Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Field Operators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

The electrodynamic and hydrodynamic phenomena in magnetically-levitated molten droplets. II - Transient behavior and heat transfer considerations

Computed results are presented describing the transient evolution of the velocity and the temperature fields in a levitation-melted, electromagnetically-positioned metallic sample under microgravity, for conditions, when the heating current is switched off. Thus the calculations trace the evolution from one steady state corresponding to the simultaneous operation of both the heating and the positioning coils to that corresponding to the operation of the positioning coils only. The calculations have shown that the velocity field will decay much more rapidly than the temperature field, so that the cooling and subsequent undercooling and recalescence of the samples should take place from an essentially stagnant melt, meeting the original objectives of the experiment. The computed results for the velocity decay appear to agree with asymptotic calculations and also appear to follow the scaling laws.

Zong, Jin-Ho↗

FIDO Field Trials in Preparation for Mars Rover Exploration and Discovery and Sample Return Missions

The Mars 2003 Mission may include a rover to acquire remote sensing and in-situ measurements of surface materials, including rock surfaces that have been cleared of dust and coatings by use of an abrasion tool. Mars Sample Return Missions for 2005 and beyond may include rovers with remote sensing and in-situ measurement capabilities. Further, these mobility platforms may have systems to drill into rocks and collect cores, acquire soil samples, and place the rock and soil samples in ascent vehicles. The point of this abstract is to document that these operations have already been shown to be tractable based on continuing field trials of the FIDO Mars prototype rover.

Arvidson, R. E.↗

Development and utilization of a laser velocimeter system for a large transonic wind tunnel

The need for measurements of the velocity flow field about spinner propeller nacelle configurations at Mach numbers to 0.8 was met by a specially developed laser velocimeter system. This system, which uses an argon ion laser and 4 beam 2 color optics, was required to operate in the hostile environment associated with the operation of a large transonic wind tunnel. To overcome the conditions present in locating the sensitive optics in close proximity to the wind tunnel, an isolation system was developed. The system protects the velocimeter from the high vibrations, elevated temperatures, destructive acoustic pressures and low atmospheric pressures attendant with the operation of the wind tunnel. The system was utilized to map the flow field in front of, behind and in between the rotating blades of an advanced swept blade propeller model at a Mach number of 0.8. The data collected by the system will be used to correlate and verify computer analyses of propeller nacelle flow fields and propeller performance.

Freedman, R. J.↗

Imaging large- and small-scale structures of the far ultraviolet background with the FAUST instrument

The FAUST telescope is an ultraviolet survey instrument that features a wide 8 deg field of view, 1-arcmin angular resolution, and a photon counting detector. Operating in the 1400-1800 A band, it will be sufficiently sensitive to detect blue m(v) = 17 objects in a single 20-minute night. The instrument is part of the ATLAS-1 shuttle mission, presently scheduled for flight in May 1991. A substantial number of high galactic latitude fields will be investigated, with particular emphasis on studies of the origin of the diffuse far UV background.

Lampton, M.↗

Spaceflight Medical Evacuation Risk Assessment Principles - A Qualitative Investigation

