Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Pressure-Induced Exciton Formation and Superconductivity in Platinum-Based Mineral Sperrylite

We report a comprehensive study of Sperrylite (PtAs 2 ), the main platinum source in natural minerals, as a function of applied pressures up to 150 GPa. While no structural phase transition is detected from pressure-dependent X-ray measurements, the unit cell volume shrinks monotonically with pressure following the third-order Birch–Murnaghan equation of state. The mildly semiconducting behavior found in pure synthesized crystals at ambient pressures becomes more insulating upon increasing the applied pressure before metalizing at higher pressures, giving way to the appearance of an abrupt decrease in resistance near 3 K at pressures above 92 GPa consistent with the onset of a superconducing phase. The pressure evolution of the calculated electronic band structure reveals the same physical trend as our transport measurements, with a non-monotonic evolution explained by a hole band that is pushed below the Fermi energy and an electron band that approaches it as a function of pressure, both reaching a touching point suggestive of an excitonic state. A Lifshitz transition of the electronic structure and an increase in the density of states may naturally explain the onset of superconductivity in this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gas Requirements in Pressurized Transfer of Liquid Hydrogen

Of late, liquid hydrogen has become a very popular fuel for space missions. It is being used in such programs as Centaur and Saturn. Furthermore, hydrogen is the ideal working fluid for nuclear powered space vehicles currently under development. In these applications, liquid hydrogen fuel is generally transferred to the combustion chamber by a combination of pumping and pressurization. The pump forces the liquid propellant from the fuel tank to the combustion chamber; gaseous pressurant holds tank pressure sufficiently high to prevent cavitation at the pump inlet and to maintain the structural rigidity of the tank. The pressurizing system, composed of pressurant, tankage, and associated hardware can be a large portion of the total vehicle weight. Pressurant weight can be reduced by introducing the pressurizing gas at temperatures substantially greater than those of liquid hydrogen. Heat and mass transfer processes thereby induced complicate gas requirements during discharge. These requirements must be known to insure proper design of the pressurizing system. The aim of this paper is to develop from basic mass and energy transfer processes a general method to predict helium and hydrogen gas usage for the pressurized transfer of liquid hydrogen. This required an analytical and experimental investigation, the results of which are described in this paper.

GAS↗

Novel High Temperature Capacitive Pressure Sensor Utilizing SiC Integrated Circuit Twin Ring Oscillators

This paper describes initial development and testing of a novel high temperature capacitive pressure sensor system. The pressure sensor system consists of two 4H-SiC 11-stage ring oscillators and a SiCN capacitive pressure sensor. One oscillator has the capacitive pressure sensor fixed at one node in its feedback loop and varies as a function of pressure and temperature while the other provides a pressure-independent reference frequency which can be used to temperature compensate the output of the first oscillator. A two-day repeatability test was performed up to 500C on the oscillators and the oscillator fundamental frequency changed by only 1. The SiCN capacitive pressure sensor was characterized at room temperature from 0 to 300 psi. The sensor had an initial capacitance of 3.76 pF at 0 psi and 1.75 pF at 300 psi corresponding to a 54 change in capacitance. The integrated pressure sensor system was characterized from 0 to 300 psi in steps of 50 psi over a temperature range of 25 to 500C. The pressure sensor system sensitivity was 0.113 kHzpsi at 25C and 0.026 kHzpsi at 500C.

high temperature↗

Pressure-induced alpha to omega transition in titanium metal: a systematic study of the effects of uniaxial stress

The effects of uniaxial stress on the pressure-induced {alpha} {yields} {omega} transition in pure titanium (Ti) are investigated by means of angle dispersive X-ray diffraction in a diamond-anvil cell. Experiments under four different pressure environments reveal that: (1) the onset of the transition depends on the pressure medium used, going from 4.9 GPa (no pressure medium) to 10.5 GPa (argon pressure medium); (2) the {alpha} and {omega} phases coexist over a rather large pressure range, which depends on the pressure medium employed; (3) the hysteresis and quenchability of the {omega} phase is affected by differences in the sample pressure environment; and (4) a short-term laser heating of Ti lowers the {alpha} {yields} {omega} transition pressure. Possible transition mechanisms are discussed in the light of the present results, which clearly demonstrate the influence of uniaxial stress in the {alpha} {yields} {omega} transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Grid pressure drop prediction in a fuel assembly

