Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Lead”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

The structure and optical properties of nanocrytalline lead sulfide films

The crystal structure of lead sulfide (PbS) films produced by chemical deposition onto a glass substrate is studied by X-ray diffraction analysis. The thickness of the synthesized films is {approx}120 nm, the dimensions of the regions of coherent scattering are 70-80 nm, and the magnitude of microstrains is {approx}0.20%. It is established that the crystal structure of the synthesized PbS films and of the same films annealed at the temperature 293-423 K is cubic (space group Fm 3m) and corresponds to the D0{sub 3} type that differs from the B1 type typical of coarse-grained PbS. In the cubic structure of the PbS nanofilms, there is a latent nonstoichiometric distribution of S atoms and vacancies among octahedral sites 4(b) and tetrahedral positions 8(c). The optical transmittance of the nanocrystalline PbS films is measured in the wavelength range from 200 to 3270 nm. The most pronounced variations in the transmittance is observed in the wavelength range from 700-800 to 1600-2000 nm (corresponding to the photon energy range from {approx}1.8 to {approx}0.7 eV). It is established that the band gap E{sub g} is 0.83-0.85 eV, i.e., it is larger than the band gap of single-crystal PbS, 0.41 eV.

36 MATERIALS SCIENCE↗

On the Structure of the Mössbauer Spectra of {sup 119m}Sn Impurity Atoms in Lead Chalcogenides under Conditions of the Radioactive Equilibrium of {sup 119m}Te/{sup 119}Sb Isotopes

The method of Mössbauer emission spectroscopy with {sup 119m}Te and {sup 119}Sb parent isotopes in the radioactive-equilibrium state is used to obtain information on the localization and valence state of {sup 119m}Sn daughter atoms formed from the {sup 119}Sb and {sup 119m}Te parent atoms at cation and anion sites of the lattice of PbSe and PbTe lead chalcogenides.

36 MATERIALS SCIENCE↗

Properties of Lead-Sulfide Nanoparticles in a Multicrystalline Structure

The structural and electrical properties of PbS nanoparticles (40–70 nm), produced by a chemical reaction of sodium hydroxide with lead nitrate and electrophoretically deposited onto a conductive substrate, are investigated. The composition and structure of the nanoparticles are identified by X-ray analysis as pure PbS phase with a face-centered cubic lattice. Several minima, related to plasma-resonance absorption at 10–17 μm, are observed in the frustrated total internal reflection (FTIR) spectra. The layer morphology and the nanoparticle shape and sizes are determined by scanning electron and tunneling microscopy. The threedimensional topograms show that the surface fine structure is a set of faceted pyramidal spikes with a size of 5–10 nm and a density of ~400 μm{sup –2}. An analysis of the tunneling current–voltage characteristics of individual nanospikes shows the presence of low-field emission and makes it possible to determine the barrier heights (1.6–1.8 eV), which are explained within the quantum-dot (QD) model.

36 MATERIALS SCIENCE↗

A first principles study of the mechanical, electronic, and vibrational properties of lead oxide

The first principles study of the crystal structure, chemical bonds, elastic and mechanical properties, electron energy band structure and density, and normal long-wave vibrations of nine phases of lead monoxide, dioxide, and tetraoxide has been performed under normal and external pressure within the framework of density functional theory (DFT) with the Perdew–Becke–Ernzerhof (PBE) gradient exchange-correlation functional and its hybrid version with a 25-% Hartree–Fock (HF) exchange contribution in the basis of localized atom orbitals. The behavior of physical parameters has been studied using the cold four- and threeparameter equations of state. The parameters of the crystal structures are in satisfactory agreement with experimental data, and elastic constants indicate their mechanical stability and anisotropy in the elastic properties. The elasticity, shear, and Young moduli, hardness, acoustic velocities, and Debye temperature of dioxide on the one hand and monoxide and tetraoxide on the other hand appreciably differ from each other. The difference between electron properties may be explained by the character of hybridization in the upper filled and lower empty energy bands as evident from the density of states. In monoxide, the indirect band gap width decreases with increasing pressure at a rate of 0.16 eV/GPa, and the direct band gap width increases at a rate of 0.13 eV/GPa. To identify crystalline phases, the frequencies and intensities of long-wave modes active in IR and Raman spectra have been calculated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of Spent Fuel Assay with a Lead Slowing Down Spectrometer

