Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “New physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Observation of Unconventional Dynamics of Domain Walls in Uniaxial Ferroelectric Lead Germanate

Application of scanning probe microscopy techniques such as piezoresponse force microscopy (PFM) opens the possibility to re-visit the ferroelectrics previously studied by the macroscopic electrical testing methods and establish a link between their local nanoscale characteristics and integral response. It is reported that the nanoscale PFM studies and phase-field modeling of the static and dynamic behavior of the domain structure in the well-known ferroelectric material lead germanate Pb 5 Ge 3 O 11 . Here, several unusual phenomena are revealed: 1) domain formation during the paraelectric-to-ferroelectric phase transition, which exhibits an atypical cooling rate dependence; 2) unexpected electrically induced formation of the oblate domains due to the preferential domain walls motion in the directions perpendicular to the polar axis, contrary to the typical domain growth behavior observed so far; 3) absence of the bound charges at the 180 degrees head-to-head (H-H) and tail-totail (T-T) domain walls, which typically exhibit a significant charge density in other ferroelectrics due to the polarization discontinuity. This strikingly different behavior is rationalized by the phase field modeling of the dynamics of uncharged H-H and T-T domain walls. The results provide a new insight into the emergent physics of the ferroelectric domain boundaries, revealing unusual properties not exhibited by conventional Ising-type walls.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Diurnal cycle of precipitation over the tropics and central United States: intercomparison of general circulation models

Diurnal precipitation is a fundamental mode of variability that climate models have difficulty in accurately simulating. Here, in this work, the diurnal cycle of precipitation (DCP) in participating climate models from the Global Energy and Water Exchanges' DCP project is evaluated over the tropics and central United States. Common model biases such as excessive precipitation over the tropics, too frequent light-to-moderate rain, and the failure to capture propagating convection in the central United States still exist. Over the central United States, the issues of too weak rainfall intensity in climate runs is well improved in their hindcast runs with initial conditions from numerical weather prediction analyses. But the improvement is minimal over the central Amazon. Incorporating the role of the large-scale environment in convective triggering processes helps resolve the phase-locking issue in many models where precipitation often incorrectly peaks near noon due to maximum insolation over land. Allowing air parcels to be lifted above the boundary layer improves the simulation of nocturnal precipitation which is often associated with the propagation of mesoscale systems. Including convective memory in cumulus parameterizations acts to suppress light-to-moderate rain and promote intense rainfall; however, it also weakens the diurnal variability. Simply increasing model resolution (with cumulus parameterizations still used) cannot fully resolve the biases of low-resolution climate models in DCP. The hierarchy modeling framework from this study is useful for identifying the missing physics in models and testing new development of model convective processes over different convective regimes.

58 GEOSCIENCES↗
DOE OSTI2025

Spatially Enhanced Electrostatic Doping in Graphene Realized via Heterointerfacial Precipitated Metals

Forming heavily-doped regions in 2D materials, like graphene, is a steppingstone to the design of emergent devices and heterostructures. Here, a selective-area approach is presented to tune the work-function and carrier density in monolayer graphene by spatially synthesizing sub-monolayer gallium beneath the 2D-solid. The localized metallic gallium is formed via precipitation from an underlying diamond-like carbon (DLC) film that is spatially implanted with gallium-ions. By controlling the interfacial precipitation process with annealing temperature, spatially precise ambipolar tuning of the graphene work-function is achieved, and the tunning effect preserved upon cooling to ambient conditions. Consequently, charge carrier densities from ≈1.8 × 10 10 cm -2 (hole-doped) to ≈7 × 10 13 cm -2 (electron-doped) are realized, confirmed by in situ and ex situ measurements. The theoretical studies corroborated the role of gallium at the heterointerface on charge transfer and electrostatic doping of the graphene overlayer. Specifically, sub-monolayer gallium facilitates heavy n-doping in graphene. Extending this doping strategy to other implantable elements in DLC provides a new means of exploring the physics and chemistry of highly-doped 2D materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Emergent Epitaxial Configuration of Pr 3 IrO 7 Domains via YSZ (111) Substrate

