Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nanostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Microstructural and micro-mechanical analysis of 14YWT nanostructured Ferritic alloy after varying thermo-mechanical processing paths into tubing

Microstructural analyses and micro-pillar compression were conducted on 14YWT nanostructured ferritic alloy (NFA) to compare different processing pathways: hydrostatic extrusion and Pilger processing with varying annealing temperatures into thin walled tubing, and after hot extrusion and cross-rolling into a plate. Hydrostatic extrusion at 815 °C resulted in the smallest grain sizes and highest yield strength of 1.20 GPa. Pilger processing with annealing at 800 °C had fine grained regions and bands of coarse grains, leading to a large variation in yield strength of 0.9–1.40 GPa. Higher annealing temperatures of 1200 °C after pilger processing significantly increased the grain size and lowered the yield strength to 1.01 GPa. These tubes showed a stronger (111) crystallographic texture in the normal direction and elongated grains in the extrusion direction. Characterization of the nano-oxides using TEM reveals more numerous, smaller oxides present in tubing processed at lower temperatures. Overall, this work shows NFA tubing after hydrostatic extrusion and pilger processing can lead to fine grained microstructures and texturing leading to higher yield strengths at lower annealing temperatures (e.g. 800 °C).

14YWT↗

Synthesis of nanostructured SiC using the pulsed laser deposition technique

We report the new results on the direct synthesis of nanostructured silicon carbide (SiC) materials using the pulsed laser deposition technique. Scanning electron microscopy images revealed that SiC nanoholes, nanosprouts, nanowires, and nanoneedles were obtained. The crystallographic structure, chemical composition, and bond structure of the nanoscale SiC materials were investigated using X-ray diffraction, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and Raman scattering spectroscopy. The transverse optical mode and longitudinal optical mode in Raman spectra were found to become sharper as the substrate temperature was increased, while the material structure evolved from amorphous to crystalline.

36 MATERIALS SCIENCE↗

Balance on the charge generation, separation and transfer performance of different TiO{sub 2} nanostructures in quantum dot sensitized solar cells

Graphical abstract: QDSSCs with different structure: (a) J-V curves, (b) TRPL spectra. - Highlights: • Charge generation, separation and transfer performance have been balanced by different structures. • Excellent charge separation and transfer performance have been exhibited for nano-array structure. • Nanotube array structure relative better charge generation, excellent charge separation and transfer performance of QDSSCs. - Abstract: TiO{sub 2} nanoparticle and nano-array structures including nanorods, nanowires and nanotubes are prepared for the photo-electrodes of CuInS{sub 2} quantum dot sensitized solar cells, which are investigated the balance on charge generation, separation and transfer performance in solar cells. The optical absorption properties and PL spectra of different photo-electrodes are investigated, which indicates better charge generation property for nanoparticle structure and better charge separation property for nano-arrays structure. With the grain boundary of nanoparticle films and excellent charge transfer performance of nano-arrays films, higher short-circuit current density value has been performed for all the nano-array structure based solar cells. Due to the relative large surface area of three nano-arrays structure for charge generation, excellent charge separation and transfer performance, the TiO{sub 2} nanotube based CuInS{sub 2} quantum dot sensitized solar cells exhibits greater photovoltaic efficiency than other nanostructures, which can support the progress for further photovoltaic performance enhancement on quantum dot sensitized solar cells.

36 MATERIALS SCIENCE↗

Hierarchical design and development of nanostructured trifunctional catalysts for electrochemical oxygen and hydrogen reactions

Trifunctional catalysts show a great potential for use in a power-to-gas water-splitting devices for hydrogen gas production, powered by an integrated rechargeable zinc-air battery. None of the currently available commercial electrocatalysts is low cost, and they do not possess excellent catalytic activity and durability at the same time, which is the main barrier to the broad implementation of these technologies. Herein, we design and develop a novel nanostructured trifunctional electrocatalyst that is capable of catalyzing oxygen/hydrogen evolution and oxygen reduction reactions. The combination of non-precious Co, Co 9 S 8 , and S, N co-doped graphitic carbon synergistically provides highly active sites for efficient catalytic reactions, while the unique tubular morphology and hierarchically porous microstructure not only benefit fast access to active sites but also ensure a robust composite structure for durability. As a result, when applied to zinc-air batteries and water splitting, these systems exhibit performance superior to those of commercial precious electrocatalysts (e.g., Pt/C and Ir/C).

