Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Powder diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

High Thermoelectric Performance in 2D Sb 2 Te 3 and Bi 2 Te 3 Nanoplate Composites Enabled by Energy Carrier Filtering and Low Thermal Conductivity

Thermoelectrics are an important class of materials with great potential in alternative energy applications. In this study, two-dimensional (2D) nanoplates of the layered chalcogenides, Sb 2 Te 3 and Bi 2 Te 3 , are synthesized and composites of the two are investigated for their thermoelectric properties. The two materials, Sb 2 Te 3 and Bi 2 Te 3 , were synthesized as hexagonal, 2D nanoplates via a colloidal polyol route. The as-synthesized Sb 2 Te 3 and Bi 2 Te 3 vary drastically from one another in their lateral and vertical dimensions as revealed by scanning electron microscopy and atomic force microscopy. The single crystalline nanoplate nature is deduced by high-resolution transmission electron microscopy and selected area electron diffraction. Nanoplates have well-defined hexagonal facets as seen in the scanning and transmission electron microscopy images. The nanoplates were consolidated as an anisotropic nanostructured pellet via spark plasma sintering. Preferred orientation observed in the powder X-ray diffraction pattern and scanning electron microscopy images of the fractured pellets confirm the anisotropic structure of the nanoplates. Thermoelectric properties in the parallel and perpendicular directions were measured, revealing strong anisotropy with a significant reduction to thermal conductivity in the perpendicular direction due to increased phonon scattering at nanoplate interfaces. All compositions, except that of the 25% Bi 2 Te 3 nanoplate composite, behave as degenerate semiconductors with increasing electrical resistivity as the temperature increases. The Seebeck coefficient is also increased dramatically in the nanocomposites, the highest reaching 210 μV/K for 15% Bi 2 Te 3 . The increase in Seebeck is attributed to energy carrier filtering at the nanoplate interfaces. Overall, these enhanced thermoelectric properties lead to a drastic increase in the thermoelectric performance in the perpendicular direction, with zT ~ 1.26, for the 15% Bi 2 Te 3 nanoplate composite at 450 K.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Psilocybin: crystal structure solutions enable phase analysis of prior art and recently patented examples

Psilocybin {systematic name: 3-[2-(dimethylamino)ethyl]-1 H -indol-4-yl dihydrogen phosphate} is a zwitterionic tryptamine natural product found in numerous species of fungi known for their psychoactive properties. Following its structural elucidation and chemical synthesis in 1959, purified synthetic psilocybin has been evaluated in clinical trials and has shown promise in the treatment of various mental health disorders. In a recent process-scale crystallization investigation, three crystalline forms of psilocybin were repeatedly observed: Hydrate A, Polymorph A, and Polymorph B. The crystal structure for Hydrate A was solved previously by single-crystal X-ray diffraction. This article presents new crystal structure solutions for the two anhydrates, Polymorphs A and B, based on Rietveld refinement using laboratory and synchrotron X-ray diffraction data, and density functional theory (DFT) calculations. Utilizing the three solved structures, an investigation was conducted via Rietveld method (RM) based quantitative phase analysis (QPA) to estimate the contribution of the three different forms in powder X-ray diffraction (PXRD) patterns provided by different sources of bulk psilocybin produced between 1963 and 2021. Over the last 57 years, each of these samples quantitatively reflect one or more of the hydrate and anhydrate polymorphs. In addition to quantitatively evaluating the composition of each sample, this article evaluates correlations between the crystal forms present, corresponding process methods, sample age, and storage conditions. Furthermore, revision is recommended on characterizations in recently granted patents that include descriptions of crystalline psilocybin inappropriately reported as a single-phase `isostructural variant.' Rietveld refinement demonstrated that the claimed material was composed of approximately 81% Polymorph A and 19% Polymorph B, both of which have been identified in historical samples. In this article, we show conclusively that all published data can be explained in terms of three well-defined forms of psilocybin and that no additional forms are needed to explain the diffraction patterns.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effect of Collimation on Diffraction Signal-to-Background Ratios at a Neutron Diffractometer