In fuel assembly, spacer grids have strong effects on pressure drop and other thermal-hydraulic behaviors. Considering the design and safety operation of a reactor, it is important to predict pressure drop accurately in the fuel assembly. For a mixed core, a reactor with mixed fuel designs in the reactor core, undesired cross flow were often caused by differences in pressure drop among neighboring bundles. The pressure drop is often estimated for designs of new reactor core fuel assemblies. In the past, due to complex flow conditions in fuel assembly, the pressure drop of a fuel assembly relied greatly on costly and time-consuming full length thermal hydraulic tests. Some empirical pressure drop correlations and CFD methodology were applied, however, only limited to a single gird span. Without considering pressure drop in the entire fuel assembly it is quite difficult to optimize the fuel assembly design. Most experimental fuel assemblies consist of mixing vane grids (MVG) and simple support grids (SSG). The MVG's were the main tested spacer grids in the reactor and SSG's were used only in experimental study to support the fuel assembly. In fuel reactor core, the fuel assembly heats the coolant, which could turn the single-phase water system into a two-phase flow system and eventually lead to critical heat flux (CHF). Because of the complexity of phase change, it is very difficult to predict pressure drop in rod bundles with two-phase flow. In this paper, a new method to predict the pressure drop in the fuel assembly is proposed and verified by experimental data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The high pressure crystal structures of tin sulphate: a case study for maximal information recovery from 2D powder diffraction data

Our recently proposed method for automatic detection, calibration and evaluation of Debye-Scherrer ellipses using pattern recognition techniques and advanced signal filtering was applied to 2D powder diffraction data of tin sulphate in dependence on pressure. Three phase transitions towards higher pressure could be identified, and their respective crystal structures have been determined. The high pressure behaviour of the stereoactive lone pair of Sn{sup 2+} was investigated. At ambient conditions, SnSO{sub 4} crystallizes in a strongly distorted Barite structure type in space group Pnma (phase I). In the pressure range between P = 0.15 and P = 0.2 GPa, it exhibits a displacive second order phase transition into a structure with space group P112{sub 1}/a (phase II at P = 0.2 GPa: a = 8.7022(9) {angstrom}, b = 5.3393(5) {angstrom}, c = 7.0511(6) A, y = 89.90(1){sup o}). A second displacive phase transition occurs between P = 4.40 and P = 5.07 GPa into another structure with space group PI (phase III at P = 13.5 GPa: a = 8.067(3) {angstrom}, b = 5.141(2) {angstrom}, c = 6.609(2) {angstrom}, a = 90.56(3){sup o}, {beta} = 90.65(2){sup o}, y = 89.46(2){sup o}). A third displacive phase transition towards another crystal structure in space group P1 occurs between P = 13.6 and P = 15.3 GPa (phase IV at P = 20.5 GPa: a = 7.889(5) {angstrom}, b = 5.028(3) {angstrom}, c = 6.462(3) {angstrom}, a = 90.99(3){sup o}, {beta}=91.01(3){sup o}, y = 89.89(4){sup o}). A non-linear compression behaviour over the entire pressure range is observed, which can be described by three Vinet relations in the ranges from P = 0.21 to 4.4 GPa, from P = 5.07 to 13.55 GPa and from P = 15.26 to 20.5 GPa. The extrapolated bulk moduli of the high-pressure phases were determined to K{sub 0} = 48(1) GPa for phase II, K{sub 0} = 56(2) GPa for phase III, and K{sub 0} = 51(13) GPa for phase IV. The crystal structures of all phases are refined against X-ray powder diffraction data measured at several pressures between 0.15 and 20.5 GPa. The structural phase transitions of SnSO{sub 4} are mainly characterized by a reorientation of the SO{sub 4} tetrahedra, in order to optimize crystal packing. With increasing pressure, the lone pair which is localized at Sn{sup 2+} increasingly adopts pure s-character.