Assay of fissile materials in spent fuel that are produced or depleted during the operation of a reactor, is of paramount importance to nuclear materials accounting, verification of the reactor operation history, as well as for criticality considerations for storage. In order to prevent future proliferation following the spread of nuclear energy, we must develop accurate methods to assay large quantities of nuclear fuels. We analyze the potential of using a Lead Slowing Down Spectrometer for assaying spent fuel. We conclude that it is possible to design a system that will provide around 1% statistical precision in the determination of the 239 Pu, 241 Pu and 235 U concentrations in a PWR spent-fuel assembly, for intermediate-to-high burnup levels, using commercial neutron sources, and a system of 238 U threshold fission detectors. Pending further analysis of systematic errors, it is possible that missing pins can be detected, as can asymmetry in the fuel bundle.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Observation of Unconventional Dynamics of Domain Walls in Uniaxial Ferroelectric Lead Germanate

Application of scanning probe microscopy techniques such as piezoresponse force microscopy (PFM) opens the possibility to re-visit the ferroelectrics previously studied by the macroscopic electrical testing methods and establish a link between their local nanoscale characteristics and integral response. It is reported that the nanoscale PFM studies and phase-field modeling of the static and dynamic behavior of the domain structure in the well-known ferroelectric material lead germanate Pb 5 Ge 3 O 11 . Here, several unusual phenomena are revealed: 1) domain formation during the paraelectric-to-ferroelectric phase transition, which exhibits an atypical cooling rate dependence; 2) unexpected electrically induced formation of the oblate domains due to the preferential domain walls motion in the directions perpendicular to the polar axis, contrary to the typical domain growth behavior observed so far; 3) absence of the bound charges at the 180 degrees head-to-head (H-H) and tail-totail (T-T) domain walls, which typically exhibit a significant charge density in other ferroelectrics due to the polarization discontinuity. This strikingly different behavior is rationalized by the phase field modeling of the dynamics of uncharged H-H and T-T domain walls. The results provide a new insight into the emergent physics of the ferroelectric domain boundaries, revealing unusual properties not exhibited by conventional Ising-type walls.

36 MATERIALS SCIENCE↗

Lead-free inverted planar formamidinium tin triiodide perovskite solar cells achieving power conversion efficiencies up to 6.22%

Efficient lead (Pb)-free inverted planar formamidinium tin triiodide (FASnI 3 ) perovskite solar cells (PVSCs) are demonstrated. Our FASnI 3 PVSCs achieved average power conversion efficiencies (PCEs) of 5.41% ± 0.46% and a maximum PCE of 6.22% under forward voltage scan. Here, the PVSCs exhibit small photocurrent–voltage hysteresis and high reproducibility. The champion cell shows a steady-state efficiency of ≈6.00% for over 100 s.

14 SOLAR ENERGY↗

A Lead‐Free Ferroelectric 2D Dion–Jacobson Tin Iodide Perovskite

2D hybrid organic–inorganic halide perovskites emerge as a new class of 2D semiconductors with the potential to combine excellent optoelectronic properties with symmetry-enabled properties such as ferroelectricity. Although many lead-based ferroelectric 2D halide perovskites are reported, there is yet to be a conclusive report of ferroelectricity in tin-based 2D perovskites. Here, the structures and properties of a new series of 2D Dion–Jacobson (DJ) Sn perovskites: (4AMP)SnI 4 , (4AMP)(MA)Sn 2 I 7 , and (4AMP)(FA)Sn 2 I 7 (4AMP = 4-(aminomethyl)piperidinium, MA = methylammonium, and FA = formamidinium), are reported. Structural characterization reveals that (4AMP)SnI 4 is polar with in-plane spontaneous polarization whereas (4AMP)(MA)Sn 2 I 7 and (4AMP)(FA)Sn 2 I 7 are centrosymmetric. Further, (4AMP)SnI 4 displays second harmonic generation (SHG) and polarization-electric field hysteresis measurements confirm it is ferroelectric with a spontaneous polarization of 10.0 µC cm −2 at room temperature. (4AMP)SnI 4 transitions into a centrosymmetric structure above 367 K. As the first direct experimental observation of the spontaneous ferroelectric polarization of a Sn-based 2D hybrid perovskite, this work opens up environmentally friendly 2D tin halide perovskites for ferroelectricity and other physical property studies.

