Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Microstructural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Effect of vanadium on phase composition and hard magnetic properties of as-solidified and heat-treated Sm–Fe–(Ti,V) alloys

Although the intrinsic magnetic properties of Ti-stabilized Sm(Fe,Co,Ti) 12 compounds exhibit potential of excellent rare-earth-lean permanent magnets, it has been much easier to realize large coercivities with the isostructural compounds stabilized by either V or by certain combinations of Ti and V. To elucidate the influence of V on the microstructure and magnetic properties, a series of Sm 8.1 Fe 78.4 (Ti 1-x V x ) 13.5 alloys was studied after arc-melting and annealing at 850–1000 °C. The alloys were found to fall into three groups. For x ≤ 0.2, solidification generates mostly the Sm(Fe,Ti,V) 12 phase, but annealing converts at least part of it into the non-magnetic Sm(Fe,Ti,V) 11 and the magnetically soft Sm 2 (Fe,Ti,V) 17 phases. For 0.2 < x < 0.6, the alloys solidify into a near-equilibrium mixture of the Sm(Fe,Ti,V) 12 , TiFe 2 and Sm-rich phases. For x ≥ 0.6, solidification generates large fractions of α-Fe solid solution and Sm-rich phases; an annealing step is necessary to complete the formation of Sm(Fe,Ti,V) 12 phase. Also, for x ≥ 0.6 the temperature below which the Sm(Fe,Ti,V) 12 phase is stable decreases with x, as does the fraction of this phase formed during solidification. Here, the differences between these three groups of alloys suggest different strategies for developing hard magnetic properties, with the likelihood of a success increasing with increasing x. For x ≥ 0.6, heat treatment alone is demonstrated to generate a microstructure of micron and submicron Sm(Fe,Ti 1-x V x ) 12 crystallites separated by a Sm-rich phase and exhibiting a coercivity with values up to 3.5 and 5.7 kOe for x = 0.8 and 1.0, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Linking sintering stresses to nano modification in the microstructure of BaLa4Ti4O15 by transmission electron microscopy

Highlights: • by systematic HRTEM studies we link the microstructural changes in BLT ceramics to the external pressure applied during sintering; • we developed a mechanistic understanding of the role of stress in sintering; • external stresses during sintering affect the microstructural development at the nanoscale level, being responsible for the creation of higher defective bulk and grain boundary regions; • observation of high density of stacking faults (which generally arrises due to the Ti vacancy layers) indicates that the applied stress is modifying the stacking of AO{sub 3} layers of BLT which in turn creates Ti vacancy layer and stacking faults; • stress assisted sintering has, therefore, the potential to be used as a tool to design microstructures and achieve tailored properties, as suggested from our previous results in BLT and BNT. - Abstract: High quality factor and a temperature stable resonant frequency make BaLa{sub 4}Ti{sub 4}O{sub 15} (BLT) ceramics attractive materials for microwave applications. Aiming to exploit the effects of external stresses on the development of textured and anisotropic microstructures to optimise MW properties, the influence of applied external pressure during sintering of BLT ceramics is analysed. HRTEM and geometric phase analysis (GPA) showed that stresses applied during sintering, trigger the nucleation and growth of faults hypothesised to be due to the errors in the AO{sub 3} layer (basal plane) stacking sequence of the hexagonal perovskite structure. The results reveal a strong correlation between the high concentration of structural defects and the development of anisotropic microstructures, which tune the properties of BLT. Stresses applied during sintering are therefore a promising tool to design material properties.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Phase Evolution and Mechanical Properties of AlCoCrFeNiSi{sub x} High-Entropy Alloys Synthesized by Mechanical Alloying and Spark Plasma Sintering

