Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Radiation damage to amorphous carbon thin films irradiated by multiple 46.9 nm laser shots below the single-shot damage threshold

High-surface-quality amorphous carbon (a-C) optical coatings with a thickness of 45 nm, deposited by magnetron sputtering on a silicon substrate, were irradiated by the focused beam of capillary-discharge Ne-like Ar extreme ultraviolet laser (CDL=capillary-discharge laser; XUV=extreme ultraviolet, i.e., wavelengths below 100 nm). The laser wavelength and pulse duration were 46.9 nm and 1.7 ns, respectively. The laser beam was focused onto the sample surface by a spherical Sc/Si multilayer mirror with a total reflectivity of about 30%. The laser pulse energy was varied from 0.4 to 40 muJ on the sample surface. The irradiation was carried out at five fluence levels between 0.1 and 10 J/cm{sup 2}, accumulating five different series of shots, i.e., 1, 5, 10, 20, and 40. The damage to the a-C thin layer was investigated by atomic force microscopy (AFM) and Nomarski differential interference contrast (DIC) optical microscopy. The dependence of the single-shot-damaged area on pulse energy makes it possible to determine a beam spot diameter in the focus. Its value was found to be equal to 23.3+-3.0 mum using AFM data, assuming the beam to have a Gaussian profile. Such a plot can also be used for a determination of single-shot damage threshold in a-C. A single-shot threshold value of 1.1 J/cm{sup 2} was found. Investigating the consequences of the multiple-shot exposure, it has been found that an accumulation of 10, 20, and 40 shots at a fluence of 0.5 J/cm{sup 2}, i.e., below the single-shot damage threshold, causes irreversible changes of thin a-C layers, which can be registered by both the AFM and the DIC microscopy. In the center of the damaged area, AFM shows a-C removal to a maximum depth of 0.3, 1.2, and 1.5 nm for 10-, 20- and 40-shot exposure, respectively. Raman microprobe analysis does not indicate any change in the structure of the remaining a-C material. The erosive behavior reported here contrasts with the material expansion observed earlier [L. Juha et al., Proc. SPIE 5917, 91 (2005)] on an a-C sample irradiated by a large number of femtosecond pulses of XUV high-order harmonics.

36 MATERIALS SCIENCE↗

Resonant Raman scattering contribution to attenuation of x rays at energies in lower vicinity of the K-shell ionization threshold of some elements

Attenuation of the x rays and gamma rays in the {sub 22}Ti, {sub 41}Nb, {sub 69}Tm, {sub 70}Yb, and {sub 71}Lu elements have been measured with special emphasis for the x ray energies (E{sub in}) in lower vicinity of the K shell ionization threshold (B{sub K}) of the element. The incident photon beam is obtained from decay of the {sup 55}Fe, {sup 241}Am, and {sup 57}Co radioisotopes, and fluorescence of the {sub 23}V, {sub 70}Yb, {sub 71}Lu, {sub 74}W, {sub 76}Os, and {sub 90}Th targets excited by the x rays and gamma rays from the radioisotopes. The measurements were performed using energy dispersive setups involving Ge detectors. The measured attenuation coefficients agree with the available theoretical values except at the photon energies with (B{sub K}-E{sub in}) less than or nearly equal to the K-shell width (GAMMA{sub K}), where significant positive deviations as large as factor of 2 have been observed. In view of reliability of the available theoretical cross sections for the photoionization and the photon scattering processes, the magnitude of positive alteration at the photon energy in lower vicinity of the ionization threshold is attributed to the K shell resonant Raman scattering (RRS) process and the corresponding cross sections have been deduced. Possible matrix effects in the energy dispersive x ray spectrometry due to RRS are also discussed.

