Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

Electrical and optical properties of Sn doped CuInO{sub 2} thin films: Conducting atomic force microscopy and spectroscopic ellipsometry studies

Tin doped CuInO{sub 2} thin films deposited by rf magnetron sputtering technique show columnar structure with (006) preferred orientation. Conducting atomic force microscopy measurements show the presence of nanoconductivity regions when the current flow direction is along the in-plane InO{sub 6} layer and absence of conducting regions when the current direction is along O-Cu-O layers perpendicular to the film surface. The strong anisotropy observed in the electrical properties of tin doped samples is due to the preferred crystallite orientation and highly anisotropic delafossite structure. A large change in the electrical conductivity value and activation energy value in undoped films and tin doped samples has also been explained in terms of change in crystallite orientation on doping. Spectroscopic ellipsometry measurements have been used to determine the optical constant and dielectric function of CuInO{sub 2} and CuInO{sub 2}:Sn films and show a band gap value of 4.5 eV in tin doped samples due to removal of structural defects.

36 MATERIALS SCIENCE↗

Phase transitions and electrical behavior of lead-free (K{sub 0.50}Na{sub 0.50})NbO{sub 3} thin film

Lead-free (K{sub 0.50}Na{sub 0.50})NbO{sub 3} (KNN) thin films with a high degree of (100) preferred orientation were deposited on the SrRuO{sub 3}-buffered SrTiO{sub 3}(100) substrate by off-axis radio frequency magnetron sputtering. They possess lower phase transition temperatures (T{sub o-t}approx120 deg. C and T{sub c}approx310 deg. C), as compared to those of KNN bulk ceramic (T{sub o-t}approx190 deg. C and T{sub c}approx400 deg. C). They also demonstrate enhanced ferroelectric behavior (e.g., 2P{sub r}=24.1 muc/cm{sup 2}) and fatigue endurance, together with a lower dielectric loss (tan deltaapprox0.017) and a lower leakage current, as compared to the bulk ceramic counterpart. Oxygen vacancies are shown to be involved in the conduction of the KNN thin film.

36 MATERIALS SCIENCE↗

Highly dense amorphous Nb{sub 2}O{sub 5} films with closed nanosized pores

This study is focused on tailoring the porosity of Nb{sub 2}O{sub 5} films during reactive pulsed magnetron sputtering. Dense amorphous films containing nanopores only in deeper regions have been grown at a high rate using substrate temperatures below 60 deg. C. The films exhibit a high refractive index, n{sub 400}=2.54, a low extinction coefficient, k{sub 400}{approx}6x10{sup -4}, a low mechanical stress (-90 MPa), and a negligible thermal shift. The specific depth distribution of the nanopores is believed to be the reason for the optimum trade-off between a high refractive index and low mechanical stress.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modification of magnetic properties and structure of Kr{sup +} ion-irradiated CrPt{sub 3} films for planar bit patterned media

30 keV Kr{sup +} ions were irradiated onto L1{sub 2} ordered CrPt{sub 3} (20 nm) alloy films fabricated by a magnetron sputtering deposition followed by an appropriate heat treatment, and the modification of the structure and magnetic properties of the CrPt{sub 3} films was investigated in detail. The fabricated L1{sub 2}CrPt{sub 3} (20 nm) onto a fused quartz substrate exhibited a quite large perpendicular anisotropy of 5x10{sup 6} ergs/cc, due to the large lattice distortion of 1%. The large perpendicular anisotropy decreased with increasing the ion dose, and became almost zero at the ion dose of 2x10{sup 14} ions/cm{sup 2} due to the loss of the magnetic order of CrPt{sub 3}. The suppression of the magnetic order of CrPt{sub 3} by the Kr{sup +} ion irradiation is attributed to the transformation of the structure from the L1{sub 2} phase to a disordered fcc phase, which was confirmed by x-ray diffraction analysis. Unlike the magnetization and perpendicular anisotropy, the anisotropy field of CrPt{sub 3} does not decrease significantly with the increase in the Kr{sup +} ion dose, and exhibited more than 20 kOe even at the ion dose of 1x10{sup 14} ions/cm{sup 2}. This is considered to be attributed that the lattice distortion of CrPt{sub 3} unchanged even at the Kr{sup +} ion dose of 2x10{sup 14} ions/cm{sup 2}.