08 HYDROGEN↗

Helium entrapment in a nanostructured ferritic alloy

The nanostructured ferritic alloy 14YWT has been irradiated with He ions to simulate accumulation of He during the service life of a nuclear reactor to test the hypothesis that the large surface area for nanoclusters is a preferential nucleation site for bubbles. Transmission electron microscopy and atom probe tomography showed that high number densities of He bubbles were formed on the surface of nanoclusters and Ti(C,N) precipitates, and along grain boundaries and dislocations. At higher fluences, facetted bubbles are formed and it is postulated that the lowest energy state configuration is the truncated rhombic dodecahedron.

36 MATERIALS SCIENCE↗

Stability of a model Fe-14Cr nanostructured ferritic alloy after long-term thermal creep

The successful development of advanced materials such as nanostructured ferritic alloys (NFA) for next generation nuclear reactor concepts and ultra-supercritical steam power plants requires information on long term thermal creep. To support this initiative, we examine the NFA MA957 (Fe-14Cr-1.0Ti-0.3Mo + 0.3Y 2 O 3 in wt%) crept to 61,251 h at 825 °C and 70 MPa, the longest creep test available to date for this material. Using atom probe tomography and electron microscopy, it is demonstrated that the grain size and nanoprecipitate size/composition are unaffected following this 7 yr creep test, although significant porosity is noted throughout the microstructure attributed to microvoid coalescence and growth.

42 ENGINEERING↗

Microstructure and thermal oxidation behavior of yttria-stabilized hafnia nanostructured coatings deposited on alumina

Nanostructured yttria-stabilized hafnia (YSH) coatings were grown on α-Al2O3 substrates with variable coating thickness in a wide range of ~50 nm to 1 μm. Microstructure and thermal oxidation behavior of the grown YSH coatings were studied employing X-ray diffraction (XRD), Rutherford backscattering spectrometry (RBS), scanning electron microscopy (SEM) and isothermal furnace oxidation testing. The effect of coating thickness on the crystal structure, surface/interface morphology and thermal oxidation was investigated. X-ray diffraction analyses revealed the formation of monoclinic phase for relatively thin coatings (b100 nm) indicating that the interfacial phenomena play a dominant role in phase stabilization. The evolution towards stabilized cubic phase with increasing coating thickness is observed. The SEM results indicate the dense, columnar structure of YSH coatings as a function of thickness. Thermal oxidation measurements indicate the enhanced hightemperature oxidation resistance of cubic YSH coatings.

36 MATERIALS SCIENCE↗

Enhancing the reactivity of gold: Nanostructured Au(111) adsorbs CO

Low-coordinated sites are surface defects whose presence can transform a surface of inert or noble metal such as Au into an active catalyst. We prepared gold surfaces modified by pits, starting with a well-ordered Au(111) surface; we then used microscopy (STM) for their structural characterization and CO spectroscopy (IRAS and NEXAFS) for probing reactivity of surface defects. In contrast to the Au(111) surface CO adsorbs readily on the pitted surfaces bonding to low-coordinated sites identified as step atoms forming {111} and {100} microfacets. Finally, pitted nanostructured surfaces can serve as interesting and easily prepared models of catalytic surfaces with defined defects that offer an attractive alternative to vicinal surfaces or nanoparticles commonly employed in catalysis science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Channeling in Aberration-corrected STEM of Nanostructures

Sub- ngstr m resolution imaging and atomic resolution spectroscopy in aberration-corrected STEM are becoming routinely available, providing information on crystal structure, defect structure, elemental composition, and electronic structure with a sensitivity of, or approaching, individual atoms. To quantitatively interpret image intensities, however, requires a better understanding of the origin of the collected signals. We report here observation of anomalous intensity enhancement in sub- ngstr m resolution HAADF images of surfaces and interfaces of ZnO nanostructures. We propose that the significant increase of the collected HAADF signal of a row of atom columns close to the crystal surface originates from a surface-resonance channeling effect [1].

aberration-correction↗

Nanostructure-Initiator Mass Spectrometry Metabolite Analysis and Imaging

Metabolites are downstream end products of gene and protein activity that closely correlate with the phenotype of a biological organism. Therefore, by observing specific metabolic changes, one can gain insight into perturbations underlying disease.(8) Consequently, increasing attention has been dedicated to analyzing metabolites using MS in the context of clinical diagnostics, understanding disease mechanisms, and identifying new therapeutic targets. The ability to analyze metabolites directly from biofluids and tissues continues to challenge current MS technology, largely because of the limits imposed by the complexity of these samples, which contain thousands to tens of thousands of metabolites. A new technology being developed to address this challenge is Nanostructure-Initiator MS (NIMS), a desorption/ionization approach that does not require the application of matrix and thereby facilitates small-molecule (i.e., metabolite) identification.