In the current investigation, AlCoCrFeNiSi{sub x} (x = 0, 0.3, 0.6 and 0.9 in atomic ratio) high-entropy alloy systems are prepared by mechanical alloying and subsequently consolidated by spark plasma sintering. The microstructural and mechanical properties were analyzed to understand the effect of Si addition in AlCoCrFeNi alloy. The x-ray diffraction analysis reveals the supersaturated solid solution of the body-centered cubic structure after 20 h of ball milling. However, the consolidation promotes the transformation of body-centered phases partially into the face-centered cubic structure and sigma phases. A recently proposed geometric model based on the atomic stress theory has been extended for the first time to classify single phase and multi-phases on the high-entropy alloys prepared by mechanical alloying and spark plasma sintering process. Improved microhardness and better wear resistance were achieved as the Si content increased from 0 to 0.9 in the present high-entropy alloy.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Uranium nitride (UN) pellets with controllable microstructure and phase – fabrication by spark plasma sintering and their thermal-mechanical and oxidation properties

Dense uranium mononitride (UN) pellets with controlled microstructures and tailored grain size from large-grained to a few microns are synthesized by spark plasma sintering (SPS) combined with high energy ball milling. The impacts of the sintering conditions on fuel microstructure, grain size, physical density, and phase behavior are systematically investigated, and the thermal-mechanical properties and oxidation behavior of the SPS densified UN pellets are characterized. Higher sintering temperatures and longer ball milling durations and thus finer starting UN powders promote sintering and densification, and dense UN pellets above 95% theoretical density can be achieved by SPS at 1873 K for 10 min. UN phase purity is maintained in the SPS-densified pellets sintered at a lower temperature and short duration. A phase heterogeneity with secondary UO 2 or uranium sesquinitride (U 2 N 3 ) occurs for the UN pellets sintered at higher temperatures using finer UN powders. The hardness and fracture toughness of the SPS-densified UN pellets increase with smaller grain sizes and higher densities to 7.9 GPa and 3.5 MPa m 1/2 , respectively. Furthermore, both small (1–2 μm) and large grain-sized (30–50 µm) UN pellets exhibit good thermal conductivity. Dynamic oxidation testing by a thermogravimetric analyzer in air shows that the onset temperature for oxidation varies with microstructure and phase heterogeneity of the SPS densified UN pellets. Particularly, the smaller-grained (micron-sized) UN pellets containing uranium oxides and U 2 N 3 display lower weight gain and significantly-reduced oxidation kinetics, and full oxidation completes at a temperature above 1173 K when tested with a ramp rate of 10 K/min.

36 MATERIALS SCIENCE↗
NASA NTRS1989

Advanced single crystal for SSME turbopumps

The objective of this program was to evaluate the influence of high thermal gradient casting, hot isostatic pressing (HIP) and alternate heat treatments on the microstructure and mechanical properties of a single crystal nickel base superalloy. The alloy chosen for the study was PWA 1480, a well characterized, commercial alloy which had previously been chosen as a candidate for the Space Shuttle Main Engine high pressure turbopump turbine blades. Microstructural characterization evaluated the influence of casting thermal gradient on dendrite arm spacing, casting porosity distribution and alloy homogeneity. Hot isostatic pressing was evaluated as a means of eliminating porosity as a preferred fatigue crack initiation site. The alternate heat treatment was chosen to improve hydrogen environment embrittlement resistance and for potential fatigue life improvement. Mechanical property evaluation was aimed primarily at determining improvements in low cycle and high cycle fatigue life due to the advanced processing methods. Statistically significant numbers of tests were conducted to quantitatively demonstrate life differences. High thermal gradient casting improves as-cast homogeneity, which facilitates solution heat treatment of PWA 1480 and provides a decrease in internal pore size, leading to increases in low cycle and high cycle fatigue lives.

