Radio electronics
Low noise amplifiers, laser radar optics, gas lasers and holography, and microminiaturized solid state devices for radio electronics
LIDAR↗
SEARCH · Engineering Papers
Results for “Optical devices”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Cooled infrared telescope development
The feasibility of the design concept for a 1-m-aperture, cryogenically cooled telescope for Spacelab is assessed. The device makes use of double-folded Gregorian reflective optics. The planned cryogen is helium, and beryllium will be used for the 1.2 m primary mirror. Results of studies based on smaller instruments indicate that no new technology will be required to construct a Shuttle Infrared Telescope Facility which will offer improvement over the sensitivity of conventional telescopes by a factor of 1000 at 10 micrometers.
Young, L. S.↗
Microwave delay characteristics of Cassegrainian antennas
A technique is presented in which the time an RF signal is delayed in propagating through a Cassegrain antenna is determined. The technique utilizes the group delay time and the envelope delay time as found from the antenna transfer function. The calculations show that a focused antenna is basically a nondispersive device whose delay time may be found from an optics formula. Small subreflector displacements result in significant delay changes requiring calibrations for many applications.
Cha, A. G.↗
Imaging performance of a normal incidence soft X-ray telescope
Measurements are presented of the imaging performance of a normal incidence spherical soft X-ray mirror at BK-alpha (67.6 A). The reflector was a 124-layer coating consisting of alternating Re-W alloy and C layers with a protective C overcoat 34 A thick deposited on a Zerodur substrate. Measurements made at an angle of 1.5 deg off axis with the prototype of the Einstein Observatory high resolution imager reveal the resolution of the mirror to be about 1 arcsec FWHM, with 50% of the reflected power within the detector field of 512 arcsec contained within a diameter of 5 arcsec. The data demonstrate the practicality and potential good performance of normal-incidence soft X-ray optics, and show that the scattering performances of such devices may be as good or better than the best grazing incidence devices.
Henry, J. P.↗
Some solutions to the problems and pitfalls of laser velocimetry in a large transonic wind tunnel
Attention is given to engineering design and development features of a two-component, coaxial backscatter laser velocimetry system which attempts to realize the long-recognized desirability of this technique's use for nonintrusive flow measurement. The design of the optics for the present 16-foot transonic wind tunnel device, and problems associated with the installation of the system in the hostile, test section plenum chamber environment are discussed.
Reubush, D. E.↗
Integrated Laser and Light Detector
Proposed infrared optical transmitter tracks distant beacon and automatically point transmitted beam toward beacon. Essential transmitter is integrated gallium arsenide device containing electronically-steerable semiconductor injection laser and position detector that senses direction to beacon. With satisfactory optics and sufficient power, system used for long-distance transmission.
Katz, J.↗
Scintillator-fiber charged particle track-imaging detector
A scintillator-fiber charged-particle track-imaging detector was developed using a bundle of square cross section plastic scintillator fiber optics, proximity focused onto an image intensified charge injection device (CID) camera. The tracks of charged particle penetrating into the scintillator fiber bundle are projected onto the CID camera and the imaging information is read out in video format. The detector was exposed to beams of 15 MeV protons and relativistic Neon, Manganese, and Gold nuclei and images of their tracks were obtained. Details of the detector technique, properties of the tracks obtained, and preliminary range measurements of 15 MeV protons stopping in the fiber bundle are presented.
Binns, W. R.↗
Scintillator-fiber charged-particle track-imaging detector
A scintillator-fiber charged-particle track-imaging detector has been developed using a bundle of square cross-section plastic scintillator fiber optics, proximity focused onto an image intensified Charge Injection Device (CID) camera. Detector to beams of 15 MeV protons and relativistic Neon, Manganese, and Gold nuclei have been exposed and images of their tracks are obtained. This paper presents details of the detector technique, properties of the tracks obtained, and range measurements of 15 MeV protons stopping in the fiber bundle.
Binns, W. R.↗
Advanced optical position sensors for magnetically suspended wind tunnel models
A major concern to aerodynamicists has been the corruption of wind tunnel test data by model support structures, such as stings or struts. A technique for magnetically suspending wind tunnel models was considered by Tournier and Laurenceau (1957) in order to overcome this problem. This technique is now implemented with the aid of a Large Magnetic Suspension and Balance System (LMSBS) and advanced position sensors for measuring model attitude and position within the test section. Two different optical position sensors are discussed, taking into account a device based on the use of linear CCD arrays, and a device utilizing area CID cameras. Current techniques in image processing have been employed to develop target tracking algorithms capable of subpixel resolution for the sensors. The algorithms are discussed in detail, and some preliminary test results are reported.
Lafleur, S.↗
Research in millimeter wave techniques
The areas of millimeter wave (MMW) research include atmospheric propagation and radiometry, advanced MMW component design with emphasis on quasi-optical techniques, and the development of MMW receivers, especially those using subharmonic mixers. Calculations of atmospheric attenuation and radiometric antenna temperature were made in the range 100 to 700 GHz, together with measurements of atmospheric antenna temperature near 95 and 183 GHz. Quasi-optical components designed include lenses, mirrors, and wire grid devices, as well as feedhorns for interference with waveguide components. Subharmonic mixers with state-of-the-art performance at 183 GHz were also developed. Each of these areas of research is summarized.
Mcmillan, R. W.↗
Pointed telescope subassembly for the UARS High Resolution Doppler Imager
The Pointed Telescope Subassembly (PTS) consists of a telescope, its Coude relay optics, a two axis gimbal mechanism, and a cover/caging device. These components, their mechanisms, the requirements, and some of the trade-offs leading to the final design are described. The PTS supplies light to the interferometer of the High Resolution Doppler Imager to be used to study upper atmospheric wind velocity.