The 5d rare Earth iridate is an intriguing material with exhibiting exotic electronic and magnetic phases due to spin-orbit coupled states. Ternary iridium oxides Ln 3 IrO 7 contain an unusual Ir 5+ (5d 4 ) system, which remain a subject of active research. Fabricating epitaxial Ln 3 IrO 7 films is challenging due to substrate compatibility, but it offers a valuable platform to explore electronic and magnetic behaviors under reduced dimensionality and substrate interactions, revealing novel phenomena based on Ir 5+ (5d 4 ). In this regard, this demonstrates that Pr 3 IrO 7 with its highly anisotropic orthorhombic structure can be epitaxially grown on a cubic (111)-oriented yttrium-stabilized ZrO 2 (YSZ) substrate. Pr 3 IrO 7 film exhibits six epitaxial domains, where the (220) and (202) planes aligning epitaxially to YSZ (111) with the threefold symmetry. This diverse domain configuration in Pr 3 IrO 7 film leads to unique magnetic properties, exhibiting spin-glass-like behavior. Pr 3 IrO 7 thin film offers a platform for exploring unconventional magnetic states, and their successful heteroepitaxy on YSZ substrates opens new avenues for discovering novel physical phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Compact space and infrared behavior of the effective QCD

Highlights: • Infrared regime of the effective theory in the new quadratic gauge on 4-sphere is investigated. • Abelian dominance is observed in the ghost condensed vacuum of this theory on 4-sphere. • Curvature of 4-sphere does not change the infrared behavior of present theory on 4-sphere from that of the quadratic gauge fixed theory in Euclidean spacetime. • Mass of an off-diagonal gluon on 4-sphere becomes position dependent as a consequence of curvature of 4-sphere. We aim to investigate the infrared regime in the effective theory of the new quadratic gauge in the physical compact space by defining it on 4-sphere. Abelian dominance is characterized by off-diagonal gluons acquiring dynamical masses and it hints at existence of confinement. We do observe Abelian dominance in the ghost condensed vacuum of this theory on 4-sphere. Along with this observation, we find an unusual result that mass of an off-diagonal gluon on 4-sphere is position dependent in this theory as a consequence of the curved geometry. This suggests that the curvature of 4-sphere does not change the infrared behavior of present theory on 4-sphere from that of the theory with the same quadratic gauge in Euclidean spacetime as Abelian dominance is observed in Euclidean spacetime too while it has caused mass of an off-diagonal gluon on 4-sphere to be position dependent. The effective action in the confined phase on 4-sphere and that in the 4-dim Euclidean space are found to be identical in a profound outcome.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Cosmic antihelium-3 nuclei sensitivity of the GAPS experiment

The General Antiparticle Spectrometer (GAPS) is an Antarctic balloon experiment designed for low-energy (0.1-0.3 GeV/n) cosmic antinuclei as signatures of dark matter annihilation or decay. GAPS is optimized to detect low-energy antideuterons, as well as to provide unprecedented sensitivity to low-energy antiprotons and antihelium nuclei. The novel GAPS antiparticle detection technique, based on the formation, decay, and annihilation of exotic atoms, provides greater identification power for these low-energy antinuclei than previous magnetic spectrometer experiments. This work reports the sensitivity of GAPS to detect antihelium-3 nuclei, based on full instrument simulation, event reconstruction, and realistic atmospheric influence simulations. The report of antihelium nuclei candidate events by AMS-02 has generated considerable interest in antihelium nuclei as probes of dark matter and other beyond the Standard Model theories. GAPS is in a unique position to detect or set upper limits on the cosmic antihelium nuclei flux in an energy range that is essentially free of astrophysical background. In three 35-day long-duration balloon flights, GAPS will be sensitive to an antihelium flux on the level of $1.3^{+4.5}_{-1.2} $ ∙ 10 -6 m -2 sr -1 s -1 (GeV/n) -1 (95% confidence level) in the energy range of 0.11-0.3 GeV/n, opening a new window on rare cosmic physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