BACKGROUND Future human space exploration beyond Low Earth Orbit (LEO) will require innovative solutions in many areas, primarily those that provide direct medical support to crew on long-duration missions and optimize their health and performance. The associated challenges therein will be numerous, including but not necessarily limited to extended one-way or "asynchronous" communication delays, minimal to non-existent resupply, and a prolonged transit time to "definitive care" ranging from 3-days to 9-months. At the same time, long-duration exploration spacecraft and crew will face restrictions on mass, power, volume, and data far more significant than that seen in current LEO settings. Given these limitations, medical risk assessment is of primary importance, especially evaluating the implications of a medical evacuation of an ill or injured crewmember. Such evacuations are complicated, potentially dangerous, and well may be impossible in certain phases of the mission. Regardless, such issues must be weighed against the risks of the injured crew remaining aboard a spacecraft with limited medical resources. OBJECTIVE This qualitative study drew from the experiences of subject matter experts (SMEs) in spaceflight and appropriate analog environments (i.e., military, disaster, and extreme environment fields) to identify unique principles common amongst medical evacuation considerations helpful in informing future risk assessment tools. Appropriate analog environments included austere operational settings where multiple factors (weather, logistics/limited resupply, denied/extreme environments, and patient condition) resulted in a limited ability to provide definitive local medical care. The fundamental principles in question revolved around scenarios where evacuation became a complicating yet necessary consideration and where life-threatening medical concerns had to be weighed against critical mission objective(s). The primary authors collected semi-structured data gathered through in-depth interviews with 16 subject matter experts (SMEs). Interview questions investigated how these SMEs consider and weigh the attendant risks present in medical evacuation scenarios. Among the critical questions posed were those that sought to understand how the SME balanced the challenges and requirements of medical evacuation (or keeping an injured patient "on-site" aka: "prolonged field care") against the evacuation operation's risks on impacting overarching mission success. The team analyzed interview transcripts for common themes and principles using the qualitative methods of thematic analysis based on consensus, co-occurrence, and comparison. As a result, nine primary risk consideration themes and nine contributing factor themes emerged, all of which will ideally inform future medical evacuation decision-making tools and operational decision-making for exploration class missions. Specific aims for this study included: 1. Identification of common principles used to assess risks and benefits of medical evacuations in extreme environments 2. Identification of common points of friction or complication and challenges in extreme environment evacuations

A T Almand↗

Towards Inner Magnetosphere Particle and Field Models

We report on the initial stages of an effort to construct comprehensive empirical models of the plasma and fields in the inner magnetosphere. The models are based not only on archival data (e.g., SCATHA) but also on current spacecraft mission data (e.g., POLAR). In this component of the effort, we incorporate the recently archived data provided by the SCATRA (Spacecraft Charging AT High Altitude) satellite. The SCAT14A satellite was in a near-geostationary orbit and was in operation for more than a decade. In this paper, we focus on the SCATRA plasma and magnetic field data from approximately the first two years of operation. The time-series data are binned according to spatial location and geomagnetic activity. Examples of statistical, empirical models from this initial effort are presented; even the simply-constructed preliminary models reveal such subtle features as the previously reported warm (greater than 100 eV) plasma density enhancement near the magnetic equator.

Spence, H. E.↗

Magnetic field studies at Jupiter by Voyager 2 - Preliminary results

The Voyager 2 magnetic field experiment, for which the instrumentation is identical to that on Voyager 1, operated flawlessly throughout the second Jupiter encounter. The paper presents a brief overview of the results obtained to date on the Jovian magnetosphere, the bow shock, the magnetopause, and the extended magnetic tail. The results and the magnetic field geometry confirm the earlier conclusion from Voyager 1 that Jupiter has an enormous magnetic tail, approximately 300-400 Jupiter radii in diameter, trailing behind the planet with respect to the supersonic flow of the solar wind. Additional observations of the distortion of the inner magnetosphere by a concentrated plasma show a spatial merging of the equatorial magnetodisk current with the current sheet in the magnetic tail. Disturbances near Ganymede are discussed.

Ness, N. F.↗

A Three-Dimensional Linearized Unsteady Euler Analysis for Turbomachinery Blade Rows

A three-dimensional, linearized, Euler analysis is being developed to provide an efficient unsteady aerodynamic analysis that can be used to predict the aeroelastic and aeroacoustic responses of axial-flow turbo-machinery blading.The field equations and boundary conditions needed to describe nonlinear and linearized inviscid unsteady flows through a blade row operating within a cylindrical annular duct are presented. A numerical model for linearized inviscid unsteady flows, which couples a near-field, implicit, wave-split, finite volume analysis to a far-field eigenanalysis, is also described. The linearized aerodynamic and numerical models have been implemented into a three-dimensional linearized unsteady flow code, called LINFLUX. This code has been applied to selected, benchmark, unsteady, subsonic flows to establish its accuracy and to demonstrate its current capabilities. The unsteady flows considered, have been chosen to allow convenient comparisons between the LINFLUX results and those of well-known, two-dimensional, unsteady flow codes. Detailed numerical results for a helical fan and a three-dimensional version of the 10th Standard Cascade indicate that important progress has been made towards the development of a reliable and useful, three-dimensional, prediction capability that can be used in aeroelastic and aeroacoustic design studies.