36 MATERIALS SCIENCE↗

Scaling of surface roughness in sputter-deposited ZnO:Al thin films

We have studied surface roughness scaling of ZnO:Al thin films grown by rf magnetron sputtering of a compound target within framework of the dynamic scaling theory using atomic force microscopy. We have observed a crossover in scaling behavior of surface roughness at a deposition time of 25 min. Both the regimes are characterized by power-law dependence of local surface width w(r,t) on deposition time for small r, typical of anomalous scaling. The scaling exponents for the first regime indicate the existence of a new dynamics. For t>=25 min, the films follow super-rough scaling behavior with global exponents alpha=1.5+-0.2 and beta=1.03+-0.01, and local exponents alpha{sub local}=1 and beta{sub local}=0.67+-0.05. The anomaly in the scaling behavior of the films is discussed in terms of the shadowing instability and bombardment of energetic particles during growth of the films.

36 MATERIALS SCIENCE↗

Ethanol gas sensitivity of carbon nanotip arrays/n-Si heterojunctions at room temperature

Carbon nanotip arrays were grown from silicon substrates via direct current magnetron sputtering at room temperature (RT). The simple carbon nanotip arrays/n-Si (C/Si) heterojunctions were used to detect ethanol gas at RT. The results show that the C/Si junctions have high ethanol gas sensitivity, rapid response, and high recovery speed at RT. Upon exposure to ethanol gas (0.64 g/l) at RT, the resistance of the junction decreases by 35% at a given positive voltage of 8 V. Moreover, the interface capacitance of the junction at 5 kHz can increase by about 40% rapidly when exposed to ethanol gas. The phenomena should be attributed to the change in the Fermi level of the carbon film caused by adsorbing electrons from ethanol molecules. The study shows that the C/Si junctions have potential application as ethanol gas sensors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The role of copper in ZnO/Cu/ZnO thin films for flexible electronics

ZnO/Cu/ZnO multilayer structures with very high conductivity have been obtained by magnetron sputtering. The Hall resistivity of the films was as low as 6.9x10{sup -5} OMEGA-cm with a carrier concentration of 1.2x10{sup 22} cm{sup -3} at the optimum copper layer thickness. The conduction mechanism has been explained in terms of metal to oxide carrier injection at low copper thickness and metal layer conduction at higher Cu thicknesses. The peak transmittance of the films is 88% and the photopic averaged transmittance is 75%. Optical transmission behavior of the films involves absorption by copper due to d-band to Fermi-surface transitions at short wavelengths and reflectance combined with scattering losses at long wavelengths. A Burstein-Moss shift in the band gap of the films is seen to take place with increase in thickness of the copper layer. The Haacke figure of merit has been calculated for the films with the best value being 8.7x10{sup -3} OMEGA{sup -1}. Pole figure results reveal that the copper midlayer acts as a hindrance to (002) ZnO texturing rather than as a seed layer. These results also confirm the mechanism of conduction. The results of the study assume further significance because annealing at 150 deg. C for up to 24 h in a reducing (Ar+5% H{sub 2}) ambient was found to have negligible effect on the properties of the films.

36 MATERIALS SCIENCE↗

Dynamic in situ observations of electrical and structural changes in thin thermoelectric (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} films

Thin films of (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} were prepared by dc magnetron sputter deposition on different substrates. It is well known that thermal treatment of as-deposited p-type (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} films leads to an enhancement of the power factor. Whereas up to now only the initial (as deposited) and the final (after annealing) film stages have been investigated, here, the dynamic changes of sputter-deposited film properties have been observed by in situ measurements. The enhancement of the power factor shows a significant dependence on thermal treatment. The best thermoelectric films have been prepared at a substrate temperature of 170 deg. C, with a power factor of 24.4 muW/(cm K{sup 2}). The changes in the Seebeck and Hall coefficients are caused by the enhancement in the Hall mobility after annealing. In situ x-ray diffractometry shows the generation of additional Te in dependence of the temperature. This is also confirmed by energy-dispersive x-ray microanalysis and the corresponding mapping in a scanning electron microscope. It is supposed that the locally well-defined Te enrichment is the reason for the improvement in the integral film transport properties.

