by density functional theory (DFT) were adapted and applied to these complex structures. VBT and DFT results were in closest agreement for the smaller framework silicate structure, whereas DFT in general predicts less negative enthalpies across all SIMs, regardless of framework type. Both methods predict the rare-earth silicates to be the most stable of the comparable structures calculated, with VBT results being in good agreement with the limited experimental values available from drop solution calorimetry.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Mass spectral molecular mapping shows benefits of thermal evaporation in prelithiated silicon-based electrodes

Silicon based composites have become increasingly popular as potential anodes for lithium-ion batteries due to their large storage capacity and potential ability to generate batteries with energy densities greater than 350 Wh kg −1 . These anodes often see reduced initial columbic efficiency (ICE) due to disruptive volume expansionup to 300% and continuous solid electrolyte interphase (SEI) layer formation. Prelithiation, where an excess reservoir of Li is added to the electrode to compensate for irreversible SEI formation losses during their sample preparation, has proven to solve the issue of immediate capacity loss. Thermal evaporation is a prelithiation technique with limited studies on its effectiveness. In this study, time-of-flight secondary ion mass spectrometry (ToF-SIMS) is used to highlight the benefits of prelithiation via thermal evaporation. ToF-SIMS provides chemical mapping and spatial information in 2D and 3D visualizing the deposition of lithium, identifying Li x Si y alloy and Li x Si y O z silicate formation, and the distribution of lithium passivation into the electrodes. Passivation under different atmospheric conditions, such as inert Argon (Ar) and Ar/ carbon dioxide (CO 2 ), highlights the impact of the environment on the passivation effectiveness and formation of Li x Si y alloy and Li x Si y O z silicate. The ToF-SIMS molecular imaging and depth profiling results indicate that prelithiation via thermal evaporation effectively distributes lithium throughout the depth profile thickness of several hundred nanometers. It induces a greater degree of Li x Si y O z silicate formation over Li x Si y alloy. Our ToF-SIMS characterization results show the effectiveness of thermal evaporation in producing a more stable electrode and an electrode with an effective lithium reserve that can preserve its capacity.

Parker, Gabriel D. [Oak Ridge National Laboratory ↗

Potassic, High-Silica Hadean Crust.

Understanding Hadean(>4 Ga) Earth requires knowledge of its crust. The composition of the crust and volatiles migrating through it directly influence the makeup of the atmosphere, the composition of seawater, and nutrient availability. Despite its importance, there is little known and less agreed upon regarding the nature of the Hadean crust. By analyzing the Sr-87/Sr-86 ratio of apatite inclusions in Archean zircons from Nuvvuagittuq, Canada, we show that its protolith had formed a high (>1) Rb/Sr ratio reservoir by at least 4.2 Ga. This result implies that the early crust had a broad range of igneous rocks, extending from mafic to highly silicic compositions

early Earth↗

Interstellar and ejecta dust in the cas a supernova remnant

Infrared continuum observations provide a means of investigating the physical composition of the dust in the ejecta and swept up medium of the Cas A supernova remnant (SNR). Using low-resolution Spitzer IRS spectra (5-35 μm), and broad-band Herschel PACS imaging (70, 100, and 160 μm), we identify characteristic dust spectra, associated with ejecta layers that underwent distinct nuclear burning histories. The most luminous spectrum exhibits strong emission features at ∼9 and 21 μm and is closely associated with ejecta knots with strong Ar emission lines. The dust features can be reproduced by magnesium silicate grains with relatively low Mg to Si ratios. Another dust spectrum is associated with ejecta having strong Ne emission lines. It has no indication of any silicate features and is best fit by Al{sub 2}O{sub 3} dust. A third characteristic dust spectrum shows features that are best matched by magnesium silicates with a relatively high Mg to Si ratio. This dust is primarily associated with the X-ray-emitting shocked ejecta, but it is also evident in regions where shocked interstellar or circumstellar material is expected. However, the identification of dust composition is not unique, and each spectrum includes an additional featureless dust component of unknown composition. Colder dust of indeterminate composition is associated with emission from the interior of the SNR, where the reverse shock has not yet swept up and heated the ejecta. Most of the dust mass in Cas A is associated with this unidentified cold component, which is ≲ 0.1 M {sub ☉}. The mass of warmer dust is only ∼0.04 M {sub ☉}.

79 ASTRONOMY AND ASTROPHYSICS↗

Mid-infrared properties of luminous infrared galaxies. II. Probing the dust and gas physics of the goals sample

The Great Observatories All-sky LIRG Survey (GOALS) is a comprehensive, multiwavelength study of luminous infrared galaxies (LIRGs) in the local universe. Here, we present the results of a multi-component, spectral decomposition analysis of the low-resolution mid-infrared (MIR) Spitzer Infrared Spectrograph spectra from 5-38 μm of 244 LIRG nuclei. The detailed fits and high-quality spectra allow for characterization of the individual polycyclic aromatic hydrocarbon (PAH) features, warm molecular hydrogen emission, and optical depths for both silicate dust grains and water ices. We find that starbursting LIRGs, which make up the majority of the GOALS sample, are very consistent in their MIR properties (i.e., τ{sub 9.7μm}, τ{sub ice}, neon line ratios, and PAH feature ratios). However, as their EQW{sub 6.2{sub μm}} decreases, usually an indicator of an increasingly dominant active galactic nucleus (AGN), LIRGs cover a larger spread in these MIR parameters. The contribution from PAH emission to the total IR luminosity (L(PAH)/L(IR)) in LIRGs varies from 2%-29% and LIRGs prior to their first encounter show significantly higher L(PAH)/L(IR) ratios on average. We observe a correlation between the strength of the starburst (represented by IR8 = L{sub IR}/L{sub 8{sub μm}}) and the PAH fraction at 8 μm but no obvious link between IR8 and the 7.7 to 11.3 PAH ratio, suggesting that the fractional photodissociation region (PDR) emission, and not the overall grain properties, is associated with the rise in IR8 for galaxies off the starburst main sequence. We detect crystalline silicate features in ∼6% of the sample but only in the most obscure sources (s{sub 9.7{sub μm}} < –1.24). Ice absorption features are observed in ∼11% (56%) of GOALS LIRGs (ULIRGs) in sources with a range of silicate depths. Most GOALS LIRGs have L(H{sub 2})/L(PAH) ratios elevated above those observed for normal star-forming galaxies and exhibit a trend for increasing L(H{sub 2})/L(PAH) ratio with increasing L(H{sub 2}). While star formation appears to be the dominant process responsible for exciting the H{sub 2} in most of the GOALS galaxies, a subset of LIRGs (∼10%) shows excess H{sub 2} emission that is inconsistent with PDR models and may be excited by shocks or AGN-induced outflows.