36 MATERIALS SCIENCE↗

Static pressure drives proliferation of vascular smooth muscle cells via caveolin-1/ERK1/2 pathway

Intimal hyperplasia plays an important role in various types of vascular remodeling. Mechanical forces derived from blood flow are associated with the proliferation of vascular smooth muscle cells (VSMC). This contributes to many vascular disorders such as hypertension, atherosclerosis and restenosis after percutaneous transluminal angioplasty (PTA). In this study, we show that static pressure induces the proliferation of VSMC and activates its related signal pathway. VSMC from a rat aorta were treated with different pressures (0, 60, 90, 120, 150 and 180 mm Hg) in a custom-made pressure incubator for 24 h. The most active proliferation of VSMC was detected at a pressure of 120 mm Hg. VSMC was also incubated under a static pressure of 120 mm Hg for different time intervals (0, 2, 4, 8, 12 and 24 h). We found that static pressure significantly stimulates VSMC proliferation. Extracellular signal-regulated kinases 1/2 (ERK1/2) activation showed a peak at the pressure of 120 mm Hg at 4-h time point. Moreover, caveolin-1 expression was significantly inhibited by rising static pressure. Downregulation of VSMC proliferation could be found after PD98059 (ERK1/2 phosphorylation inhibitor) treatment. Our data also showed that a siRNA-mediated caveolin-1 knock down increased ERK1/2 phosphorylation and VSMC proliferation. These results demonstrate that static pressure promotes VSMC proliferation via the Caveolin-1/ERK1/2 pathway.

60 APPLIED LIFE SCIENCES↗

In situ observation of irradiation-induced enhancement to the desorption pressure of zirconium hydride in a nuclear reactor

We quantify the effect of a nuclear-reactor environment on the hydrogen isotope equilibrium vapor pressure over pure zirconium and zirconium hydride. A vacuum-sealed capsule containing a zirconium foil with 6 atom% deuterium was irradiated at a neutron flux of ~10 14 cm -2 s -1 at the University of Missouri Research Reactor (MURR). The internal stainless-steel (SS) sample holder acted as the heat source via gamma absorption. To measure low desorption pressures in a high-flux environment, we developed a method to transduce pressure from the measured sample temperature during irradiation, calibrating with known deuterium pressures in unirradiated capsules at various heating powers using an internal filament-heated system designed to mimic irradiation-induced heating. Our temperature-pressure transduction method operates similarly to a Pirani or thermocouple pressure gauge. The in-reactor measurements revealed a roughly 4-fold enhancement in desorption pressure after only 6 h of irradiation (~2 × 10 18 cm -2 neutron fluence) compared to thermal desorption in control experiments, indicating a nonthermal contribution from neutron irradiation. The slower temperature/pressure stabilization rate in the reactor suggests that desorption pressure enhancement increases with neutron fluence. Further, this enhancement signifies increased solubility of hydrogen isotopes in zirconium during irradiation. We propose that high-energy neutron collisions with hydrogen isotopes in hydrides lead to their decomposition at lower temperatures, supersaturating the surrounding αZr lattice and resulting in higher desorption pressure, which continues to rise as more hydrides dissolve with increasing neutron fluence.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

In situ observations of temperature- and pressure-induced phase transitions in TiH[subscript 2]: Angle-dispersive and synchrotron energy-dispersive X-ray diffraction studies

We investigated the behavior of the structure of titanium hydride (TiH{sub 2}), an important compound in hydrogen storage research, at elevated temperatures (0-120 C) and high pressures (1 bar-34 GPa). Temperature-induced changes of TiH{sub 2} as indicated in the alteration of the ambient X-ray demonstrated a cubic to tetragonal phase transition occurring at about 17 C. The main focus of this study was to identify any pressure-induced structural transformations, including possible phase transitions, in TiH{sub 2}. Synchrotron X-ray diffraction studies were carried out in situ (diamond anvil cell) in a compression sequence up to 34 GPa and in subsequent decompression to ambient pressure. The pressure evolution of the diffraction patterns revealed a cubic (Fm-3m) to tetragonal (I4/mmm) phase transition at 2.2 GPa. The high-pressure phase persisted up to 34 GPa. After decompression to ambient conditions the observed phase transition was completely reversible. A Birch-Murnaghan fit of the unit cell volume as a function of pressure yielded a zero-pressure bulk modulus K{sub 0} = 146(14) GPa, and its pressure derivative K{prime}{sub 0} = 6(1) for the high-pressure tetragonal phase of TiH{sub 2}.