SIMULATeQCD: A simple multi-GPU lattice code for QCD calculations

The rise of exascale supercomputers has fueled competition among GPU vendors, driving lattice QCD developers to write code that supports multiple APIs. Moreover, new developments in algorithms and physics research require frequent updates to existing software. These challenges have to be balanced against constantly changing personnel. At the same time, there is a wide range of applications for HISQ fermions in QCD studies. This situation encourages the development of software featuring a HISQ action that is flexible, high-performing, open source, easy to use, and easy to adapt. In this technical paper, we explain the design strategy, provide implementation details, list available algorithms and modules, and show key performance indicators for SIMULATeQCD, a simple multi-GPU lattice code for large-scale QCD calculations, mainly developed and used by the HotQCD collaboration. The code is publicly available on GitHub.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Strong interlayer coupling and long-lived interlayer excitons in two-dimensional perovskite derivatives and transition metal dichalcogenides van der Waals heterostructures

Two-dimensional (2D) van der Waals (vdW) heterostructures offer new platforms for exploring novel physics and diverse applications ranging from electronics and photonics to optoelectronics at the nanoscale. The studies to date have largely focused on transition-metal dichalcogenides (TMDCs) based samples prepared by mechanical exfoliation method, therefore it is of signi ficant interests to study high-quality vdW heterostructures using novel materials prepared by a versatile method. Here, we report a two-step vapor phase growth process for the creation of high-quality vdW heterostructures based on perovskites and TMDCs, such as 2D Cs 3 Bi 2 I 9 /MoSe 2 , with a large lattice mismatch. Supported by experimental and theoretical investigations, we discover that the Cs 3 Bi 2 I 9 /MoSe 2 vdW heterostructure possesses hybrid band alignments consisting of type -I and type-II heterojunctions because of the existence of defect energy levels in Cs 3 Bi 2 I 9 . More importantly, we demonstrate that the type-II heterojunction in the Cs 3 Bi 2 I 9 /MoSe 2 vdW heterostructure not only shows a higher interlayer exciton density, but also exhibits a longer interlayer exciton lifetime than traditional 2D TMDCs based type-II heterostructures. We attribute this phenomenon to the reduced overlap of electron and hole wavefunctions caused by the large lattice mismatch. Finally, our work demonstrates that it is possible to directly grow high-quality vdW heterostructures based on entirely different materials which provide promising platforms for exploring novel physics and cutting-edge applications, such as optoelectronics, valleytronics, and high-temperature super fluidity.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Orientation dependence of the effect of short-range ordering on the plastic deformation of a medium entropy alloy

Multi-principal-element alloys (also known as medium and high entropy alloys) offer a much larger and richer design space than conventional alloys, providing opportunities for discovering new functionalities and their governing physics. Some of these alloys exhibit an outstanding combination of high strength and ductility, linked to the activation of various deformation modes triggered by low-energy stacking faults. However, a pressing question remains: Is the plasticity of medium- and high-entropy alloys governed only by stacking fault energy, or does atomic short-range order (SRO) play a role? Here, to answer this, we investigated how SRO affects the deformation in single-crystalline NiCoCr, with previous contradictory findings. First, we established unique experimental evidence for SRO formation in bulk single crystals using high-energy synchrotron transmission X-Ray Diffraction. By tuning the degree of SRO by aging at high temperatures, twinning density and strain-induced martensitic phase transformation can be significantly increased in the [110] and [111] orientations under tension, increasing the tensile ductility; yet, no increase was observed along the [001] orientation due to lack of TWinning-Induced Plasticity (TWIP) or TRansformation-Induced Plasticity (TRIP), indicating a strong crystallographic orientation dependence. Our first-principles thermodynamic calculations unequivocally show SRO exists and governs the observed microstructural evolution and deformation hardening behavior. Here we find direct proof that SRO triggers a simultaneous TWIP and TRIP in NiCoCr, a rare microstructural evolution path. Our findings establish that the interplay of SRO and plasticity could be exploited to alter deformation modes and yield unprecedented mechanical response in medium- and high-entropy alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Large electron-phonon drag asymmetry and reverse heat flow in the topological semimetal θ-TaN