79 ASTRONOMY AND ASTROPHYSICS↗

The origin of the heterogeneous distribution of bismuth in aluminosilicate laser glasses

Abstract As one kind of novel and burgeoning laser materials, bismuth‐doped silicate glasses have aroused increasing attention for the super broadband near‐infrared (NIR) emission. However, the large optical scattering loss, resulting from optical heterogeneity in glass color and refractive index, limits their further applications in telecommunication system. Thus, it is urgent to uncover the essence of heterogeneity in Bi‐doped silicate glasses and subsequently improve glass optical performance. It will give us some hint to homogenize the glass component and Bi active centers so as to boost the development of Bi‐based glass materials. Here, taking 1 typical Bi‐doped calcium aluminosilicate glass as an example, we revealed the origin of the optical heterogeneities in glass color and refractive index through the NIR emission spectra, electron probe microanalyzer (EPMA) of elements and X‐ray photoelectron spectroscopy (XPS) of Bi 4f 5/2 , Bi 4f 7/2 , and Al 2p. The inhomogeneous distribution of Bi and aluminum components is responsible for the heterogeneity in this glass system. In addition, we found that tetrahedral coordinated aluminum favors the existence of Bi NIR centers, consequently resulting in enhanced Bi NIR emissions. Furthermore, based on our results and the role of Al 3+ in glass network, we demonstrate the homogenizing of glass component by finely tuning glass composition. This work will enrich the understanding of Bi‐doped laser glass and provide a guideline for the design of component‐derived Bi‐doped silicate glasses and fibers with efficient NIR emission and high optical quality.

Li, Xiaoman↗

Dissolution of silica component of glass network at early stage of corrosion in initially silica-saturated solution

Corrosion of glass in silica-saturated solution has been performed with the assumption that dissolution of silicate species from the glass network would not occur. Using surface-sensitive analytical techniques, we report experimental evidence suggesting the dissolution of silicate network species from a model nuclear waste glass, called international simple glass (ISG), in an aqueous solution initially saturated with soluble silica species. Results from low energy ion scattering and X-ray photoelectron spectroscopy reveal a complete depletion of mobile element species (B, Na) from the ISG surface and an enrichment of Zr on the outmost surface. In support of spectroscopic analyses, results from topographic imaging with atomic force microscopy show a stochastic dissolution of glass surface resulting in a higher surface roughness with increasing corrosion time in aqueous solution. This study shows that a true equilibrium between soluble silica species in the solution phase and silicate species in the glass network could not be warranted by performing corrosion experiments in the solution where dissolved silica species are initially equilibrated with amorphous silica in the presence of KOH. The leaching of mobile species (B, Na) could affect the saturation level of aqueous solution and induce further dissolution of the glass surface.

36 MATERIALS SCIENCE↗

AUTOIGNITION DELAY TIMES FOR REFORMATE GAS MIXTURES FROM METHANE GAS ENGINES

Methane slip is a prominent issue in natural gas reciprocating engines that are used in transportation and marine applications. The incomplete combustion that results in methane slip can be resolved with the introduction of hydrogen within the combustion mixture to improve methane oxidation and further enable combustion within the engine crevices where methane has previously remained unreacted. Steam methane reforming (SMR) is a common method used to produce hydrogen and can be used to design an onboard device to reduce methane slip from reciprocating engines. The development of this reformer device requires the validation of high-fidelity chemical kinetic models at the low temperatures of the crevice volumes of these engines. In this work, auto-ignition data is obtained using a shock tube at lean (φ—0.714 or λ—1.4) and stoichiometric (φ, λ = 1) equivalence ratios spanning a temperature range of 1042–1234 K at the 80-bar operating pressure of the test engine. Blends of methane, hydrogen, and reformate products from the SMR reaction are shock-heated in synthetic air, with the ignition delay time measured using an OH* chemiluminescence detector at 310 nm and a CH* detector at 430 nm. The experimental results are compared to several state-of-the-art chemical kinetic mechanisms from the literature. In general, most of the mechanisms show very good agreement with experiments at higher temperatures, with simulation results showing little deviation from experiments at lower temperatures. A sensitivity analysis was conducted, and the results reveal that the reaction H2 + CH3O2 = H + CH3O2H has a very significant role in determining low-temperature ignition delay times (IDTs) of SMR mixtures. These findings provide valuable insights into the chemical kinetics governing methane reformate combustion and contribute to the optimization of onboard reformer designs aimed at mitigating methane slip in natural gas-fueled engines.

Fraze, Matthew↗