08 HYDROGEN↗

Structural phase transitions of SrF{sub 2} at high pressure

The high-pressure behavior of SrF{sub 2} has been investigated by angle-dispersive synchrotron X-ray powder diffraction measurement up to 50.3 GPa at room temperature. Two phase transformations were observed at 6.8 and 29.5 GPa, and the two high pressure phases were identified as orthorhombic (Pnma) phase and hexagonal (P6{sub 3}/mmc) phase by Rietveld refinement. Upon decompression, retransformation was observed and the sample recovered under ambient conditions consisted of a mixture of cubic phase and orthorhombic phase. The compressing characteristics of SrF{sub 2} as the pressure increases were discussed, indicating higher incompressibility of SrF{sub 2} under high pressure. - Graphical abstract: The high-pressure behavior of SrF{sub 2} has been investigated by angle-dispersive synchrotron X-ray powder diffraction measurement up to 50.3 GPa at room temperature. Highlights: Black-Right-Pointing-Pointer The high-pressure study on SrF{sub 2} up to 50.3 GPa at room temperature. Black-Right-Pointing-Pointer Two first-order phase transformations were observed at 6.8 and 29.5 GPa. Black-Right-Pointing-Pointer The three stable structures are confirmed by Rietveld refinements. Black-Right-Pointing-Pointer The cubic and orthorhombic phase co-exist at pressures down to ambient pressure. Black-Right-Pointing-Pointer The bulk modulus indicates higher incompressibility of SrF{sub 2} under high pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic and optical properties of TiCoSb under different pressures

The electronic structure and optical properties of TiCoSb are studied by the first-principles calculation. It is found that the band gaps increase with the pressure increasing. It is noted that the increase of the band gap is due to the electrons of Ti 3d and Co 3d of the valence band (VB) shifting away from the Fermi level. Our calculation indicates that TiCoSb has the large density of state near the Fermi level; moreover, the changes of the density of states near the Fermi level mainly are caused by Ti 3d and Co 3d under the different pressures. It is noted that the absorption edge increases with an increase of pressure. As pressure increases, the static dielectric constants {epsilon}{sub 1}(0) decrease. All peaks of the imaginary part of the dielectric function {epsilon}{sub 2}({omega}) move towards higher energies within increasing pressure. - Graphical abstract: The first peak positions of the absorption spectrum increase and shift the high energy with an increase of pressure. The buleshift of the absorption edge could be observed. Highlights: Black-Right-Pointing-Pointer It is noted that the increase of the band gap is due to the electrons of Ti 3d and Co 3d of VB moving away from the Fermi level. Black-Right-Pointing-Pointer It is noted that the absorption edge increases with an increase of pressure. Black-Right-Pointing-Pointer As pressure increases, the static dielectric constant {epsilon}{sub 1}(0) decreases. Black-Right-Pointing-Pointer All peaks of the imaginary part of the dielectric function {epsilon}{sub 2}({omega}) move to wards higher energies within creasing pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Molecules under Pressure with Gaussian Potentials

The computational modeling of molecules under high pressure is a growing research area that augments experimental high-pressure chemistry. Here, a new electronic structure method for modeling atoms and molecules under pressure, Gaussians On Surface Tesserae Simulate HYdrostatic Pressure (GOSTSHYP) approach, is introduced. In this method, a set of Gaussian potentials is distributed evenly on the van der Waals surface of the investigated chemical system, leading to a compression of the electron density and the atomic scaffold. Since no parameters other than pressure need to be specified, GOSTSHYP allows straightforward geometry optimizations and ab initio molecular dynamics simulations of chemical systems under pressure for nonexpert users. In this work, calculated energies, bond lengths, and dipole moments under pressure fall within the range of established computational methods for high-pressure chemistry. A Diels-Alder reaction and the cyclotrimerization of acetylene showcase the ability of GOSTSHYP to model pressure-induced chemical reactions. The connection to mechanochemistry is pointed out.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure Dependence of the Boson Peak of Glassy Glycerol

