SEARCH · Engineering Papers

Results for “FOILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88

All sources NASA NTRS DOE OSTI

NASA NTRS1989

The effect of composition and cooling rate on the structure of rapidly solidified (Fe, Ni)3Al-C alloy

The quench rate-metastable structure dependence in the Fe-20Ni-8Al-2C wt pct alloy has been experimentally studied. The nonequilibrium gamma-prime and gamma phases were noted in foils 65-100 microns thick, while at higher quench rates (thinner samples) the matrix was found to be in a disordered fcc gamma phase with kappa carbide precipitates. With the addition of silicon to the alloys, the nonequilibrium gamma-prime and gamma structures are observed at higher cooling rates.

Myers, S. A.↗

NASA NTRS1989

On the orthorhombic phase in ZrO2-based alloys

During TEM observation, a tetragonal (t) to orthorhombic (o) phase transformation often occurs in thin portions of ZrO2-containing foils. This transformation is stress-induced and in some senses artifactual, in that the reaction product is actually a high-pressure phase, relative to monoclinic (m) ZrO2, that can form from metastable t-ZrO2 in the TEM because its density is intermediate between t- and m-ZrO2. Examples of the formation of o-ZrO2 in a number of different systems are given.

Heuer, A. H.↗

NASA NTRS1988

The abundances of elements and isotopes in the solar wind

Studies of the chemical and isotopic composition of the solar wind are reviewed. Solar wind abundance measurements are discussed and solar wind, coronal, and photospheric abundances for elements between H and Fe are presented. Also, consideration is given to the determination of the solar wind isotopic composition of the noble gases using foil collection techniques and the observation of solar wind heavy ions with the mass per charge spectrometer on ISEE-3. Other topics include solar wind observations with solid state detectors, solar wind abundances in the magnetosheath and the plasma sheet, and high-mass resolution measurements of chemical elements and isotopes in the solar wind.

Gloeckler, George↗

NASA NTRS1989

X-ray metal film filters at cryogenic temperatures

Thin aluminum foil filters have been evaluated at cryogenic temperatures. The results of the test program, including cold cycling and vibration testing, indicate that these filters are fully successful at cryogenic temperatures and can provide the high X-ray transmittance and high background rejection required for the blocking filters which are being developed for the X-Ray Spectrometer, one of the focal plane instruments on the Advanced X-Ray Astrophysics Facility.

Keski-Kuha, Ritva A. M.↗

NASA NTRS1989

Measurements of oscillator strengths for EUV emissions of ionized oxygen, nitrogen and sulfur

Oscillator-strength determinations for EUV branching emissions of atomic oxygen, nitrogen and sulfur are reported. The transitions studied were excited using a beam-foil source and both branching ratios and radiative lifetimes were determined. Calculated transition-probability data for multiply-ionized neon and oxygen emissions were used to obtain an in situ relative sensitivity curve for the EUV detection system used. New oscillator strengths for NII, OII, SII, and SIII EUV branching emissions that terminate on metastable states of the respective ions are reported, together with new lifetime data for ionized sulfur emissions.

Ryan, L. J.↗

NASA NTRS1990

The experimental evaluation and application of high-temperature solid lubricants

A research program is described which developes an understanding of high-temperature solid lubrication and experimental techniques through the development of a composite lubricant coating system. The knowledge gained through this research was then applied to a specific engineering challenge, the tribology of a sliding seal for hypersonic flight vehicles. The solid lubricant coating is a chromium carbide based composite combined with silver, which acts as a low temperature lubricant, and barium fluoride/calcium fluoride eutectic, which acts as a high-temperature lubricant. This composite coating provides good wear resistance and low friction for sliding contacts from room temperature to over 900 C in reducing or oxidative environments. The specific research on this coating included a composition screening using a foil gas bearing test rig and the use of thin silver films to reduce initial wear using a pin-on-disk test rig. The chemical stability of the materials used was also addressed. This research indicated that soft metallic films and materials which become soft at elevated temperatures are potentially good lubricants. The general results from the experiments with the model solid lubricant coating were then applied to a sliding seal design concept. This seal design requires that a braided ceramic fabric slide against a variety of metal counterface materials at temperatures from 25 to 850 C in an oxidative environment. A pin-on-disk tribometer was used to evaluate the tribological properties of these materials and to develop lubrication techniques. The results indicate that these seal materials must be lubricated to prevent wear and reduce friction. Thin films of silver, gold and calcium fluoride provided lubrication to the sliding materials.