High diffraction signal-to-background ratios (SBRs), the ratios of diffraction peak integrated intensity over its background intensity, are desired for a neutron diffractometer to acquire good statistics for diffraction pattern measurements and subsequent data analysis. For a given detector, while the diffraction peak signals primarily depend on the characteristics of neutron beam and sample coherent scattering, the background largely originates from the sample incoherent scattering and the scattering from the instrument space. In this work, we investigated the effect of collimation on neutron diffraction SBRs of Si powder measurements using one high-angle area detector bank coupled with six different collimation configurations in a large and complex instrument space at the engineering materials diffractometer VULCAN, SNS, ORNL. The results revealed that the diffraction SBRs can be significantly improved by a proper coarse collimator that leaves no gap between the detector and the collimator, and the improvement of SBRs by a fine radial collimator was remarkable with a proper coarse collimator in place but not distinguishable without one. It was also found that the diffraction SBRs were not effectively improved by adding neutron absorbing element boron to the fine radial collimator body, which indicates that either the absorption of secondary scattered neutrons by the added boron is insignificant or the collimator base material (resin and ABS) alone attenuates background scattering sufficiently. These findings could serve as a useful reference for diffractometer developers and/or operators to optimize their collimation to achieve higher diffraction SBRs.

Yu, Dunji↗
DOE OSTI2014

Ultrasound-assisted green synthesis of nanocrystalline Co{sub 3}O{sub 4} in the ionic liquid

Cobalt oxide Co{sub 3}O{sub 4} nanoparticles have been synthesized via sonochemical method in an ionic liquid, 1-Ethyl-3-methylimidazolium tetrafluoroborate [EMIM][BF4] for the first time. The crystal structure of Co{sub 3}O{sub 4} nanoparticles has been characterized by using powder X-ray diffraction (XRD). Morphology has been characterized by transmission electron microscopy (TEM). The optical properties were studied by UV-VIS Spectrometer.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Nucleation kinetics of urea succinic acid –ferroelectric single crystal

Single crystals of Urea Succinic Acid (USA) were grown by slow cooling technique. The crystalline system was confirmed by powder X-ray diffraction. The metastable zonewidth were carried out for various temperatures i.e., 35°, 40°, 45° and 50°C. The induction period is experimentally determined and various nucleation parameters have been estimated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

One step combustion synthesis and thermoluminescence in Y{sub 3}Al{sub 5}O{sub 12}:Ce{sup 3+}

In the present paper one step combustion synthesis of compound Y{sub 3}Al{sub 5}O{sub 12}:Ce{sup 3+} is reported using a modified procedure and employing mixed (Urea + Glycine) as fuel. Powder X-ray diffraction confirms the formation of said compound. Thermoluminescence study over the wide gamma exposure (1 KGy – 13 KGy) Suggests the possible use of the phosphor in dosimetric application.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Influence of 6s{sup 2} lone pair electrons of Bi{sup 3+} on its preferential site occupancy in fluorapatite, NaCa{sub 3}Bi(PO{sub 4}){sub 3}F – An insight from Eu{sup 3+} luminescent probe

Graphical abstract: Eu{sup 3+} structural probe – difference in Eu{sup 3+} PL emission in (a) NaCa{sub 3}Bi{sub 0.95}Eu{sub 0.05}(PO{sub 4}){sub 3}F and (b) NaCa{sub 3}La{sub 0.95}Eu{sub 0.05}(PO{sub 4}){sub 3}F suggests Bi{sup 3+} with preferential site occupancy at M(II) site directing Eu{sup 3+} to M(I) site. - Highlights: • Eu{sup 3+} luminescent probe used for establishing the role of 6s{sup 2} lone pair electrons of Bi{sup 3+} in fluorapatite. • Difference in Eu{sup 3+} PL emission spectral features in NaCa{sub 3}Bi{sub 0.95}Eu{sub 0.05}(PO{sub 4}){sub 3}F and NaCa{sub 3}La{sub 0.95}Eu{sub 0.05}(PO{sub 4}){sub 3}F. • Preferential site occupancy of Bi{sup 3+} in M(II) site directs Eu{sup 3+} to M(I) site in NaCa{sub 3}Bi{sub 0.95}Eu{sub 0.05}(PO{sub 4}){sub 3}F. - Abstract: Eu{sup 3+} luminescence was used as a structural probe in understanding the preferential site occupancy of lone pair cation, Bi{sup 3+}, in fluorapatite by comparing the photoluminescence (PL) emission spectral features with that of in analogous La{sup 3+} based fluorapatite. The fluorapatites, NaCa{sub 3}Bi{sub 0.95}Eu{sub 0.05}(PO{sub 4}){sub 3}F and NaCa{sub 3}La{sub 0.95}Eu{sub 0.05}(PO{sub 4}){sub 3}F, were synthesized by conventional high temperature solid state reaction method and characterized by powder X-ray diffraction (XRD) and FT-IR spectroscopy. The Eu{sup 3+} PL results revealed a difference in the emission spectral features in NaCa{sub 3}Bi{sub 0.95}Eu{sub 0.05}(PO{sub 4}){sub 3}F and NaCa{sub 3}La{sub 0.95}Eu{sub 0.05}(PO{sub 4}){sub 3}F. This difference in Eu{sup 3+} PL emission can be attributed to the difference in its site occupancy in the studied fluorapatites.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Upconversion luminescence in BaMoO{sub 4}:Pr{sup 3+} phosphor for display devices