2D↗

Copper Sensing in Alkaline Electrolyte Using Anodic Stripping Voltammetry by Means of a Lead Mediator

Anodic stripping voltammetry (ASV) is an analysis technique that permits the selective and quantitative analysis of metal ion species in solution. It is most commonly applied in neutral to acidic electrolyte largely due to inherent metal ion solubility. Bismuth (Bi) is a common film used for ASV due to its good sensitivity, overall stability and insensitivity to O2. ASV, utilizing a Bi film, along with cadmium (Cd) and lead (Pb) as the plating mediators, has recently been adapted to determine zinc (Zn) concentrations in highly alkaline environments (30 % NaOH or 35 % M KOH). Successful analysis of Zn in alkaline relies on the ability of the hydroxide to form soluble metal anion species, such as Bi(OH) 4 – and Zn(OH) 4 2– . Here, we look to extend this technique to detect and quantify copper (Cu) ions in these highly basic electrolytes. However, in general, the use of ASV to detect and quantify Cu ion concentrations is notoriously difficult as the Cu stripping peak potential overlays with that of Bi from the common Bi film electrode. Here, an ASV method for determining Cu concentration in alkaline solutions is developed utilizing Pb as a deposition mediator. As such, it was found that when analyzing Cu solutions in the presence of Pb, the stripping voltammetry curves present separate and defined Cu stripping peaks. Different analyzes were made to find the best stripping voltammetry performance conditions. As such, an accumulation time of 5 minutes, an accumulation potential of ≤–1.45 V vs. Hg/HgO, and a concentration of 35 wt% KOH were determined to be the conditions that presented the best ASV results. Utilizing these conditions, calibration curves in the presence of 5.0 ppm Pb showed the best linear stripping signal correlation with an r-squared value of 0.991 and a limit of detection (LOD) of 0.67 ppm. Lastly, these results give way to evaluating Cu concentrations using ASV in aqueous alkaline solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoscale properties of lead halide perovskites by scanning tunneling microscopy

Since the introduction of lead halide perovskites, tremendous progress has been made regarding their stability, reproducibility and durability. However, one of the issues that remains is related to the interfacial atomic structure arrangement and structure-property relationship under optical and electrical stimuli. In this critical review, we highlight the recent progress using scanning tunneling microscopy (STM) to understand the nanoscale properties and dynamic processes occurring in these halide perovskite materials. STM is known to be a very challenging technique, which is reflected by the low number of relevant publications in the last years. These initial reports mirror the unique potential of STM to give Ångstrom-scale insight into the (opto)-electronic properties, morphology and underlying electronic structure and provide a path toward harnessing the full potential of these materials. However, care must be taken to understand the effects of the perturbations caused by STM and tailor the measurement conditions accordingly.

36 MATERIALS SCIENCE↗

CONV-3D Code Application for CFD-Modeling of Lead-Bismuth Coolant

The results of testing the three-dimensional CFD-code on problems very close to real processes for lead–bismuth eutectic are presented: flow in a 19-fuel element assembly with three spacing lattices and convection in the ‘tumbler’ model. The results of convergence on a sequence of grids permit drawing the conclusion that for a 19-fuel element assembly the error in the calculation of the friction coefficient on a more finely divided grid does not exceed 10% with two-fold smaller grid step in each direction. Similar arguments are valid for the calculation of the hydraulic resistance coefficient.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Integrated data-driven and experimental approaches to accelerate lead optimization targeting SARS-CoV- 2 main protease

Identification of potential therapeutic candidates can be expedited by integrating computational modeling with domain aware machine learning (ML) approaches followed by experimental validation. Generative deep learning models have been recently developed that can generate thousands of new candidates, but their physiochemical properties are typically not optimized. Using our deep learning models and a scaffold as a starting point, we generated tens of thousands of compounds for SARS-CoV-2 M pro that preserve the core scaffold. Here we utilized and implemented several computational tools such as structural alert and toxicity analysis, high throughput virtual screening, ML-based 3D quantitative structure–activity relationships, multi-parameter optimization, and graph neural networks on libraries of generated candidates to predict biological activity and binding affinity a priori. From these collective computational results, eight promising candidates were identified and tested experimentally using Native Mass Spectrometry (MS) and FRET-based functional assays. Two compounds, with quinazoline-2-thiol and acetylpiperidine core moiety showed IC 50 values in the low micromolar range: 2.95±0.0017 µM and 3.41±0.0015 µM, respectively. The molecular dynamics simulations further highlight that binding of these compounds results in allosteric modulations in the chain B and the interface domains of the M pro . The key fragments from these top hits can be used as input for closed loop lead optimization in the integrated pipeline.