36 MATERIALS SCIENCE↗

Chemical structure of the (Zn{sub 1-x},Mg{sub x})O/CuIn(S,Se){sub 2} interface in thin film solar cells

The formation of the interface between a magnetron sputtered (Zn{sub 1-x},Mg{sub x})O buffer layer and a CuIn(S,Se){sub 2} absorber in thin film solar cells has been investigated by x-ray photoelectron spectroscopy and x-ray induced Auger electron spectroscopy. Detailed analysis of the spectra shows the incorporation of Zn into the absorber surface in the initial stage of the deposition process forming ZnS and/or ZnSe bonds. As a result we find the buffer layer to be Zn-depleted near the interface.

36 MATERIALS SCIENCE↗

Selective liquid crystal molecule orientation on ion beam irradiated tantalum oxide ultrathin films

We recently achieved the homogeneous alignment of liquid crystal (LC) on amorphous Ta{sub 2}O{sub 5} layers. This study demonstrates that LC layers could be aligned either homogeneously or vertically by increasing the growth temperature of rf magnetron sputtering device and the irradiation time of the DuoPIGatron type Ar ion beam device causing uniform and dense plasma. We attained two LC orientations by observing Ta 4f and O 1s peak shifts with x-ray photoelectron spectroscopy. Moreover, the decreased thickness of layers with high-k dielectric constants helped to decrease driving LC voltages and in turn to achieve low power consumption.

36 MATERIALS SCIENCE↗

Double side electroluminescence from p-NiO/n-ZnO nanowire heterojunctions

Double side light emission devices based on p-NiO/n-ZnO nanowire heterojunctions have been fabricated on indium tin oxide substrate by radio frequency magnetron sputtering combined with hydrothermal process. According to the energy band alignment, the detected broad visible and narrow ultraviolet electroluminescence arise from defect and band edge transitions in ZnO nanowires, respectively. The unique property of the double side emission is due to the nature of the large band gap of NiO film. It provides a good opportunity for the emission of a light emitting device with different colors on the top and back sides, simultaneously.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of strain and grain boundary variations on magnetism of Cr-doped AlN films

Cr-doped AlN films are prepared by reactive dc magnetron cosputtering under a negative substrate bias ranging from 50 to 110 V. The bias induces variation of the texture from (002) to (110) orientation, enhances the stress and reduces the grain size in the films. All of the samples are ferromagnetic. The atomic magnetic moment (AMM) of Cr increases with the bias from 50 to 90 V and reaches the maximum of 0.18mu{sub B}/Cr at a bias of 90 V. As the bias increases further to 110 V, the AMM decreases. The dielectric constant also changes in the same trend with the bias, as well as the AMM does. The variations in these two properties are determined by the collective effects of the lattice deformations induced by the changing stress, the amount of boundary defects and the grain size in the films.

36 MATERIALS SCIENCE↗

Size and spatial homogeneity of SiGe quantum dots in amorphous silica matrix

In this paper, we present a study of structural properties of SiGe quantum dots formed in amorphous silica matrix by magnetron sputtering technique. We investigate deposition conditions leading to the formation of dense and uniformly sized quantum dots, distributed homogeneously in the matrix. X-ray and Raman spectroscopy were used to estimate the Si content. A detailed analysis based on grazing incidence small angle x-ray scattering revealed the influence of the deposition conditions on quantum dot sizes, size distributions, spatial arrangement, and concentration of quantum dots in the matrix, as well as the Si:Ge content.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Conduction mechanism of sputtered BaTiO{sub 3} film on Ni substrate

BaTiO{sub 3} (BTO) thin film capacitors were deposited on Ni substrate using rf magnetron sputtering. Microstructural studies by x-ray diffraction and transmission electron microscopy reveal that the as-grown BTO films have the columnar structure and the good interface structure. Postdeposition anneal results in the recrystallization of BTO films. The electrical measurements exhibit that the BTO films have high capacitance densities and low leakage currents.