Montgomery, Matthew D.↗

Underway Sampling of Marine Inherent Optical Properties on the Tara Oceans Expedition as a Novel Resource for Ocean Color Satellite Data Product Validation

Developing and validating data records from operational ocean color satellite instruments requires substantial volumes of high quality in situ data. In the absence of broad, institutionally supported field programs, organizations such as the NASA Ocean Biology Processing Group seek opportunistic datasets for use in their operational satellite calibration and validation activities. The publicly available, global biogeochemical dataset collected as part of the two and a half year Tara Oceans expedition provides one such opportunity. We showed how the inline measurements of hyperspectral absorption and attenuation coefficients collected onboard the R/V Tara can be used to evaluate near-surface estimates of chlorophyll-a, spectral particulate backscattering coefficients, particulate organic carbon, and particle size classes derived from the NASA Moderate Resolution Imaging Spectroradiometer onboard Aqua (MODISA). The predominant strength of such flow-through measurements is their sampling rate-the 375 days of measurements resulted in 165 viable MODISA-to-in situ match-ups, compared to 13 from discrete water sampling. While the need to apply bio-optical models to estimate biogeochemical quantities of interest from spectroscopy remains a weakness, we demonstrated how discrete samples can be used in combination with flow-through measurements to create data records of sufficient quality to conduct first order evaluations of satellite-derived data products. Given an emerging agency desire to rapidly evaluate new satellite missions, our results have significant implications on how calibration and validation teams for these missions will be constructed.

remote sensing↗

Supporting Exploration Missions by Enabling Exploration Mission System Software

Future exploration missions will consist of a multitude of data sources, systems, and operators collaborating to complete mission objectives. Presently, NASA is instantiating the contractual mechanisms, such as the xEVAS and HLS contracts, to produce these mission assets. Architectural planning is also underway to establish the networking protocols and infrastructure to digitally create and connect mission elements, such as LunaNET. However, without new horizontally integrated data systems, these advancements will be limited in their ability to get mission data appropriately integrated into the plan, train, fly, explore workflow of the operations workforce. Here we describe several mission system software development efforts underway that are designed to support human spaceflight missions. We describe the current iterations of a suite of tools to support EVA procedure authoring and execution, for both ISS and Artemis missions, as well as a software solution to establish and interact with mission context and data products. These tools have been developed iteratively and continue to be tested in several NASA facilities such as the Neutral Buoyancy Lab (NBL), Artemis field testing, and in present-day International Space Station (ISS) operations on orbit. Our solutions demonstrate how software development can be aligned with ongoing operations development activities to discover the features that best support future human spaceflight missions.

EVA Mission System Software↗

Design and Field Test of a Mass Efficient Crane for Lunar Payload Handling and Inspection: The Lunar Surface Manipulation System

Devices for lifting, translating and precisely placing payloads are critical for efficient Earthbased construction operations. Both recent and past studies have demonstrated that devices with similar functionality will be needed to support lunar outpost operations. Lunar payloads include: a) prepackaged hardware and supplies which must be unloaded from landers and then accurately located at their operational site, b) sensor packages used for periodic inspection of landers, habitat surfaces, etc., and c) local materials such as regolith which require grading, excavation and placement. Although several designs have been developed for Earth based applications, these devices lack unique design characteristics necessary for transport to and use on the harsh lunar surface. These design characteristics include: a) composite components, b) compact packaging for launch, c) simple in-field reconfiguration and repair, and d) support for tele-operated or automated operations. Also, in contrast to Earth-based construction, where special purpose devices dominate a construction site, a lunar outpost will require versatile devices which provide operational benefit from initial construction through sustained operations. This paper will detail the design of a unique, high performance, versatile lifting device designed for operations on the lunar surface. The device is called the Lunar Surface Manipulation System to highlight the versatile nature of the device which supports conventional cable suspended crane operations as well as operations usually associated with a manipulator such as precise positioning where the payload is rigidly grappled by a tool attached to the tip of the device. A first generation test-bed to verify design methods and operational procedures is under development at the NASA Langley Research Center and recently completed field tests at Moses Lake Washington. The design relied on non-linear finite element analysis which is shown to correlate favorably with laboratory experiments. A key design objective, reviewed in this paper, is the device s simplicity, resulting from a focus on the minimum set of functions necessary to perform payload offload. Further development of the device has the potential for significant mass savings, with a high performance device incorporating composite elements estimated to have a mass less than 3% of the mass of the maximum lunar payload lifted at the tip. The paper will conclude with future plans for expanding the operational versatility of the device.