Dellacorte, Christopher↗

NASA NTRS1990

The sensitivity of EGRET to gamma ray polarization

A Monte Carlo simulation shows that EGRET (Energetic Gamma-Ray Experimental Telescope) does not even have sufficient sensitivity to detect 100 percent polarized gamma-rays. This is confirmed by analysis of calibration data. A Monte Carlo study shows that the sensitivity of EGRET to polarization peaks around 100 MeV. However, more than 10 (exp 5) gamma-ray events with 100 percent polarization would be required for a 3 sigma significance detection - more than available from calibration, and probably more than will result from a single score source during flight. A drift chamber gamma ray telescope under development (Hunter and Cuddapah 1989) will offer better sensitivity to polarization. The lateral position uncertainty will be improved by an order of magnitude. Also, if pair production occurs in the drift chamber gas (xenon at 2 bar) instead of tantalum foils, the effects of multiple Coulomb scattering will be reduced.

Mattox, John R.↗

NASA NTRS1990

Carbon-rich particles in Comet Halley

The majority of particles detected in the coma of Comet Halley contain carbon atoms; many of these grains appear to consist preponderately or only of light elements. These light-element particles may be composed of organic compounds. Of the possible combinations of the elements hydrogen, carbon, nitrogen, and oxygen, numerous examples are found of particles containing the combinations (H,C,O,N), (H,C,N), (H,C,O), and (H,C). These results may bear on the recent detection of polyoxymethylene fragments, the observation of cyanojets (CN patterns consistent with release from solid particles), the possible presence of cyanopolyacetylenes or HCN polymer and the make-up of the CHON particles. If cometary matter could reach the surface of the earth without complete disruption, these diverse organic and mixed particles could create unique microenvironments, possibly with significant or even pivotal prebiotic chemical activity. Here a speculative insight into possible relationships between carbon in comets and carbon in life is given, as well as a brief overview of on-going analysis of data from the highly successful Particle Impact Analyzer (PIA) experiment flown on the Giotto spacecraft for the flyby of Comet Halley (development and implementation of PIA was under the direction of J. Kissel of the Max Planck Institute for Kernphysik, Heidelberg). PIA is a time-of-flight analyzer which obtains mass spectra of ions from individual particles impacting on a Pt-Ag foil target within the instrument.

Clark, Benton C.↗

NASA NTRS1990

Heavy Nucleus Collector (HNC) project for the NASA Long Duration Exposure Facility (LDEF)

The primary goal of the heavy nucleus collector (HNC) experiment was to obtain high resolution composition measurements for cosmic ray nuclei in the platinum-lead and actinide region of the periodic table. Secondary objectives include studies of selected groups of elements of lower charge. These goals were to be realized by orbiting a large area array of dielectric nuclear track detectors in space for several years. In this time sufficient actinide nuclei would be collected to determine the nucleosynthetic age of the cosmic radiation and the relative mix of r- and s-process elements in the cosmic ray source. The detector consists of approximately 50 trays assembled in pressurized canisters. Each tray would contain 8 half-stacks (4 stacks total) and an event thermometer which would record the temperature of each event at the time of exposure. Each stack would contain 7 layers of Rodyne-P, CR-39 and Cronar plastic track detectors interleaved with copper stripping foils. Upon return to Earth, detectors would be removed for analysis. Ultraheavy nuclei would have left tracks through the detector sheets that would be made visible after etching in a hot sodium hydroxide solution.

Tarle, Gregory↗

NASA NTRS1989

The effect of anti-phase domain size on the ductility of a rapidly solidified Ni3Al-Cr alloy

Tensile tests on splat-quenched Ni3Al-Cr alloys showed a sharp decrease in ductility with long-time annealing. The growth of the initially very-fine-size anti-phase domains showed a tenuous correlation with ductility up to a critical size, where ductility was lost. The grain size was relatively unaffected by these annealing treatments, but the grain-boundary curvature decreased, implying less toughness. An important observation was that, for the longest annealing time, a chromium-rich precipitate formed, which the data indicate could be a boride. Miniaturized tensile tests were performed on samples which were all obtained from the same splat-quenched foil, and the various domain sizes were controlled by subsequent annealing treatments.

Carro, G.↗

NASA NTRS1989

Some composite bearing and seal materials for gas turbine applications - A review

A review is made of the selection and tribological testing of materials for high-temperature bearings and seals. The goal is to achieve good tribological properties over a wide range of temperatures because bearings and seals must be functional from low temperature start-up conditions on up to the maximum temperatures encountered during engine operation. Plasma sprayed composite coatings with favorable tribological properties from 25 to 900 C are discussed. The performance of these coatings in simple tribological bench tests is described. Examples are also given of their performance in high-speed sliding contact seals and as Stirling cylinder liner materials, and as backup lubricants for compliant foil gas bearings.

