Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Modeling of Zircon (ZrSiO{sub 4}) and Zirconia (ZrO{sub 2}) using ADF-GUI Software

Natural zircon (ZrSiO{sub 4}) has very high concentration of Uranium and Thorium of up to 5000 ppm. Radioactive decay process of alpha particles from these impurities affects some changes like several atomic displacements in the crystalline structure of zircon. The amount of track density caused by alpha particles decay process of these radioactive materials in zircon can be decreased with annealing temperatures from 700 deg. C to 980 deg. C. Recently it has been extensively studied as the possible candidate material for immobilization of fission products and actinides. Besides, zirconia (ZrO{sub 2}), product from natural zircon, is widely used in industrial field because it has excellent chemical and mechanical properties at high temperature. Dielectric constant of monoclinic, cubic and tetragonal ZrO{sub 2} can be found in the range of 22, 35 and 50 by computer simulation works. In recent years, atomistic simulations and modeling have been studied, because a lot of computational techniques can offer atomic-level approaching with minimum errors in estimations. One favorite methods is Density Functional Theory (DFT). In this study, ADF-GUI software from DFT will be used to calculate the frequency and absorption Intensity of zircon and zirconia molecules. The data from calculations will be verified with experimental works such as Raman Spectroscopy, AFM and XRD.

36 MATERIALS SCIENCE↗

Effects of Cr/Zn Substitutions on Dielectric Properties of CaCu{sub 3}Ti{sub 4}O{sub 12}(CCTO) Ceramics

Effects of Zn and Cr substitutions on dielectric properties of CaCu{sub 3-x}Zn{sub x}Ti{sub 4-y}Cr{sub y}O{sub 12} ceramics are reported. Dielectric measurements at room temperature for un-substituted CaCu{sub 3-x}Zn{sub x}Ti{sub 4-y}Cr{sub y}O{sub 12}(x = 0, y = 0) between 10{sup 2}-10{sup 6} Hz showed dielectric constant of 2.7x10{sup 4} at 10{sup 2} Hz. Substitution of Zn for Cu in CaCu{sub 3-x}Zn{sub xTi{sub 4{sub -{sub yCr{sub yO{sub 1{sub 2}}}}}}}(y = 0, x = 0.10, 0.50)caused dielectric constant to drop with increasing x. Cr substitution at Ti-site in CaCu{sub 3-x}Zn{sub xTi{sub 4{sub -{sub yCr{sub yO{sub 1{sub 2}}}}}}}(x = 0, x = 0,) also caused decrease in dielectric constant. However, at x = 0.50, the dielectric constant at low frequency was enhanced compared to the un-substituted sample. Our results indicate that Cu and Ti sites play an important role in the formation of Internal Barrier Layer Capacitance (IBLC) in CCTO.

36 MATERIALS SCIENCE↗

Electromagnetic bound states in the radiation continuum for periodic double arrays of subwavelength dielectric cylinders

Electromagnetic bound states in the radiation continuum are studied for periodic double arrays of subwavelength dielectric cylinders in TM polarization. They are similar to localized waveguide mode solutions of Maxwell's equations for metal cavities or defects of photonic crystals, but, in contrast to the latter, their spectrum lies in the radiation continuum. The phenomenon is identical to the existence of bound states in the radiation continuum in quantum mechanics, discovered by von Neumann and Wigner. In the formal scattering theory, these states appear as resonances with the vanishing width. For the system studied, the bound states are shown to exist at specific distances between the arrays in the spectral region where one or two diffraction channels are open. Analytic solutions are obtained for all bound states (below the radiation continuum and in it) in the limit of thin cylinders (the cylinder radius is much smaller than the wavelength). The existence of bound states is also established in the spectral region where three and more diffraction channels are open, provided the dielectric constant and radius of the cylinders are fine-tuned. The near field and scattering resonances of the structure are investigated when the distance between the arrays varies in a neighborhood of its critical values at which the bound states are formed. In particular, it is shown that the near field in the scattering process becomes significantly amplified in specific regions of the array as the distance approaches its critical values. The effect may be used to control optical nonlinear effects by varying the distance between the arrays near its critical values.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of a dielectric thin film on the photodetachment of H{sup -} near a metal surface