36 MATERIALS SCIENCE↗

Light absorption in silicon quantum dots embedded in silica

The photon absorption in Si quantum dots (QDs) embedded in SiO{sub 2} has been systematically investigated by varying several parameters of the QD synthesis. Plasma-enhanced chemical vapor deposition (PECVD) or magnetron cosputtering (MS) have been used to deposit, upon quartz substrates, single layer, or multilayer structures of Si-rich-SiO{sub 2} (SRO) with different Si content (43-46 at. %). SRO samples have been annealed for 1 h in the 450-1250 deg. C range and characterized by optical absorption measurements, photoluminescence analysis, Rutherford backscattering spectrometry and x-ray Photoelectron Spectroscopy. After annealing up to 900 deg. C SRO films grown by MS show a higher absorption coefficient and a lower optical bandgap (approx2.0 eV) in comparison with that of PECVD samples, due to the lower density of Si-Si bonds and to the presence of nitrogen in PECVD materials. By increasing the Si content a reduction in the optical bandgap has been recorded, pointing out the role of Si-Si bonds density in the absorption process in small amorphous Si QDs. Both the photon absorption probability and energy threshold in amorphous Si QDs are higher than in bulk amorphous Si, evidencing a quantum confinement effect. For temperatures higher than 900 deg. C both the materials show an increase in the optical bandgap due to the amorphous-crystalline transition of the Si QDs. Fixed the SRO stoichiometry, no difference in the optical bandgap trend of multilayer or single layer structures is evidenced. These data can be profitably used to better implement Si QDs for future PV technologies.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Adjustable resonance frequency and linewidth by Zr doping in Co thin films

Co{sub 100-x}Zr{sub x} (40 nm) thin films with different Zr compositions were grown on silicon substrates by radio frequency magnetron sputtering. The coercivity decreased with an increase in the Zr composition. A uniaxial anisotropy existed in the Co{sub 100-x}Zr{sub x} films, and the anisotropy field of the films decreased from 55 to 40 Oe with the increase of Zr composition. The resonance frequency and linewidth were decreased with the increase of the Zr composition during the permeability measurements. For samples with x=0 and 9, the magnetic anisotropy effective field and saturated field were obtained by fitting the external magnetic field dependent resonance frequency with Landau-Lifschitz-Gilbert equation. Therefore, it is an effective way to get the adjustable anisotropy field and linewidth, which is desirable for obtaining the high resonance and high permeability ferromagnetic film materials for high frequency application.

36 MATERIALS SCIENCE↗

Orientation dependence of ferroelectric behavior of BiFeO{sub 3} thin films

Multiferroic BiFeO{sub 3} (BFO) thin films with (111), (100), (110) preferred, and random orientations were deposited by radio frequency magnetron sputtering on SrRuO{sub 3}-buffered SrTiO{sub 3}(111), SrTiO{sub 3}(100), SrTiO{sub 3}(110), and Pt(111)/Ti/SiO{sub 2}/Si(100) substrates, respectively. The orientation dependences of ferroelectric and fatigue behavior of the BFO thin films were investigated. As expected, the (111)-oriented BFO thin film exhibits the highest, giant ferroelectric polarization (2P{sub r}=196.9 muC/cm{sup 2}) at 1 kHz and room temperature using positive up negative down measurement, while the (100)-oriented BFO thin film possesses an almost fatigue-free behavior up to 5.25x10{sup 7} switching cycles when measured at 100 kHz and room temperature. The observed behavior confirms that the largest spontaneous polarization direction and the fatigue endurance are (111) and (100) for BFO thin films, respectively. Regardless of the film orientation, the charge carriers that are responsible for dielectric relaxation and conductivity are oxygen vacancies (V{sub O}) .

36 MATERIALS SCIENCE↗

On the dynamic roughening transition in nanocomposite film growth

Surface roughness and dynamic growth behavior of TiC/a-C nanocomposite films deposited by nonreactive pulsed-dc (p-dc) magnetron sputtering were studied using atomic force microscopy, cross-sectional scanning, and transmission electron microscopy. From detailed analyses of surface morphology and growth conditions, it is concluded that a transition in growth mechanisms occurs, i.e., a mechanism dominated by geometric shadowing at a p-dc frequency of 100 kHz evolving to a surface diffusion mechanism driven by impact-induced atomistic downhill flow process by Ar{sup +} ions at a p-dc frequency of 350 kHz. It is shown that rapid smoothening of initially rough surfaces with rms roughness from {approx}6 to <1 nm can be effectively achieved with p-dc sputtering at 350 kHz pulse frequency, leading to a transition from a strong columnar to a columnar-free microstructure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