Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxidation behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Influence of Domain Size and Support Composition on the Reducibility of SiO 2 and TiO 2 Supported Tungsten Oxide Clusters

Supported tungsten oxides are widely used in a variety of catalytic reactions. Depending on the support, the cluster size, oxidation state, reducibility and speciation of the tungsten oxides can widely differ. When promoted with a platinum group metal, the resulting spillover of hydrogen may facilitate the reduction of supported tungsten oxide species, depending on the support. High resolution scanning transmission electron microscopy imaging showed nanometer scale WO x clusters were synthesized on SiO 2 whereas highly dispersed species were formed on TiO 2 . Results from H 2 -temperature-programmed reduction showed the presence of Pd lowered the initial reduction temperature of SiO 2 -supported WO x species but interestingly did not affect that of TiO 2 -supported WO x . X-ray photoelectron and absorption spectroscopies showed the W atoms in SiO 2 -supported WO x species reduce from a +6 oxidation state to primarily +5 after thermal treatment in 5% H 2 , while the fraction of W in the +5 oxidation state was relatively unaffected by reduction treatment of TiO 2 -supported WO x . The unusual behavior of TiO 2 -supported WO x was explained by quantum chemical calculations that reveal the lack of change in the oxidation state of W is attributed to charge delocalization on the surface atoms of the titania support, which does not occur on silica. Moreover, modeling results at <600 K in the presence of H 2 suggest the formation of Brønsted acid sites, and the absence of Lewis acid sites, on larger aggregates of WO x on silica and all cluster sizes on titania. These results provide experimental and theoretical insights into the nature of supported tungsten oxide clusters under conditions relevant to various catalytic reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facet-Dependent Rock-Salt Reconstruction on the Surface of Layered Oxide Cathodes

The surface configuration of pristine layered oxide cathode particles for Li-ion batteries significantly affects the electrochemical behavior, which is generally considered to be a thin rock-salt layer in the surface. Unfortunately, aside from its thin nature and spatial location on the surface, the true structural nature of this surface rock-salt layer remains largely unknown, creating the need to understand its configuration and the underlying mechanisms of formation. Using scanning transmission electron microscopy, we have found a correlation between the surface rock-salt formation and the crystal facets on pristine LiNi0.80Co0.15Al0.05O2 primary particles. It is found that the originally (01 $ \overline{4}\ $) and (003) surfaces of the layered phase result in two kinds of rock-salt reconstructions: the (002) and (111) rock-salt surfaces, respectively. Stepped surface configurations are generated for both reconstructions. The (002) configuration is relatively flat with monoatomic steps while the (111) configuration shows significant surface roughening. Both reconstructions reduce the ionic and electronic conductivity of the cathode, leading to a reduced electrochemical performance.

Environmental Molecular Sciences Laboratory↗

No Signature of Room Temperature Ferromagnetism in Fe-Doped ITO Thin Films

Iron (Fe)-doped indium tin oxide thin films (In{sub 0.95 − x}Fe{sub x}Sn{sub 0.05}){sub 2}O{sub 3} at x = 0.00, 0.05, 0.10, and 0.15 were deposited onto glass substrates using an electron beam evaporation technique. The coated thin films were characterized by X-ray diffractometer (XRD), UV-VIS-NIR spectrophotometer, photoluminescence spectrophotometer, scanning electron microscope, and vibrating sample magnetometer to study their structural, optical, morphological, and magnetic properties, respectively. The crystallite size of the films increased from 18 to 30 nm with Fe concentration (x). The morphology showed the formation of nanorods. The bandgap of the films decreased from 3.94 to 3.81 eV. The X-ray photoelectron spectroscopy (XPS) studies confirm the presence of Fe ions in two different oxidation states (Fe{sup 2+}, Fe{sup 3+}). The magnetic studies revealed the paramagnetic behavior of the films at room temperature and at low temperature (5 K). The effective magnetic moment (μ{sub eff}) of Fe-doped indium tin oxide thin films was calculated using Langevin theory of paramagnetism extending to Curie’s law. The effective magnetic moment (μ{sub eff}) was increased on increasing the dopant concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Subsequent R + O 2 Chemistry of Intermediates Formed in Low-Temperature R + O 2 Reactions: Potential Importance in Modeling Autoignition Behavior