Doggett, William R.↗

Virtual Reality Robotic Operation Simulations Using MEMICA Haptic System

There is an increasing realization that some tasks can be performed significantly better by humans than robots but, due to associated hazards, distance, etc., only a robot can be employed. Telemedicine is one area where remotely controlled robots can have a major impact by providing urgent care at remote sites. In recent years, remotely controlled robotics has been greatly advanced. The robotic astronaut, "Robonaut," at NASA Johnson Space Center is one such example. Unfortunately, due to the unavailability of force and tactile feedback capability the operator must determine the required action using only visual feedback from the remote site, which limits the tasks that Robonaut can perform. There is a great need for dexterous, fast, accurate teleoperated robots with the operator?s ability to "feel" the environment at the robot's field. Recently, we conceived a haptic mechanism called MEMICA (Remote MEchanical MIrroring using Controlled stiffness and Actuators) that can enable the design of high dexterity, rapid response, and large workspace system. Our team is developing novel MEMICA gloves and virtual reality models to allow the simulation of telesurgery and other applications. The MEMICA gloves are designed to have a high dexterity, rapid response, and large workspace and intuitively mirror the conditions at a virtual site where a robot is simulating the presence of the human operator. The key components of MEMICA are miniature electrically controlled stiffness (ECS) elements and Electrically Controlled Force and Stiffness (ECFS) actuators that are based on the sue of Electro-Rheological Fluids (ERF). In this paper the design of the MEMICA system and initial experimental results are presented.

NDE NDT composite materials defects inspection↗

Motion-Base Simulator Evaluation of an Aircraft Using an External Vision System

Twelve air transport-rated pilots participated as subjects in a motion-base simulation experiment to evaluate the use of eXternal Vision Systems (XVS) as enabling technologies for future supersonic aircraft without forward facing windows. Three head-up flight display concepts were evaluated -a monochromatic, collimated Head-up Display (HUD) and a color, non-collimated XVS display with a field-of-view (FOV) equal to and also, one significantly larger than the collimated HUD. Approach, landing, departure, and surface operations were conducted. Additionally, the apparent angle-of-attack (AOA) was varied (high/low) to investigate the vertical field-of-view display requirements and peripheral, side window visibility was experimentally varied. The data showed that lateral approach tracking performance and lateral landing position were excellent regardless of AOA, display FOV, display collimation or whether peripheral cues were present. However, the data showed glide slope approach tracking appears to be affected by display size (i.e., FOV) and collimation. The monochrome, collimated HUD and color, uncollimated XVS with Full FOV display had (statistically equivalent) glide path performance improvements over the XVS with HUD FOV display. Approach path performance results indicated that collimation may not be a requirement for an XVS display if the XVS display is large enough and employs color. Subjective assessments of mental workload and situation awareness also indicated that an uncollimated XVS display may be feasible. Motion cueing appears to have improved localizer tracking and touchdown sink rate across all displays.

Kramer, Lynda J.↗

Remote Sensing of Wind Fields and Aerosol Distribution with Airborne Scanning Doppler Lidar