60 APPLIED LIFE SCIENCES↗

Extraction of gold, mercury and lead on CL resin in HCl

The uptake behavior of 197 mHg, 194 Au and 212 Pb in HCl on CL resin (Triskem) was studied. The extraction of mercury and gold is high (D w > 5,000) at all concentrations of HCl, with a maximum extraction of gold at 4 M HCl (D w ~ 53,000) and maximum extraction of mercury at 0.01 M HCl (D w ~ 44,000). Lead has moderate uptake on CL resin (D w ~ 100) from lower concentrations of HCl (0.001 to 0.05 M) and no uptake on the resin in concentrations ≥ 0.4 M. The uptake kinetics are similar for all three isotopes with high weight distribution ratios (>1,000 for 197 mHg, 194 Au and > 100 for 212 Pb) in ~ 30 s and equilibrium established at ~ 5 min. A column study was performed to demonstrate that 197m Hg, 194 Au and 212 Pb could be retained on CL resin in dilute HCl and 212 Pb eluted in 1 M HCl with no detectable 197m Hg or 194 Au. Elution of 197 mHg and 194 Au was performed with concentrated HNO 3 , but with significant losses to the column, particularly for 194 Au.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Photonics of 18-crown-6-containing styryl dye and its complex with cucurbit[7]uril in the presence of lead cation

The photophysical processes and photochemical reactions of 4-[(E)-2-(2,3,5,6,8,9,11,12,14,15-decahydro-1,4,7,10,13,16-benzohexaoxacyclooctadecyn-18-yl)vinyl]-1-ethylpyridinium perchlorate and its complexes with cucurbit[7]uril in water in the absence and in the presence of lead perchlorate were studied by absorption, luminescence, and laser kinetic spectroscopy. Intersystem crossing to the triplet state and trans—cis-photoisomerization of the dye were established. The formation of an inclusion complex of the dye with cucurbit[7]uril was found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure and Sn crystal orientation evolution in Sn-3.5Ag lead-free solders in high temperature packaging applications

Understanding the reliability of eutectic Sn-3.5Ag lead-free solders in high temperature packaging applications is of significant interest in power electronics for the next generation electric grid. Large area (2.5mm 2.5mm) Sn-3.5Ag solder joints between silicon dies and direct bonded copper substrates were thermally cycled between 5 C and 200 C. Sn crystal orientation and microstructure evolution during thermal cycling were characterized by electron backscatter diffraction (EBSD) in scanning electron microscope (SEM). Comparisons are made between observed initial texture and microstructure and its evolution during thermal cycling. Gradual lattice rotation and grain boundary misorientation evolution suggested the continuous recrystallization mechanism. Recrystallization behavior was correlated with dislocation slip activities.

high temperature packaging↗

Lead halide perovskite nanowires stabilized by block copolymers for Langmuir-Blodgett assembly

The rapid development of solar cells based on lead halide perovskites (LHPs) has prompted very active research activities in other closely-related fields. Colloidal nanostructures of such materials display superior optoelectronic properties. Especially, one-dimensional (1D) LHPs nanowires show anisotropic optical properties when they are highly oriented. However, the ionic nature makes them very sensitive to external environment, limiting their large scale practical applications. Here, we introduce an amphiphilic block copolymer, polystyrene-block-poly(4-vinylpyridine) (PS-P4VP), to chemically modify the surface of colloidal CsPbBr 3 nanowires. Finally, the resulting core-shell nanowires show enhanced photoluminescent emission and good colloidal stability against water. Taking advantage of the stability enhancement, we further applied a modified Langmuir-Blodgett technique to assemble monolayers of highly aligned nanowires, and studied their anisotropic optical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