Comprehensive chemical kinetics models used in the simulation of hydrocarbon and biofuel oxidation rely on accurate prescription of the underlying reaction mechanisms and rate parameters of associated elementary reactions. For practical transportation fuels, such models contain thousands of elementary reactions, which collectively define chain-initiation, -propagation, -branching, and -inhibition pathways. In the low-temperature regime, below approximately 1000 K where R + O 2 reactions dominate, primary oxidation intermediates including cyclic ethers, carbonyls, and conjugate alkenes are formed in abundance via unimolecular decomposition of either chemically activated or thermalized radicals, specifically organic peroxy (ROO) or hydroperoxyalkyl species (QOOH). Experimental results from multiplexed photoionization mass spectrometry (MPIMS) experiments are detailed herein for several intermediates, derived initially from R + O 2 reactions of hydrocarbons and biofuels, and show that intermediate species formed in the initial steps of oxidation undergo similar reactions to those of the parent molecule, including through QOOH-mediated pathways. Products from QOOH decomposition via chain-inhibition and chain-propagation pathways, namely conjugate alkenes, carbonyls, and cyclic ethers, are detected directly. Despite such rich chemistry involving QOOH radicals, most comprehensive chemical kinetics models neglect the complete description of primary oxidation intermediates, and rather consider a restricted number of reaction pathways. It is suggested that exclusion of the details of the oxidation of these intermediate products may affect the interpretation of combustion simulations using such models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigations of the small-scale thermal behavior of sol-gel thermites.

Sol-gel thermites, formulated from nanoporous oxides and dispersed fuel particles, may provide materials useful for small-scale, intense thermal sources, but understanding the factors affecting performance is critical prior to use. Work was conducted on understanding the synthesis conditions, thermal treatments, and additives that lead to different performance characteristics in iron oxide sol-gel thermites. Additionally, the safety properties of sol-gel thermites were investigated, especially those related to air sensitivity. Sol-gel thermites were synthesized using a variety of different techniques and there appear to be many viable routes to relatively equivalent thermites. These thermites were subjected to several different thermal treatments under argon in a differential scanning calorimeter, and it was shown that a 65 C hold for up to 200 minutes was effective for the removal of residual solvent, thus preventing boiling during the final thermal activation step. Vacuum-drying prior to this heating was shown to be even more effective at removing residual solvent. The addition of aluminum and molybdenum trioxide (MoO{sub 3}) reduced the total heat release per unit mass upon exposure to air, probably due to a decrease in the amount of reduced iron oxide species in the thermite. For the thermal activation step of heat treatment, three different temperatures were investigated. Thermal activation at 200 C resulted in increased ignition sensitivity over thermal activation at 232 C, and thermal activation at 300 C resulted in non-ignitable material. Non-sol-gel iron oxide did not exhibit any of the air-sensitivity observed in sol-gel iron oxide. In the DSC experiments, no bulk ignition of sol-gel thermites was observed upon exposure to air after thermal activation in argon; however ignition did occur when the material was heated in air after thermal treatment. In larger-scale experiments, up to a few hundred milligrams, no ignition was observed upon exposure to air after thermal activation in vacuum; however ignition by resistively-heated tungsten wire was possible. Thin films of thermite were fabricated using a dispersed mixture of aluminum and iron oxide particles, but ignition and propagation of these films was difficult. The only ignition and propagation observed was in a preheated sample.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Understanding of catalytic behaviors of TiO2/CuOx catalysts

Aiming to reveal the catalysis at the metal-oxide and oxide-oxide interfaces,1,2 the water-gas shift reaction (WGS, CO + H2O and #61664; CO2 + H2) and CO oxidation (2CO + O2 and #61664; 2CO2) at the interface of the Cu(111) and Cu2O(111) supported TiO2 clusters were studied based on DFT calculations

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical modeling of the uranium 4f XPS for U(VI) and U(IV) oxides