Renken, Robert D.↗
Optical correlator use at Johnson Space Center
For automation and robotics in the Space Station era, NASA's Johnson Space Center is pursuing several means of synthetic vision. The optical correlator is one such means. The deformable mirror device will form the basis of the first correlator in this project. In-house and contracted effort is being used. Initial in-house activities will concentrate on an impulse deconvolution technique and on a programmable retina for spatial remappings of an image prior to correlation. The retina will permit a form of edge extraction and other primitive operations. Additionally, it will be used as a research tool for assisting persons with low vision.
Juday, Richard D.↗
Solid-State Single-Photon Counter
Avalanche photodiode used to detect single photons if cooled to optimum temperature and overbiased beyond breakdown voltage. Offers two to three times sensitvity of photomultiplier tubes commonly used for photon detection. When cooled to reduce number of thermal carriers, avalanche photodiode reverse-biased beyond normal breakdown voltage to give it extremely-high internal gain of 10 to seventh power to 10 to eigth power. Advantages of solid-state devices to applications requiring low-level light detection, optical communication, astronomy, remote sensing, optical metrology, and optical signal processing.
Robinson, D. L.↗
256 x 256 PACE-1 PV HgCdTe focal plane arrays for medium and short wavelength infrared applications
The development of two 256 by 256 hybrid HgCdTe focal plane array (FPA) families is described, and their performance is discussed. The hybrid FPAs employ a PV HgCdTe detector array and custom Si CMOS readouts. The PACE-1 process was used to fabricate the detectors, whereby the liquid phase epitaxial growth of HgCdTe occurs on sapphire substrates buffered by a layer of CdTe. The performance characteristics of the detector arrays are given. A tactical 256 by 256 CMOS readout is tested, in which a high functional yield was achieved. Updated test results are given for a 256 by 256 readout circuit developed for use in an orbital replacement instrument for the Hubble Space Telescope. The characterizations of several MWIR and SWIR FPAs were thorough and shown to be reliable. The pixel yield, maximum FPA responsivity nonuniformity, and SWIR FPA read noise for the tests are given. The high contrast and insignificant fixed pattern noise of the imagery from the MWIR 256 by 256 FPA are emphasized. These qualities were obtained when the device was operating at 80 k and utilizing f/2 optics with an 8-in. focal length and a 4.4 micron high pass filter.
Kozlowski, L. J.↗
Photodetector Array For Neural Network
Integrated circuit performs 1,024 threshold operations in parallel. Designed for use in postprocessing output of optical correlator in optoelectronic neural network. Overall function of device to put out digital signals indicative of location(s) of bright spot(s) on detector plane. Response time less than commercial charge-coupled-device (CCD) imaging detector operating at standard television frame rate.
Langenbacher, Harry↗
Investigation of solar active regions at high resolution by balloon flights of the solar optical universal polarimeter, extended definition phase
Technical studies of the feasibility of balloon flights of the former Spacelab instrument, the Solar Optical Universal Polarimeter, with a modern charge-coupled device (CCD) camera, to study the structure and evolution of solar active regions at high resolution, are reviewed. In particular, different CCD cameras were used at ground-based solar observatories with the SOUP filter, to evaluate their performance and collect high resolution images. High resolution movies of the photosphere and chromosphere were successfully obtained using four different CCD cameras. Some of this data was collected in coordinated observations with the Yohkoh satellite during May-July, 1992, and they are being analyzed scientifically along with simultaneous X-ray observations.
Tarbell, Theodore D.↗
Advanced optical disk storage technology
There is a growing need within the Air Force for more and better data storage solutions. Rome Laboratory, the Air Force's Center of Excellence for C3I technology, has sponsored the development of a number of operational prototypes to deal with this growing problem. This paper will briefly summarize the various prototype developments with examples of full mil-spec and best commercial practice. These prototypes have successfully operated under severe space, airborne and tactical field environments. From a technical perspective these prototypes have included rewritable optical media ranging from a 5.25-inch diameter format up to the 14-inch diameter disk format. Implementations include an airborne sensor recorder, a deployable optical jukebox and a parallel array of optical disk drives. They include stand-alone peripheral devices to centralized, hierarchical storage management systems for distributed data processing applications.
Haritatos, Fred N.↗
Kinetics of Nucleation and Crystal Growth in Glass Forming Melts in Microgravity
This flight definition project has the specific objective of investigating the kinetics of nucleation and crystal growth in high temperature inorganic oxide, glass forming melts in microgravity. It is related to one of our previous NASA projects that was concerned with glass formation for high temperature containerless melts in microgravity. The previous work culminated in two experiments which were conducted aboard the space shuttle in 1983 and 1985 and which consisted of melting (at 1500 C) and cooling levitated 6 to 8 mm diameter spherical samples in a Single Axis Acoustic Levitator (SAAL) furnace. Compared to other types of materials, there have been relatively few experiments, 6 to 8, conducted on inorganic glasses in space. These experiments have been concerned with mass transport (alkali diffusion), containerless melting, critical cooling rate for glass formation, chemical homogeneity, fiber pulling, and crystallization of glass forming melts. One of the most important and consistent findings in all of these experiments has been that the glasses prepared in microgravity are more resistant to crystallization (better glass former) and more chemically homogeneous than equivalent glasses made on Earth (1 g). The chemical composition of the melt appears relatively unimportant since the same general results have been reported for oxide, fluoride and chalcogenide melts. These results for space-processed glasses have important implications, since glasses with a higher resistance to crystallization or higher chemical homogeneity than those attainable on Earth can significantly advance applications in areas such as fiber optics communications, high power laser glasses, and other photonic devices where glasses are the key functional materials.
Day, Delbert E.↗