The photodetachment of H{sup -} near a metal surface covered with a dielectric thin film has been studied using the closed orbit theory. The results show that the thickness and the dielectric constant of the dielectric thin film have great effect on the photodetachment of negative ion. For a given dielectric thin film, with the increase in the thickness of the film, the amplitude of oscillation of the cross section becomes strengthened and the oscillation frequency becomes decreased. If we fix the thickness of the film and vary the dielectric constant, we find the oscillating amplitude of the cross section is also changed. With the increase in the dielectric constant, the oscillating amplitude in the cross section becomes increased first and then gets decreased. This study provides a new understanding and will guide the future experiment study on the photodetachment process of negative ion in the presence of a coarse metal surface.

36 MATERIALS SCIENCE↗

Optical function evolution of ion-assisted ZrN films deposited by sputtering

The optical functions (complex dielectric function, complex index of refraction, and complex conductivity) of sputtered zirconium nitride films are derived starting from optical reflectance measurements. Their evolution with the different bias voltages applied during the films growth is used to deduce information about the variations in the electronic structure influenced by a different oxygen and nitrogen content in the films. Improvement in the electrical conductivity is observed at increasing bias voltage due to a reduction in both oxygen contamination and nitrogen content. The separation of the different contributions (free conduction electrons and different electronic transitions) in the optical functions is achieved through the Drude-Lorentz model, allowing the detection of an unusual low-energy electronic transition in films grown at low bias voltages. Through considerations about the electronic structure and about the results coming from other characterization techniques, this transition can be ascribed to the presence of defects/impurities, nitrogen superstoichiometry, or oxygen contamination.

36 MATERIALS SCIENCE↗

Guiding of intense laser pulse in uniform plasmas and preformed plasma channels

Guiding of laser pulse in uniform plasmas and preformed plasma channels is investigated. The self-guiding mechanisms for these two cases are quite different. It is found that an intense laser pulse can be steadily self-guided in underdense plasmas with nearly a constant spot size if the self-consistently generated electron cavity has a sufficiently steep density gradient at the edge. In a preformed plasma channel, however, laser guiding is maintained mainly by the balance between the light diffraction and focusing. The latter is induced by the wall plasmas which greatly reduce the local dielectric constant. It is shown that the self-guiding of a laser pulse in uniform plasmas requires tens of terawatts power, but those that are in preformed channels can be realized with only a terawatt power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generalized dispersion relation for electron Bernstein waves in a non-Maxwellian magnetized anisotropic plasma

A generalized dielectric constant for the electron Bernstein waves using non-Maxwellian distribution functions is derived in a collisionless, uniform magnetized plasma. Using the Neumann series expansion for the products of Bessel functions, we can derive the dispersion relations for both kappa and the generalized (r,q) distributions in a straightforward manner. The dispersion relations now become dependent upon the spectral indices {kappa} and (r,q) for the kappa and the generalized (r,q) distribution, respectively. Our results show how the non-Maxwellian dispersion curves deviate from the Maxwellian depending upon the values of the spectral indices chosen. It may be noted that the (r,q) dispersion relation is reduced to the kappa distribution for r=0 and q={kappa}+1, which, in turn, is further reducible to the Maxwellian distribution for {kappa}{yields}{infinity}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Low-temperature crystal structure, specific heat, and dielectric properties of lithium tetraborate Li{sub 2}B{sub 4}O{sub 7}

Coherent neutron powder diffraction experiments were carried out together with specific heat, dilatometry, and dielectric spectroscopy studies on Li{sub 2}B{sub 4}O{sub 7} enriched with {sup 11}B isotope to 99.3% at low temperatures. Neither traces of phase transformations nor discontinuous changes in physical properties were observed. Negative thermal expansion, anomalous thermal behavior of selected interatomic distances/angles, isotropic displacement parameters on specific sites as well as dielectric constant were discussed in terms of dynamic lithium disorder.

