Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALOGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Sulfate attack expansion mechanisms

A specially constructed stress cell was used to measure the stress generated in thin-walled Portland cement mortar cylinders caused by external sulfate attack. The effects of sulfate concentration of the storage solution and C{sub 3}A content of the cement were studied. Changes in mineralogical composition and pore size distribution were investigated by X-ray diffraction and mercury intrusion porosimetry, respectively. Damage is due to the formation of ettringite in small pores (10–50 nm) which generates stresses up to 8 MPa exceeding the tensile strength of the binder matrix. Higher sulfate concentrations and C{sub 3}A contents result in higher stresses. The results can be understood in terms of the effect of crystal surface energy and size on supersaturation and crystal growth pressure.

36 MATERIALS SCIENCE↗

Simultaneous assessment of phase chemistry, phase abundance and bulk chemistry with statistical electron probe micro-analyses: Application to cement clinkers

According to recent developments in cement clinker engineering, the optimization of chemical substitutions in the main clinker phases offers a promising approach to improve both reactivity and grindability of clinkers. Thus, monitoring the chemistry of the phases may become part of the quality control at the cement plants, along with the usual measurements of the abundance of the mineralogical phases (quantitative X-ray diffraction) and the bulk chemistry (X-ray fluorescence). This paper presents a new method to assess these three complementary quantities with a single experiment. The method is based on electron microprobe spot analyses, performed over a grid located on a representative surface of the sample and interpreted with advanced statistical tools. This paper describes the method and the experimental program performed on industrial clinkers to establish the accuracy in comparison to conventional methods. -- Highlights: •A new method of clinker characterization •Combination of electron probe technique with cluster analysis •Simultaneous assessment of phase abundance, composition and bulk chemistry •Experimental validation performed on industrial clinkers.

36 MATERIALS SCIENCE↗

Kinetics of lime/bentonite pozzolanic reactions at 20 and 50 °C: Batch tests and modeling

The effects of duration (1–100 days) and temperature (20 and 50 °C) were assessed from batch tests for Ca-bentonite mixed with 10 wt.% lime. The pozzolanic processes were monitored over time by {sup 29}Si NMR (Cement Concr. Res. 42, 2012), TGA-DTA, XRD and chemical analysis. Modeling considered kinetics and thermodynamics of mineralogical transformations and cation exchange. Kinetic laws were dependent on pH and temperature (Arrhenius energy). Lime hydration occurs within hours, modifying the bentonite exchangeable population and increasing the pH. These alkaline conditions initiate the pozzolanic reactions in a second stage. The rate-limiting step is the dissolution kinetics of the bentonite minerals, i.e. a relatively fast and total consumption of cristobalite in parallel to a long-term slower dissolution of montmorillonite. First C–S–H and then C–A–S–H are formed consequently. Temperature speeds up the pozzolanic reaction kinetics by a factor 5 from 20 to 50 °C, corresponding to an apparent activation energy of 40–50 kJ/mol.

36 MATERIALS SCIENCE↗

An X-ray photoelectron spectroscopy study of the hydration of C{sub 2}S thin films

Electron-beam evaporation was used to produce thin films of β-dicalcium silicate. Chemical and mineralogical compositions were characterized by X-ray photoelectron spectroscopy (XPS) and grazing-angle X-ray diffraction (GAXRD), respectively. Results show that no fractionation occurs during evaporation and isostructural condensation of the material as synthesized films have the same composition as the initial bulk material. Samples were gradually hydrated under saturated water spray conditions and analyzed with XPS. Polymerization of the silicate chains due to hydration, and subsequent formation of C-S-H, has been monitored through evaluation of energy shifts on characteristic silicon peaks. Quantitative analyses show changes on the surface by the reduction of the Ca/Si ratio and an increase on the difference between binding energies of bridging and non-bridging oxygen. Finally, SEM/FIB observation shows clear differences between the surface and cross section of the initial sample and the reacted sample.