Fritzemeier, L. G.↗
DOE OSTI2018

Preparation and characterization of the Al-Cu-Mg-Si-Mn composites reinforced by different surface modified SiCp

Highlights: • The Ti-coated SiC{sub p} exhibited more uniformly distribution in composites than that of pre-oxidized SiC{sub p}. • Ti-coated SiC{sub p} obtained better SiC{sub p}-Al interface bonding than that of pre-oxidized SiC{sub p}. • The composites reinforced by Ti-coated SiC{sub p} exhibited better tensile properties than that reinforced by pre-oxidized SiC{sub p}. - Abstract: In this paper, the 4 vol% SiC{sub p}/Al-Cu-Mg-Si-Mn composites were prepared by method of stirring casting. The effects of SiC{sub p} surface modifications (oxidization and Ti-coating) and particle sizes (5 μm, 10 μm and 15 μm) on the microstructure and tensile properties of the composites were analyzed. The effects of SiC{sub p} sizes on the distribution of SiC{sub p} in the pre-oxidized SiC{sub p}/Al-Cu-Mg-Si-Mn composites were larger than those in Ti-coated SiC{sub p}/Al-Cu-Mg-Si-Mn composites. The Al-Cu-Mg-Si-Mn composites reinforced with Ti-coated SiC{sub p} exhibited more uniform SiC{sub p} distributions and higher tensile mechanical properties than those reinforced with the pre-oxidized SiC{sub p}. When the SiC{sub p} size was 15 μm, the Ti-coated SiC{sub p}/Al-Cu-Mg-Si-Mn composite showed the best yield strength (σ{sub 0.2}), ultimate tensile strength (σ{sub UTS}) and fracture strain (ε{sub f}) of 410 MPa, 548 MPa and 7.6% with the increase of 10.2%, 2.6% and 5.6% than that of reinforced by pre-oxidized SiC{sub p}. The more uniformly dispersed particles and better tensile properties of the Ti-coated SiC{sub p}/Al-Cu-Mg-Si-Mn composites could be attributed to the better wetting between Ti-coated SiC{sub p} and molten Al.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Oxygen-Induced Mechanical Property Variations of Rapidly Solidified Ti-Based Bulk Metallic Composites

In titanium-based metallic glass composites, a new kind of structural material, the presence of oxygen is an unavoidable problem. Since the amorphous matrix is very sensitive to oxygen, oxygen content must be carefully controlled during the manufacturing process. In this paper, the effects of oxygen on the microstructure and mechanical properties of Ti{sub 48}Zr{sub 20}Nb{sub 12}Cu{sub 5}Be{sub 15} metallic glass composite was studied. The results showed that even low concentrations of oxygen in the metallic glass composite are sufficient to significantly affect the strength, plasticity and working hardening ability without altering the microstructure of the composite on micron scale. Acceptable oxygen content ranges in Ti{sub 48}Zr{sub 20}Nb{sub 12}Cu{sub 5}Be{sub 15} metallic glass composites for practical applications can be determined by balancing the stability of the amorphous matrix and the strength and plasticity of the alloy.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Study on effects of powder and flake chemistry and morphology on the properties of Al-Cu-Mg-X-X-X powder metallurgy advanced aluminum alloys

The effects of alloy chemistry and particulate morphology on consolidation behavior and consolidated product properties in rapid solidification processed, powder-metallurgical Al-3Li-1.5Cu-1Mg-0.5Co-0.2Zr and Al-4.4Cu-1.5Mg-Fe-Ni-0.2Zr extrusions and forgings were studied. Microstructures and mechanical properties of both alloys are largely unaffected by particulate production method (vacuum atomization, ultrasonic atomization, or twin-roller quenching) and by particulate solidification rates between 1000 and 100,000 K/s. Consolidation processing by canning, cold compaction, degassing, and hot extrusion is sufficient to yield mechanical properties in the non-Li-containing alloy extrusions which are similar to those of 7075-Al, but ductilities and fracture toughnesses are inferior owing to poor interparticle bonding caused by lack of a vacuum-hot-pressing step during consolidation. Mechanical properties of extrusions are superior to those of forgings owing to the stronger textures produced by the more severe hot working during extrusion. The effects on mechanical properties of dispersoid size and volume fraction, substructural refinement, solid solution strengthening by Mg, and precipitate size and distribution are elucidated for both alloy types.