36 MATERIALS SCIENCE↗

Heteroepitaxy of single-crystal LaLuO{sub 3} on GaAs(111)A by atomic layer deposition

We demonstrate that LaLuO{sub 3} films can be grown epitaxially on sulfur-passivated GaAs(111)A substrates by atomic layer deposition (ALD). Transmission electron microscopy and x-ray diffraction analyses reveal that the oxide film exhibits a cubic structure with a lattice mismatch of -3.8% relative to GaAs. The epitaxial layer has a high degree of crystalline perfection and is relaxed. Electrical characterizations performed on this structure show interfaces with a low interface state density of {approx}7x10{sup 11} cm{sup -2} eV{sup -1}. The measured dielectric constant is around 30, which is close to its bulk crystalline value. In contrast, ALD LaLuO{sub 3} is polycrystalline on GaAs(100) and amorphous on Si(111).

36 MATERIALS SCIENCE↗

A Comparative Study on AC Conductivity and Dielectric Behavior of Multiwalled Carbon Nanotubes and Polyaniline Coated Multiwalled Carbon Nanotubes Filled High Density Polyethylene-Carbon Black Nanocomposites

This paper presents an experimental investigation on AC conductivity and dielectric behavior of carbon black reinforced high density polyethylene (HDPE-CB) and HDPE-CB filled with multiwalled carbon nanotubes (MWNTs-CB-HDPE) and Polyaniline (PAni) coated MWNTs-CB-HDPE nanocomposites. The electrical properties such as dielectric constant ({epsilon}'), dissipation factor (tan {delta}) and AC conductivity ({sigma}{sub ac}) of nanocomposites have been measured with reference to the weight fraction (0.5 and 1 wt% MWNTs), frequency (75 KHz-30 MHz), temperature (25-90 deg. C) and sea water ageing. The experimental results showed that the increased AC conductivity and dielectric constant of the nanocomposites were influenced by PAni coated MWNTs in HDPE-CB nanocomposites. The value of dielectric constant and tan {delta} decreased with increasing frequency. Further more, above 5 MHz the AC conductivity increases drastically whereas significant effect on tan {delta} was observed in less than 1 MHz.

36 MATERIALS SCIENCE↗

Dependency of temperature on polarization in CH{sub 4}/N{sub 2} dielectric barrier discharge plasma: A crude assumption

We have investigated the variations of polarization (P) and the temperature ({Delta}T) at the electrode surfaces during the deposition of C-N layer in CH{sub 4}/N{sub 2} (1:2) dielectric barrier discharge plasma. The reactive deposition process influences the surface temperature, polarization, and the value of the in situ dielectric constant. We have developed a crude model that correlates the surface temperature and surface polarization with thin film properties. We assume that during the thin film deposition process, the atomic mean kinetic energy is equal to the electrostatic energy stored in the electrode surface area. Theoretically estimated temperature is found to agree well with the experimental results. However, the linear model thus developed cannot be used to explain the phenomena in the interfacial polarization stage that requires a nonlinear theory.

36 MATERIALS SCIENCE↗

Plasma damage effects on low-k porous organosilicate glass

Damage induced in low-k porous organosilicate glass (SiCOH) dielectric films by exposure to an electron cyclotron resonance (ECR) plasma was investigated. The effects of charged-particle bombardment and vacuum ultraviolet radiation were separated. Flux measurements showed that the ECR plasma has a greater photon flux in the vacuum ultraviolet (VUV) range than in the UV range. Damage was measured by examining the surface potential and capacitance-voltage characteristics after exposure. It was found that during argon ECR plasma processing, 75% of the charge accumulation comes from ions at the surface, while 25% of the charge accumulation occurs from charge trapped within the bulk of the dielectric film. The charge accumulation can be modified by changing the bias voltage of the wafer chuck. UV exposure was shown to repair both sources of damage. Fourier transform infrared (FTIR) spectroscopy results showed no significant change except for Si-(CH{sub 3}){sub x} bonds. It was found that both charged-particle bombardment and radiation from the ECR plasma damage these bonds. Ellipsometric measurements showed that both the dielectric thickness and the dielectric constant changed during plasma exposure. In addition, both plasma-induced swelling and UV-exposure shrinking effects were observed. The plasma-induced swelling occurs at the surface of the dielectric without changing the porosity of the dielectric, while UV-induced shrinking changes the porosity significantly.

