Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle shape”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Superradiance and Subradiance due to Quantum Interference of Entangled Free Electrons

When multiple quantum emitters radiate, their emission rate may be enhanced or suppressed due to collective interference in a process known as super- or subradiance. Such processes are well known to occur also in light emission from free electrons, known as coherent cathodoluminescence. Unlike atomic systems, free electrons have an unbounded energy spectrum, and, thus, all their emission mechanisms rely on electron recoil, in addition to the classical properties of the dielectric medium. To date, all experimental and theoretical studies of super- and subradiance from free electrons assumed only classical correlations between particles. However, dependence on quantum correlations, such as entanglement between free electrons, has not been studied. Recent advances in coherent shaping of free-electron wave functions motivate the investigation of such quantum regimes of super- and subradiance. In this Letter, we show how a pair of coincident path-entangled electrons can demonstrate either super- or subradiant light emission, depending on the two-particle wave function. By choosing different free-electron Bell states, the spectrum and emission pattern of the light can be reshaped, in a manner that cannot be accounted for by a classical mixed state. We show these results for light emission in any optical medium and discuss their generalization to many-body quantum states. Furthermore, our findings suggest that light emission can be sensitive to the explicit quantum state of the emitting matter wave and possibly serve as a nondestructive measurement scheme for measuring the quantum state of many-body systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Smart pixel sensors: towards on-sensor filtering of pixel clusters with deep learning

Highly granular pixel detectors allow for increasingly precise measurements of charged particle tracks. Next-generation detectors require that pixel sizes will be further reduced, leading to unprecedented data rates exceeding those foreseen at the High- Luminosity Large Hadron Collider. Signal processing that handles data incoming at a rate of $\mathcal{O}$(40 MHz) and intelligently reduces the data within the pixelated region of the detector at rate will enhance physics performance at high luminosity and enable physics analyses that are not currently possible. Using the shape of charge clusters deposited in an array of small pixels, the physical properties of the traversing particle can be extracted with locally customized neural networks. In this first demonstration, we present a neural network that can be embedded into the on-sensor readout and filter out hits from low momentum tracks, reducing the detector's data volume by 57.1%–75.7%. The network is designed and simulated as a custom readout integrated circuit with 28 nm CMOS technology and is expected to operate at less than 300 μW with an area of less than 0.2 mm 2 . The temporal development of charge clusters is investigated to demonstrate possible future performance gains, and there is also a discussion of future algorithmic and technological improvements that could enhance efficiency, data reduction, and power per area.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2017

Resonant particle production during inflation: a full analytical study

We revisit the study of the phenomenology associated to a burst of particle production of a field whose mass is controlled by the inflaton field and vanishes at one given instance during inflation. This generates a bump in the correlators of the primordial scalar curvature. We provide a unified formalism to compute various effects that have been obtained in the literature and confirm that the dominant effects are due to the rescattering of the produced particles on the inflaton condensate. We improve over existing results (based on numerical fits) by providing exact analytic expressions for the shape and height of the bump, both in the power spectrum and the equilateral bispectrum. We then study the regime of validity of the perturbative computations of this signature. Finally, we extend these computations to the case of a burst of particle production in a sector coupled only gravitationally to the inflaton.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Oxide evolution on the SiC layer of TRISO particles during extended air oxidation

Tristructural isotropic (TRISO) fuel particles have been primarily developed for high-temperature gas-cooled nuclear reactors and can be subjected to oxidizing environments for extended periods in an off-normal accident scenario. Surrogate TRISO fuel particles were oxidized in air at 1,000 or 1,100 °C for up to 120 h. Here, the oxide scale morphology and thickness were studied via scanning electron microscopy, focused ion beam, and atomic force microscopy. TRISO particles oxidized at 1,100 °C exhibited a highly crystalline oxide scale, which led to significant cracking and irregularly shaped closed porosity, whereas those oxidized at 1,000 °C possessed a primarily amorphous oxide scale, which contained small, rounded internal pores and no larger defects. The observed phenomena deviated from the expected behavior based on models for oxide growth on flat-plate and fiber SiC. The oxidation kinetics of TRISO fuel particles in high-temperature air were investigated without mechanically deforming the surface and were analyzed with respect to oxide morphology.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Conforming window functions for meshfree methods

Window functions provide a base for the construction of approximation functions in many meshfree methods. They control the smoothness and extent of the approximation functions and are commonly defined using Euclidean distances which helps eliminate the need for a meshed discretization, simplifying model development for some classes of problems. However, for problems with complicated geometries such as nonconvex or multi-body domains, poor solution accuracy and convergence can occur unless the extents of the window functions, and thus approximation functions, are carefully controlled, often a time consuming or intractable task. Here in this paper, we present a method to provide more control in window function design, allowing efficient and systematic handling of complex geometries. “Conforming” window functions are constructed using Bernstein–Bézier splines defined on local triangulations with constraints imposed to control smoothness. Graph distances are used in conjunction with Euclidean metrics to provide adequate information for shaping the window functions. The conforming window functions are demonstrated using the Reproducing Kernel Particle Method showing improved accuracy and convergence rates for problems with challenging geometries. Conforming window functions are also demonstrated as a means to simplify the imposition of essential boundary conditions.