A rigorous study is presented of the physical processes related to X-Ray photoelectron spectroscopy, XPS, in the 4f level of U oxides, which, as well as being of physical interest in themselves, are representative of XPS in heavy metal oxides. In particular, we present compelling evidence for a new view of the screening of core-holes that extends prior understandings. Our analysis of the screening focuses on the covalent mixing of high lying U and O orbitals as opposed to the, more common, use of orbitals that are nominally pure U or pure O. It is shown that this covalent mixing is quite different for the initial and final, core-hole, configurations and that this difference is directly related to the XPS satellite intensity. Furthermore, we show that the high-lying U d orbitals as well as the U(5f) orbital may both contribute to the core-hole screening, in contrast with previous work that has only considered screening through the U(5f) shell. The role of modifying the U-O interaction by changing the U-O distance has been investigated and an unexpected correlation between U-O distance and XPS satellite intensity has been discovered. The role of flourite and octahedral crystal structures for U(IV) oxides has been examined and relationships established between XPS features and the covalent interactions in the different structures. The physical views of XPS satellites as arising from shake processes or as arising from ligand to metal charge transfers are contrasted; our analysis provides strong support that shake processes give a more fundamental physical understanding than charge transfer. Our theoretical studies are based on rigorous, strictly ab initio determinations of the electronic structure of embedded cluster models of U oxides with formal U(VI) and U(IV) oxidation states. Our results provide a foundation that makes it possible to establish quantitative relationships between features of the XPS spectra and materials properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Semi-volatile and highly oxygenated gaseous and particulate organic compounds observed above a boreal forest canopy

Abstract. We present hourly online observations of molecular compositions (CxHyOzN0−1) and abundances of oxygenated organic species in gas and submicron particle phases from April to June of 2014 as part of the Biogenic Aerosols-Effects on Cloud and Climate (BAECC) campaign. Measurements were made using the Filter Inlet for Gases and AEROsols coupled to a high-resolution time-of-flight iodide-adduct ionization mass spectrometer (FIGAERO-CIMS) located atop a 35 m tall tower, about 10 m above a boreal forest canopy at the SMEAR II research station in Hyytiälä, Finland. Semi-volatile and highly oxygenated multifunctional (HOM) organic species possessing from 1 up to 20 carbon atoms, and with as few as 2 and as many as 16 oxygen atoms, were routinely observed. Utilizing non-negative matrix factorization, we determined that > 90 and > 99 % of the organic mass in the gas and particle phases, respectively, exhibited one of three distinct diel trends: one in which abundances were enhanced at daytime, another in the early morning hours, and thirdly during nighttime. Particulate organic nitrates contributed ∼ 35 % to the total organic aerosol mass loading at night during BAECC, much higher than observed by the same instrument package at a mixed-deciduous forest site in the southeastern US that experienced higher nighttime concentrations of nitrogen oxides. Unique HOM monomers (defined here as those with 10 carbon and 7 or more oxygen atoms) and dimers (at least 16 carbon atoms), with and without a nitrogen atom, were found in most of the three subgroups of both phases. We show the potential to connect these groupings of compounds based on their distinct behavior in time to the expected chemical conditions (biogenic VOC precursor, oxidant type, etc.) responsible for their production. A suite of nitrated dimer-like compounds was detected in both the gas and particle phases, suggesting a potential role for the formation of low-volatility organics from NO3-radical-driven, as well as daytime NO-influenced, monoterpene chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulating hindered grain boundary diffusion using the smoothed boundary method

Abstract Grain boundaries can greatly affect the transport properties of polycrystalline materials, particularly when the grain size approaches the nanoscale. While grain boundaries often enhance diffusion by providing a fast pathway for chemical transport, some material systems, such as those of solid oxide fuel cells and battery cathode particles, exhibit the opposite behavior, where grain boundaries act to hinder diffusion. To facilitate the study of systems with hindered grain boundary diffusion, we propose a model that utilizes the smoothed boundary method to simulate the dynamic concentration evolution in polycrystalline systems. The model employs domain parameters with diffuse interfaces to describe the grains, thereby enabling solutions with explicit consideration of their complex geometries. The intrinsic error arising from the diffuse interface approach employed in our proposed model is explored by comparing the results against a sharp interface model for a variety of parameter sets. Finally, two case studies are considered to demonstrate potential applications of the model. First, a nanocrystalline yttria-stabilized zirconia solid oxide fuel cell system is investigated, and the effective diffusivities are extracted from the simulation results and are compared to the values obtained through mean-field approximations. Second, the concentration evolution during lithiation of a polycrystalline battery cathode particle is simulated to demonstrate the method’s capability.

Materials Science↗

Interfacial control of oxygen vacancy doping and electrical conduction in thin film oxide heterostructures

Oxygen vacancies in proximity to surfaces and heterointerfaces in oxide thin film heterostructures have major effects on properties, resulting, for example, in emergent conduction behaviour, large changes in metal-insulator transition temperatures or enhanced catalytic activity. Here we report the discovery of a means of reversibly controlling the oxygen vacancy concentration and distribution in oxide heterostructures consisting of electronically conducting In2O3 films grown on ionically conducting Y2O3-stabilized ZrO2 substrates. Oxygen ion redistribution across the heterointerface is induced using an applied electric field oriented in the plane of the interface, resulting in controlled oxygen vacancy (and hence electron) doping of the film and possible orders-of-magnitude enhancement of the film's electrical conduction. The reversible modified behaviour is dependent on interface properties and is attained without cation doping or changes in the gas environment.