36 MATERIALS SCIENCE↗

Broadening of optical transitions in polycrystalline CdS and CdTe thin films

The dielectric functions {epsilon} of polycrystalline CdS and CdTe thin films sputter deposited onto Si wafers were measured from 0.75 to 6.5 eV by in situ spectroscopic ellipsometry. Differences in {epsilon} due to processing variations are well understood using an excited carrier scattering model. For each sample, a carrier mean free path {lambda} is defined that is found to be inversely proportional to the broadening of each of the band structure critical points (CPs) deduced from {epsilon}. The rate at which broadening occurs with {lambda}{sup -1} is different for each CP, enabling a carrier group speed {upsilon}{sub g} to be identified for the CP. With the database for {upsilon}{sub g}, {epsilon} can be analyzed to evaluate the quality of materials used in CdS/CdTe photovoltaic heterojunctions.

36 MATERIALS SCIENCE↗

Phase transitions of sodium niobate powder and ceramics, prepared by solid state synthesis

Phase transitions of sodium niobate, prepared by the solid state synthesis method, were examined using dielectric measurements, differential scanning calorimetry, and high temperature x-ray diffraction, in order to contribute to the clarification of its structural behavior below 400 deg. C. Four phase transitions were detected in the ceramic sample using dielectric measurements and differential scanning calorimetry and the obtained temperatures were in a good agreement with previous reports for the transitions of the P polymorph. The anomaly observed by dielectric measurements in the vicinity of 150 deg. C was frequency dependent and could be related to the dynamics of the ferroelectric nanoregions. The phase transitions of the as-synthesized NaNbO{sub 3} powder were investigated using differential scanning calorimetry and high temperature x-ray diffraction. The results show the existence of the Q polymorph at room temperature, not previously reported for the powder, which undergoes a transition to the R polymorph upon heating through a temperature region between 265 and 326.5 deg. C. This transition is mainly related to the displacement of Na into a more symmetric position and a minor change in the tilting system. The structures at room temperature, 250, 300, and 420 deg. C were refined by the Rietveld method and the evolution of the tilting system of the octahedral network and cationic displacement are reported.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Percolative properties in ferroelectric-dielectric composite ceramics

Percolative properties in dielectric (DE) tunability were observed in three ferroelectric (FE)-DE composite ceramics as follows: xBa{sub 0.5}Sr{sub 0.5}TiO{sub 3}-MgO, xBa{sub 0.4}Sr{sub 0.6}TiO{sub 3}-Mg{sub 2}TiO{sub 4}, and xBa{sub 0.5}Sr{sub 0.5}TiO{sub 3}-Mg{sub 3}B{sub 2}O{sub 6}. Dielectric constants of the composites increased monotonously with increasing volume fractions of FE component. Comparatively, their DE tunabilities exhibited a weak dependence on FE concentrations over a wide range. However, their tunabilities started to decrease substantially below a critical concentration of FE. The critical concentrations were 40 vol % for Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3}-MgO, 38 vol % for Ba{sub 0.4}Sr{sub 0.6}TiO{sub 3}-Mg{sub 2}TiO{sub 4}, and 33 vol % for Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3}-Mg{sub 3}B{sub 2}O{sub 6}. These results could be used as a guide to tailor the properties of FE-DE composites for tunable device applications.

36 MATERIALS SCIENCE↗

Thin film colossal dielectric constant oxide La{sub 2-x}Sr{sub x}NiO{sub 4}: Synthesis, dielectric relaxation measurements, and electrode effects

We have successfully synthesized the colossal dielectric constant oxide La{sub 2-x}Sr{sub x}NiO{sub 4} in thin film form by reactive cosputtering from metallic targets and careful annealing protocols. Composition and phase purity was determined through energy dispersive spectra and x-ray diffraction, respectively. The dielectric constant exceeds values of over 20 000 up to 1 kHz and the activation energy for the frequency-independent conductivity plateau was extracted to be approximately 155 meV from 300 to 473 K, both in agreement with measurements conducted on bulk single crystals. However, unlike in single crystals, we observe early onset of relaxation in thin films indicating the crucial role of grain boundaries in influencing the dielectric response. ac conductivity at varying temperatures is analyzed within the framework of the universal dielectric law leading to an exponent of approximately 0.3, dependent on the electrode material. Impedance spectroscopy with electrodes of different work function (Pt, Pd, and Ag) was further carried out as a function of temperature and applied bias to provide mechanistic insights into the nature of the dielectric response.

36 MATERIALS SCIENCE↗