36 MATERIALS SCIENCE↗

Degradation processes of reinforced concretes by combined sulfate–phosphate attack

A novel form of alteration due to the interaction between hydrated cement phases and sulfate and phosphate-based pollutants is described, through the characterization of concrete samples from an industrial reinforced concrete building. Decalcification of the cement matrices was observed, with secondary sulfate and phosphate-based mineral formation, according to a marked mineralogical and textural zoning. Five alteration layers may be detected: the two outermost layers are characterized by the presence of gypsum–brushite solid solution phases associated with anhydrous calcium sulfates and phosphates, respectively, while a progressive increase in apatite and ammonium magnesium phosphates is observable in the three innermost layers, associated with specific apatite precursors (brushite, octacalcium phosphate and amorphous calcium phosphate, respectively). The heterogeneous microstructural development of secondary phases is related to the chemical, pH and thermal gradients in the attacked cementitious systems, caused by different sources of pollutants and the exposure to the sun's radiation.

36 MATERIALS SCIENCE↗

Spatial distribution of crystalline corrosion products formed during corrosion of stainless steel in concrete

The mineralogy and spatial distribution of nano-crystalline corrosion products that form in the steel/concrete interface were characterized using synchrotron X-ray micro-diffraction (μ-XRD). Two types of low-nickel high-chromium reinforcing steels embedded into mortar and exposed to NaCl solution were investigated. Corrosion in the samples was confirmed by electrochemical impedance spectroscopy (EIS). μ-XRD revealed that goethite (α-FeOOH) and akaganeite (β-FeOOH) are the main iron oxide–hydroxides formed during the chloride-induced corrosion of stainless steel in concrete. Goethite is formed closer to the surface of the steel due to the presence of chromium in the steel, while akaganeite is formed further away from the surface due to the presence of chloride ions. Detailed microstructural analysis is shown and discussed on one sample of each type of steel. - Highlights: • Synchrotron micro-diffraction used to map the distribution of crystalline phases. • Goethite and akaganeite are the main corrosion products during chloride induced corrosion in mortar. • Layers of goethite and akaganeite are negatively correlated. • EDS showed Cr present in corrosion products identified by SEM.

36 MATERIALS SCIENCE↗

Elemental zonation in marine concrete

This paper presents a large collection of microstructural studies on concretes exposed to marine environments for periods between 2 and 34 years. The phase changes were studied using optical as well as scanning electron microscopy. A total of 21 concretes, taken from 9 different locations along the Norwegian and Danish coastlines, were investigated. Chemical zonation and mineralogical zonation were observed in the surface regions of marine-exposed concrete. Three zones were found irrespective of the age, location or binder composition: a magnesium-rich zone, a sulfur-rich zone, and a chlorine-rich zone. The absence of major damage indicates that the observed phase changes led only to minor scaling. This suggests that, rather than sulfate attack, sea water merely causes sulfur enrichment.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of elevated temperature on alkali-activated geopolymeric binders compared to portland cement-based binders

This research focused on developing thermally-stable materials based on alkali-activation of slag, fly ash, and metakaolin compared to portland cement mixtures by using a hierarchical approach to material design. At lower length scales, X-ray diffraction (XRD) characterized the mineralogy that coupled to higher length scale experiments using thermogravimetric analysis (TGA) for determining the materials thermal stability. Additionally, high-energy X-ray computed microtomography (μCT) determined the best-performing material formulation that minimized thermal damage when exposed to high temperatures (650 °C). The thermal loading was ramped up to 650 °C from ambient temperature in 60 s and then held for a total of 10 min. The μCT identified that the alkali-activated fly ash mortar had less initial porosity than the ordinary portland cement mixtures, with more than 66% of the pores between 20 and 50 μm in diameter. Consequently, the alkali-activated fly ash mortar was able to dissipate approximately 565 °C in just 50 mm of material, outperforming all the other mixes studied in this paper with μCT confirming minimal damage after the temperature exposure.