36 MATERIALS SCIENCE↗

Control of 2{omega} (527 nm) stimulated Raman scattering in a steep density gradient plasma

Experiments show that application of laser smoothing schemes including smoothing by spectral dispersion and polarization smoothing effectively suppresses stimulated Raman scattering from a 2{omega} (527 nm) laser beam in a low average-gain plasma with a steep density gradient. Full-wave simulations reproduce the observed trends in the data and show that the scattering reduction is an indirect result of suppressing active filamentation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microcrystalline Si films grown at low temperatures (90-220 deg. C) with high rates in atmospheric-pressure VHF plasma

This work deals with the structural properties of microcrystalline silicon (muc-Si:H) films grown at low temperatures (90-220 deg. C) with high rates in atmospheric-pressure He/H{sub 2}/SiH{sub 4} plasma, which is excited by a 150 MHz very high frequency power using a porous carbon electrode. This plasma permits to enhance the chemical reactions both in gas phase and on the film-growing surface, while suppressing ion impingement upon the surface. Raman crystalline volume fractions of the muc-Si:H films are studied in detail as functions of film thickness and substrate temperature (T{sub sub}). The results show that the muc-Si:H film deposited with 50 (SCCM) (SCCM denotes standard cubic centimeters per minute at STP) SiH{sub 4} has no amorphous transition layers at the film/substrate interface in spite of the high deposition rate of 6.4 nm/s, which is verified by the cross sectional observations with a transmission electron microscope. In addition, the T{sub sub} dependence of Raman crystallinity of the muc-Si:H films indicates that a highly crystallized muc-Si:H film grows even when T{sub sub} is reduced to 90 deg. C. Further systematic studies are needed for both device applications and deposition on thermally sensitive plastic materials.

36 MATERIALS SCIENCE↗

Enhancement in optical absorption of silicon fibrous nanostructure produced using femtosecond laser ablation

Fibrous nanostructures are proposed for the application of solar cell. Irradiation of silicon surface with a few hundred femtosecond laser pulses of fluence 13 kJ/m{sup 2} at 13 MHz pulse frequency in air atmosphere results in the formation of fibrous nanostructure layer on the treated surface that leads to a significant decrease in the reflection of visible radiation. For the visible wavelength, the decreased reflection is a result of the nature of the nanostructure. The Raman peak shift in the irradiated surface confirms that the surface is changed to amorphous silicon due to fibrous nanostructure formation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of low-temperature-buffer, rf-power, and annealing on structural and optical properties of ZnO/Al{sub 2}O{sub 3}(0001) thin films grown by rf-magnetron sputtering

ZnO thin films were epitaxially grown on Al{sub 2}O{sub 3} (0001) substrates in a radio-frequency (rf) magnetron sputtering chamber. The surface morphology of ZnO was remarkably affected by the incorporation of a low-temperature grown ZnO buffer as well as the changes in rf-power. X-ray diffractions, combined with the surface micropits, revealed strain relaxations in the ZnO epilayers grown with higher rf-powers, which in turn caused a redshift to the intrinsic exciton absorption peak. Strain relaxations were also observed in the ZnO epilayers upon thermal annealing, which led to a redshift in the E{sub 2}{sup high} Raman mode. A factor of approx0.7 cm{sup -1} GPa{sup -1}, i.e., a biaxial stress of 1 GPa can shift the E{sub 2}{sup high} mode by 0.7 cm{sup -1}, was obtained. The point defects related absorptions and the exciton localizations were suppressed by annealing, which, in conjunction with the strain-relaxation induced redshift in the intrinsic-exciton absorptions, steepened the absorption edge and increased the optical bandgap energy of the ZnO epilayer.

36 MATERIALS SCIENCE↗

Deposition Of Materials Using A Simple Planar Coil Radio Frequency Inductively Coupled Plasma System

A planar coil RF inductively coupled plasma (PC-RFICP) systems is set up for the purpose of thin film deposition. The system is powered by a 13.56 MHz, 550 W, 50 OMEGA RF generator. The RF power is transferred to the plasma via a planar induction coil. The impedance matching unit consists of an air core step-down transformer and a tunable vacuum capacitor. This system is used for the plasma enhanced chemical vapor deposition (PECVD) of diamond-like carbon (DLC) film on silicon substrate, and hydrogenated amorphous carbon (a-C:H) film.

