SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The rationale and objectives for landing an Apollo mission near a Surveyor spacecraft on the moon are discussed. Surveyor 3 and the planning of the Apollo 12 flight are considered. Mission operations and returned material, including material handling, are reviewed. The analysis of the returned parts, soil, and photographs is considered.
Teleoperator components include manipulators and end effectors, sensors, a mobility unit, radio or hard-wire communications receiver and information processor, information display, man in the control loop at various levels of sophistication, the controls, and the transmitter. Possible applications of teleoperators in space cover a wide spectrum from various research and operational missions in earth orbit in conjunction with the space shuttle, space stations, and satellites to vehicles to explore the moon, planets and their moons, asteroids and comets.
Research and Applications Modules (RAMs) are shuttle-compatible payload carriers providing economical experiment/payload accommodations for earth orbital space research and application objectives. The RAM Thermal Control System (TCS) incorporates a pumped fluid coolant loop to provide the flexibility for the wide range of cooling loads and mission operations. The concept employs two fluids: water inside the habitable region to absorb heat, Freon 21 outside to reject heat through radiators. The external surfaces of RAM vehicles are effectively insulated. Therefore, virtually all internally generated heat is rejected through the radiators. The selected system is described along with key analysis techniques developed during the study.
Description of a procedure to develop a methodology to optimize man-serviced systems for reliability and maintainability. The spacecraft systems are analyzed using failure modes and effects analysis and maintenance analysis, component mean-time-between failure, duty cycle, type of redundancy, and cost information to develop parametric data on various time intervals. Included are crew time-to-repair, cost, weight, and volume effects of increasing subsystem reliability above the baseline. Results are presented for space systems using the existing data from a research and applications module. These results show the minimum cost of sustaining mission operations.
The functions which must be performed to ensure the effective and efficient use of a space astronomical observatory may be separated into three major categories, including mission planning and analysis, mission operations, and data utilization. Each of these functions can be further subdivided. The most suitable locations for conducting the data processing operations in each case must be determined on the basis of criteria which take into account economical and operational factors. An advanced operational concept for an astronomical observatory is discussed.
This document describes the content and organization of the Mariner 9 Mission Test Computer/Mission Test Video System microfiche library. This 775 card library is intended to supply the user with a complete record of the images received from Mars orbit during the Mariner 9 mission operations, from 15 Nov. 1971 to 1 Nov. 1972.
The involvement of the Marshall Space Flight Center's Space Sciences Laboratory in the Skylab program from the early feasibility studies through the analysis and publication of flight scientific and technical results is described. This includes mission operations support, the Apollo telescope mount, materials science/manufacturing in space, optical contamination, environmental and thermal criteria, and several corollary measurements and experiments.
Discussion of the propellant management system requirements derived for the Viking 75 mission, and review of a series of surface tension propellant management system design concepts. The chosen concept is identified and its mission operation described. The ullage bubble and bulk liquid positioning characteristics are presented, along with propellant dynamic considerations entailed by thrust initiation/termination. Pressurization design considerations, required to assure minimum disturbance to the bulk propellant, are introduced as well as those of the tank ullage vent. Design provisions to assure liquid communication between tank ends are discussed. Results of a preliminary design study are presented, including mechanical testing requirements to assure structural integrity, propellant compatibility, and proper installation.
The primary mission of Mariner 9 was to map the Martian surface. This paper discusses in detail the design of the mapping science sequences which were executed by the spacecraft in sixty days and during which over eighty percent of the surface was photographed. The sequence design was influenced by many factors: experimenter scientific objectives, instrument capabilities, spacecraft capabilities, orbit characteristics, and data return rates, which are illustrated graphically. Typical orbits are depicted for each of the three different mapping phases lasting twenty days. Examples of typical orbital sequence plans prepared daily during mission operations are given.
Summary of Mariner 9 mission operations associated with the acquisition of geological data. Selected results are presented, along with hypotheses inferred from preliminary evidence. These hypotheses are included in order to call attention to areas in which potentially valuable work can be performed.
Evaluation of low altitude oblique photography obtained by hand-held cameras was useful in determining specifications of operational mission requirements for conventional smaller-scaled vertical photography. Remote sensing techniques were used to assess the rapid destruction of marsh areas at Pointe Mouillee. In an estuarian environment where shoreline features change yearly, there is a need for revision in existing area maps. A land cover inventory, mapped from aerial photography, provided essential data necessary for determining adjacent lands suitable for marshland development. To quantitatively assess the wetlands environment, a detailed inventory of vegetative communities (19 categories) was made using color infrared photography and intensive ground truth. A carefully selected and well laid-out transect was found to be a key asset to photointerpretation and to the analysis of vegetative conditions. Transect data provided the interpreter with locally representative areas of various vegetative types. This facilitated development of a photointerpretation key. Additional information on vegetative conditions in the area was also obtained by evaluating the transect data.
The results of a study to define a roving vehicle suitable for inclusion in a 1979 Viking mission to Mars are presented. The study focused exclusively on the 1979 mission incorporating a rover that would be stowed on and deployed from a modified Viking lander. The overall objective of the study was to define a baseline rover, the lander/rover interfaces, a mission operations concept, and a rover development program compatible with the 1979 launch opportunity. During the study, numerous options at the rover system and subsystem levels were examined and a baseline configuration was selected. Launch vehicle, orbiter, and lander performance capabilities were examined to ensure that the baseline rover could be transported to Mars using minimum-modified Viking '75 hardware and designs.
System design and performance of the Skylab Airlock Module and Payload Shroud are presented for the communication and caution and warning systems. Crew station and storage, crew trainers, experiments, ground support equipment, and system support activities are also reviewed. Other areas documented include the reliability and safety programs, test philosophy, engineering project management, and mission operations support.
The various programs involved in the development of the Skylab Orbital Workshop are discussed. The subjects considered include the following: (1) reliability program, (2) system safety program, (3) testing program, (4) engineering program management, (5) mission operations support, and (6) aerospace applications.
Results are presented from a test program which was conducted to assess the capability of various solenoid-actuated valve design concepts to provide performance characteristics commensurate with long-duration (ten-year) missions to explore the outer planets. The valves were installed in a hydrazine flow test setup and periodically cycled during a nine-month test period under test conditions comparable to anticipated mission operating conditions. In situ valve performance was periodically determined, and leakage was continuously monitored.
The probe bus and orbiter subsystems are defined, and tradeoffs analyzed. Subsystems discussed include: communications, electric power, data handling, attitude determination and control, propulsion, thermal control, structure and mechanisms, NASA/ESRO orbiter interface, mission operation, and flight support.
The use of simulation modeling for the identification of system sensitivities to internal and external forces and variables is discussed. The technique provides a means of exploring alternate system procedures and processes, so that these alternatives may be considered on a mutually comparative basis permitting the selection of a mode or modes of operation which have potential advantages to the system user and the operator. These advantages are measurements is system efficiency are: (1) the ability to meet specific schedules for operations, mission or mission readiness requirements or performance standards and (2) to accomplish the objectives within cost effective limits.
The heart of the spacecraft downlink is the flight data subsystem (FDS). The FDS combines the functions of science and engineering measurement control. The FDS can generate six principal telemetry formats, each of which may be transmitted directly to earth. Spacecraft engineering subsystems are considered, giving attention to the power subsystem, the attitude control subsystem, the propulsion subsystem, devices for temperature control, and the tracking subsystem. The mission operations system is also discussed together with the flight plan.