36 MATERIALS SCIENCE↗

A chemical/mineralogical investigation of the behavior of sulfoaluminate binders submitted to accelerated carbonation

The paper addresses the carbonation of CSA based binders from the mechanical, chemical and mineralogical point of view. Three different binders have been investigated, revealing that many hydrated phases can protect ettringite against carbonation. In particular, the presence of AFm phases gives a significant contribution to buffer the pH in alkaline range and to preserve the protective film of steel reinforcement bars. In a carbonated environment AFm phases act as ionic exchangers: carbonate ions replace sulfates in the interlayer and in these conditions the released sulfate ions contribute to the formation of new ettringite, with a beneficial effect on compressive strength performances. Experimental data are compared with models and carbonation mechanisms are described.

36 MATERIALS SCIENCE↗

Effect of chloride ingress on self-healing recovery of smart cementitious composite incorporating crystalline admixture and MgO expansive agent

Highlights: • Crack closure under wet/dry cycles in chloride solution is higher than the one in distilled water. • Element analysis shows that calcium is vital for crack healing either in water or chloride solution. • AFm is consumed by chloride ion to form Fs, and Fs were decomposed to AH{sub 3} by carbonation. • Soluble reactive silica reacts with calcium hydrate to form C-S-H gel to heal concrete cracks. • Expansion of magnesium hydroxide facilitates crack self-healing by interconnected network. In this study, the effect of chloride environment containing various concentrations of chloride ion (Cl{sup −}) on self-healing performance of pre-cracked cementitious composite containing crystalline admixture (CA) and MgO expansive agent (MEA) was investigated under wet-dry cycles in chloride solutions. The results revealed that the Cl{sup −} changed the mineralogy of self-healing products, and consequently, affected the crack closure ratio and mechanical strength recovery. When self-healing occurred in distilled water, a large amount of ettringite (AFt) were detected, whereas in Cl{sup −} solution, monosulfate (AFm) was consumed by Cl{sup −} to form Friedel's salt (Fs), and then the Fs was decomposed to Al(OH){sub 3}(AH{sub 3}) due to carbonation. During the multiphase conversion process, hydroxide (OH{sup −}) was released into crack solution, therefore the dissolved carbon dioxide (CO{sub 2}) concentration was increased. The carbonation of the crystals formed in cracks was accelerated with the volume expansion, which achieved rapid crack sealing but contributed little to the mechanical performance recovery.

36 MATERIALS SCIENCE↗

Performance of concrete under accelerated physical salt attack and carbonation

Conventional testing of physical salt attack (PSA) on concrete does not consider concomitant factors that may exist in service and alter the mechanisms and kinetics of PSA. This study adopted a combined testing approach where concrete was concurrently investigated under accelerated PSA and carbonation, simulating elements serving in heavy traffic and industrial zones, while implementing ambient conditions similar to that in geographic locations with previous cases of PSA. Based on the tested mixture design parameters [water-to-binder ratio, cement type, and supplementary cementitious materials], potential performance improvement and risks were identified. Thermal, mineralogical, and microscopy analyses elucidated the co-occurrence of complex degradation processes in concrete subjected to accelerated PSA and carbonation, which were distinctive from that induced by the single-factor PSA exposure. The synoptic results from this study may informatively improve guidance on mixture design of concrete when dual exposure to PSA and carbonation is expected in the field.

36 MATERIALS SCIENCE↗

Development of a stoichiometric magnesium potassium phosphate cement (MKPC) for the immobilization of powdered minerals