Imaging↗

Halide Ion Migration in Perovskite Nanocrystals and Nanostructures

The optical and electronic properties of metal halide perovskites provide insight into the operation of solar cells as well as their long-term operational stability. Halide mobility in perovskite films is an important factor influencing solar cell performance. One can visualize halide ion migration through halide exchange between two nanocrystal suspensions or between physically paired films of two different metal halide perovskites. The ability to tune band gap by varying halide ratios (Cl:Br or Br:I) allows the synthesis of mixed halide perovskites with tailored absorption and emission across the entire visible spectrum. Interestingly, mixed halide (e.g., MAPb(Br 0.5 I 0.5 ) 3 ) films undergo phase segregation to form Br-rich and I-rich sites under steady state illumination. Upon halting illumination, segregated phases mix to restore original mixed halide compositions. Introducing multiple cations (Cs, formamidinium) at the A site or alloying with Cl greatly suppresses halide mobilities. Long-term irradiation of MAPb(Br 0.5 I 0.5 ) 3 films also cause expulsion of iodide leaving behind Br-rich phases. Hole trapping at I-rich sites in MAPb(Br 0.5 I 0.5 ) 3 is considered to be an important step in inducing halide mobility in photoirradiated films. Finally, this Account focuses on halide ion migration in nanocrystals and nanostructured films driven by entropy of mixing in dark and phase segregation under light irradiation.

14 SOLAR ENERGY↗

Application of Black Silicon for Nanostructure-Initiator Mass Spectrometry

Nanostructure-initiator mass spectrometry (NIMS) is a matrix-free desorption/ionization technique with high sensitivity for small molecules. Surface preparation has relied on hydrofluoric acid (HF) electrochemical etching which is undesirable given the significant safety controls required in this specialized process. Here in this study, we examine a conventional and widely used process for producing black silicon based on sulfur hexafluoride/oxygen (SF 6 /O 2 ) inductively coupled plasma (ICP) etching at cryogenic temperatures and we find it to be suitable for NIMS. A systematic study varying parameters in the plasma etching process was performed to understand the relationship of black silicon morphology and its sensitivity as a NIMS substrate. The results suggest that a combination of higher silicon temperature and oxygen flow rate gives rise to the formation of black silicon with fine pillar structures, whose aspect ratio are ~8.7 and depth are <1 μm resulting in higher NIMS sensitivity which is attributed to surface restructuring caused by their low melting point upon laser irradiation. Interestingly, we find selectivity of these black silicon substrates to different analytes depending on the etching parameters. Though, the sensitivity of the dry etching process is lower than the traditional "wet" electrochemical etching process, it is suitable for many applications and is prepared using conventional equipment without the use of HF.

36 MATERIALS SCIENCE↗

Hierarchically Self-Assembled Block Copolymer Blends for Templating Hollow Phase-Change Nanostructures with an Extremely Low Switching Current

Phase change memory (PCM) is one of the most promising candidates for next-generation nonvolatile memory devices because of its high speed, excellent reliability, and outstanding scalability. But, the high switching current of PCM devices has been a critical hurdle to realize low-power operation. Although one solution is to reduce the switching volume of the memory, the resolution limit of photolithography hinders further miniaturization of device dimensions. Here, we employed unconventional self-assembly geometries obtained from blends of block copolymers (BCPs) to form ring-shaped hollow PCM nanostructures with an ultrasmall contact area between a phase-change material (Ge 2 Sb 2 Te 5 ) and a heater (TiN) electrode. The high-density (approximately 0.1 terabits per square inch) PCM nanoring arrays showed extremely small switching current of 2-3 mu A. Furthermore, the relatively small reset current of the ring-shaped PCM compared to the pillar-shaped devices is attributed to smaller switching volume, which is well supported by electro-thermal simulation results. Our approach may also be extended to other nonvolatile memory device applications such as resistive switching memory and magnetic storage devices, where the control of nanoscale geometry can significantly affect device performances.

36 MATERIALS SCIENCE↗

Building Materials from Colloidal Nanocrystal Assemblies: Molecular Control of Solid/Solid Interfaces in Nanostructured Tetragonal ZrO 2

We describe in this paper a bottom-up approach to control the composition of solid/solid interfaces in nanostructured materials, and we test its effectiveness on tetragonal ZrO 2 , an inorganic phase of great technological significance. Colloidal nanocrystals capped with trioctylphosphine oxide (TOPO) or oleic acid (OA) are deposited, and the organic fraction of the ligands is selectively etched with O 2 plasma. The interfaces in the resulting all-inorganic colloidal nanocrystal assemblies are either nearly bare (for OA-capped nanocrystals) or terminated with phosphate groups (for TOPO-capped nanocrystals) resulting from the reaction of phosphine oxide groups with plasma species. The chemical modification of the interfaces has extensive effects on the thermodynamics and kinetics of the material. Different growth kinetics indicate different rate limiting processes of growth (surface diffusion for the phosphate-terminated surfaces and dissolution for the “bare” surfaces). Phosphate termination led to a higher activation energy of growth, and a 3-fold reduction in interfacial energy, and facilitated significantly the conversion of the tetragonal phase into the monoclinic phase. Finally, films devoid of residual ligands persisted in the tetragonal phase at temperatures as high as 900 °C for 24 h.