A broad range of unusual transport behaviors have been discovered in topological semimetals. However, to date, the effect on the thermopower from intrinsic momentum exchange between electrons and phonons has received little attention. Here we report that huge electron-phonon drag enhancements of the thermopower of the to- pological semimetal, θ-phase tantalum nitride (θ-TaN), can occur that persist even up to room temperature. Our first principles calculations also identify a surprising asymmetry in which the large drag-enhanced thermopowers found slightly above the material’s chemical potential disappear just below it. The large thermopower en- hancements result from anomalous drag contributions from high frequency acoustic phonons with unusually small decay rates. The apparent vanishing drag results from (i) the emergence of an exceptionally high electrical conductivity promoted by the steep linear electronic dispersions extending below one of the topological nodal points; (ii) a remarkable cancellation in which momentum transferred from a charge current creates oppositely directed phonon heat currents of nearly equal magnitude, thereby masking the drag contributions. This extraordinary transport behavior is a consequence of an unusual interplay between intrinsic electron and phonon material properties in θ-TaN. Overall, our work gives new insights into the fundamental physical properties of coupled electron-phonon systems and motivates further exploration of drag effects in semimetals.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Role of ion acoustic instability in magnetic reconnection

We report on a first-principles numerical study of magnetic reconnection in plasmas with different initial ion-to-electron temperature ratios. In cases where this ratio is significantly below unity, we observe intense wave activity in the diffusion region, driven by the ion-acoustic instability. Our analysis shows that the dominant macroscopic effect of this instability is to drive substantial ion heating. In contrast to earlier studies reporting significant anomalous resistivity, we find that anomalous contributions due to the ion-acoustic instability are minimal. These results shed light on the dynamical impact of this instability on reconnection processes, offering new insights into the fundamental physics governing collisionless reconnection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Effects of Concentration, Salinity and Temperature on the Conformations of Zwitterionic Poly(2-Vinylpyridine- N -Oxide) Chains in Semidilute Solutions Probed by Small-Angle X-Ray and Neutron Scattering

Polyzwitterions, composed of repeating units with equal numbers of anionic and cationic groups, have drawn considerable interest for applications ranging from antimicrobial coatings and antifouling membranes to low-friction interfaces, energy storage media, and actuators. A characteristic feature of many polyzwitterions is the anti-polyelectrolyte effect salt-induced chain expansion in aqueous solution a phenomenon often implicated in their functional behavior. In this study, we investigated the conformational behavior of poly(2-vinylpyridine-N-oxide) (P2VPNO) using smallangle X-ray and neutron scattering (SAXS and SANS). Small-angle X-ray scattering (SAXS) revealed that, in salt-free aqueous solution, P2VPNO adopts an expanded wormlike conformation stabilized by hydration. With increasing concentration, the chains contract due to screening of intrachain excluded-volume interactions, qualitatively consistent with de Gennes’ scaling predictions for neutral polymers. Small-angle neutron scattering (SANS) further demonstrated that P2VPNO exhibits the characteristic anti-polyelectrolyte response to added salt, as observed in many other polyzwitterions. At elevated temperatures, chain flexibility increases, leading to a shorter Kuhn length and reduced radius of gyration. Notably, however, salt-induced chain expansion persists, indicating that the anti-polyelectrolyte effect remains operative under elevated thermal conditions. These findings provide the first experimental evidence of scaling behavior in polyzwitterions, as well as the first observation of their altered antipolyelectrolyte response at elevated temperatures, offering new insights into the solution physics of this important class of polymers.