, rapid design-to-analysis↗
DOE OSTI2019

Microstructural characterization of plutonium oxalate and oxide particles by three-dimensional focused ion beam tomography

Focused ion beam (FIB) tomography was used to characterize three-dimensional (3D) internal microstructures of plutonium oxalate and oxide particles. Sequential two-dimensional (2D) sectioning and imaging using FIB and 3D image reconstruction were used to elucidate and distinguish internal pore microstructure and distribution in plutonium oxide particles calcined from plutonium oxalate precipitates. The results show that the plutonium oxide particles have a significant increase in pore volume fraction while retaining the exterior morphological shape of the corresponding oxalate precipitates. This technique enables the examination of the internal structure of radioactive microparticles for nuclear forensics that is not available with conventional microscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Characterization of hypervelocity metal fragments for explosive initiation

The fragment impact response of two plastic-bonded explosive (PBX) formulations was studied using explosively driven aluminum fragments. A generic aluminum-capped detonator generated sub-mm aluminum particles moving at hypersonic velocities. The ability of these fragments to initiate reaction or otherwise damage two PBX materials was assessed using go/no-go experiments at standoff distances of up to 160 mm. Lower density PBX 9407 (RDX-based) was initiable at up to 115 mm, while higher density PBX 9501 (HMX-based) was only initiable at up to 6 mm. Several techniques were used to characterize the size, distribution, and velocity of the particles. Witness plate materials, including copper and polycarbonate, and backlit high speed video were used to characterize the distribution of particles, finding that the aluminum cap did not fragment homogeneously but rather with larger particles in a ring surrounding finer particles. Finally, precise digital holography experiments were conducted to measure the three-dimensional shape and size of the fastest-moving fragments, which ranged between 100 and 700 μm and traveled between 2.2 and 3.2 km/s. Crucially, these experiments showed variability in the fragmentation in terms of the number of fragments at the leading edge of the fragment field, indicating that both single and multiple shock impacts could be imparted to the target material. As a result, these types of data are critical for safety experiments and hydrocode simulations to quantify shock-to-detonation transition mechanisms and the associated risk-margins for these materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Shape fluctuations and optical transition of He 2 * excimer tracers in superfluid He 4

Metastable He$_{2}^{*}$ excimer molecules have been utilized as tracer particles of the normal component in superfluid $^4$He (He II) which can be imaged via laser-induced fluorescence. These excimer molecules form tiny bubbles in He II and can bind to quantized vortices at sufficiently low temperatures, thereby allowing for direct visualization of vortex dynamics in an inviscid superfluid. However, the $a^{3}\Sigma^+_{u}$${\rightarrow}$$c^{3}\Sigma^+_{g}$ optical absorption line, which is responsible for the fluorescence imaging of the He$_{2}^{*}$ molecules, is controlled by fluctuations on the bubble shape, and its exact line profile is not known at low temperatures. In this paper, we present a bubble model for evaluating the surface fluctuation eigenmodes of the excimers in He II. The line profile of the $a^{3}\Sigma^+_{u}{\rightarrow}c^{3}\Sigma^+_{g}$ transition is calculated at different temperatures by considering both the zero-point and thermal fluctuations on the bubble shape. We show that, as the temperature drops from 2~K to 20 mK, the peak absorption strength is enhanced by a factor of about five, accompanying a blueshift of the peak location by about 2 nm. A double-peak line profile due to the rotational levels of the molecular core can be resolved. This bubble model also allows us to evaluate the stiffness of the He$_{2}^{*}$ bubbles and hence their diffusion constant in He II due to scattering off thermal phonons. Our results will aid the design of future experiments on imaging quantized vortices in He II using He$_{2}^{*}$ tracers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Nuclear shape evolution based on microscopic level densities

Here, by combining microscopically calculated level densities with the Metropolis walk method, we develop a consistent framework for treating the energy and angular-momentum dependence of the nuclear shape evolution in the fission process. For each nucleus under consideration, the level density is calculated microscopically for each of more than five million shapes with a recently developed combinatorial method. The method employs the same single-particle levels as those used for the extraction of the pairing and shell contributions to the macroscopic-microscopic deformation-energy surface. Containing no new parameters, the treatment is suitable for elucidating the energy dependence of the dynamics of warm nuclei on pairing and shell effects. It is illustrated for the fission fragment mass distribution for several uranium and plutonium isotopes of particular interest.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2018