36 MATERIALS SCIENCE↗

Enhanced Raman scattering by spatially distributed atomic coherence

We demonstrate experimentally an enhancement in Raman scattering in Rb atomic vapor due to the atomic coherence initially prepared by a weak write laser. We find that the enhanced Raman scattering depends on the spatial distribution of the atomic spin coherence and can be explained with a simple picture of three-wave mixing. This effect can in principle be used to have a light conversion efficiency near unity in Raman process. Such an enhanced Raman scattering may have practical applications in quantum information, nonlinear optics, and laser spectroscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Graphitic carbon growth on Si(111) using solid source molecular beam epitaxy

Solid source molecular beam epitaxy is used to explore the growth of carbon films directly on Si(111). It is shown that graphitic carbon is grown by the implementation of a thin amorphous carbon film that suppresses the formation of SiC precipitates. Raman scattering measurements show the D and G vibrational phonon modes, indicating graphitic ordering in the carbon film. X-ray photoelectron spectroscopy is used to verify the formation of sp2 bonds in the graphitic carbon films and confirms the suppression of SiC.

36 MATERIALS SCIENCE↗

Monolayer graphene growth on sputtered thin film platinum

It is demonstrated that sputtered thin film platinum (Pt) can be used as a catalytic metal for graphene growth on metal. During the crystallization annealing, the sputtered Pt is crystallized mostly into Pt (111) orientation, maintaining excellent surface roughness with no sign of agglomeration. The relatively lower carbon solubility in Pt and the good surface roughness of the thin film Pt enable us to form a uniform monolayer graphene on Pt over the entire region of the thin film Pt/SiO{sub 2}/Si substrate by carbon dissolution and segregation method processed in a methane ambient. The monolayer graphene grown on Pt has been successfully transferred to SiO{sub 2}/Si substrate by simple wet etching of Pt. The results of Raman spectroscopic and scanning tunneling microscopic measurements of the synthesized graphene layer are presented.

36 MATERIALS SCIENCE↗

Substrate doping effects on Raman spectrum of epitaxial graphene on SiC

In this paper, we reported a Raman scattering study of epitaxial graphene on different doped 6H-SiC (0001) substrates and investigated the substrate induced charge-transfer doping to the epitaxial graphene. We found that the charge carrier type and concentration of epitaxial graphene can be altered by SiC substrates with different doping level and doping type. This effect is comparable to that obtained by electrochemical doping. As Raman scattering is very sensitive to the doping level, the charge carrier concentration of epitaxial graphene can be estimated by the Raman G-peak shift. Our results are fundamental and may have implications for future epitaxial-graphene-based micro/nanoelectronic devices.

36 MATERIALS SCIENCE↗

Phononic Molecules Studied by Raman Scattering

An acoustic nanocavity can confine phonons in such a way that they act like electrons in an atom. By combining two of these phononic-atoms, it is possible to form a phononic 'molecule', with acoustic modes that are similar to the electronic states in a hydrogen molecule. We report Raman scattering experiments performed in a monolithic structure formed by a phononic molecule embedded in an optical cavity. The acoustic mode splitting becomes evident through both the amplification and change of selection rules induced by the optical cavity confinement. The results are in perfect agreement with photoelastic model simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Suppression of Landau damping via electron band gap

The pondermotive potential in the x-ray Raman compression can generate an electron band gap, which suppresses the Landau damping. The regime is identified where a Langmuir wave can be driven without damping in the stimulated Raman compression. It is shown that the partial wave breaking and the frequency detuning due to the trapped particles would be greatly reduced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energy and charge transfers between (Bu{sub 4}N){sub 2}(Ru)(dcbpyH){sub 2}(NCS){sub 2} (N719) and ZnO thin films

ZnO thin films and (Bu{sub 4}N){sub 2}(Ru)(dcbpyH){sub 2}(NCS){sub 2} (called N719) sensitized ZnO thin films are grown on fluorine-doped tin oxide (FTO) conducting glass substrates using laser molecular beam epitaxy. Ultraviolet-visible absorption, photoluminescence (PL), surface photovoltage spectroscopy, and Raman scattering are employed to probe into the transition process of photogenerated charges and the interaction between ZnO and N719. The experimental results indicate that there is a significant electronic interaction between N719 and ZnO through chemiadsorption. The interaction greatly enhances the photogenerated charge separation and thus the photovoltaic response of the ZnO film but remarkedly weakens its radiative recombination, i.e., PL, implying strong energy and charge transfer occurring between N719 and ZnO. In addition, a new PL peak observed at about 720 nm in N719 sensitized ZnO/FTO is attributed to the electron-hole recombination of N719.