Conformation↗
DOE OSTI2022

Revisiting the Definition of Rapid Intensification of Tropical Cyclones by Clustering the Initial Intensity and Inner‐Core Size

Abstract Rapid intensification (RI) of tropical cyclones (TCs) provides a great challenge in operational forecasting and contributes significantly to the development of major TCs. RI is commonly defined as an increase in the maximum sustained surface wind speed of at least a certain threshold within 24 hr. The most widely used threshold is 30 kt (15.4 m/s), which was determined statistically. Here we propose a new definition for RI by objectively clustering TCs using the intensification rate, initial intensity, and radius of the maximum wind speed (RMW). A group of 770 samples is separated at a threshold of 45 kt (23.2 m/s). The threshold is 40 kt (20.6 m/s) for the western North Atlantic, where TC size measurements are more reliable. Monte Carlo experiments demonstrate that the proposed threshold is robust even considering the uncertainty in RMW of as high as 30 km. We show that, when a TC undergoes RI, its maximum wind speed is approximately 60 ± 15 kt (30.9 ± 7.7 m/s) and the RMW is 45 ± 20 km. The new threshold outperforms the conventional threshold of 30 kt/24 hr in describing the bimodal distribution of lifetime maximum intensity and explaining the annual count of Category 5 TCs. This new definition provides a more physically based threshold and describes a more reliable representation of extreme events. Although more comparisons are needed for operational application, it is likely to be desirable for case‐based process studies and could provide a more valuable metric for TC intensification classification and research.

Li, Yi↗
DOE OSTI2024

Spatio–Temporal Machine Learning for Regional to Continental Scale Terrestrial Hydrology

Integrated hydrologic models can simulate coupled surface and subsurface processes but are computationally expensive to run at high resolutions over large domains. Here we develop a novel deep learning model to emulate subsurface flows simulated by the integrated ParFlow–CLM model across the contiguous US. We compare convolutional neural networks like ResNet and UNet run autoregressively against our novel architecture called the Forced SpatioTemporal RNN (FSTR). The FSTR model incorporates separate encoding of initial conditions, static parameters, and meteorological forcings, which are fused in a recurrent loop to produce spatiotemporal predictions of groundwater. We evaluate the model architectures on their ability to reproduce 4D pressure heads, water table depths, and surface soil moisture over the contiguous US at 1 km resolution and daily time steps over the course of a full water year. The FSTR model shows superior performance to the baseline models, producing stable simulations that capture both seasonal and event–scale dynamics across a wide array of hydroclimatic regimes. The emulators provide over 1,000× speedup compared to the original physical model, which will enable new capabilities like uncertainty quantification and data assimilation for integrated hydrologic modeling that were not previously possible. Our results demonstrate the promise of using specialized deep learning architectures like FSTR for emulating complex process–based models without sacrificing fidelity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Remotely Sensed High‐Resolution Soil Moisture and Evapotranspiration: Bridging the Gap Between Science and Society

This paper reviews the current state of high‐resolution remotely sensed soil moisture (SM) and evapotranspiration (ET) products and modeling, and the coupling relationship between SM and ET. SM downscaling approaches for satellite passive microwave products leverage advances in artificial intelligence and high‐resolution remote sensing using visible, near‐infrared, thermal‐infrared, and synthetic aperture radar sensors. Remotely sensed ET continues to advance in spatiotemporal resolutions from MODIS to ECOSTRESS to Hydrosat and beyond. These advances enable a new understanding of bio‐geo‐physical controls and coupled feedback mechanisms between SM and ET reflecting the land cover and land use at field scale (3–30 m, daily). Still, the state‐of‐the‐science products have their challenges and limitations, which we detail across data, retrieval algorithms, and applications. We describe the roles of these data in advancing 10 application areas: drought assessment, food security, precision agriculture, soil salinization, wildfire modeling, dust monitoring, flood forecasting, urban water, energy, and ecosystem management, ecohydrology, and biodiversity conservation. We discuss that future scientific advancement should focus on developing open‐access, high‐resolution (3–30 m), sub‐daily SM and ET products, enabling the evaluation of hydrological processes at finer scales and revolutionizing the societal applications in data‐limited regions of the world, especially the Global South for socio‐economic development.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Long‐Term Large‐Scale Atmospheric Forcing Data From Three‐Dimensional Constrained Variational Analysis for the ARM SGP Site