The pressure dependence of the Boson peak (BP) of glycerol, including its behavior across the liquid-glass transition, has been studied under pressure using Raman scattering. A significant increase of the BP frequency was observed with pressure up to 11 GPa at room temperature. The pressure dependence of BP frequency ν BP is proportional to (1+P/P 0 ) 1/3 , where P and P 0 are the pressure and a constant, respectively, the spectra are consistent with a soft potential model. The characteristic length of medium range order is close in size to a cyclic trimer of glycerol molecules, which is predicted as the medium range order of a BP vibration using molecular dynamics simulations. The pressure dependence of a characteristic length of medium range order is nearly constant. The pressure induced structural changes in glycerol can be understood in terms of the shrinkage of voids with cyclic trimers remaining up to at least 11 GPa. Lastly, the pressure dependence of intermolecular O-H stretching mode indicates that the intermolecular hydrogen bond distance gradually decreases below the glass transition pressure of ~5 GPa, while it becomes nearly constant in the glassy state indicating the disappearance of the free volume in the dense glass.

36 MATERIALS SCIENCE↗

Novel physical solvents for selective CO{sub 2} capture from fuel gas streams at elevated pressures and temperatures

Three perfluorinated compounds (PFCs), PP10, PP11, and PP25, manufactured by F2 Chemicals Ltd., U.K., were investigated as physical solvents for selective CO{sub 2} capture from synthesis gas or syngas streams at elevated pressures and temperatures. The equilibrium solubility, the hydrodynamic, and the mass-transfer parameters of CO{sub 2} in the solvents were measured in a 4-L ZipperClave agitated reactor under wide ranges of operating conditions: pressures (6-30 bar), temperatures (300-500 K), mixing speeds (10-20 Hz), and liquid heights (0.14-0.22 m). The CO{sub 2} solubilities in the three solvents decreased with an increasing temperature at constant pressure and followed Henry's law. The CO{sub 2} solubilities in PP25 were greater than those in PP10 and PP11. The volumetric liquid-side mass-transfer coefficients (k{sub La}) of CO{sub 2} in the PFCs increased with mixing speed, pressure, and temperature. Also, the gas-liquid interfacial areas of CO{sub 2} in the three PFCs appeared to control the behavior of k{sub La}. This study proved the thermal and chemical stability and the ability of the PFCs to selectively absorb CO{sub 2} at temperatures up to 500 K and pressures as high as 30 bar. A preliminary conceptual process design using PP25 for selective CO{sub 2} capture from hot-shifted gas with pressure-swing and pressure-temperature-swing regeneration options was devised. The pressure-temperature-swing option led to greater PP25 solvent loss but a more favorable (more negative) net enthalpy than the pressure-swing option. However, for either regeneration option to be economically viable, the PP25 solvent must be completely recovered from the process. 109 refs., 9 figs., 14 tabs.

01 COAL, LIGNITE, AND PEAT↗

Pressure-Modulated Energy Transfer Dynamics in Mn 2+ -Doped CdS/ZnS Core/Shell Quantum Dots

Transition metal doping in semiconductor quantum dots (QDs) significantly impacts their optical properties, thus expanding the range of their potential optoelectronic applications. This study investigates the pressure-dependent energy transfer dynamics in Mn 2+ -doped CdS/ZnS core/shell QDs, focusing on how external hydrostatic pressure modulates these dynamics and optical properties. By synthesizing Mn 2+ -doped QDs with varying Mn 2+ doping concentrations, we explore the effects of the pressure on photoluminescence (PL) spectra and energy transfer efficiency. Our study reveals that increasing pressure induces a blueshift in the QD host bandgap PL and a redshift in the Mn 2+ dopant PL. The pressure-induced shifts highlight a unique modulation mechanism where the energy transfer efficiency decreases with pressure due to reduced wave function overlap between host excitons and Mn 2+ dopants. Detailed analysis of the PL quantum yields and energy transfer rate constants provides insights into these dynamics, suggesting that the pressure can effectively and reversibly regulate the energy transfer efficiencies and rates. In conclusion, these results have implications for developing pressure-sensitive configurable devices and exploring pressure-induced phenomena in doped nanomaterials.