The frequency upconversion is an important nonlinear optical property by which near infrared light is converted into the visible light. The BaMoO{sub 4}:Pr{sup 3+} powder phosphor has been synthesized by solid state reaction method. The upconversion emission bands are recorded under the excitation of 808 nm diode laser. The phase formation of the prepared phosphor has been identified by powder X-ray diffraction (XRD) technique. The upconversion emission mechanism and colour coordinate have been explained by using energy level and CIE (International Commission on Illumination) chromaticity diagram study, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Structural and electrical properties of organic stilbazolium single crystal of DSCHS

Organic nonlinear optical crystal 4-N, N-Dimethyl Amino-4’N’-Methyl-Stilbazolium 3-Carboxy-4-Hydroxy benzenesulfonate (DSCHS) has been successfully grown from aqueous methanol solution by adopting slow solvent evaporation technique. Chemical composition of the sample was confirmed by CHN analysis. Powder X-ray diffraction analysis was carried out and it shows that DSCHS crystal belongs to triclinic structure with Pl space group. It is found that this material exhibits positive photoconductivity. Dielectric studies were also carried out for different temperature by varying the frequency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

The impact of carbon coating on the synthesis and properties of α"–Fe 16 N 2 powders

This study presents the preparation of carbon composite Fe 16 N 2 powders, and the influence of a protective carbon coating on the yield and magnetic properties of Fe 16 N 2 . Nanoparticle precursors with and without carbon were reacted under ammonia gas flow to produce Fe 16 N 2 . X-ray diffraction indicates that the powders contain typically 50-60% Fe 16 N 2 , with the remaining phases being unreacted iron, Fe 4 N or Fe 3 N. Transmission electron microscopy demonstrates that the carbon coating is effective atnd reducing the level of sintering of Fe nanoparticles during the reduction stage prior to ammonolysis to form Fe nanoparticles. In situ TEM was used to observe loss of ordering in the nitrogen sublattice of carbon composite Fe 16 N 2 powders in the range of 168 °C to 200 °C. Magnetic susceptibility measurements show maximum values for saturation magnetization in the range of 232 emu/g -1 , and for coercivity near 930 Oe, for samples measured up to 2T applied field at 300K.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Crystal structure and ion conductivity of a new mixed-anion phosphate LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7}

A new lithium-containing phosphate, LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7}, was prepared by a solid-state reaction, and it was characterized by an ab initio structure determination method on the basis of synchrotron powder X-ray diffraction data. LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7} was found to be orthorhombic (space group Pnma) with lattice parameters a=9.0387(1) Å, b=10.6072(1) Å, c=8.3065(1) Å, and V=796.39(1) Å{sup 3}. The structure features infinite [Mg{sub 3}O{sub 10}]{sub ∞} layers that are parallel to the bc plane and that are interconnected along the a axis by PO{sub 4} and P{sub 2}O{sub 7} groups. The [Mg{sub 3}O{sub 10}]{sub ∞} layer contains Mg{sub 3}O{sub 14} trimers that are formed by three edge-shared MgO{sub 6} octahedra. The PO{sub 4} and P{sub 2}O{sub 7} groups are located alternatively between [Mg{sub 3}O{sub 10}]{sub ∞} layers. This gives rise to a three-dimensional framework that contains large tunnels along the directions [1 0 0] and [0 1 0]; the Li{sup +} ions are stabilized in these tunnels. AC impedance spectroscopy shows that LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7} has an ionic conductivity of 3.40×10{sup −5} S cm{sup −1} at 769 K, with an activation energy of 1.17 eV. - Graphical abstract: Polyhedral view of LiMg3(PO4)P2O7. Li+ ions are represented by orange spheres, MgO6 groups by octahedra, and PO4 groups by tetrahedra. - Highlights: • New compound LiMg{sub 3}(PO{sub 4})P{sub 2}O{sub 7} is reported. • The crystal structure is investigated by synchrotron XRD analysis. • The structure features [Mg{sub 3}O{sub 10}]{sub ∞} layers with interconnecting PO{sub 4} and P{sub 2}O{sub 7} groups. • Correlation between the crystal structure and ionic conductivity is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Comparative study of glycine single crystals with additive of potassium nitrate in different concentration ratios