Here, this study presents a long‐term three‐dimensional large‐scale forcing data set (VARANAL3D) derived from the three‐dimensional constrained variational analysis (3DCVA) method at the Atmospheric Radiation Measurement (ARM) program Southern Great Plains (SGP) site from 2004 to 2018. Building on the same input data sets as the conventional continuous forcing data set (VARANAL), VARANAL3D maintains overall consistency in domain‐averaged fields while introducing spatial variability, offering critical insights into the influence of mesoscale synoptic systems on cloud‐related processes. Evaluations are conducted across four cloud and precipitation regimes: Clear‐sky, Shallow‐clouds, Afternoon‐precipitation, and Nocturnal‐precipitation, presenting high consistency of the domain‐mean forcing data sets while emphasizing the role of subdomain forcing variability particularly in precipitating regimes. Single column model (SCM) simulations demonstrate that subdomain VARANAL3D forcing improves cloud and precipitation representation, with the ensemble outperforming domain‐mean forcing in three cloudy and precipitating regimes. Overall, these results highlight VARANAL3D's value for investigating the impacts of spatial variability of large‐scale forcing on atmospheric processes. The VARANAL3D data set provides new opportunities for evaluating model physics, advancing the development of scale‐aware parameterizations and deepening our understanding of cloud and precipitation dynamics.

Environmental sciences↗
DOE OSTI2024

High-entropy engineering of the crystal and electronic structures in a Dirac material

Dirac and Weyl semimetals are a central topic of contemporary condensed matter physics, and the discovery of new compounds with Dirac/Weyl electronic states is crucial to the advancement of topological materials and quantum technologies. Here we show a widely applicable strategy that uses high configuration entropy to engineer relativistic electronic states. We take the A MnSb 2 ( A = Ba, Sr, Ca, Eu, and Yb) Dirac material family as an example and demonstrate that mixing of Ba, Sr, Ca, Eu and Yb at the A site generates the compound (Ba 0.38 Sr 0.14 Ca 0.16 Eu 0.16 Yb 0.16 )MnSb 2 (denoted as A 5 MnSb 2 ), giving access to a polar structure with a space group that is not present in any of the parent compounds. A 5 MnSb 2 is an entropy-stabilized phase that preserves its linear band dispersion despite considerable lattice disorder. Although both A 5 MnSb 2 and A MnSb 2 have quasi-two-dimensional crystal structures, the two-dimensional Dirac states in the pristine A MnSb 2 evolve into a highly anisotropic quasi-three-dimensional Dirac state triggered by local structure distortions in the high-entropy phase, which is revealed by Shubnikov–de Haas oscillations measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Accurate determination of chemical abundances near a supermassive black hole

The metal abundances in galactic nuclei carry key information on the history of star formation and mass transfer in central regions of galaxies. X-ray fluorescence analysis is a unique tool to reliably measure the abundances of various elements via simple physics. Here we present a new observation of the active nucleus in the Circinus galaxy with the XRISM satellite at unprecedented X-ray energy resolution. The fluorescent iron Kα line profile modified by Compton scattering indicates that the material responsible for its emission is cold and metal rich and is located ≳0.024 pc from the supermassive black hole, consistent with the dusty torus region. The abundance pattern derived from comparing fluorescent line intensities of different metals shows subsolar ratios of argon- and calcium-to-iron and a supersolar ratio of nickel-to-iron. This abundance pattern is best produced by a combination in number fraction of 92$^{+2}_{–4}$% core-collapse supernovae from progenitor stars less massive than 20$^{+3}_{–2}$ M ⊙ and 8$^{+4}_{–2}$% type Ia supernovae. This suggests that gas feeding the supermassive black hole was enriched by recent core-collapse supernovae. Our findings imply that in metal-rich environments stars more massive than about 20 M ⊙ directly collapse into black holes or make faint supernovae without ejecting heavy metals into the space.

Astronomy and AstroPhysics↗