Ordinary Portland Cement (OPC)-based materials are not systematically adapted for immobilizing industrial hazardous waste, e.g. for aluminium powder or plutonium waste sludge. In such case, Magnesium Potassium Phosphate Cements (MKPC) represent an interesting alternative. }The originality of this research is to develop a formulation of a MKPC paste for hazardous waste immobilization, which incorporates a maximum amount of such waste, preferably in powdered form. To this purpose, a stoichiometric MKPC paste is selected, and its properties are improved by powdered waste addition. }Firstly, the physico-chemical mechanisms generating expansion in stoichiometric MKPC paste are analyzed. Swelling is attributed to a pH gradient in the paste, due to the progressive sedimentation of MgO particles in the fresh mix. }Secondly, over-stoichiometric MgO is replaced by varying amounts of minerals simulating the waste, of different mineralogy and granulometry, in order to achieve sufficient workability and no swelling. An optimal formulation is proposed, which incorporates powdered fly ash at a fine-to-cement mass ratio (F/C) of 1. Its mechanical performance and endogenous dimensional changes are comparable to typical over-stoichiometric pastes, and they stabilize between 7 and 28 days.

36 MATERIALS SCIENCE↗

Silica-modifying chemical admixtures for directed zeolitization of metakaolin-based alkali-activated materials

The effect of using trimethyladamantyl-ammonium hydroxide (TMAAOH) as a silica-modifying admixture to induce early-age mineralization during alkali-activation of metakaolin was investigated and reported herein. In all material formulations, the use of TMAAOH induced early-age mineralization, increased mixture stiffening in the fresh state, and lowered total heat of reaction. In activating solutions with silica moduli above unity (Ms >1.0), mineralogy results demonstrate that TMAAOH induces the nucleation and growth of metastable zeolitic phases, which correlated with increased permeability and increased plastic shrinkage of the paste. When TMAAOH was added to activating solutions with silica moduli near unity (Ms ~1.0), the controlled formation of crystalline, silica-rich faujasite was observed, which correlated with reduced permeability and lower plastic shrinkage. Together, these results demonstrate for the first time that silica-templating agents such as TMAAOH can be exploited in the design of new chemical admixtures that directly influence the dynamics of zeolitization in alkali-activated materials.

36 MATERIALS SCIENCE↗

Boosting the use of bauxite residue (red mud) in cement - Production of an Fe-rich calciumsulfoaluminate-ferrite clinker and characterisation of the hydration

Highlights: • Incorporation of 35 wt% of bauxite residue for production of CSAF clinker • Thermochemical calculations as suitable tool for predicting phase assemblage • Hydration of the cement was found to be accelerated in contrast to other CSA cements. • High early compressive strengths of 40 MPa In the present work, calciumsulfoaluminate-ferrite clinker was produced using 35 wt% of bauxite residue in combination with alumina, clay, limestone and gypsum. At a temperature of 1300 °C, the hydraulic phases ye'elimite, ferrite and C{sub 2}S were formed. Computed thermochemical predictions were a significantly better match for the real mineralogy than modified Bogue equations. Hydration of the clinker led to the formation of ettringite and monosulfate, resulting in compressive strengths of 17 MPa after 28d. Compressive strengths of 40 MPa after 2d, and 28d-strengths exceeding 50 MPa, were reached in blends with 10 wt% of anhydrite. The strength development was due to the rapid formation of ettringite, mainly originating from ye'elimite, which did not convert to AFm phases and led to a compact microstructure. Only when the ye'elimite dissolution decreased, did the ferrite phase react. In pastes with additional sulfates, ferrite hydration led to the formation of ettringite and to hydrogarnet. Cement nomenclature is used in this work.{sup 1}.

36 MATERIALS SCIENCE↗

Clinkerless ultra-high strength concrete based on alkali-activated slag at high temperatures