36 MATERIALS SCIENCE↗

Planar Defect Layers Template a High-Pressure InBi Polymorph

The short- and long-range order of III–V materials under high pressure has long been the subject of debate, with advancements in structural characterization leading to significant revisions to the accepted structural models. Despite these revisions, previous high-pressure structural assignments in the In–Bi system include the site-disordered β-Sn structure type, a structure type demonstrated to be nonexistent in analogous III–V systems. While X-ray diffraction is consistent with site disordering in InBi at high pressure, cluster expansion calculations indicate that disordering requires temperatures above 3000 K. Here, we propose InBi as a model material for studying unique high-pressure planar defects due to its highly anisotropic stress-dependent properties and structure. Specifically, we identify two sets of planar defects that mimic the diffraction pattern of a site disordered β-Sn structure type and are compatible with the calculated disorder barrier. We derive these defects by symmetry relations over crystallographic transitions. Density functional theory calculations of the proposed defects suggest that these defects are stabilized by diminishing interlayer separations with pressure. Further, we find that one of the proposed defects closely resembles a bulk high-pressure phase of InBi, InBi-ϵ, and we assert that the proposed defects order upon heating, acting as a template for InBi-ϵ growth. The proposed defects and their electronic structure provide a basis for the trend of superconducting critical temperature with increasing pressure. These methods for identifying defects are generalizable to other materials with reports of site disorder at high pressure, prompting a broader search for related high-pressure defects.

36 MATERIALS SCIENCE↗

Pressure Dependent Decomposition Kinetics of the Energetic Material HMX up to 3.6 GPa

The effect of pressure on the thermal decomposition rate of the energetic material HMX was studied. HMX was precompressed in a diamond anvil cell (DAC) and heated at various rates. The parent species population was monitored as a function of time and temperature using Fourier transform infrared (FTIR) spectroscopy. Decomposition rates were determined by fitting the fraction reacted to the extended-Prout-Tompkins nucleation-growth model and the Friedman isoconversional method. The results of these experiments and analysis indicate that pressure accelerates the decomposition at low to moderate pressures (i.e. between ambient pressure and 1 GPa) and decelerates the decomposition at higher pressures. The decomposition acceleration is attributed to pressure enhanced autocatalysis whereas the deceleration at high pressures is attributed pressure inhibiting bond homolysis step(s), which would result in an increase in volume. These results indicate that both {beta} and {delta} phase HMX are sensitive to pressure in the thermally induced decomposition kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure-induced suppression of charge density phases across the entire rare-earth tritellurides by optical spectroscopy

The rare-earth tritellurides (RTe 3 ) are a distinct class of 2D layered materials that recently gained significant attention due to hosting such quantum collective phenomena as superconductivity or charge density waves (CDWs). Many members of this van der Waals (vdW) family crystals exhibit CDW behavior at room temperature, i.e., RTe 3 compound where R = La, Ce, Pr, Nd, Sm, Gd, and Tb. Here, our systematic studies establish the CDW properties of RTe 3 when the vdW spacing/interaction strength between adjacent RTe 3 layers is engineered under extreme hydrostatic pressures. Using a non-destructive spectroscopy technique, pressure-dependent Raman studies first establish the pressure coefficients of phonon and CDW amplitude modes for a variety of RTe 3 materials, including LaTe 3 , CeTe 3 , PrTe 3 , NdTe 3 , SmTe 3 , GdTe 3 , and TbTe 3 . Results further show that the CDW phase is eventually suppressed at high pressures when the interlayer spacing is reduced and interaction strength is increased. Comparison between different RTe 3 materials shows that LaTe 3 with the largest thermodynamic equilibrium interlayer spacing (smallest chemical pressure) exhibits the most stable CDW phases at high pressures. In contrast, CDW phases in late RTe 3 systems with the largest internal chemical pressures are suppressed easily with applied pressure. Overall results provide comprehensive insights into the CDW response of the entire RTe 3 series under extreme pressures, offering an understanding of CDW formation/engineering in a unique class of vdW RTe 3 material systems.

36 MATERIALS SCIENCE↗