Veal, Boyd W.↗

Emissions measurements for a lean premixed propane/air system at pressures up to 30 atmospheres

A series of experiments was conducted in which the emissions of a lean premixed system of propane and air were measured at pressures of 5, 10, 20 and 30 atm in a flametube apparatus. Measurements were made for inlet temperatures between 600K and 1000K and combustor residence times from 1.0 to 3.0 msec. A schematic of the test rig is presented along with graphs showing emissions measurements for nitric oxide, carbon monoxide, and UHC as functions of bustor residence time for various equivalence ratios, entrance temperatures and pressures; typical behavior of emissions as a function of equivalence ratio for a fixed residence time. Correlations of nitric oxide emission index with adiabatic flame temperature for a fixed residence time of 2 msec and pressures from 5 to 30 atm; and adiabatic flame temperature corresponding to CO breakpoint conditions for 2 msec residence time as a function of inlet temperature.

Roffe, G.↗

Morphology and Electronic Structure of the Oxide Shell on the Surface of Iron Nanoparticles

A iron nanoparticle exposed to air at room temperature will be instantly covered by an oxide shell of typical thickness of ~ 3 nm. This native oxide shell in combination with an underlying iron core determines the physical and chemical behavior of this type of core-shell nanoparticles. One of the great challenges for characterizing this type of nanoparticles is determination of the structure of the oxide shell, as it is FeO, Fe 3 O 4 , γ-Fe 2 O 3 , α-Fe 2 O 3 , or anything else. Significant research effort, mostly based on x-ray diffraction and spectroscopy and electron diffraction and transmission electron microscopy imaging, has been made to determine the structure of this thin layer of iron oxide. Most of the experimental results have been framed with one of the known iron oxide structures, although it is not necessarily true that this thin layer of iron oxide consists of a standard iron oxide. In this paper, the structure of the oxide shell on iron nanoparticle is probed using electron energy loss spectroscopy (EELS) at O K-edge with a spatial resolution of several nanometers (individual particle). Two types of representative particles were studied: particles that are fully oxidized and core-shell particle which possesses a Fe core. We found that the O K-edge spectra collected on the oxide shell in the nanoparticles shows distinctive differences as compared with that of the known iron oxide. Based on finger printing and quantum mechanical calculations results, we conclude that the distances between the absorbing oxygen and the next-nearest neighbor oxygens are more widely distributed than that in bulk Fe 3 O 4 for both of these two types of particles. For smaller and fully oxidized particles, there is also a broadened distribution between the absorbing oxygen and the nearest neighbor oxygens. These results clearly demonstrate that the coordination configuration in the oxide shell on Fe nanoparticle is defective as compared with that of their bulk counterpart. Of the two types particles examined in this work, the degree of disorder is larger for the smaller fully oxidized particles.

36 MATERIALS SCIENCE↗

Consideration of materials for aircraft brakes

A study has been made of the frictional behavior of several aircraft brake materials using a simple high-temperature Falex-type apparatus. Tests were run at velocities of seven ft/minute; loads to 600 pounds and temperatures to 700 C. The data for these brake materials sliding against a variety of steels and other materials indicate a large reduction in friction due to surface oxidation in the temperature range 250 to 300 C. It also was found that the retention of this oxide was a function of the temperature changes. With increasing temperature the oxide was removed, while with reducing temperature it was retained. Frictional behavior was more characteristic of the steel than the brake material.