The coherent Doppler laser radar (lidar), when operated from an airborne platform, is a unique tool for the study of atmospheric and surface processes and features. This is especially true for scientific objectives requiring measurements in optically-clear air, where other remote sensing technologies such as Doppler radar are typically at a disadvantage. The atmospheric lidar remote sensing groups of several US institutions, led by Marshall Space Flight Center, have developed an airborne coherent Doppler lidar capable of mapping the wind field and aerosol structure in three dimensions. The instrument consists of an eye-safe approx. 1 Joule/pulse lidar transceiver, telescope, scanner, inertial measurement unit, and flight computer system to orchestrate all subsystem functions and tasks. The scanner is capable of directing the expanded lidar beam in a variety of ways, in order to extract vertically-resolved wind fields. Horizontal resolution is approx. 1 km; vertical resolution is even finer. Winds are obtained by measuring backscattered, Doppler-shifted laser radiation from naturally-occurring aerosol particles (of order 1 micron diameter). Measurement coverage depends on aerosol spatial distribution and composition. Velocity accuracy has been verified to be approx. 1 meter per second. A variety of applications have been demonstrated during the three flight campaigns conducted during 1995-1998. Examples will be shown during the presentation. In 1995, boundary layer winds over the ocean were mapped with unprecedented resolution. In 1996, unique measurements were made of. flow over the complex terrain of the Aleutian Islands; interaction of the marine boundary layer jet with the California coastal mountain range; a weak dry line in Texas - New Mexico; the angular dependence of sea surface scattering; and in-flight radiometric calibration using the surface of White Sands National Monument. In 1998, the first measurements of eyewall and boundary layer winds within a hurricane were made with the airborne Doppler lidar. Potential applications and plans for improvement will also be described.

Rothermel, Jeffry↗

OP09O-OP404-9 Wide Field Camera 3 CCD Quantum Efficiency Hysteresis

The HST/Wide Field Camera (WFC) 3 UV/visible channel CCD detectors have exhibited an unanticipated quantum efficiency hysteresis (QEH) behavior. At the nominal operating temperature of -83C, the QEH feature contrast was typically 0.1-0.2% or less. The behavior was replicated using flight spare detectors. A visible light flat-field (540nm) with a several times full-well signal level can pin the detectors at both optical (600nm) and near-UV (230nm) wavelengths, suppressing the QEH behavior. We are characterizing the timescale for the detectors to become unpinned and developing a protocol for flashing the WFC3 CCDs with the instrument's internal calibration system in flight. The HST/Wide Field Camera 3 UV/visible channel CCD detectors have exhibited an unanticipated quantum efficiency hysteresis (QEH) behavior. The first observed manifestation of QEH was the presence in a small percentage of flat-field images of a bowtie-shaped contrast that spanned the width of each chip. At the nominal operating temperature of -83C, the contrast observed for this feature was typically 0.1-0.2% or less, though at warmer temperatures contrasts up to 5% (at -50C) have been observed. The bowtie morphology was replicated using flight spare detectors in tests at the GSFC Detector Characterization Laboratory by power cycling the detector while cold. Continued investigation revealed that a clearly-related global QE suppression at the approximately 5% level can be produced by cooling the detector in the dark; subsequent flat-field exposures at a constant illumination show asymptotically increasing response. This QE "pinning" can be achieved with a single high signal flat-field or a series of lower signal flats; a visible light (500-580nm) flat-field with a signal level of several hundred thousand electrons per pixel is sufficient for QE pinning at both optical (600nm) and near-UV (230nm) wavelengths. We are characterizing the timescale for the detectors to become unpinned and developing a protocol for flashing the WFC3 CCDs with the instrument's internal calibration system in flight. A preliminary estimate of the decay timescale for one detector is that a drop of 0.1-0.2% occurs over a ten day period, indicating that relatively infrequent cal lamp exposures can mitigate the behavior to extremely low levels.