Meschter, P. J.↗
DOE OSTI2018

Influence of the substrate temperature on the microstructure and electron-induced secondary electron emission properties of MgO/Au composite film

Highlights: • MgO/Au film was prepared by magnetron sputtering of individual Mg and Au targets. • A higher substrate temperature (T{sub s}) is conducive to the growth of MgO grains. • The surface roughness firstly rises and then decreases with T{sub s} increasing. • The increase of T{sub s} greatly enhances the SEE coefficient of the composite film. - Abstract: The influence of the substrate temperature (T{sub s}) on the microstructure and electron-induced secondary electron emission (SEE) properties of MgO/Au composite film prepared by reactive magnetron sputtering was investigated in order to improve the SEE performance of this composite film. During the deposition of MgO/Au film, a relatively high T{sub s} is conducive to the growth of MgO grains and causes the formation of some large aggregated gold particles on which MgO grains cover in the composite film. In terms of the SEE properties of MgO/Au film, the increase of T{sub s} brings about a significant improvement of SEE coefficient (δ), while it also leads to a slightly accelerated SEE degradation under the continuous electron bombardment due to a faster surface charging. The MgO/Au film prepared at T{sub s} of 773 K has a δ value of 4.9 at a primary electron energy of 200 eV and the maximum δ value of 11.5.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

The Application of Centrifugal Atomization Method for Preparation of Rapidly Solidified Nd-Fe-B Flakes Used for Production of Permanent Magnets

Nd-Fe-B-type permanent magnets are used in applications that require a high-energy product/volume ratio in order to reduce weight. Automotive industry, hard drives, or wind turbines are just examples of an application where their use can be found. Conventional casting techniques reveal the formation of a high quantity of α-Fe and large Nd-rich regions. On the other hand, new techniques, like strip casting, melt-spinning and centrifugal atomization, produce homogeneous and fine-scaled microstructures. This paper discusses the application of rapid solidification by means of the centrifugal atomization method for preparation of Nd-Fe-B flakes. The effect of alloy composition and various process parameters of centrifugal atomization on the microstructure of rapidly solidified Nd-Fe-B alloy were investigated. The microstructures and the phase composition were examined by metallographic techniques, namely optical and scanning electron microscopy. Additionally, the influence of the processing parameters on the microstructures of as-cast flakes and subsequent magnetic properties of the prepared magnets will be discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Characterization of Tri-lab β-Tin (Sn)

This report documents details of the microstructure and mechanical properties of -tin (Sn), that is used in the Tri-lab (Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), Sandia National Laboratories (SNL)) collaboration project on Multi-phase Tin Strength. We report microstructural features detailing the crystallographic texture and grain morphology of as-received -tin from electron back scatter diffraction (EBSD). Temperature and strain rate dependent mechanical behavior was investigated by multiple compression tests at temperatures of 200K to 400K and strain rates of 0.0001 /s to 100 /s. Tri-lab tin showed significant temperature and strain rate dependent strength with no significant plastic anisotropy. A sample to sample material variation was observed from duplicate compression tests and texture measurements. Compression data was used to calibrate model parameters for temperature and rate dependent strength models, Johnson-Cook (JC), Zerilli-Armstrong (ZA) and Preston-Tonks-Wallace (PTW) strength models.

36 MATERIALS SCIENCE↗
NASA NTRS2001

Environment Conscious Ceramics (Ecoceramics): An Eco-Friendly Route to Advanced Ceramic Materials

Environment conscious ceramics (Ecoceramics) are a new class of materials, which can be produced with renewable natural resources (wood) or wood wastes (wood sawdust). This technology provides an eco-friendly route to advanced ceramic materials. Ecoceramics have tailorable properties and behave like ceramic materials manufactured by conventional approaches. Silicon carbide-based ecoceramics have been fabricated by reactive infiltration of carbonaceous preforms by molten silicon or silicon-refractory metal alloys. The fabrication approach, microstructure, and mechanical properties of SiC-based ecoceramics are presented.