Radiation of Gas Layer over Hot Surface

A method is presented for evaluation the radiation flux produced by a gas layer near a heated surface, where the gas temperature depends on a distance from the surface. This method refers to small temperature gradients and operates with an effective radiation temperature for each frequency, as well as with the width of the gas absorption band. These parameters are determined by the absorption spectrum of atoms or gas molecules, and also by the shape of the spectral line for the radiative transition between certain states of atomic particles of a gas. The possibilities of this method are demonstrated by examples of emission of photons from the solar photosphere, as well as emission of CO{sub 2} molecules in the atmospheres of the Earth and Venus.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

New levels in spherical 96 Y

New transitions in neutron rich 96 Y have been identified by analyzing the high statistics γ-γ-γ and γ-γ-γ-γ coincidence data from the spontaneous fission of 252 Cf at the Gammasphere detector array. Shell model calculations were performed and are found in good agreement with experimental data. In conclusion, the ground state is nearly spherical but a new excited band has large deformation.

252Cf↗
DOE OSTI2021

Intentional Uranium Tagging for Material Provenance and Pathway Forensics (LA19-Intentional-Forensics-NDD3Bb) (Annual Report for FY21)

This report describes the outcomes of the third and final year of a project to research the feasibility of tagging uranium materials, especially nuclear fuels. The experimental focus remained on metallic uranium forms under prospective surface and bulk tagging scenarios. Overall, the results showed that the tags could be successfully imparted and characterized in both as-built and degraded conditions. This was in line with expectations coming into this project, indicating promise for both surface and bulk tagging of metallic forms of uranium. Multiple surface tagging techniques and detection strategies were explored in FY21, with an emphasis on improving tag quality, readability, and detection in the field. Non-radioactive materials were used as a testbed. Selective deposition via laser beam was determined to be successful in imparting a readable titanium deposit on a stainless steel base plate, and can be read with high resolution characterization techniques (e.g., scanning electron microscopy) and field capable tools (e.g., eddy current testing). Other deposition techniques, such as selective deposition via electron beam and photoluminescent tags, were explored in FY21, and while success for these techniques would be dependent on additional work, these techniques showed potential for surface tagging applications. To survey bulk taggant elements for bulk uranium metal, 16 tagging elements were spread among 18 depleted uranium castings (4 baseline, 3 mix, 1 dilution, and 10 recycle). Most of these were made and characterized in FY21. Taggant acceptability was based upon manufacturability, detectability, and persistence from the standpoint of two detection options: bulk chemical analysis (for “chemical taggants”) and microstructural analysis (for “second phase taggants”). Taggant detection in both up-front manufacturing and in the face of “degradations” such as dilution, mixing, and recycling was generally good. Two independent laboratories carried out chemical analysis on most of the castings, and often at several locations within a casting, and the results are discussed. Scanning electron microscopy+EDS microanalysis revealed the second phases mostly contained the expected tagging elements. The shapes and 2 spatial distributions of these micron-sized carbides, oxides, and intermetallic particles offers opportunities for further science-based investigation and tagging optimization. Overall, V and Co currently appear as the best choices for chemical taggants while Al, Ti, Mn, Co, Pd, and Tb all look good as second phase taggants. The other elements considered here – Sc, Ni, Ge, Nb, Ce, Ta, W, Ir, and Au – while not being ruled out, require more study to become viable options. It is of special note that in the recycling study only one of the 12 elements fell out of detection even after 10 meltings, demonstrating their persistence. An Appendix tabulates all chemical analysis results to enable more quantitative and statistical studies of detection opportunities and limitations, as a part of a related project.

36 MATERIALS SCIENCE↗
NASA NTRS1972

Cosmic influences on the early history of the lunar surface.

The testimony which the main features of the lunar surface bear on the cosmic environment in which the satellite acquired its principal morphological characteristics is examined. It is assumed as a working hypothesis that, in the earliest stages of the moon's history, the lunar sculpture in the continental areas was predominantly shaped by external impacts. It is considered that the argument against heliocentric orbits of particles whose collisions with the moon disfigured most of its continental areas continues to hold good. The distribution of craters due to oblique impacts appears to be essentially at random all over the lunar surface.

Kopal, Z.↗
NASA NTRS1976

Far-infrared observations of IRC + 10216

Broadband photometric observations of IRC + 10216 in five wavelength intervals from 50 to 1000 microns are reported. The observed radiation is interpreted as thermal emission from dust in the extended molecular cloud heated by the compact 2-20-micron source at the cloud core. The shape of the 50-1000-micron spectrum suggests that the emissivity of the dust particles varies approximately as the inverse wavelength over this spectral interval. The mass of dust inferred from the far-infrared emission is comparable with the mass of heavy molecules in the cloud.