36 MATERIALS SCIENCE↗

Effect of Acid-Washing on the Nature of Bulk Characteristics of Nitrogen-Doped Carbon Nanostructures as Oxygen Reduction Reaction Electrocatalysts in Acidic Media

In this work, CN x catalysts were synthesized using Fe-doped MgO as a growth substrate. The oxygen reduction reaction (ORR) performance of the synthesized samples was evaluated in a half-cell. Acid-washing improved the ORR activity for the synthesized CN x samples. This is attributed to the removal of the exposed metal, which is likely to be blocking the active sites. Characterization experiments suggest that acid-washing totally eliminates the support material (MgO) and renders carbon more graphitic. This is likely to be due to elimination of amorphous or less crystalline species during washing. In addition, characterization experiments reveal significant differences in the metallic species that are exposed versus those encased in the carbon nanostructure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stochastic Real-Time Second-Order Green’s Function Theory for Neutral Excitations in Molecules and Nanostructures

We present a real-time second-order Green’s function (GF) method for computing excited states in molecules and nanostructures, with a computational scaling of O(N e 3 ), where N e is the number of electrons. The cubic scaling is achieved by adopting the stochastic resolution of the identity to decouple the 4-index electron repulsion integrals. To improve the time propagation and the spectral resolution, we adopt the dynamic mode decomposition technique and assess the accuracy and efficiency of the combined approach for a chain of hydrogen dimer molecules of different lengths. We find that the stochastic implementation accurately reproduces the deterministic results for the electronic dynamics and excitation energies. Furthermore, we provide a detailed analysis of the statistical errors, bias, and long-time extrapolation. Overall, the approach offers an efficient route to investigate excited states in extended systems with open or closed boundary conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanostructuring and Underscreening of Bisalt Electrolytes with Dual-Anion Effects: Insights from Small-Angle Scattering Prepeak Analysis

Using small-angle neutron scattering, we studied the nanostructure of a prototypical D(H)-bonded network electrolyte, alkaline sodium aluminate bisalt, at concentrations up to solute volume fraction of ~0.5. Analysis of the structure factor prepeak at 0.1 < Q < 1.0 Å-1 showed that its evolution is associated with nanoscopic species distribution in water-anion network., with differences in characteristic distance d between OD- and Al(OD)4- anions related to their distinct sizes and interactions. When the solute volume fraction approached 0.5, a common/maximum value of ~4.5 Å was found for the correlation length ? that characterizes the electrostatic force in concentrated electrolyte solution before precipitation occurred. This implies that the solutions’ morphology and behavior at high concentrations may be governed by geometric factors, rather than the chemistry of the specific anion. Furthermore, the scaling of ? with concentration yielded an exponent of 1.25(1), suggesting that ? is limited to a few Å. By combining the current observations of structural heterogeneity at the nanoscale, with dynamic heterogeneity at the microscopic scale from our previous quasi-elastic neutron scattering study, we have established a structural origin of local “caging” and restricted structural relaxation processes. These local solvent-solute interactions not only control dynamics heterogeneity in concentrated electrolytes but also are responsible for crystallization processes in industrial setting, such as aluminum production and radioactive waste treatment.

Wang, Hsiu-Wen↗

Intervening Oxygen Enabled Magnetic Moment Modulation in Spinel Nanostructures

Oxygen vacancies and lattice oxygen on the surface of nanoparticles play crucial roles in the magnetism of transition metal oxides. A fundamental understanding of the interactions between the 2p orbitals of oxygen anions and the 3d orbitals of metal cations is of immense interest for applications due to specific electronic, magnetic, and chemical properties. The spinel nanostructures Co 3 O 4 ,Fe 3 O 4 , and CoFe 2 O 4 present a unique model to alter coordination and bonding due to d electrons and oxygen 2p states. We performed complementary experimental techniques and corresponding model calculations to show that the overall net magnetism differs significantly between the O 2 -rich and -deficient environments. It was found that in monometallic spinel oxides (e.g., Co 3 O 4 and Fe 3 O 4 ), the changes in the spin moment are relatively small (~0.08μ B per formula unit) compared to those in the bimetallic spinel oxide CoFe 2 O 4 (~0.40 μ B per formula unit). Finally, our study illustrates that the O 2 -rich/deficient conditions alter the exchange of O h sites and adjust the metal ion moments so as to impact the overall magnetism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