Semi-organic crystals of Glycine Potassium Nitrate (GPN) with potential applications in Non linear optics (NLO) were grown using slow evaporation technique. Glycine and Potassium Nitrate were taken in three different concentration ratios of 3:1, 2:1 and 1:1 respectively. We checked the solubility of the material in distilled water at different temperatures and could observe the growth of crystals in 7 weeks time. Purity of the grown crystals was confirmed by Energy Dispersive X-ray Analysis (EDAX) and CHN analysis. GSN Powder X-ray diffraction pattern was recorded to confirm the crystalline nature. To confirm the applications of grown crystals in opto-electronics field, UV-Vis-NIR study was carried out. Dielectric properties of the samples were studied in between the frequency range 1Hz to 100 KHz.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Facile route of biopolymer mediated ferrocene (FO) nanoparticles in aqueous dispersion

In this paper, we present a facile method for production stable aqueous dispersion of ferrocene (FO) nanoparticles. Ferrocene compounds were employed to achieve stable nanodispersions, stabilized with three different biopolymers namely, alginate, CM-dextran and chitosan. The nanoparticles produce are spherical, less than 10 nm in mean diameter and highly stable without any sedimentation. Fourier infrared transform (FTIR) and X-ray diffraction (XRD) studies confirmed the purity of ferrocene nanoparticles there is no modifications occur during the preparation route. FTIR spectra results were consistent with the presence of absorption band of cyclopentadienyl ring (C{sub 5}H{sub 5}{sup −} ion) which assigned to ν(C-C) vibrations (1409 cm-1), δ(C-H) stretching at 1001 cm{sup −1} and π(C-H) vibrations at 812 cm{sup −1}. Furthermore, all functional group for biopolymers such as C O from carboxyl group of CM-dextran and sodium alginate appears at 1712 cm{sup −1} and 1709 cm{sup −1} respectively, indicating there are steric repulsion interactions for particles stabilization. Powder X-ray diffraction patterns of sedimented samples of the biopolymers-stabilized ferrocene (FO) showed all reflections which were indexed respectively to the (−110), (001), (−201), (−111), (200), (−211), (210), (120) and (111) according to the monoclinic phase ferrocene. This confirmed that the products obtained were of high purity of Fe and EDAX analysis also suggests that the presence of the Fe element in the colloidal dispersion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Analysis of neptunium oxides produced through modified direct denitration

Production of neptunium-237 ( 237 Np) target materials for plutonium-238 ( 238 Pu) radioisotope thermoelectric generators (RTGs) for deep space exploration requires advanced chemistry and engineering development. Currently, the domestic Pu-238 Supply Program at Oak Ridge National Laboratory produces neptunium dioxide (NpO 2 ) for target material using a modified direct denitration (MDD) flowsheet. Although the chemistry, reaction mechanisms, and product characteristics of MDD are well understood for uranium, corresponding studies of the neptunium system are still needed to continue optimization of target material properties, production equipment design, and production flowsheets. Here, the objective of this work is to characterize crystalline phases, morphology, surface texture, and particle size of NpO 2 produced via MDD reactions. Solid-phase characterization techniques, including powder X-ray diffraction (pXRD) and scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), were employed to achieve this objective. Subsequent data processing using the Morphological Analysis for Material Attribution (MAMA) software was performed to analyze particle morphology and size. Broadly, the powders were found to contain a mixture of NpO 2 and Np 2 O 5 after denitration with a variety of morphologies. After high-firing, the product was found to be NpO 2 with a typical polycrystalline oxide morphology and a grain size ranging from 0.72 to 0.94 µm. These analyses provide knowledge on the reaction pathway for a non-traditional NpO 2 synthesis method and offer additional unique insight into production-scale environments for transuranic materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

Metal-organic frameworks based on magnesium(II): adsorption and luminescence properties