Campbell, M. P.↗
NASA NTRS1982

The sputtering of insulating materials by fast heavy ions

In this paper recent experimental results on sputtering of UF4 and H2O (ice) by fast heavy ions are reviewed. Measurements have been made of the dependence of the sputtering yield on the incident ion type, charge state, and energy. In the case of UF4, the energy spectra of neutral sputtered particles have been obtained as well. There is a clear dependence of the sputtering yield on the electronic part of the stopping power, and the yield is strongly affected by the charge state of the incident ion, which shows that in the near-surface region from which sputtered particles arise, the charge state of the incident ion has not reached equilibrium. The shape of the energy spectra observed for UF4 targets is that expected from a thermal distribution rather than that of the collision cascade form typical of ordinary sputtering. A model of the sputtering-track registration process that has arisen from these data is shown to provide a framework of understanding the close relationship of these observations to the 'plasma desorption' of marcromolecules.

Seiberling, L. E.↗
NASA NTRS1985

Seeding subsonic, transonic and supersonic flows with 0.5 micron polystyrene spheres

Polystyrene latex particles have been successfully used as laser velocimetry seed material for flows in the Ames High Reynolds Channels (HR) 1 and 2, the pilot channel, and the one-foot low speed tunnel. These facilities provide test flows with Mach numbers from 0.1 to 3.0 and test section sizes from 4 inches by 6 inches to 18 inches by 24 inches. Tunnel mass flow in the HR-2 channel can approach 1000 lb/sec. The latex particles have the following favorable characteristics: size of 0.35 to 0.55 microns diameter; spherical shape; specific gravity of 1.05; excellent flow trackability; low toxicity; and low cost. they have the disadvantage of being packaged as an aqueous suspension which must be diluted and introduced into the test flow as an atomized mist. This must occur sufficiently far upstream of the test section to minimize flow disturbances and permit the liquid mist to evaporate before reaching the model. Several techniques which have been developed to accomplish satisfactory seeding will be described.

Seegmiller, H. L.↗
NASA NTRS1991

Microstructure and mechanical properties of a single crystal NiAl alloy with Zr or Hf rich G-phase precipitates

The possibility of producing NiAl reinforced with the G-phase (Ni16X6Si7), where X is Zr or Hf, has been investigated. The microstructure of these NiAl alloys have been characterized in the as-cast and annealed conditions. The G-phases are present as fine cuboidal precipitates (10 to 40 nm) and have lattice parameters almost four times that of NiAl. They are coherent with the matrix and fairly resistant to coarsening during annealing heat treatments. Segregation and nonuniform precipitate distribution observed in as-cast materials were eliminated by homogenization at temperatures near 1600 K. Slow cooling from these temperatures resulted in large plate shaped precipitates, denuded zones, and a loss of coherency in some of the large particles. Faster cooling produced a homogeneous fine distribution of cuboidal G-phase particles in the matrix. Preliminary mechanical properties for the Zr-doped alloy are presented and compared to binary single crystal NiAl. The presence of these precipitates appears to have an important strengthening effect at temperatures not less than 1000 K compared to binary NiAl single crystals.

Locci, I. E.↗
NASA NTRS2000

Numerical Calculation of the Drag Force Acting on an Insoluble Particle Moving in Front of a Solidifying Interface

The distribution of insoluble particles in a metal casting depends primarily on the interaction of the particles with the solid/liquid interface (SLI) during the solidification process. Whether a particle will be engulfed or continuously pushed by SLI is essentially determined by the balance of forces acting on the particle. An important component of this force balance is the drag force generated by the particle motion in front of the SLI. Previously developed mathematical models for particle/SLI interaction made use of steady-state solutions of this force provided by the lubrication theory. However, our numerical model based on the SLI tracking approach shows that not only the steady-state approach is inappropriate to model the interaction process but also that even at steady-state the theoretical solution underestimates the drag force. A regression analysis of steady-state numerical solutions for cylindrical particles moving normal to a flat SLI gave a relationship of the form F(sub d) (exp num) = (square root of 3) pi eta V(sub p)((R(sub p) / d) (exp 10 gamma/3)) as compared to the theoretical solution F(sub d) (exp theor) = 3 X (square root of 2) pi eta V(sub p)((R(sub p) / d) (exp 3/2)) where F(sub d) is the drag force, eta is the dynamic viscosity of the fluid, V(sub p) is the particle velocity, R(sub p) is the particle radius, gamma is Euler's constant (gamma is approximately equal to 0.577), and d is the width of the gap between the particle and the SLI. Model validation as well as the influence of the interface shape on the value of F(sub d) will also be discussed.

Catalina, Adrian V.↗