Singh, M.↗
DOE OSTI2017

3D Microstructures for Materials and Damage Models

Many challenges exist with regard to understanding and representing complex physical processes involved with ductile damage and failure in polycrystalline metallic materials. Currently, the ability to accurately predict the macroscale ductile damage and failure response of metallic materials is lacking. Research at Los Alamos National Laboratory (LANL) is aimed at building a coupled experimental and computational methodology that supports the development of predictive damage capabilities by: capturing real distributions of microstructural features from real material and implementing them as digitally generated microstructures in damage model development; and, distilling structure-property information to link microstructural details to damage evolution under a multitude of loading states.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Influence of Exposure to Multiple Brazing Cycles on the Integrity of OFE Copper Brazed Joints

A 10 MeV, 5 kW S-band travelling wave electron linear accelerator has been developed at Raja Ramanna Centre for Advanced Technology for industrial applications. The electron accelerating structure is made of oxygen-free electronic (OFE) copper and comprises of fifty-six brazed joints and is fabricated in multiple stages, as per the process and testing requirements. The accelerating structure is often required to be repaired through an additional brazing cycle with the same filler. The present study evaluates possible microstructural and mechanical property degradation of OFE copper brazed joints, as a result of its exposure to multiple brazing cycles. The study was performed on an OFE copper cavity stack brazed assembly, made through a four-stage brazing using BVAg-8 as braze filler. The resultant brazed assembly did not exhibit any leak at a sensitivity of 1 × 10{sup −10} mbar.L/s. The results of the study demonstrate that OFE copper brazements can be safely subjected to an additional brazing cycle without causing significant degradation in its microstructure and strength. However, brazed joint’s exposure to any additional brazing cycles results in the formation of voids and cracks due to intergranular penetration of silver, with associated drop in tensile strength from about 210 MPa to about 150-180 MPa. Based on the results of study, it is recommended to qualify the accelerating structure, fabricated through multiple brazing cycles, by a suitable non-destructive technique. The results of the study are important for design, fabrication and maintenance of electron linear accelerator components.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of tension during sulfonation stabilization for UHMWPE-derived carbon fibers

Polyethylene is a promising low-cost alternative precursor material for carbon fiber production, but it has yet to show mechanical properties near or surpassing polyacrylonitrile-derived carbon fibers. The high molecular weight and order of ultra-high molecular weight polyethylene (UHMWPE) may offer a pathway to realizing this promise by enabling long-range graphitic structure formation and superior mechanical properties. The tension applied during the precursor stabilization process is crucial to maintaining the shape of the fibers during the conversion process, but no published study has yet probed the relationship between sulfonation tension and carbon fiber microstructure and mechanical properties. In this work, a logarithmic sweep of tensile stress was applied to UHMWPE fibers during the stabilization process followed by carbonization. Increasing tension significantly reduced fiber shrinkage, resulted in straighter fibers with less severe kink bands, and greatly improved the mechanical properties of the fibers. Raman spectroscopy and X-ray diffraction revealed that in all cases the carbon fibers were largely amorphous, but increasing tension resulted in increased size and alignment of the turbostratic crystallites with the fiber axis. Large voids were present in the sample fibers, so the Griffith-Irwin relation was employed to predict the potential ultimate tensile strength of the fibers with voids reduced to sizes comparable to commercially produced fibers. Furthermore, this work demonstrates the importance of tension applied during the stabilization of polyethylene fibers for carbon fiber production and establishes a framework for achieving high mechanical properties from these precursors.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Ultrafast Relativistic Electron Nanoprobes