This work investigates the degradation mechanisms of clinkerless alkali-activated slag based ultra-high strength concrete (AAS-UHSC) upon exposure to high temperatures up to 800 °C. The heat-induced mechanical, mineralogical, molecular, microstructural, and pore structure alterations of AAS-UHSC prepared with various activator types, water-to-powder ratios, and fiber incorporation are studied. The results demonstrate the beneficial roles of potassium incorporation on improving the thermal stability and integrity of AAS-UHSC, via suppressing deleterious crystallization and transformation of aluminosilicate phases at high temperature. In contrast to Portland cement clinker-based UHSC, no sign of explosive spalling is observed in AAS-UHSC, likely due to the presence of microcracks that enhance the pore network connectivity. The mechanical degradation of AAS-UHSC at high temperature below 600 °C is resulted from dehydration and decomposition of phases and consecutive thermal cracking, together with enlarged porosity and coarsened pore structure. As the temperature rising to 800 °C, crystallization and transformation of phases, as well as formation of porous microstructure, considerably aggravate the mechanical degradation of AAS-UHSC. In contrast to the thermal damage mitigation by polymeric fibers in conventional UHSC, the fiber incorporation has little positive impact on the thermal resistance of AAS-UHSC.

36 MATERIALS SCIENCE↗

Synthesis and characterisation of alites from reduced basic oxygen furnace slags

Basic oxygen furnace slags (BOFS) are by-products of the steelmaking process. Several researchers have studied the production of Portland cement clinker and metallic iron from BOFS via a reductive treatment. }In this study, we applied a carbothermal reduction of BOFS in a technical-scale electric arc furnace and characterised the clinker-like products. Those clinker-like non-metallic products (NMPs) had a chemical and mineralogical composition comparable to clinker for ordinary Portland cement (OPC) and contained large elongated alite crystals as major component. The pure NMPs reacted more slowly and achieved a lower degree of hydration compared with commercial OPC. }If the reactivity of the products can be further increased by employing specific adaptations, it can be used as a full clinker substitute for OPC. Nevertheless, it is also an option to use the material without further modifications as a cement component or concrete addition, which contributes to the strength development in both cases.

36 MATERIALS SCIENCE↗

An insight on the effect of sodium and silicon on microstructure and crystallography of high alumina cements

In the present study the influence of minor elements (Na{sub 2}O and SiO{sub 2}) on the mineralogy, chemistry and microstructure of High Alumina Cements (HACs) has been investigated. HACs have several advantages respected to Ordinary Portland Cement (OPC) but the shortage of Al-rich raw materials represents a limiting factor: re-use of Al-rich waste as raw material represents a solution but it will add minor elements to the raw meal that could change HACs properties. For the first time, four commercial HACs, doped with sodium and silicon, and one synthetic HAC, only highly doped in sodium, were studied through a multidisciplinary approach by combining conventional and unconventional analytical techniques. Results highlighted that (i) sodium and silicon were mainly incorporated in a sodium-rich phase (Na-phase, NCA{sub 2}, Na{sub 1.9}CaAl{sub 3.9}Si{sub 0.1}O{sub 8}), (ii) no minor phases such as gehlenite and/or mayenite occurred, and (iii) CA (CaAl{sub 2}O{sub 4}) and CA{sub 2} (CaAl{sub 4}O{sub 7}) revealed a limited ionic substitution.

36 MATERIALS SCIENCE↗

Multi-scale Detection of Organic and Inorganic Signatures Provides Insights into Gas Shale Properties and Evolution

Organic geochemical analyses, including solvent extraction or pyrolysis, followed by gas chromatography and mass spectrometry, are generally conducted on bulk gas shale samples to evaluate their source and reservoir properties. While organic petrology has been directed at unravelling the matrix composition and textures of these economically important unconventional resources, their spatial variability in chemistry and structure is still poorly documented at the sub-micrometre scale. Here, a combination of techniques including transmission electron microscopy and a synchrotron-based microscopy tool, scanning transmission X-ray microscopy, have been used to characterize at a multiple length scale an overmature organic-rich calcareous mudstone from northern Germany. We document multi-scale chemical and mineralogical heterogeneities within the sample, from the millimetre down to the nanometre-scale. From the detection of different types of bitumen and authigenic minerals associated with the organic matter, we show that the multi-scale approach used in this study may provide new insights into gaseous hydrocarbon generation/retention processes occurring within gas shales and may shed new light on their thermal history.

04 OIL SHALES AND TAR SANDS↗