Peterson, M. B.↗

Photoelectrochemical and photosensing behaviors of hydrothermally grown ZnO nanorods

ZnO nanorods have been grown on indium-tin-oxide coated glass substrates by a low cost chemical process. Current-voltage characteristics have been studied using ZnO nanorods as photoanode in an electrochemical cell. The flat band voltage shift and depletion width of ZnO nanorods/electrolyte interface have been estimated from Mott-Schottky (MS) characteristics. The electrochemical impedance measurements have been carried out to study the charge transport mechanism at the semiconductor-electrolyte interface under dark and white light (100 mW/cm{sup 2}) illumination. The doping concentration of nanorods has been extracted from MS plot. Photoresponse behavior of ZnO nanorods is found to be enhanced than seed layers with the incident of white light. Spectral dependent photovoltage of ZnO nanorods has been carried out using monochromatic light of wavelength 250–600 nm. The photopotential recovery time has been estimated for nanorods and seed layers. The stability of ZnO nanorods as a photoanode has been investigated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Schottky barrier height behavior of Pt-Ru alloy contacts on single-crystal n-ZnO

We investigated the Schottky barrier height (SBH) behavior of binary alloy Schottky contacts on n-type zinc oxide (n-ZnO) single crystals. Pt-Ru alloy electrodes were deposited on the Zn-polar and O-polar faces of ZnO substrates by combinatorial ion-beam deposition under identical conditions. The crystal structures of the Pt-Ru alloy film changed from the Pt phase (cubic structure) to the Ru phase (hexagonal structure) in the Pt-Ru alloy phase diagram with decreasing Pt content. The SBH, determined from current-voltage measurements, decreased with decreasing Pt content, indicating that the SBH behavior also followed the Pt-Ru alloy phase diagram. The alloy electrodes on the Zn-polar face showed better Schottky properties than those on the O-polar face. Hard x-ray photoelectron spectroscopy revealed a difference in the interface oxidization of the Pt-Ru alloy: the interface of the O-polar face and Pt-Ru mixed phase with poor crystallinity had a more oxidized layer than that of the Zn-polar face. As a result of this oxidization, the O-polar face, Pt-Ru mixed, and Ru phases showed poor Schottky properties.

36 MATERIALS SCIENCE↗

Environment of Metal–O–Fe Bonds Enabling High Activity in CO 2 Reduction on Single Metal Atoms and on Supported Nanoparticles

Single-atom catalysts are often reported to have catalytic properties that surpass those of nanoparticles, while a direct comparison of sites common and different for both is lacking. In this work, we show that single atoms of the Pt-group embedded into the surface of Fe 3 O 4 have a greatly enhanced interaction strength with CO 2 compared with Fe 3 O 4 surface. The strong CO 2 adsorption on single Rh atoms and corresponding low activation energies lead to two-orders-of-magnitude higher conversion rates of CO 2 compared to Rh nanoparticles. This high activity of single atoms stems from the partially oxidic state imposed by their coordination to the support. Fe 3 O 4 -supported Rh nanoparticles follow the behavior of single atoms for CO 2 interaction and reduction, which is attributed to the dominating role of partially oxidic sites at the Fe 3 O 4 -Rh interface. Thus, we show a likely common catalytic chemistry for two kinds of materials thought to be different, and we show that single atoms of Pt-group metals on Fe 3 O 4 are an especially successful material for catalyzed reactions that depend primarily upon sites with the metal-O-Fe environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unraveling the Effects of Melt–Mantle Interactions on the Gold Fertility of Magmas

The oxidation state of the Earth’s mantle and its partial melting products exert a key control on the behavior and distribution of sulfur and chalcophile and siderophile elements between the mantle and crust, underpinning models of ore deposit formation. Whether the oxidized nature of magmas is inherited from the asthenospheric mantle source or acquired during ascent and differentiation is vigorously debated, limiting our understanding of the mechanisms of extraction of sulfur and metals from the mantle. Here, we focused on the redox-sensitive behavior of sulfur in apatite crystallized from quenched alkaline basaltic melts preserved within a peridotite xenolith from the El Deseado Massif auriferous province in southern Patagonia. We took advantage of this unique setting to elucidate the redox evolution of melts during their ascent through the subcontinental lithospheric mantle (SCLM) and grasp the inner workings of the Earth’s mantle during gold metallogenesis. Our data reveal that an initially reduced silicate melt (ΔFMQ -2.2 to -1.2) was oxidized to ΔFMQ between 0 and 1.2 during percolation and interaction with the surrounding peridotite wall-rock (ΔFMQ 0 to +0.8). This process triggered changes in sulfur speciation and solubility in the silicate melt, boosting the potential of the melt to scavenge ore metals such as gold. We suggest that large redox gradients resulting from the interaction between ascending melts and the surrounding mantle can potentially modify the oxidation state of primitive melts and enhance their metallogenic fertility. Among other factors including an enriched metal source and favorable geodynamic conditions, redox gradients in the mantle may exert a first-order control on the global-scale localization of crustal provinces endowed with gold deposits.

58 GEOSCIENCES↗