36 MATERIALS SCIENCE↗

Investigation of the Effects of MIR-FELIrradiation on the Photoluminescence of Titanium Dioxides

A mid-infrared free electron laser (MIR-FEL: 5 {mu}m-20 {mu}m) facility (KU-FEL: Kyoto University Free Electron Laser) has been constructed in Institute of Advanced Energy Kyoto University, and first laser saturation at 13.2 {mu}m was achieved in May 2008. Currently, we have started to develop the application of MIR-FEL in the field of energy and material science. This study aimed at investigating the feasibility for the development of new evaluation technique of electron-phonon interaction in metal oxides by MIR-FEL. A preliminary result of electrical and optical properties of titanium dioxides was presented.

36 MATERIALS SCIENCE↗

Structural and optoelectronic properties of germanium-rich islands grown on silicon using molecular beam epitaxy

We report on the structural and optoelectronic properties of self-assembled germanium-rich islands grown on silicon using molecular beam epitaxy. Raman, photocurrent, photoluminescence, and transient optical spectroscopy measurements suggest significant built-in strains and a well-defined interface with little intermixing between the islands and the silicon. The shape of these islands depends on the growth conditions and includes pyramid, dome, barn-shaped, and superdome islands. Most importantly, we demonstrate that these germanium-rich islands provide efficient light emission at telecommunication wavelengths on a complementary metal-oxide semiconductor-compatible platform.

36 MATERIALS SCIENCE↗

Absolute calibration of LIDAR Thomson scattering systems by rotational Raman scattering

Absolute calibration of LIDAR Thomson scattering systems on large fusion devices may be achieved using rotational Raman scattering. The choice of calibrating gas molecule presents different options and design trade-offs and is likely to be strongly dependent on the laser wavelength selected. Raman scattering of hydrogenic molecules produces a very broad spectrum, however, with far fewer scattered photons than scattering from nitrogen or oxygen at the same gas pressure. Lower laser wavelengths have the advantage that the Raman cross section increases, {sigma}{sub Raman}{proportional_to}1/{lambda}{sub 0}{sup 4}, but the disadvantage that the spectral width of the scattered spectrum decreases, {Delta}{lambda}{sub Raman}{proportional_to}{lambda}{sub 0}{sup 2}. This narrower spectrum makes measurement closer to the laser wavelength necessary. The design of the calibration technique presents a number of challenges. Some of these challenges are generic to all Thomson scattering systems. These include detecting a sufficient number of photoelectrons and designing filters that measure close to the laser wavelength while simultaneously achieving adequate blocking of the laser wavelength. An issue specific to LIDAR systems arises since the collection optics operates over a wide range of depth of field. This wide depth of field has the effect of changing the angle of light incident on the optical interference filter with plasma major radius. The angular distribution then determines the effective spectral transmission function of the interference filter and hence impacts on the accuracy of the absolute calibration. One method that can be used to increase absolute calibration accuracy is collecting both Stokes and anti-Stokes lines with optical filter transmission bands specifically designed to reduce systematic uncertainty.

43 PARTICLE ACCELERATORS↗

Properties of nitrogen implanted and electron beam annealed bulk ZnO

The optical properties of bulk ZnO ion implanted with nitrogen ions, at an energy of 23 keV have been studied as a function of implantation fluence and electron beam (EB) annealing conditions. Nuclear reaction analysis and Raman results have revealed the implanted N concentration and its structural changes with respect to various nitrogen ion fluences. The optical properties of nitrogen implanted bulk ZnO were investigated by low temperature photoluminescence measurements. An enhanced peak at 3.235 eV has been attributed to donor-accepter pair (DAP) emission involving the implanted N acceptor in ZnO. The emission near 3.3085 eV is attributed to a free electron to acceptor transition. We also report a broad band emission feature at {approx}3.09 eV in the nitrogen implanted with 1-2x10{sup 15} ions cm{sup -2} and EB annealed at 800-900 deg. C. This is assigned to a thermally activated nitrogen acceptor transition as it is unique only to nitrogen implanted samples. An ionization energy of 377 meV indicates that this line may correspond to a significantly less shallow acceptor level. In addition an increase in the intensity and dominance of this DAP line in nitrogen implanted samples over the other acceptor transitions was observed with increasing annealing time and temperatures. It is shown that EB annealing offers a method of enhanced nitrogen activation when compared to a more conventional furnace approach.

36 MATERIALS SCIENCE↗