Two new metal-organic frameworks based on magnesium(II) ions, [Mg{sub 4}(bdc){sub 3}(dma){sub 6}(NO{sub 3}){sub 2}]•DMA (1; bdc is 1,4-benzenedicarboxylate; dma, DMA is N,N-dimethylacetamide) and [Mg{sub 3}(bpdc){sub 3}(nmp){sub 4}] (2; bpdc is 4,4´-biphenyldicarboxylate; nmp is N-methylpyrrolidone), were synthesized in DMA or NMP, respectively. According to the single-crystal X-ray diffraction data, compound 1 is built of binuclear carboxylate units {Mg_2(O_2CR)_3}, which were previously not observed in metal-organic frameworks. Compound 2 is based on trinuclear carb oxylate units {Mg_3(O_2CR)_6}. Compound 1 has a layered structure (hcb topology), whereas compound 2 has a distorted three-dimensional cubic structure (pcu topology). The phase purity and chemical identity of the compounds were confirmed by IR spectroscopy, thermogravimetry, elemental analysis, and powder X-ray diffraction. Photoluminescence properties of both compounds are indicative of intraligand charge-transfer transitions of one (for 1) or two (for 2) types. Textural characteristics of an activated sample of 1 were measured by nitrogen and hydrogen adsorption at 77 K and by carbon dioxide adsorption at 195 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Zinc(II) and Cadmium(II) coordination polymers constructed from phenylenediacetate ligands

ABSTRACT: A series of new coordination polymers {[Zn(μ-opda)(μ-bpa)]·2H_2O}{sub n} (1), [Zn(μ{sub 3}-ppda)(μ-bpa)]{sub n} (2), [Cd(μ{sub 3}-ppda)(μ-bpa)]{sub n} (3), [Cd(μ{sub 3}-mpda)(μ-bpa)]{sub n} (4) and [Cd(μ{sub 3}-mpda)(μ-bipy)]{sub n} (5), (o/m/ppda=1,2/1,3/1,4-phenylenediacetate, bpa=1,2-bi(4-pyridyl)ethane, bipy=4,4′-bipyridine) were synthesized. Their structures were characterized by elemental analysis, IR spectroscopy, single-crystal and powder X-ray diffraction. Furthermore, the effect of metal sources (zinc acetate and zinc oxide) and acidity of the solution on the structure of the coordination polymers was discussed for complexes 1 and 5, respectively. The single-crystal X-ray crystallographic studies revealed that complexes 1, 3, 4 and 5 are uninodal (4)-connected 2D frameworks and display sql topology with the point symbol of (4{sup 4}.6{sup 2}). Complex 2 is 3D coordination polymer and exhibits pcu topology with the point symbol of (4{sup 12}.6{sup 3}). In addition, the luminescent properties and thermal behavior of all complexes were also investigated. - Graphical abstract: Scheme 1. Topologies of Coordination Polymers Reported in This Paper.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Phase transitions of ε-HNIW in compound systems

The heat-induced phase transitions of ε-HNIW, both neat and coated with various additives used in plastic bonded explosives, were investigated using powder X-ray diffraction and differential scanning calorimetry. It was found that ε-HNIW, after being held at 70°C for 60 h, remained in the ε-phase. Applying other conditions, various phase transition parameters were determined, including T{sub c} (the critical phase transition temperature), T{sub 50} (the temperature at which 50% of the phase transition is complete) and T{sub 180} (the percentage of γ-HNIW present in samples heated to 180°C). According to the above three parameters, additives were divided into three categories: those that delay phase transition, those that raise the critical temperature and the transition rate, and those that promote the phase transition. Based on the above data, a phase transition mechanism is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2013

Magnetic and ferroelectric studies of double perovskite (KBi)(FeNb)O{sub 6} ceramics

This work describe the synthesis and characterization of the (KBi)(FeNb)O{sub 6} (KBFN) complex Perovskite. This compound has been structurally characterized by powder X-ray diffraction. The magnetic property of KBFN has been measured. The magnetic properties of (KBi)(FeNb)O{sub 6} is found to be a antiferromagnetically at temperature ranging from {approx}26K. The experimental results indicates that the magnetic moments of Fe{sup 3+} ion in (KBi)(FeNb)O{sub 6} order antiferromagnetically with a slight ferromagnetic moment below ca .26K and weak ferromagnetic moments disappears above ca. 26 K. The ferroelectric behaviour of polarization vs. applied electric field measurements were taken for the KBFN pellet. The shape of the curve are neither consistent with ferroelectric behaviour but rather indicative of conduction.

36 MATERIALS SCIENCE↗