Abstract One of the frontiers in electron scattering is to couple ultrafast temporal resolution with highly localized probes to investigate the role of microstructure on material properties. Here, taking advantage of the high average brightness of our electron source, we demonstrate the generation of ultrafast relativistic electron beams with picometer-scale emittance and their ability to probe nanoscale features on materials with complex microstructures. The electron beam is tightly focused at the sample plane by a custom in-vacuum lens system, and its evolution around the waist is accurately reconstructed. We then use the focused beam to characterize a Ti-6 wt% Al polycrystalline sample by correlating the diffraction and imaging modality, showcasing the capability to locate grain boundaries and map adjacent crystallographic domains with sub-micron precision. This work provides a paradigm for ultrafast electron instrumentation, enabling characterization techniques such as relativistic ultrafast electron nano-diffraction and ultrafast scanning transmission electron microscopy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Laser Brazing Characteristics of Al to Brass with Zn-Based Filler

Laser brazing of Al to brass in lap configuration with Zn-based filler was performed in this work. The process parameters including laser power, defocused distance were found to have a significant influence on appearance, microstructure and mechanical properties. The process parameters were optimized to be laser power of 2700 W and defocusing distance of + 40 mm from brass surface. In addition, preheating exerted great influence on wetting and spreading ability of Zn filler on brass surface. The microstructure observation showed the thickness of reaction layer (CuZn phase) at the interface of the brass side would grow with the increase in laser power and the decrease in the laser defocusing distance. Moreover, preheating could increase the spreading area of the filler metal and induced the growth of the reaction layer. The highest tensile–shear load of the joint could reach 2100 N, which was 80% of that of Al alloy base metal. All the joints fractured along the CuZn reaction layer and brass interface. The fracture morphology displayed the characteristics of the cleavage fracture when without preheating before welding, while it displayed the characteristics of the quasi-cleavage fracture with preheating before welding.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Macro-micro multiscale modeling to assist the design of HPDC Al castings microstructure and alloys for EV super-large body structures (Phase 1)

Implementation of High Pressure Die Casting (HPDC) Aluminum (Al) body structures for high volume electrified vehicles (EV) to improve electric efficiency remains a key strategy within many original equipment manufacturer (OEM)s. In addition to high strength for safety requirements, superior Self-Piercing Riveting (SPR) performance is demanded for HPDC Al alloys to be compatible with high volume SPR joining. In this work, it is proposed to extend and validate an existing Contractor finite element multiscale macro-micro modeling approach to quantify the influence of the microstructure of HPDC alloys on the fracture strain/displacement under 3-point bend and clinch testing. The success of this work will allow to replace solution treatment stage with low energy consumption heat treatment (HT) processes, or to design new non heat treatable (NHT) HPDC Al alloys to eliminate HT requirements. Ultimately, this project will facilitate the application of HPDC Al alloys for super-large vehicle structures to significantly reduce vehicle weight, and thus improving energy efficiency. The purpose of this project is to extend and validate an existing finite element code, which is based on the Contractor developed macro-micro multi-scale modeling approach, to numerically simulate the three-point bending and clinch test and study the influences of material microstructural characteristics and phase properties on the rivetability. The macro-micro modeling approach begins with a sample scale model and identify the location, which is mostly prone to failure, the deformation history of the boundaries of that location calculated will be used to drive a microstructure-based sub-models where the material microstructure and microscale properties are considered. Using this approach, the wrap-bending failure for two Al alloys are correctly predicted for the first time. This will start with phase I effort of building a framework of macro-micro three point bending test and clinch test of Al10SiMgMn HPDC alloy in the as-cast and T7 heat treated conditions. Those results will then be validated with experimental test results. The phase II effort will involve the utilization of the knowledge learned in phase I to establish the quantitative correlation between the microstructure characteristics and the riveting performance, which will be further used to guide the optimization of HPDC Al alloy microstructure using heat treatment process to achieve sufficient rivetability to join large thin-wall HPDC alloys.

36 MATERIALS SCIENCE↗