Collins, Nick↗

The Antarctic Search for Meteorites: A Model for Deep Space Exploration

In an era of shrinking buying power and reduced flight opportunities, NASA must extract the greatest possible value from all sources of insight into the future of human space exploration. Antarctica is one such source. The history of Antarctic exploration has many political and technical parallels with the development of space, and Antarctica's remoteness and harsh climate make it an excellent proxy for space (e.g., [1,2]). Links between exploration of space and of the Antarctic date back to the International Geophysical Year of 1957-1958, which saw both the launch of Sputnik 1 and the establishment of a station at the South Pole. The Antarctic Search for Meteorites (ANSMET) is an annual expedition to the south polar plateau to collect meteorites. Although its intent is not to simulate a space mission, the handful of astronauts who have participated in ANSMET agree that it is very similar to a long-duration space flight. Independently, NASA and other space agencies have simulated deep space exploration missions in "analog" activities at remote field sites on Earth (e.g., [3]). These include NASA Extreme Environment Mission Operations (NEEMO) [4,5], Desert Research And Technology Studies (Desert RATS) [6,7], and the Pavilion Lake Research Project (PLRP or simply Pavilion Lake) [8]. This report focuses on NEEMO, Desert RATS, and PLRP because of the author's firsthand experience with them. Other noteworthy analogs, such as the arctic Haughton Mars Project and the European Space Agency's underground Cooperative Adventure for Valuing and Exercising human behavior and performance Skills (CAVES), are not treated here. NASA analogs often include fully staffed control centers, astronauts serving as crew, and realistic mission timelines lasting one to two weeks. Analogs have provided key insights into system architectures and operational concepts for the future human exploration of deep space. They have pioneered techniques for human communication with significant speed-of-light delays, for conducting spacewalks on natural objects with negligible surface gravity, and for empowering exploration crews to work with reduced dependence on a ground control center. They have field-tested dozens of emerging technologies including spacewalking tools and full-scale prototype vehicles and habitats. They have provided valuable experience for astronauts preparing for their first space flight, and for flown crewmembers who will take command roles on later flights. Some analogs, especially PLRP, have connected observers in the field with science teams in remotely located control centers to produce high-quality, publishable scientific results. The analogs have accomplished all of this at a tiny fraction of the cost of an actual space flight. This report treats ANSMET as space flight analog. The chapter following this introduction describes ANSMET in depth. The report then presents data on logistics and crew considerations that may be useful for developers of future human space exploration missions. It offers detailed comparisons between ANSMET and past, present, and future space flights on the Space Shuttle, the International Space Station (ISS), and a proposed Mars mission. Those comparisons are intended to complement the work of Eppler [2], who compares ANSMET to the Apollo moon flights. This report also compares ANSMET with the Desert RATS, NEEMO, and PLRP analogs. It then presents observations and makes recommendations related to ANSMET's value as a simulated space mission. The report ends with a short conclusion. The remainder of this introductory chapter provides background material to help readers interpret the rest of the report. It gives brief overviews of Space Shuttle and ISS missions along with information on a notional future human flight to Mars. It also presents the general features of three of NASA's space flight "analog" projects. With those points of reference in place, the chapter concludes with an overview of ANSMET.

Love, Stanley G.↗

The HEAO 3 gamma-ray spectrometer

The third High Energy Astronomy Observatory (HEAO 3), successfully launched into low earth orbit on September 20, 1979, carries a large high-resolution gamma-ray spectrometer designed for cosmic nuclear spectroscopy. This gamma-ray spectrometer (the HEAO C-1 experiment) consists of a cluster of four coaxial high-purity germanium detectors, each with a volume of approximately 100 cu cm. Surrounding the germanium detectors is a 6.6-cm thick CsI shield operating in active anticoincidence with the central detectors and defining a field of view of about 30 deg FWHM. An initial energy resolution of 3 keV FWHM at 1.46 MeV was achieved for each detector. All valid events in the germanium detectors are individually analyzed by an 8192-channel pulse area analyzer and transmitted at a maximum rate of 15.6 evens/s for each detector. During a 6-month mission, the experiment will perform a complete sky survey for narrow cosmic gamma-ray line emission to the sensitivity level of about 0.0001 photons/sq cm s over an operating energy range of 0.05-10 MeV.

Mahoney, W. A.↗

Performance optimization of an MHD generator with physical constraints

A technique has been described which optimizes the power out of a Faraday MHD generator operating under a prescribed set of electrical and magnetic constraints. The method does not rely on complicated numerical optimization techniques. Instead the magnetic field and the electrical loading are adjusted at each streamwise location such that the resultant generator design operates at the most limiting of the cited stress levels. The simplicity of the procedure makes it ideal for optimizing generator designs for system analysis studies of power plants. The resultant locally optimum channel designs are, however, not necessarily the global optimum designs. The results of generator performance calculations are presented for an approximately 2000 MWe size plant. The difference between the maximum power generator design and the optimal design which maximizes net MHD power are described. The sensitivity of the generator performance to the various operational parameters are also presented.

Pian, C. C. P.↗