Sliney, Harold E.↗

NASA NTRS1989

Experimental determination of stator endwall heat transfer

Local Stanton numbers were experimentally determined for the endwall surface of a turbine vane possage. A six vane linear cascade having vanes with an axial chord of 13.81 cm was used. Resutls were obtained for Reynolds numbers based on inlet velocity and axial chord between 75,000 and 495,000. The test section was connected to a low pressure exhaust system. Ambient air was drawn into the test section, inlet velocity was controlled up to a maximum of 59.4 m/sec. The effect of the inlet boundary layer thickness on the endwall heat transfer was determined for a range of test section flow rates. The liquid crystal measurement technique was used to measure heat transfer. Endwall heat transfer was determined by applying electrical power to a foil heater attached to the cascade endwall. The temperature at which the liquid crystal exhibited a specific color was known from a calibration test. Lines showing this specific color were isotherms, and because of uniform heat generation they were also lines of nearly constant heat transfer. Endwall static pressures were measured, along with surveys of total pressure and flow angles at the inlet and exit of the cascade.

Boyle, Robert J.↗

NASA NTRS1990

Results from returned spacecraft surfaces

Meteoroid and space debris impact data obtained from space exposed spacecraft parts or meteoroid experiments is analyzed. The returned space exposed surfaces considered include spacecraft windows, meteoroid experiments exposed on space flights, and samples of opportunity such as foil wrapped around a cosmic ray package. The debris flux is found to exceed the meteoroid flux in creating impact craters smaller than 20 microns in diameter, and may again exceed it for impact structures larger than a few mm in diameter. For impact structures between 100 microns and 1 mm in diameter, the debris flux is found to be several times less than the meteoroid flux. Determining more accurately the meteoroid or orbital debris mass that makes a given crater or hole size remains is considered to be the main remaining problem.

Zook, Herbert A.↗

NASA NTRS1990

Isothermal and nonisothermal fatigue behavior of a metal matrix composite

The isothermal and nonisothermal fatigue resistance of a metal matrix composite (MMC) consisting of Ti-15V-3Cr-3Al-3Sn (Ti-15-3) matrix reinforced by 33 vol pct continuous SiC fibers was investigated. The fibers were nominally oriented parallel to the specimen axis. Isothermal fatigue tests were performed in air at 300 and 550 C. The MMC had good isothermal fatigue resistance at low cyclic stress, with fatigue cracks initiating from fiber-matrix interfaces and foil laminations. At high cyclic stresses, stress relaxation in the matrix reduced isothermal composite fatigue resistance at 550 C. Nonisothermal fatigue loading substantially degraded composite fatigue resistnce. This degradation was produced by a thermomechanical fatigue damage mechanism associated with the fiber-matrix interfaces.

Gabb, T. P.↗

NASA NTRS1990

Filters for soft X-ray solar telescopes

Soft X-ray telescopes require filters that block visible and infrared light and have good soft X-ray transmission. The optical properties of possible materials are discussed, and the fabrication and testing methods for the filters used in a 10-inch normal incidence telescope for 63 A are described. The best performances in the 44-114-A wavelength range are obtained with foils of carbon and rhodium.

Spiller, Eberhard↗

NASA NTRS1990

Review of grazing incidence optics fabrication techniques for X-ray astronomy

This paper covers the various techniques that are currently being used and developed to fabricate grazing incidence X-ray optics for the energy range from about 0.2 to 20 keV. Techniques covered will include diamond turning, thin foils, epoxy/carbon-fiber replication, electroforming replication, and float glass/Kirkpatrick-Baez techniques.

Ulmer, Melville P.↗

NASA NTRS1990

Space-based measurements of elemental abundances and their relation to solar abundances

The Ion Composition Instrument (ICI) aboard the ISEE-3/ICE spacecraft was in the solar wind continuously from August 1978 to December 1982. The results made it possible to establish long-term average solar wind abundance values for helium, oxygen, neon, silicon, and iron. The Charge-Energy-Mass instrument aboard the CCE spacecraft of the AMPTE mission has measured the abundance of these elements in the magnetosheath and has also added carbon, nitrogen, magnesium, and sulfur to the list. There is strong evidence that these magnetosheath abundances are representative of the solar wind. Other sources of solar wind abundances are Solar Energetic Particle experiments and Apollo lunar foils. When comparing the abundances from all of these sources with photospheric abundances, it is clear that helium is depleted in the solar wind while silicon and iron are enhanced. Solar wind abundances for carbon, nitrogen, oxygen, and neon correlate well with the photospheric values. The incorporation of minor ions into the solar wind appears to depend upon both the ionization times for the elements and the Coulomb drag exerted by the outflowing proton flux.

Coplan, M. A.↗

NASA NTRS1991

Tool For Robotic Resistive Roll Welding

Roll-welding attachment for robot simple, inexpensive device incorporating modified commercial resistance-welding gun. Modified welding gun easily attaches to end effector of robot. Robot applies welding force and moves electrode wheel along prescribed path. Resistance-welding current starts and stops automatically according to force exerted against workpiece. Used to apply brazing foil to workpiece.

Gilber, Jeffrey L.↗